! Started logfile: /vlbi/bp222/temp_maps//J0016-0015_X_dfm.log on Thu Feb 14 22:22:13 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J0016-0015_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J0016-0015_X_uvm.fits ! AN table 1: 32 integrations on 28 of 28 possible baselines. ! AN table 2: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.95288 visibilities/baseline/integration-bin. ! Found source: J0016-0015 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 34944 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0016-0015_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.056631Jy sigma=15.963509 ! Fit after self-cal, rms=0.698723Jy sigma=10.554240 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6608 mas, bmaj=1.788 mas, bpa=-5.995 degrees ! Estimated noise=0.421261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.219817 Jy ! Component: 100 - total flux cleaned = 0.288858 Jy ! Total flux subtracted in 100 components = 0.288858 Jy ! Clean residual min=-0.013302 max=0.028975 Jy/beam ! Clean residual mean=0.000001 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 0.288858 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.288858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092962Jy sigma=1.308242 ! Fit after self-cal, rms=0.092898Jy sigma=1.307425 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030389 Jy ! Component: 100 - total flux cleaned = 0.046658 Jy ! Total flux subtracted in 100 components = 0.046658 Jy ! Clean residual min=-0.007433 max=0.008451 Jy/beam ! Clean residual mean=0.000002 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.335516 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.335516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078012Jy sigma=1.027233 ! Fit after self-cal, rms=0.077964Jy sigma=1.026405 ! Inverting map ! Added new window around map position (0.8, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110345 Jy ! Component: 100 - total flux cleaned = 0.0190516 Jy ! Total flux subtracted in 100 components = 0.0190516 Jy ! Clean residual min=-0.006598 max=0.006330 Jy/beam ! Clean residual mean=0.000002 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.354568 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.354568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075224Jy sigma=0.965359 ! Fit after self-cal, rms=0.075194Jy sigma=0.964948 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8328 mas, bmaj=2.125 mas, bpa=-6.196 degrees ! Estimated noise=0.265847 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124186 Jy ! Component: 100 - total flux cleaned = 0.0203682 Jy ! Component: 150 - total flux cleaned = 0.0259732 Jy ! Component: 200 - total flux cleaned = 0.0300694 Jy ! Total flux subtracted in 200 components = 0.0300694 Jy ! Clean residual min=-0.006019 max=0.008099 Jy/beam ! Clean residual mean=0.000004 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.384637 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 58 components and 0.384637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073445Jy sigma=0.913484 ! Fit after self-cal, rms=0.073416Jy sigma=0.913023 ! Inverting map ! Added new window around map position (-2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00663499 Jy ! Component: 100 - total flux cleaned = 0.00982998 Jy ! Component: 150 - total flux cleaned = 0.0111018 Jy ! Component: 200 - total flux cleaned = 0.0119648 Jy ! Total flux subtracted in 200 components = 0.0119648 Jy ! Clean residual min=-0.005133 max=0.006500 Jy/beam ! Clean residual mean=0.000004 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.396602 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 82 components and 0.396602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072470Jy sigma=0.902063 ! Fit after self-cal, rms=0.072435Jy sigma=0.901108 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8328 x 2.125 at -6.196 degrees (North through East) ! Clean map min=-0.0047102 max=0.29525 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.02 LA 1.09 ! MK 0.93 NL 1.27 OV 1.01 PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 HN 0.94 KP 1.03 ! LA 1.00 MK 1.04 NL 1.00 OV 0.94 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.03 LA 1.10 ! MK 0.93 NL 1.43 OV 1.02 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HN 0.93 KP 1.02 ! LA 1.01 MK 1.04 NL 0.98 OV 0.94 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 0.99 LA 1.11 ! MK 0.94 NL 1.30 OV 1.01 PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 HN 0.96 KP 1.04 ! LA 1.00 MK 1.04 NL 1.00 OV 0.94 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 0.99 LA 1.11 ! MK 0.95 NL 1.29 OV 1.02 PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 HN 0.91 KP 1.02 ! LA 1.02 MK 1.03 NL 1.01 OV 0.94 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00 LA 1.13 ! MK 0.93 NL 1.37 OV 1.01 PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HN 0.94 KP 1.03 ! LA 1.00 MK 1.06 NL 0.98 OV 0.95 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.03 LA 1.11 ! MK 0.94 NL 1.40 OV 1.00 PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 0.92 KP 1.03 ! LA 1.00 MK 1.03 NL 0.97 OV 0.95 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.06 LA 1.11 ! MK 0.93 NL 1.38 OV 1.02 PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 HN 0.94 KP 1.04 ! LA 1.00 MK 1.03 NL 0.98 OV 0.94 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.01 LA 1.14 ! MK 0.95 NL 1.34 OV 1.04 PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HN 0.96 KP 1.03 ! LA 1.00 MK 1.05 NL 1.00 OV 0.93 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.00 LA 1.12 ! MK 0.91 NL 1.41 OV 1.03 PT 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 0.94 KP 1.02 ! LA 1.00 MK 1.04 NL 0.99 OV 0.95 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.04 LA 1.12 ! MK 0.91 NL 1.40 OV 1.01 PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 HN 0.92 KP 1.03 ! LA 1.00 MK 1.05 NL 0.97 OV 0.94 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.94 HN 1.05 LA 1.13 ! MK 0.90 NL 1.40 OV 1.03 PT 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 HN 0.91 KP 1.03 ! LA 1.00 MK 1.03 NL 0.98 OV 0.94 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.02 LA 1.16 ! MK 0.89 NL 1.40 OV 1.02 PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.01 HN 0.91 KP 1.03 ! LA 0.98 MK 1.02 NL 0.99 OV 0.96 ! PT 0.96 SC 1.00 ! ! ! Fit before self-cal, rms=0.072435Jy sigma=0.901108 ! Fit after self-cal, rms=0.070651Jy sigma=0.840307 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8363 mas, bmaj=2.13 mas, bpa=-6.22 degrees ! Estimated noise=0.265858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313348 Jy ! Component: 100 - total flux cleaned = 0.0044109 Jy ! Component: 150 - total flux cleaned = 0.00536772 Jy ! Component: 200 - total flux cleaned = 0.00591498 Jy ! Total flux subtracted in 200 components = 0.00591498 Jy ! Clean residual min=-0.001558 max=0.002159 Jy/beam ! Clean residual mean=0.000000 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.402517 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 114 components and 0.402517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070462Jy sigma=0.837317 ! Fit after self-cal, rms=0.070567Jy sigma=0.837049 ! Inverting map ! Added new window around map position (4.2, 5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020399 Jy ! Component: 100 - total flux cleaned = 0.00270212 Jy ! Component: 150 - total flux cleaned = 0.00307262 Jy ! Component: 200 - total flux cleaned = 0.00333209 Jy ! Total flux subtracted in 200 components = 0.00333209 Jy ! Clean residual min=-0.001428 max=0.001906 Jy/beam ! Clean residual mean=0.000000 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.405849 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 141 components and 0.405849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070489Jy sigma=0.835713 ! Fit after self-cal, rms=0.070481Jy sigma=0.835656 ! Inverting map ! Added new window around map position (-1.4, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177341 Jy ! Component: 100 - total flux cleaned = 0.00289083 Jy ! Component: 150 - total flux cleaned = 0.0036412 Jy ! Component: 200 - total flux cleaned = 0.00421944 Jy ! Total flux subtracted in 200 components = 0.00421944 Jy ! Clean residual min=-0.001348 max=0.001351 Jy/beam ! Clean residual mean=0.000000 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.410069 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 159 components and 0.410069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070414Jy sigma=0.834633 ! Fit after self-cal, rms=0.070416Jy sigma=0.834610 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070416Jy sigma=0.834610 ! Fit after self-cal, rms=0.070420Jy sigma=0.833345 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8363 mas, bmaj=2.131 mas, bpa=-6.241 degrees ! Estimated noise=0.266037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000971413 Jy ! Component: 100 - total flux cleaned = 0.00174185 Jy ! Component: 150 - total flux cleaned = 0.0023205 Jy ! Component: 200 - total flux cleaned = 0.00277591 Jy ! Total flux subtracted in 200 components = 0.00277591 Jy ! Clean residual min=-0.001265 max=0.001245 Jy/beam ! Clean residual mean=-0.000000 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.412844 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 180 components and 0.412844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070392Jy sigma=0.832931 ! Fit after self-cal, rms=0.070394Jy sigma=0.832920 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000530568 Jy ! Component: 100 - total flux cleaned = 0.000889592 Jy ! Component: 150 - total flux cleaned = 0.00111571 Jy ! Component: 200 - total flux cleaned = 0.00133049 Jy ! Total flux subtracted in 200 components = 0.00133049 Jy ! Clean residual min=-0.001257 max=0.001232 Jy/beam ! Clean residual mean=-0.000000 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.414175 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 190 components and 0.414175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070379Jy sigma=0.832690 ! Fit after self-cal, rms=0.070379Jy sigma=0.832687 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070379Jy sigma=0.832687 ! Fit after self-cal, rms=0.070373Jy sigma=0.827473 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8359 mas, bmaj=2.131 mas, bpa=-6.245 degrees ! Estimated noise=0.266035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000743102 Jy ! Component: 100 - total flux cleaned = 0.00133574 Jy ! Component: 150 - total flux cleaned = 0.0016921 Jy ! Component: 200 - total flux cleaned = 0.00200083 Jy ! Total flux subtracted in 200 components = 0.00200083 Jy ! Clean residual min=-0.000978 max=0.001117 Jy/beam ! Clean residual mean=-0.000000 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.416176 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 206 components and 0.416176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070358Jy sigma=0.827216 ! Fit after self-cal, rms=0.070371Jy sigma=0.827201 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.8, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848202 Jy ! Component: 100 - total flux cleaned = 0.00105134 Jy ! Component: 150 - total flux cleaned = 0.00131937 Jy ! Component: 200 - total flux cleaned = 0.0015297 Jy ! Total flux subtracted in 200 components = 0.0015297 Jy ! Clean residual min=-0.000977 max=0.000914 Jy/beam ! Clean residual mean=-0.000000 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.417705 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 226 components and 0.417705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070352Jy sigma=0.826859 ! Fit after self-cal, rms=0.070349Jy sigma=0.826853 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070349Jy sigma=0.826853 ! Fit after self-cal, rms=0.070332Jy sigma=0.826832 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.064 mas, bmaj=3.469 mas, bpa=3.791 degrees ! Estimated noise=0.350705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000729114 Jy ! Component: 100 - total flux cleaned = 0.00118955 Jy ! Component: 150 - total flux cleaned = 0.00147044 Jy ! Component: 200 - total flux cleaned = 0.00170161 Jy ! Total flux subtracted in 200 components = 0.00170161 Jy ! Clean residual min=-0.001114 max=0.001175 Jy/beam ! Clean residual mean=-0.000000 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.419407 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 247 components and 0.419407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070326Jy sigma=0.826770 ! Fit after self-cal, rms=0.070325Jy sigma=0.826762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202853 Jy ! Component: 100 - total flux cleaned = 0.000332151 Jy ! Component: 150 - total flux cleaned = 0.000438199 Jy ! Component: 200 - total flux cleaned = 0.000524929 Jy ! Total flux subtracted in 200 components = 0.000524929 Jy ! Clean residual min=-0.001127 max=0.001127 Jy/beam ! Clean residual mean=-0.000000 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.419932 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 265 components and 0.419932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070322Jy sigma=0.826725 ! Fit after self-cal, rms=0.070322Jy sigma=0.826723 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8358 mas, bmaj=2.131 mas, bpa=-6.245 degrees ! Estimated noise=0.265973 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8358 x 2.131 at -6.245 degrees (North through East) ! Clean map min=-0.0012159 max=0.295 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6624 mas, bmaj=1.794 mas, bpa=-6.13 degrees ! Estimated noise=0.421142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.219641 Jy ! Component: 100 - total flux cleaned = 0.288993 Jy ! Component: 150 - total flux cleaned = 0.319323 Jy ! Component: 200 - total flux cleaned = 0.33575 Jy ! Total flux subtracted in 200 components = 0.33575 Jy ! Clean residual min=-0.004065 max=0.008564 Jy/beam ! Clean residual mean=0.000000 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.33575 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.33575 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8358 mas, bmaj=2.131 mas, bpa=-6.245 degrees ! Estimated noise=0.265973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190528 Jy ! Component: 100 - total flux cleaned = 0.0302699 Jy ! Component: 150 - total flux cleaned = 0.0381147 Jy ! Component: 200 - total flux cleaned = 0.0441484 Jy ! Total flux subtracted in 200 components = 0.0441484 Jy ! Clean residual min=-0.002467 max=0.003927 Jy/beam ! Clean residual mean=0.000001 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.379899 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 63 components and 0.379899 Jy ! Inverting map ! Added new window around map position (0, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00486851 Jy ! Component: 100 - total flux cleaned = 0.00879796 Jy ! Component: 150 - total flux cleaned = 0.0120535 Jy ! Component: 200 - total flux cleaned = 0.0148068 Jy ! Total flux subtracted in 200 components = 0.0148068 Jy ! Clean residual min=-0.001990 max=0.001923 Jy/beam ! Clean residual mean=0.000000 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.394706 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 102 components and 0.394706 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.064 mas, bmaj=3.469 mas, bpa=3.791 degrees ! Estimated noise=0.350705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430072 Jy ! Component: 100 - total flux cleaned = 0.00742154 Jy ! Component: 150 - total flux cleaned = 0.00992702 Jy ! Component: 200 - total flux cleaned = 0.0119667 Jy ! Total flux subtracted in 200 components = 0.0119667 Jy ! Clean residual min=-0.001749 max=0.001749 Jy/beam ! Clean residual mean=0.000000 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.406673 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170951 Jy ! Component: 100 - total flux cleaned = 0.00316422 Jy ! Component: 150 - total flux cleaned = 0.00442167 Jy ! Component: 200 - total flux cleaned = 0.00553246 Jy ! Total flux subtracted in 200 components = 0.00553246 Jy ! Clean residual min=-0.001399 max=0.001433 Jy/beam ! Clean residual mean=-0.000000 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.412205 Jy ! Adding 106 model components to the UV plane model. ! The established model now contains 193 components and 0.412205 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8358 mas, bmaj=2.131 mas, bpa=-6.245 degrees ! Estimated noise=0.265973 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126522 Jy ! Component: 100 - total flux cleaned = 0.00203662 Jy ! Component: 150 - total flux cleaned = 0.00239658 Jy ! Component: 200 - total flux cleaned = 0.00275673 Jy ! Total flux subtracted in 200 components = 0.00275673 Jy ! Clean residual min=-0.001204 max=0.000993 Jy/beam ! Clean residual mean=-0.000000 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.414962 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 220 components and 0.414962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070360Jy sigma=0.827240 ! Fit after self-cal, rms=0.070351Jy sigma=0.827153 wmodel J0016-0015_X_map.mod ! Writing 220 model components to file: J0016-0015_X_map.mod wobs J0016-0015_X_uvs.fits ! Writing UV FITS file: J0016-0015_X_uvs.fits wwins J0016-0015_X_map.win ! wwins: Wrote 8 windows to J0016-0015_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000386299 Jy ! Component: 100 - total flux cleaned = -0.000511791 Jy ! Component: 150 - total flux cleaned = -0.000528905 Jy ! Component: 200 - total flux cleaned = -0.000528784 Jy ! Component: 250 - total flux cleaned = -0.000576087 Jy ! Component: 300 - total flux cleaned = -0.000636974 Jy ! Component: 350 - total flux cleaned = -0.000666975 Jy ! Component: 400 - total flux cleaned = -0.000754598 Jy ! Component: 450 - total flux cleaned = -0.000811925 Jy ! Component: 500 - total flux cleaned = -0.000896468 Jy ! Component: 550 - total flux cleaned = -0.000993359 Jy ! Component: 600 - total flux cleaned = -0.00104783 Jy ! Component: 650 - total flux cleaned = -0.00115497 Jy ! Component: 700 - total flux cleaned = -0.00123433 Jy ! Component: 750 - total flux cleaned = -0.00128657 Jy ! Component: 800 - total flux cleaned = -0.001351 Jy ! Component: 850 - total flux cleaned = -0.0014144 Jy ! Component: 900 - total flux cleaned = -0.0014895 Jy ! Component: 950 - total flux cleaned = -0.00152676 Jy ! Component: 1000 - total flux cleaned = -0.00161214 Jy ! Component: 1050 - total flux cleaned = -0.00163636 Jy ! Component: 1100 - total flux cleaned = -0.00172015 Jy ! Component: 1150 - total flux cleaned = -0.00176744 Jy ! Component: 1200 - total flux cleaned = -0.00183753 Jy ! Component: 1250 - total flux cleaned = -0.00189523 Jy ! Component: 1300 - total flux cleaned = -0.00189522 Jy ! Component: 1350 - total flux cleaned = -0.00198617 Jy ! Component: 1400 - total flux cleaned = -0.0020197 Jy ! Component: 1450 - total flux cleaned = -0.00205313 Jy ! Component: 1500 - total flux cleaned = -0.00210839 Jy ! Component: 1550 - total flux cleaned = -0.00214114 Jy ! Component: 1600 - total flux cleaned = -0.002217 Jy ! Component: 1650 - total flux cleaned = -0.00220627 Jy ! Component: 1700 - total flux cleaned = -0.0022809 Jy ! Component: 1750 - total flux cleaned = -0.00232318 Jy ! Component: 1800 - total flux cleaned = -0.00234407 Jy ! Component: 1850 - total flux cleaned = -0.00238569 Jy ! Component: 1900 - total flux cleaned = -0.00239593 Jy ! Component: 1950 - total flux cleaned = -0.00244728 Jy ! Component: 2000 - total flux cleaned = -0.00248808 Jy ! Component: 2050 - total flux cleaned = -0.00249809 Jy ! Component: 2100 - total flux cleaned = -0.00252816 Jy ! Component: 2150 - total flux cleaned = -0.0025481 Jy ! Component: 2200 - total flux cleaned = -0.00254808 Jy ! Component: 2250 - total flux cleaned = -0.00254809 Jy ! Component: 2300 - total flux cleaned = -0.00256773 Jy ! Component: 2350 - total flux cleaned = -0.00257748 Jy ! Component: 2400 - total flux cleaned = -0.00261605 Jy ! Component: 2450 - total flux cleaned = -0.00259681 Jy ! Component: 2500 - total flux cleaned = -0.00261587 Jy ! Component: 2550 - total flux cleaned = -0.00267274 Jy ! Component: 2600 - total flux cleaned = -0.00266322 Jy ! Component: 2650 - total flux cleaned = -0.00272865 Jy ! Component: 2700 - total flux cleaned = -0.00270063 Jy ! Component: 2750 - total flux cleaned = -0.00272843 Jy ! Component: 2800 - total flux cleaned = -0.0027285 Jy ! Component: 2850 - total flux cleaned = -0.00282004 Jy ! Component: 2900 - total flux cleaned = -0.00282912 Jy ! Component: 2950 - total flux cleaned = -0.00283815 Jy ! Component: 3000 - total flux cleaned = -0.00287423 Jy ! Component: 3050 - total flux cleaned = -0.00287427 Jy ! Component: 3100 - total flux cleaned = -0.00291869 Jy ! Component: 3150 - total flux cleaned = -0.00295404 Jy ! Component: 3200 - total flux cleaned = -0.00292759 Jy ! Component: 3250 - total flux cleaned = -0.00296259 Jy ! Component: 3300 - total flux cleaned = -0.00294514 Jy ! Component: 3350 - total flux cleaned = -0.00297987 Jy ! Component: 3400 - total flux cleaned = -0.0029799 Jy ! Component: 3450 - total flux cleaned = -0.00297983 Jy ! Component: 3500 - total flux cleaned = -0.00301399 Jy ! Component: 3550 - total flux cleaned = -0.00297994 Jy ! Component: 3600 - total flux cleaned = -0.00300525 Jy ! Component: 3650 - total flux cleaned = -0.00302208 Jy ! Component: 3700 - total flux cleaned = -0.00300536 Jy ! Component: 3750 - total flux cleaned = -0.00303042 Jy ! Component: 3800 - total flux cleaned = -0.00303046 Jy ! Component: 3850 - total flux cleaned = -0.00303053 Jy ! Component: 3900 - total flux cleaned = -0.00305509 Jy ! Component: 3950 - total flux cleaned = -0.00302237 Jy ! Component: 4000 - total flux cleaned = -0.00302244 Jy ! Component: 4050 - total flux cleaned = -0.00303863 Jy ! Total flux subtracted in 4096 components = -0.00303057 Jy ! Clean residual min=-0.000481 max=0.000452 Jy/beam ! Clean residual mean=0.000000 rms=0.000143 Jy/beam ! Combined flux in latest and established models = 0.411931 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 537 components and 0.411931 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J0016-0015_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8358 x 2.131 at -6.245 degrees (North through East) ! Clean map min=-0.00084278 max=0.29652 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J0016-0015_X_map.fits wmodel /vlbi/bp222/temp_maps//J0016-0015_X_map.mod ! Writing 537 model components to file: /vlbi/bp222/temp_maps//J0016-0015_X_map.mod wobs /vlbi/bp222/temp_maps//J0016-0015_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J0016-0015_X_uvs.fits wwins /vlbi/bp222/temp_maps//J0016-0015_X_map.win ! wwins: Wrote 9 windows to /vlbi/bp222/temp_maps//J0016-0015_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.296522 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000143002 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.14468 0.14468 0.289359 0.578718 1.15744 2.31487 4.62975 9.25949 18.519 37.038 74.0759 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.296 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2073.55 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J0016-0015_X_dfm.log closed on Thu Feb 14 22:22:19 2019