! Started logfile: /vlbi/bp222/temp_maps//J0019-3031_X_dfm.log on Thu Feb 14 22:22:26 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0019-3031_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0019-3031_X_uvm.fits ! AN table 1: 21 integrations on 45 of 45 possible baselines. ! AN table 2: 47 integrations on 36 of 36 possible baselines. ! AN table 3: 45 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.861688 visibilities/baseline/integration-bin. ! Found source: J0019-3031 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 40296 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0019-3031_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.052143Jy sigma=12.959256 ! Fit after self-cal, rms=0.700676Jy sigma=8.370565 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6799 mas, bmaj=1.79 mas, bpa=-7.951 degrees ! Estimated noise=0.719901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.226895 Jy ! Component: 100 - total flux cleaned = 0.280062 Jy ! Total flux subtracted in 100 components = 0.280062 Jy ! Clean residual min=-0.008478 max=0.021616 Jy/beam ! Clean residual mean=-0.000046 rms=0.002368 Jy/beam ! Combined flux in latest and established models = 0.280062 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.280062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094367Jy sigma=1.122846 ! Fit after self-cal, rms=0.094363Jy sigma=1.122772 ! Inverting map ! Added new window around map position (0.8, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245863 Jy ! Component: 100 - total flux cleaned = 0.0399347 Jy ! Total flux subtracted in 100 components = 0.0399347 Jy ! Clean residual min=-0.008473 max=0.013300 Jy/beam ! Clean residual mean=-0.000022 rms=0.001765 Jy/beam ! Combined flux in latest and established models = 0.319997 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 26 components and 0.319997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085250Jy sigma=0.946271 ! Fit after self-cal, rms=0.085246Jy sigma=0.945576 ! Inverting map ! Added new window around map position (0.8, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01245 Jy ! Component: 100 - total flux cleaned = 0.0204512 Jy ! Total flux subtracted in 100 components = 0.0204512 Jy ! Clean residual min=-0.007791 max=0.009478 Jy/beam ! Clean residual mean=-0.000009 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.340448 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.340448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083064Jy sigma=0.897710 ! Fit after self-cal, rms=0.083010Jy sigma=0.895901 ! Inverting map ! Added new window around map position (9.4, -24.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00869161 Jy ! Component: 100 - total flux cleaned = 0.0128563 Jy ! Total flux subtracted in 100 components = 0.0128563 Jy ! Clean residual min=-0.007939 max=0.008571 Jy/beam ! Clean residual mean=-0.000001 rms=0.001443 Jy/beam ! Combined flux in latest and established models = 0.353305 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.353305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082305Jy sigma=0.879732 ! Fit after self-cal, rms=0.082275Jy sigma=0.878195 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9701 mas, bmaj=2.574 mas, bpa=-7.32 degrees ! Estimated noise=0.306369 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058813 Jy ! Component: 100 - total flux cleaned = 0.00789168 Jy ! Component: 150 - total flux cleaned = 0.00833073 Jy ! Component: 200 - total flux cleaned = 0.00842774 Jy ! Total flux subtracted in 200 components = 0.00842774 Jy ! Clean residual min=-0.008526 max=0.006832 Jy/beam ! Clean residual mean=0.000024 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.361733 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 59 components and 0.361732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081933Jy sigma=0.868888 ! Fit after self-cal, rms=0.081929Jy sigma=0.868687 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9701 x 2.574 at -7.32 degrees (North through East) ! Clean map min=-0.0082024 max=0.29465 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 1.20 KP 0.96 ! LA 0.92 MK 0.92 NL 0.96 OV 0.98 ! PT 1.05 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 KP 1.02 LA 1.02 ! MK 0.97 NL 1.25 OV 0.90 PT 1.03 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.93 HN 1.11 LA 1.00 ! MK 1.27 NL 1.01 OV 0.93 PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.22 KP 0.97 ! LA 0.95 MK 0.94 NL 0.96 OV 0.95 ! PT 1.05 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 KP 1.02 LA 1.01 ! MK 1.00 NL 1.28 OV 0.92 PT 1.03 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.94 HN 1.12 LA 0.96 ! MK 1.21 NL 1.04 OV 0.94 PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.17 KP 0.96 ! LA 0.94 MK 0.96 NL 0.94 OV 0.96 ! PT 1.05 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 KP 1.02 LA 1.02 ! MK 1.00 NL 1.25 OV 0.91 PT 1.04 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.91 HN 1.08 LA 0.97 ! MK 1.26 NL 1.04 OV 0.95 PT 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.95 HN 1.20 KP 0.96 ! LA 0.94 MK 0.95 NL 0.96 OV 0.96 ! PT 1.06 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.97 KP 1.04 LA 1.02 ! MK 1.00 NL 1.26 OV 0.90 PT 1.04 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.94 HN 1.10 LA 0.97 ! MK 1.28 NL 1.02 OV 0.93 PT 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 1.15 KP 0.97 ! LA 0.95 MK 0.96 NL 0.95 OV 0.96 ! PT 1.06 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.97 KP 1.04 LA 1.04 ! MK 1.00 NL 1.25 OV 0.91 PT 1.05 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.96 HN 1.04 LA 0.99 ! MK 1.21 NL 1.01 OV 0.95 PT 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 1.13 KP 0.97 ! LA 0.95 MK 0.95 NL 0.96 OV 0.96 ! PT 1.08 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.98 KP 1.03 LA 1.04 ! MK 1.00 NL 1.27 OV 0.92 PT 1.07 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.96 HN 1.07 LA 1.00 ! MK 1.25 NL 1.00 OV 0.93 PT 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.20 KP 0.97 ! LA 0.93 MK 0.95 NL 0.97 OV 0.96 ! PT 1.06 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 KP 1.05 LA 1.04 ! MK 1.00 NL 1.22 OV 0.91 PT 1.03 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.92 HN 1.09 LA 0.99 ! MK 1.29 NL 1.02 OV 0.92 PT 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.16 KP 0.97 ! LA 0.94 MK 0.95 NL 0.99 OV 0.95 ! PT 1.06 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 KP 1.03 LA 1.03 ! MK 1.01 NL 1.26 OV 0.92 PT 1.04 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.95 HN 1.07 LA 1.01 ! MK 1.22 NL 1.02 OV 0.93 PT 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.95 HN 1.19 KP 0.98 ! LA 0.95 MK 0.96 NL 0.97 OV 0.95 ! PT 1.09 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 KP 1.04 LA 1.01 ! MK 1.00 NL 1.28 OV 0.93 PT 1.04 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.93 HN 1.05 LA 0.98 ! MK 1.16 NL 1.06 OV 0.95 PT 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 1.20 KP 0.97 ! LA 0.94 MK 0.98 NL 0.97 OV 0.93 ! PT 1.08 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 KP 1.05 LA 1.05 ! MK 1.01 NL 1.28 OV 0.91 PT 1.05 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.97 HN 1.03 LA 1.01 ! MK 1.18 NL 1.08 OV 0.93 PT 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.17 KP 0.97 ! LA 0.94 MK 0.95 NL 0.99 OV 0.95 ! PT 1.08 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 KP 1.03 LA 1.03 ! MK 1.00 NL 1.26 OV 0.93 PT 1.05 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.95 HN 1.04 LA 1.01 ! MK 1.17 NL 1.03 OV 0.93 PT 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.23 KP 0.98 ! LA 0.93 MK 0.93 NL 0.99 OV 0.96 ! PT 1.07 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 KP 1.03 LA 1.04 ! MK 0.99 NL 1.27 OV 0.93 PT 1.05 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.93 HN 1.08 LA 1.01 ! MK 1.01 NL 1.05 OV 0.93 PT 0.99 ! ! ! Fit before self-cal, rms=0.081929Jy sigma=0.868687 ! Fit after self-cal, rms=0.079522Jy sigma=0.776432 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9788 mas, bmaj=2.593 mas, bpa=-7.16 degrees ! Estimated noise=0.307599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00455779 Jy ! Component: 100 - total flux cleaned = -0.00531121 Jy ! Component: 150 - total flux cleaned = -0.00555721 Jy ! Component: 200 - total flux cleaned = -0.00577684 Jy ! Total flux subtracted in 200 components = -0.00577684 Jy ! Clean residual min=-0.002991 max=0.002091 Jy/beam ! Clean residual mean=-0.000005 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.355956 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.355956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079198Jy sigma=0.773307 ! Fit after self-cal, rms=0.079242Jy sigma=0.772575 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079242Jy sigma=0.772575 ! Fit after self-cal, rms=0.079691Jy sigma=0.771445 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.98 mas, bmaj=2.597 mas, bpa=-7.251 degrees ! Estimated noise=0.307353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00280175 Jy ! Component: 100 - total flux cleaned = -0.00335295 Jy ! Component: 150 - total flux cleaned = -0.0035908 Jy ! Component: 200 - total flux cleaned = -0.00380287 Jy ! Total flux subtracted in 200 components = -0.00380287 Jy ! Clean residual min=-0.002562 max=0.001861 Jy/beam ! Clean residual mean=-0.000007 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.352153 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.352153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079550Jy sigma=0.770249 ! Fit after self-cal, rms=0.079525Jy sigma=0.770018 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000868998 Jy ! Component: 100 - total flux cleaned = -0.000991495 Jy ! Component: 150 - total flux cleaned = -0.00102816 Jy ! Component: 200 - total flux cleaned = -0.00108929 Jy ! Total flux subtracted in 200 components = -0.00108929 Jy ! Clean residual min=-0.002409 max=0.001785 Jy/beam ! Clean residual mean=-0.000009 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.351063 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.351063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079480Jy sigma=0.769640 ! Fit after self-cal, rms=0.079467Jy sigma=0.769584 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079467Jy sigma=0.769584 ! Fit after self-cal, rms=0.079968Jy sigma=0.763524 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9812 mas, bmaj=2.597 mas, bpa=-7.289 degrees ! Estimated noise=0.307174 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00164487 Jy ! Component: 100 - total flux cleaned = -0.00194695 Jy ! Component: 150 - total flux cleaned = -0.00213846 Jy ! Component: 200 - total flux cleaned = -0.00230903 Jy ! Total flux subtracted in 200 components = -0.00230903 Jy ! Clean residual min=-0.001293 max=0.001175 Jy/beam ! Clean residual mean=-0.000002 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.348754 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 82 components and 0.348754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079911Jy sigma=0.763091 ! Fit after self-cal, rms=0.079920Jy sigma=0.762978 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000507812 Jy ! Component: 100 - total flux cleaned = -0.000644196 Jy ! Component: 150 - total flux cleaned = -0.000713787 Jy ! Component: 200 - total flux cleaned = -0.00077636 Jy ! Total flux subtracted in 200 components = -0.00077636 Jy ! Clean residual min=-0.001157 max=0.001132 Jy/beam ! Clean residual mean=-0.000003 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.347978 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.347978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079898Jy sigma=0.762818 ! Fit after self-cal, rms=0.079891Jy sigma=0.762794 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079891Jy sigma=0.762794 ! Fit after self-cal, rms=0.080246Jy sigma=0.762584 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.508 mas, bmaj=6.64 mas, bpa=1.762 degrees ! Estimated noise=0.337714 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00094056 Jy ! Component: 100 - total flux cleaned = -0.00112971 Jy ! Component: 150 - total flux cleaned = -0.00115801 Jy ! Component: 200 - total flux cleaned = -0.00117002 Jy ! Total flux subtracted in 200 components = -0.00117002 Jy ! Clean residual min=-0.001058 max=0.001071 Jy/beam ! Clean residual mean=-0.000003 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.346808 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 93 components and 0.346808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080233Jy sigma=0.762499 ! Fit after self-cal, rms=0.080230Jy sigma=0.762457 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125643 Jy ! Component: 100 - total flux cleaned = -0.000199078 Jy ! Component: 150 - total flux cleaned = -0.00023329 Jy ! Component: 200 - total flux cleaned = -0.00023275 Jy ! Total flux subtracted in 200 components = -0.00023275 Jy ! Clean residual min=-0.001035 max=0.001081 Jy/beam ! Clean residual mean=-0.000004 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.346575 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 97 components and 0.346575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080226Jy sigma=0.762441 ! Fit after self-cal, rms=0.080220Jy sigma=0.762419 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.982 mas, bmaj=2.597 mas, bpa=-7.302 degrees ! Estimated noise=0.307057 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.982 x 2.597 at -7.302 degrees (North through East) ! Clean map min=-0.0028965 max=0.29847 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6844 mas, bmaj=1.798 mas, bpa=-7.67 degrees ! Estimated noise=0.733871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.231169 Jy ! Component: 100 - total flux cleaned = 0.284304 Jy ! Component: 150 - total flux cleaned = 0.306214 Jy ! Component: 200 - total flux cleaned = 0.318864 Jy ! Total flux subtracted in 200 components = 0.318864 Jy ! Clean residual min=-0.003096 max=0.006701 Jy/beam ! Clean residual mean=-0.000019 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.318864 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.318864 Jy ! Inverting map and beam ! Estimated beam: bmin=0.982 mas, bmaj=2.597 mas, bpa=-7.302 degrees ! Estimated noise=0.307057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130735 Jy ! Component: 100 - total flux cleaned = 0.0192345 Jy ! Component: 150 - total flux cleaned = 0.022473 Jy ! Component: 200 - total flux cleaned = 0.0244203 Jy ! Total flux subtracted in 200 components = 0.0244203 Jy ! Clean residual min=-0.001224 max=0.002088 Jy/beam ! Clean residual mean=-0.000008 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.343284 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 58 components and 0.343284 Jy ! Inverting map ! Added new window around map position (-1.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018494 Jy ! Component: 100 - total flux cleaned = 0.00277832 Jy ! Component: 150 - total flux cleaned = 0.00309089 Jy ! Component: 200 - total flux cleaned = 0.00327279 Jy ! Total flux subtracted in 200 components = 0.00327279 Jy ! Clean residual min=-0.001115 max=0.001176 Jy/beam ! Clean residual mean=-0.000002 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.346557 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.346557 Jy ! Inverting map ! Added new window around map position (-1.4, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00054916 Jy ! Component: 100 - total flux cleaned = 0.000550099 Jy ! Component: 150 - total flux cleaned = 0.000550043 Jy ! Component: 200 - total flux cleaned = 0.000549898 Jy ! Total flux subtracted in 200 components = 0.000549898 Jy ! Clean residual min=-0.001117 max=0.001148 Jy/beam ! Clean residual mean=-0.000001 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.347107 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 89 components and 0.347107 Jy ! Inverting map ! Added new window around map position (6.8, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000743011 Jy ! Component: 100 - total flux cleaned = 0.000766469 Jy ! Component: 150 - total flux cleaned = 0.000766874 Jy ! Component: 200 - total flux cleaned = 0.000767539 Jy ! Total flux subtracted in 200 components = 0.000767539 Jy ! Clean residual min=-0.001046 max=0.001005 Jy/beam ! Clean residual mean=-0.000000 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.347874 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 104 components and 0.347874 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.508 mas, bmaj=6.64 mas, bpa=1.762 degrees ! Estimated noise=0.337714 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000335724 Jy ! Component: 100 - total flux cleaned = 0.000350495 Jy ! Component: 150 - total flux cleaned = 0.000378225 Jy ! Component: 200 - total flux cleaned = 0.000378216 Jy ! Total flux subtracted in 200 components = 0.000378216 Jy ! Clean residual min=-0.000976 max=0.001125 Jy/beam ! Clean residual mean=0.000001 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.348253 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.04403e-07 Jy ! Component: 100 - total flux cleaned = -9.53393e-06 Jy ! Component: 150 - total flux cleaned = -9.57313e-06 Jy ! Component: 200 - total flux cleaned = -2.67902e-05 Jy ! Total flux subtracted in 200 components = -2.67902e-05 Jy ! Clean residual min=-0.000975 max=0.001134 Jy/beam ! Clean residual mean=0.000001 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.348226 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 122 components and 0.348226 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.982 mas, bmaj=2.597 mas, bpa=-7.302 degrees ! Estimated noise=0.307057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.78761e-05 Jy ! Component: 100 - total flux cleaned = -7.68868e-05 Jy ! Component: 150 - total flux cleaned = -0.000113561 Jy ! Component: 200 - total flux cleaned = -0.000148341 Jy ! Total flux subtracted in 200 components = -0.000148341 Jy ! Clean residual min=-0.001030 max=0.000964 Jy/beam ! Clean residual mean=0.000000 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.348077 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 132 components and 0.348077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080114Jy sigma=0.761662 ! Fit after self-cal, rms=0.080089Jy sigma=0.761533 wmodel J0019-3031_X_map.mod ! Writing 132 model components to file: J0019-3031_X_map.mod wobs J0019-3031_X_uvs.fits ! Writing UV FITS file: J0019-3031_X_uvs.fits wwins J0019-3031_X_map.win ! wwins: Wrote 7 windows to J0019-3031_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151114 Jy ! Component: 100 - total flux cleaned = -0.000116243 Jy ! Component: 150 - total flux cleaned = -9.96668e-05 Jy ! Component: 200 - total flux cleaned = -8.39814e-05 Jy ! Component: 250 - total flux cleaned = -9.96341e-05 Jy ! Component: 300 - total flux cleaned = -8.41945e-05 Jy ! Component: 350 - total flux cleaned = -2.48224e-05 Jy ! Component: 400 - total flux cleaned = -1.03154e-05 Jy ! Component: 450 - total flux cleaned = -2.45156e-05 Jy ! Component: 500 - total flux cleaned = -2.4644e-05 Jy ! Component: 550 - total flux cleaned = -1.10589e-05 Jy ! Component: 600 - total flux cleaned = -6.55165e-05 Jy ! Component: 650 - total flux cleaned = -0.000118851 Jy ! Component: 700 - total flux cleaned = -9.25875e-05 Jy ! Component: 750 - total flux cleaned = -7.95815e-05 Jy ! Component: 800 - total flux cleaned = -0.000118169 Jy ! Component: 850 - total flux cleaned = -0.000131088 Jy ! Component: 900 - total flux cleaned = -9.35349e-05 Jy ! Component: 950 - total flux cleaned = -8.12328e-05 Jy ! Component: 1000 - total flux cleaned = -3.22008e-05 Jy ! Component: 1050 - total flux cleaned = 4.02583e-06 Jy ! Component: 1100 - total flux cleaned = 1.59829e-05 Jy ! Component: 1150 - total flux cleaned = 5.15743e-05 Jy ! Component: 1200 - total flux cleaned = 9.87834e-05 Jy ! Component: 1250 - total flux cleaned = 9.8846e-05 Jy ! Component: 1300 - total flux cleaned = 0.000156492 Jy ! Component: 1350 - total flux cleaned = 0.000144945 Jy ! Component: 1400 - total flux cleaned = 0.000156324 Jy ! Component: 1450 - total flux cleaned = 0.000167602 Jy ! Component: 1500 - total flux cleaned = 0.000201223 Jy ! Component: 1550 - total flux cleaned = 0.000201139 Jy ! Component: 1600 - total flux cleaned = 0.000179034 Jy ! Component: 1650 - total flux cleaned = 0.000190126 Jy ! Component: 1700 - total flux cleaned = 0.000211769 Jy ! Component: 1750 - total flux cleaned = 0.000254679 Jy ! Component: 1800 - total flux cleaned = 0.000265221 Jy ! Component: 1850 - total flux cleaned = 0.000265151 Jy ! Component: 1900 - total flux cleaned = 0.000254614 Jy ! Component: 1950 - total flux cleaned = 0.000317376 Jy ! Component: 2000 - total flux cleaned = 0.000286313 Jy ! Component: 2050 - total flux cleaned = 0.000327655 Jy ! Component: 2100 - total flux cleaned = 0.000358302 Jy ! Component: 2150 - total flux cleaned = 0.000378641 Jy ! Component: 2200 - total flux cleaned = 0.000368566 Jy ! Component: 2250 - total flux cleaned = 0.000368635 Jy ! Component: 2300 - total flux cleaned = 0.000408522 Jy ! Component: 2350 - total flux cleaned = 0.000418336 Jy ! Component: 2400 - total flux cleaned = 0.000379003 Jy ! Component: 2450 - total flux cleaned = 0.00037909 Jy ! Component: 2500 - total flux cleaned = 0.000379135 Jy ! Component: 2550 - total flux cleaned = 0.000379156 Jy ! Component: 2600 - total flux cleaned = 0.000388702 Jy ! Component: 2650 - total flux cleaned = 0.000407927 Jy ! Component: 2700 - total flux cleaned = 0.0003984 Jy ! Component: 2750 - total flux cleaned = 0.00041743 Jy ! Component: 2800 - total flux cleaned = 0.000445785 Jy ! Component: 2850 - total flux cleaned = 0.000483369 Jy ! Component: 2900 - total flux cleaned = 0.000445987 Jy ! Component: 2950 - total flux cleaned = 0.000445912 Jy ! Component: 3000 - total flux cleaned = 0.000510767 Jy ! Component: 3050 - total flux cleaned = 0.000538374 Jy ! Component: 3100 - total flux cleaned = 0.000529154 Jy ! Component: 3150 - total flux cleaned = 0.000538242 Jy ! Component: 3200 - total flux cleaned = 0.000565528 Jy ! Component: 3250 - total flux cleaned = 0.000583665 Jy ! Component: 3300 - total flux cleaned = 0.000574667 Jy ! Component: 3350 - total flux cleaned = 0.00061948 Jy ! Component: 3400 - total flux cleaned = 0.000655047 Jy ! Component: 3450 - total flux cleaned = 0.000672736 Jy ! Component: 3500 - total flux cleaned = 0.00068162 Jy ! Component: 3550 - total flux cleaned = 0.000690432 Jy ! Component: 3600 - total flux cleaned = 0.000751691 Jy ! Component: 3650 - total flux cleaned = 0.000769166 Jy ! Component: 3700 - total flux cleaned = 0.000786556 Jy ! Component: 3750 - total flux cleaned = 0.00082115 Jy ! Component: 3800 - total flux cleaned = 0.000872729 Jy ! Component: 3850 - total flux cleaned = 0.000872761 Jy ! Component: 3900 - total flux cleaned = 0.000906836 Jy ! Component: 3950 - total flux cleaned = 0.000906842 Jy ! Component: 4000 - total flux cleaned = 0.000923729 Jy ! Component: 4050 - total flux cleaned = 0.000940546 Jy ! Total flux subtracted in 4096 components = 0.000965676 Jy ! Clean residual min=-0.000509 max=0.000480 Jy/beam ! Clean residual mean=0.000001 rms=0.000153 Jy/beam ! Combined flux in latest and established models = 0.349043 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 413 components and 0.349043 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0019-3031_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.982 x 2.597 at -7.302 degrees (North through East) ! Clean map min=-0.00086834 max=0.30286 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0019-3031_X_map.fits wmodel /vlbi/bp222/temp_maps//J0019-3031_X_map.mod ! Writing 413 model components to file: /vlbi/bp222/temp_maps//J0019-3031_X_map.mod wobs /vlbi/bp222/temp_maps//J0019-3031_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0019-3031_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0019-3031_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/temp_maps//J0019-3031_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.302859 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151609 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.150178 0.150178 0.300355 0.60071 1.20142 2.40284 4.80568 9.61136 19.2227 38.4454 76.8909 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.302 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1997.64 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0019-3031_X_dfm.log closed on Thu Feb 14 22:22:32 2019