! Started logfile: /vlbi/bp222/temp_maps//J0025-2602_S_dfm.log on Thu Feb 14 22:22:33 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/bp222/temp_maps//J0025-2602_S_uvm.fits
! Reading UV FITS file: /vlbi/bp222/temp_maps//J0025-2602_S_uvm.fits
! AN table 1: 68 integrations on 45 of 45 possible baselines.
! AN table 2: 46 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.844014 visibilities/baseline/integration-bin.
! Found source: J0025-2602
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 13592 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0025-2602_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 34 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 34 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 34 telescope corrections were flagged in sub-array 1.
!  A total of 69 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 575 telescope corrections were flagged in sub-array 1.
!  A total of 322 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.276171Jy  sigma=12.511371
! Fit after  self-cal, rms=0.710509Jy  sigma=6.877953
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.509 mas, bmaj=7.032 mas, bpa=-1.695 degrees
! Estimated noise=1.15346 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.344128 Jy
! Component: 100  -  total flux cleaned = 0.512387 Jy
! Total flux subtracted in 100 components = 0.512387 Jy
! Clean residual min=-0.039324 max=0.093324 Jy/beam
! Clean residual mean=0.000322 rms=0.013245 Jy/beam
! Combined flux in latest and established models = 0.512387 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.512387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.552503Jy  sigma=4.668268
! Fit after  self-cal, rms=0.552274Jy  sigma=4.665730
! Inverting map 
! Added new window around map position (-3.5, 7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110973 Jy
! Component: 100  -  total flux cleaned = 0.189274 Jy
! Total flux subtracted in 100 components = 0.189274 Jy
! Clean residual min=-0.034099 max=0.073732 Jy/beam
! Clean residual mean=0.000271 rms=0.010852 Jy/beam
! Combined flux in latest and established models = 0.701661 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 70 components and 0.701661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.495327Jy  sigma=4.072269
! Fit after  self-cal, rms=0.494731Jy  sigma=4.058308
! Inverting map 
! Added new window around map position (6, -6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0777775 Jy
! Component: 100  -  total flux cleaned = 0.135626 Jy
! Total flux subtracted in 100 components = 0.135626 Jy
! Clean residual min=-0.030684 max=0.047251 Jy/beam
! Clean residual mean=0.000220 rms=0.009536 Jy/beam
! Combined flux in latest and established models = 0.837286 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 102 components and 0.837286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.460554Jy  sigma=3.751295
! Fit after  self-cal, rms=0.459897Jy  sigma=3.745122
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.188 mas, bmaj=8.477 mas, bpa=-1.354 degrees
! Estimated noise=0.739043 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106388 Jy
! Component: 100  -  total flux cleaned = 0.178757 Jy
! Component: 150  -  total flux cleaned = 0.229917 Jy
! Component: 200  -  total flux cleaned = 0.266357 Jy
! Total flux subtracted in 200 components = 0.266357 Jy
! Clean residual min=-0.068514 max=0.075824 Jy/beam
! Clean residual mean=0.000258 rms=0.018939 Jy/beam
! Combined flux in latest and established models = 1.10364 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 145 components and 1.10364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.418329Jy  sigma=3.456634
! Fit after  self-cal, rms=0.417206Jy  sigma=3.446308
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.188 x 8.477 at -1.354 degrees (North through East)
! Clean map  min=-0.067001  max=0.41997 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.06     HN        1.05     KP        0.99     
!   LA        0.90     MK        0.99     NL        1.15     OV        0.97     
!   PT        1.03     SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        1.75     HN        1.01     LA        0.62     
!   NL        1.52     OV        1.09     PT        0.67     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.70     FD        1.06     HN        1.10     KP        1.00     
!   LA        0.84     MK        0.99     NL        1.26     OV        0.95     
!   PT        1.05     SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.46     FD        1.23     HN        1.07     LA        0.63     
!   NL        1.47     OV        1.08     PT        0.76     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.50     FD        1.03     HN        1.07     KP        1.02     
!   LA        0.86     MK        1.02     NL        1.20     OV        0.96     
!   PT        1.02     SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        1.07     HN        0.98     LA        0.57     
!   NL        1.57     OV        1.27     PT        0.76     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        8.50     HN        1.13     KP        1.00*    
!   LA        4.04     MK        1.00*    NL        1.00*    OV        1.09     
!   PT        1.01     SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    FD        0.00*    HN        0.00*    LA        0.00*    
!   NL        0.00*    OV        0.00*    PT        0.00*    
! 
! 
! Fit before self-cal, rms=0.417206Jy  sigma=3.446308
! Fit after  self-cal, rms=0.352774Jy  sigma=2.784466
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.213 mas, bmaj=8.591 mas, bpa=-1.423 degrees
! Estimated noise=0.765784 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00647699 Jy
! Component: 100  -  total flux cleaned = 0.003472 Jy
! Component: 150  -  total flux cleaned = 0.00095997 Jy
! Component: 200  -  total flux cleaned = 9.84011e-05 Jy
! Total flux subtracted in 200 components = 9.84011e-05 Jy
! Clean residual min=-0.051517 max=0.054727 Jy/beam
! Clean residual mean=-0.000277 rms=0.013465 Jy/beam
! Combined flux in latest and established models = 1.10374 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 153 components and 1.10374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.349618Jy  sigma=2.772657
! Fit after  self-cal, rms=0.350919Jy  sigma=2.753027
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.350919Jy  sigma=2.753027
! Fit after  self-cal, rms=0.433744Jy  sigma=2.604660
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.219 mas, bmaj=8.565 mas, bpa=-2.618 degrees
! Estimated noise=0.801946 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.019316 Jy
! Component: 100  -  total flux cleaned = 0.0172599 Jy
! Component: 150  -  total flux cleaned = 0.0168105 Jy
! Component: 200  -  total flux cleaned = 0.0160333 Jy
! Total flux subtracted in 200 components = 0.0160333 Jy
! Clean residual min=-0.047531 max=0.055100 Jy/beam
! Clean residual mean=-0.000378 rms=0.013193 Jy/beam
! Combined flux in latest and established models = 1.11978 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 159 components and 1.11978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.429613Jy  sigma=2.601021
! Fit after  self-cal, rms=0.429859Jy  sigma=2.599242
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141613 Jy
! Component: 100  -  total flux cleaned = 0.000374637 Jy
! Component: 150  -  total flux cleaned = -0.00058911 Jy
! Component: 200  -  total flux cleaned = -0.00147675 Jy
! Total flux subtracted in 200 components = -0.00147675 Jy
! Clean residual min=-0.047117 max=0.054760 Jy/beam
! Clean residual mean=-0.000376 rms=0.013169 Jy/beam
! Combined flux in latest and established models = 1.1183 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 167 components and 1.1183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.428454Jy  sigma=2.596335
! Fit after  self-cal, rms=0.428656Jy  sigma=2.595464
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.428656Jy  sigma=2.595464
! Fit after  self-cal, rms=0.441759Jy  sigma=2.386119
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.219 mas, bmaj=8.541 mas, bpa=-2.53 degrees
! Estimated noise=0.81821 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101232 Jy
! Component: 100  -  total flux cleaned = 0.0104915 Jy
! Component: 150  -  total flux cleaned = 0.0098292 Jy
! Component: 200  -  total flux cleaned = 0.00922159 Jy
! Total flux subtracted in 200 components = 0.00922159 Jy
! Clean residual min=-0.048354 max=0.053414 Jy/beam
! Clean residual mean=-0.000266 rms=0.012348 Jy/beam
! Combined flux in latest and established models = 1.12752 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 172 components and 1.12752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.439929Jy  sigma=2.383965
! Fit after  self-cal, rms=0.440148Jy  sigma=2.382607
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.5, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0473179 Jy
! Component: 100  -  total flux cleaned = 0.0624469 Jy
! Component: 150  -  total flux cleaned = 0.0689016 Jy
! Component: 200  -  total flux cleaned = 0.0730728 Jy
! Total flux subtracted in 200 components = 0.0730728 Jy
! Clean residual min=-0.043666 max=0.037393 Jy/beam
! Clean residual mean=-0.000344 rms=0.011611 Jy/beam
! Combined flux in latest and established models = 1.20059 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 224 components and 1.20059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.434312Jy  sigma=2.302756
! Fit after  self-cal, rms=0.433376Jy  sigma=2.294567
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.433376Jy  sigma=2.294567
! Fit after  self-cal, rms=0.440987Jy  sigma=2.279784
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.578 mas, bmaj=20.89 mas, bpa=-0.5327 degrees
! Estimated noise=1.02172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0286788 Jy
! Component: 100  -  total flux cleaned = 0.0384705 Jy
! Component: 150  -  total flux cleaned = 0.040494 Jy
! Component: 200  -  total flux cleaned = 0.0413796 Jy
! Total flux subtracted in 200 components = 0.0413796 Jy
! Clean residual min=-0.073809 max=0.058328 Jy/beam
! Clean residual mean=-0.000511 rms=0.019468 Jy/beam
! Combined flux in latest and established models = 1.24197 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 233 components and 1.24197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.439704Jy  sigma=2.266893
! Fit after  self-cal, rms=0.439392Jy  sigma=2.264635
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00410516 Jy
! Component: 100  -  total flux cleaned = 0.00489285 Jy
! Component: 150  -  total flux cleaned = 0.00490848 Jy
! Component: 200  -  total flux cleaned = 0.00489933 Jy
! Total flux subtracted in 200 components = 0.00489933 Jy
! Clean residual min=-0.073139 max=0.058043 Jy/beam
! Clean residual mean=-0.000524 rms=0.019390 Jy/beam
! Combined flux in latest and established models = 1.24687 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 239 components and 1.24687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.439104Jy  sigma=2.264175
! Fit after  self-cal, rms=0.438859Jy  sigma=2.263482
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.255 mas, bmaj=8.563 mas, bpa=-2.07 degrees
! Estimated noise=0.828442 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.255 x 8.563 at -2.07 degrees (North through East)
! Clean map  min=-0.044845  max=0.47701 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.519 mas, bmaj=6.971 mas, bpa=-2.547 degrees
! Estimated noise=1.3199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.388877 Jy
! Component: 100  -  total flux cleaned = 0.581725 Jy
! Component: 150  -  total flux cleaned = 0.704427 Jy
! Component: 200  -  total flux cleaned = 0.790997 Jy
! Total flux subtracted in 200 components = 0.790997 Jy
! Clean residual min=-0.032597 max=0.054066 Jy/beam
! Clean residual mean=0.000085 rms=0.009949 Jy/beam
! Combined flux in latest and established models = 0.790997 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 61 model components to the UV plane model.
! The established model now contains 61 components and 0.790997 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.255 mas, bmaj=8.563 mas, bpa=-2.07 degrees
! Estimated noise=0.828442 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.127677 Jy
! Component: 100  -  total flux cleaned = 0.213316 Jy
! Component: 150  -  total flux cleaned = 0.274405 Jy
! Component: 200  -  total flux cleaned = 0.319782 Jy
! Total flux subtracted in 200 components = 0.319782 Jy
! Clean residual min=-0.053158 max=0.034720 Jy/beam
! Clean residual mean=-0.000101 rms=0.012611 Jy/beam
! Combined flux in latest and established models = 1.11078 Jy
! Adding 85 model components to the UV plane model.
! The established model now contains 136 components and 1.11078 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.578 mas, bmaj=20.89 mas, bpa=-0.5327 degrees
! Estimated noise=1.02172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0539668 Jy
! Component: 100  -  total flux cleaned = 0.0871458 Jy
! Component: 150  -  total flux cleaned = 0.108084 Jy
! Component: 200  -  total flux cleaned = 0.117435 Jy
! Total flux subtracted in 200 components = 0.117435 Jy
! Clean residual min=-0.075265 max=0.055208 Jy/beam
! Clean residual mean=-0.000463 rms=0.019510 Jy/beam
! Combined flux in latest and established models = 1.22821 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00327692 Jy
! Component: 100  -  total flux cleaned = 0.00534739 Jy
! Component: 150  -  total flux cleaned = 0.00753594 Jy
! Component: 200  -  total flux cleaned = 0.00819898 Jy
! Total flux subtracted in 200 components = 0.00819898 Jy
! Clean residual min=-0.074180 max=0.056360 Jy/beam
! Clean residual mean=-0.000500 rms=0.019414 Jy/beam
! Combined flux in latest and established models = 1.23641 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 196 components and 1.23641 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.255 mas, bmaj=8.563 mas, bpa=-2.07 degrees
! Estimated noise=0.828442 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00681875 Jy
! Component: 100  -  total flux cleaned = 0.00783624 Jy
! Component: 150  -  total flux cleaned = 0.00824127 Jy
! Component: 200  -  total flux cleaned = 0.00864077 Jy
! Total flux subtracted in 200 components = 0.00864077 Jy
! Clean residual min=-0.044730 max=0.036440 Jy/beam
! Clean residual mean=-0.000268 rms=0.011276 Jy/beam
! Combined flux in latest and established models = 1.24505 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 208 components and 1.24506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.436886Jy  sigma=2.255362
! Fit after  self-cal, rms=0.436246Jy  sigma=2.252435
wmodel J0025-2602_S_map.mod
! Writing 208 model components to file: J0025-2602_S_map.mod
wobs   J0025-2602_S_uvs.fits
! Writing UV FITS file: J0025-2602_S_uvs.fits
wwins  J0025-2602_S_map.win
! wwins: Wrote 4 windows to J0025-2602_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0154268 Jy
! Component: 100  -  total flux cleaned = -0.0180908 Jy
! Component: 150  -  total flux cleaned = -0.020585 Jy
! Component: 200  -  total flux cleaned = -0.0264669 Jy
! Component: 250  -  total flux cleaned = -0.032695 Jy
! Component: 300  -  total flux cleaned = -0.038722 Jy
! Component: 350  -  total flux cleaned = -0.0429844 Jy
! Component: 400  -  total flux cleaned = -0.0471282 Jy
! Component: 450  -  total flux cleaned = -0.0516672 Jy
! Component: 500  -  total flux cleaned = -0.0551211 Jy
! Component: 550  -  total flux cleaned = -0.0585101 Jy
! Component: 600  -  total flux cleaned = -0.0608767 Jy
! Component: 650  -  total flux cleaned = -0.0613379 Jy
! Component: 700  -  total flux cleaned = -0.061803 Jy
! Component: 750  -  total flux cleaned = -0.0640583 Jy
! Component: 800  -  total flux cleaned = -0.0649388 Jy
! Component: 850  -  total flux cleaned = -0.0662464 Jy
! Component: 900  -  total flux cleaned = -0.0683751 Jy
! Component: 950  -  total flux cleaned = -0.0692122 Jy
! Component: 1000  -  total flux cleaned = -0.070865 Jy
! Component: 1050  -  total flux cleaned = -0.0728994 Jy
! Component: 1100  -  total flux cleaned = -0.0744921 Jy
! Component: 1150  -  total flux cleaned = -0.0752832 Jy
! Component: 1200  -  total flux cleaned = -0.076848 Jy
! Component: 1250  -  total flux cleaned = -0.0783918 Jy
! Component: 1300  -  total flux cleaned = -0.0799142 Jy
! Component: 1350  -  total flux cleaned = -0.0806633 Jy
! Component: 1400  -  total flux cleaned = -0.0821397 Jy
! Component: 1450  -  total flux cleaned = -0.0832337 Jy
! Component: 1500  -  total flux cleaned = -0.0832375 Jy
! Component: 1550  -  total flux cleaned = -0.0857377 Jy
! Component: 1600  -  total flux cleaned = -0.0860866 Jy
! Component: 1650  -  total flux cleaned = -0.0874836 Jy
! Component: 1700  -  total flux cleaned = -0.0885172 Jy
! Component: 1750  -  total flux cleaned = -0.0888604 Jy
! Component: 1800  -  total flux cleaned = -0.0891969 Jy
! Component: 1850  -  total flux cleaned = -0.0898649 Jy
! Component: 1900  -  total flux cleaned = -0.0908578 Jy
! Component: 1950  -  total flux cleaned = -0.0911814 Jy
! Component: 2000  -  total flux cleaned = -0.0911777 Jy
! Component: 2050  -  total flux cleaned = -0.092139 Jy
! Component: 2100  -  total flux cleaned = -0.0927682 Jy
! Component: 2150  -  total flux cleaned = -0.0918273 Jy
! Component: 2200  -  total flux cleaned = -0.0918318 Jy
! Component: 2250  -  total flux cleaned = -0.0930681 Jy
! Component: 2300  -  total flux cleaned = -0.0933713 Jy
! Component: 2350  -  total flux cleaned = -0.0936729 Jy
! Component: 2400  -  total flux cleaned = -0.09398 Jy
! Component: 2450  -  total flux cleaned = -0.0942783 Jy
! Component: 2500  -  total flux cleaned = -0.0948657 Jy
! Component: 2550  -  total flux cleaned = -0.0948647 Jy
! Component: 2600  -  total flux cleaned = -0.0951524 Jy
! Component: 2650  -  total flux cleaned = -0.0942894 Jy
! Component: 2700  -  total flux cleaned = -0.0942946 Jy
! Component: 2750  -  total flux cleaned = -0.0962735 Jy
! Component: 2800  -  total flux cleaned = -0.0962745 Jy
! Component: 2850  -  total flux cleaned = -0.0962736 Jy
! Component: 2900  -  total flux cleaned = -0.0957256 Jy
! Component: 2950  -  total flux cleaned = -0.0965493 Jy
! Component: 3000  -  total flux cleaned = -0.0960052 Jy
! Component: 3050  -  total flux cleaned = -0.0957361 Jy
! Component: 3100  -  total flux cleaned = -0.0954678 Jy
! Component: 3150  -  total flux cleaned = -0.094673 Jy
! Component: 3200  -  total flux cleaned = -0.09388 Jy
! Component: 3250  -  total flux cleaned = -0.0933595 Jy
! Component: 3300  -  total flux cleaned = -0.093103 Jy
! Component: 3350  -  total flux cleaned = -0.0918147 Jy
! Component: 3400  -  total flux cleaned = -0.0918163 Jy
! Component: 3450  -  total flux cleaned = -0.0905431 Jy
! Component: 3500  -  total flux cleaned = -0.090541 Jy
! Component: 3550  -  total flux cleaned = -0.0895337 Jy
! Component: 3600  -  total flux cleaned = -0.0895327 Jy
! Component: 3650  -  total flux cleaned = -0.0885408 Jy
! Component: 3700  -  total flux cleaned = -0.0882932 Jy
! Component: 3750  -  total flux cleaned = -0.087311 Jy
! Component: 3800  -  total flux cleaned = -0.0873112 Jy
! Component: 3850  -  total flux cleaned = -0.0863406 Jy
! Component: 3900  -  total flux cleaned = -0.0851363 Jy
! Component: 3950  -  total flux cleaned = -0.0837013 Jy
! Component: 4000  -  total flux cleaned = -0.0841795 Jy
! Component: 4050  -  total flux cleaned = -0.082997 Jy
! Total flux subtracted in 4096 components = -0.0829973 Jy
! Clean residual min=-0.014845 max=0.013308 Jy/beam
! Clean residual mean=-0.000139 rms=0.005739 Jy/beam
! Combined flux in latest and established models = 1.16206 Jy
keep
! Adding 628 model components to the UV plane model.
! The established model now contains 836 components and 1.16206 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/bp222/temp_maps//J0025-2602_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.255 x 8.563 at -2.07 degrees (North through East)
! Clean map  min=-0.035407  max=0.51011 Jy/beam
! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0025-2602_S_map.fits
wmodel /vlbi/bp222/temp_maps//J0025-2602_S_map.mod
! Writing 836 model components to file: /vlbi/bp222/temp_maps//J0025-2602_S_map.mod
wobs   /vlbi/bp222/temp_maps//J0025-2602_S_uvs.fits
! Writing UV FITS file: /vlbi/bp222/temp_maps//J0025-2602_S_uvs.fits
wwins  /vlbi/bp222/temp_maps//J0025-2602_S_map.win
! wwins: Wrote 5 windows to /vlbi/bp222/temp_maps//J0025-2602_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.510107 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00562318 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.30706 3.30706 6.61412 13.2282 26.4565 52.913
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0168 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.51 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  90.714 
quit
! Quitting program
! Log file /vlbi/bp222/temp_maps//J0025-2602_S_dfm.log closed on Thu Feb 14 22:22:38 2019