! Started logfile: /vlbi/bp222/maps//J0006-0623_X_dfm.log on Mon Jan 14 16:09:29 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J0006-0623_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/maps//J0006-0623_X_uvm.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! AN table 2: 16 integrations on 21 of 21 possible baselines. ! AN table 3: 32 integrations on 36 of 36 possible baselines. ! Apparent sampling: 1.1261 visibilities/baseline/integration-bin. ! Found source: J0006-0623 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 49296 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0006-0623_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 67 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=3.317218Jy sigma=33.563822 ! Fit after self-cal, rms=2.174304Jy sigma=21.977798 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6692 mas, bmaj=1.782 mas, bpa=0.6459 degrees ! Estimated noise=0.669536 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.31003 Jy ! Component: 100 - total flux cleaned = 2.89614 Jy ! Total flux subtracted in 100 components = 2.89614 Jy ! Clean residual min=-0.108453 max=0.258486 Jy/beam ! Clean residual mean=-0.000258 rms=0.021992 Jy/beam ! Combined flux in latest and established models = 2.89614 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.89614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.556703Jy sigma=5.697139 ! Fit after self-cal, rms=0.556703Jy sigma=5.697029 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.286918 Jy ! Component: 100 - total flux cleaned = 0.436917 Jy ! Total flux subtracted in 100 components = 0.436917 Jy ! Clean residual min=-0.065988 max=0.071005 Jy/beam ! Clean residual mean=-0.000094 rms=0.011983 Jy/beam ! Combined flux in latest and established models = 3.33305 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 13 components and 3.33305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.354290Jy sigma=3.826960 ! Fit after self-cal, rms=0.354276Jy sigma=3.826571 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0814073 Jy ! Component: 100 - total flux cleaned = 0.129181 Jy ! Total flux subtracted in 100 components = 0.129181 Jy ! Clean residual min=-0.058915 max=0.063945 Jy/beam ! Clean residual mean=-0.000045 rms=0.010528 Jy/beam ! Combined flux in latest and established models = 3.46223 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 17 components and 3.46223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.333495Jy sigma=3.683129 ! Fit after self-cal, rms=0.333346Jy sigma=3.682359 ! Inverting map ! Added new window around map position (-4, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0689661 Jy ! Component: 100 - total flux cleaned = 0.109029 Jy ! Total flux subtracted in 100 components = 0.109029 Jy ! Clean residual min=-0.052590 max=0.051629 Jy/beam ! Clean residual mean=-0.000015 rms=0.009397 Jy/beam ! Combined flux in latest and established models = 3.57126 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 3.57126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.310229Jy sigma=3.462837 ! Fit after self-cal, rms=0.307317Jy sigma=3.445511 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8597 mas, bmaj=2.065 mas, bpa=-0.9968 degrees ! Estimated noise=0.395861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0582971 Jy ! Component: 100 - total flux cleaned = 0.0856334 Jy ! Component: 150 - total flux cleaned = 0.0943405 Jy ! Component: 200 - total flux cleaned = 0.101912 Jy ! Total flux subtracted in 200 components = 0.101912 Jy ! Clean residual min=-0.043210 max=0.068412 Jy/beam ! Clean residual mean=-0.000013 rms=0.013028 Jy/beam ! Combined flux in latest and established models = 3.67318 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 3.67318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.296883Jy sigma=3.330643 ! Fit after self-cal, rms=0.294994Jy sigma=3.314624 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8597 x 2.065 at -0.9968 degrees (North through East) ! Clean map min=-0.041291 max=3.054 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.97 KP 0.98 ! LA 0.99 MK 1.02 NL 0.98 OV 0.98 ! PT 0.99 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.06 KP 0.99 LA 0.97 ! MK 1.02 OV 0.96 PT 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.02 HN 1.05 LA 0.96 ! MK 1.04 NL 1.28 OV 1.06 PT 1.00 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.97 KP 1.02 ! LA 0.99 MK 1.01 NL 0.97 OV 0.98 ! PT 0.98 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.07 KP 0.98 LA 0.97 ! MK 1.01 OV 0.95 PT 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.02 HN 1.02 LA 0.95 ! MK 1.05 NL 1.24 OV 1.05 PT 0.98 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.98 KP 1.02 ! LA 0.99 MK 1.02 NL 0.98 OV 0.97 ! PT 0.99 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.08 KP 1.00 LA 0.97 ! MK 1.01 OV 0.94 PT 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 HN 1.01 LA 0.96 ! MK 1.04 NL 1.25 OV 1.05 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.97 KP 1.00 ! LA 0.99 MK 1.00 NL 0.97 OV 0.98 ! PT 0.98 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.08 KP 1.00 LA 0.96 ! MK 1.02 OV 0.95 PT 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 HN 1.01 LA 0.99 ! MK 1.05 NL 1.28 OV 1.03 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.95 KP 1.03 ! LA 0.99 MK 1.02 NL 0.98 OV 0.98 ! PT 0.98 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.07 KP 0.99 LA 0.97 ! MK 1.00 OV 0.95 PT 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.01 HN 1.02 LA 0.96 ! MK 1.03 NL 1.28 OV 1.01 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.96 KP 1.02 ! LA 0.99 MK 1.01 NL 0.98 OV 0.98 ! PT 0.97 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.07 KP 0.99 LA 0.97 ! MK 1.02 OV 0.93 PT 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 HN 1.02 LA 0.95 ! MK 1.02 NL 1.25 OV 1.04 PT 1.02 ! SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 0.97 KP 1.02 ! LA 0.99 MK 1.01 NL 0.98 OV 0.99 ! PT 0.97 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.07 KP 0.99 LA 0.97 ! MK 1.02 OV 0.95 PT 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 1.01 LA 0.95 ! MK 1.04 NL 1.39 OV 1.02 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.98 KP 1.01 ! LA 0.98 MK 1.02 NL 0.99 OV 0.98 ! PT 0.98 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.07 KP 0.99 LA 0.97 ! MK 1.02 OV 0.95 PT 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.97 HN 0.99 LA 0.97 ! MK 1.02 NL 1.31 OV 1.02 PT 1.01 ! SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.97 KP 1.00 ! LA 0.98 MK 1.00 NL 0.99 OV 0.98 ! PT 0.98 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.07 KP 0.98 LA 0.97 ! MK 1.03 OV 0.94 PT 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.01 HN 1.01 LA 0.95 ! MK 1.04 NL 1.31 OV 1.03 PT 1.01 ! SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.97 KP 1.03 ! LA 0.99 MK 1.01 NL 0.99 OV 0.98 ! PT 0.99 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.05 KP 1.00 LA 0.97 ! MK 1.02 OV 0.94 PT 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 HN 1.02 LA 0.95 ! MK 1.03 NL 1.27 OV 1.03 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.96 KP 1.01 ! LA 1.00 MK 1.00 NL 0.98 OV 0.97 ! PT 0.97 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.05 KP 0.99 LA 0.97 ! MK 1.02 OV 0.96 PT 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 HN 0.99 LA 0.98 ! MK 1.03 NL 1.25 OV 1.02 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.94 KP 1.01 ! LA 0.99 MK 1.00 NL 0.97 OV 0.97 ! PT 0.97 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.05 KP 0.99 LA 0.96 ! MK 1.02 OV 0.95 PT 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00 HN 1.02 LA 0.94 ! MK 1.00 NL 1.28 OV 1.03 PT 0.98 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.294994Jy sigma=3.314624 ! Fit after self-cal, rms=0.251294Jy sigma=2.289414 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8616 mas, bmaj=2.071 mas, bpa=-0.9783 degrees ! Estimated noise=0.397075 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189667 Jy ! Component: 100 - total flux cleaned = 0.0156526 Jy ! Component: 150 - total flux cleaned = 0.015069 Jy ! Component: 200 - total flux cleaned = 0.0155487 Jy ! Total flux subtracted in 200 components = 0.0155487 Jy ! Clean residual min=-0.038396 max=0.043682 Jy/beam ! Clean residual mean=-0.000004 rms=0.008988 Jy/beam ! Combined flux in latest and established models = 3.68872 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 3.68872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.247483Jy sigma=2.257842 ! Fit after self-cal, rms=0.247276Jy sigma=2.255621 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.247276Jy sigma=2.255621 ! Fit after self-cal, rms=0.114868Jy sigma=1.047589 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8627 mas, bmaj=2.068 mas, bpa=-0.9174 degrees ! Estimated noise=0.396058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00807338 Jy ! Component: 100 - total flux cleaned = 0.00886349 Jy ! Component: 150 - total flux cleaned = 0.0101267 Jy ! Component: 200 - total flux cleaned = 0.011518 Jy ! Total flux subtracted in 200 components = 0.011518 Jy ! Clean residual min=-0.021686 max=0.031291 Jy/beam ! Clean residual mean=-0.000064 rms=0.004668 Jy/beam ! Combined flux in latest and established models = 3.70024 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 65 components and 3.70024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112354Jy sigma=1.022827 ! Fit after self-cal, rms=0.112179Jy sigma=1.020589 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.4, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295497 Jy ! Component: 100 - total flux cleaned = 0.0442544 Jy ! Component: 150 - total flux cleaned = 0.0490883 Jy ! Component: 200 - total flux cleaned = 0.0509405 Jy ! Total flux subtracted in 200 components = 0.0509405 Jy ! Clean residual min=-0.019295 max=0.021031 Jy/beam ! Clean residual mean=-0.000043 rms=0.003820 Jy/beam ! Combined flux in latest and established models = 3.75118 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 3.75118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102776Jy sigma=0.935716 ! Fit after self-cal, rms=0.101673Jy sigma=0.929954 ! Inverting map ! Added new window around map position (-2.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231457 Jy ! Component: 100 - total flux cleaned = 0.0337272 Jy ! Component: 150 - total flux cleaned = 0.0333854 Jy ! Component: 200 - total flux cleaned = 0.0330515 Jy ! Total flux subtracted in 200 components = 0.0330515 Jy ! Clean residual min=-0.016385 max=0.016543 Jy/beam ! Clean residual mean=-0.000021 rms=0.003196 Jy/beam ! Combined flux in latest and established models = 3.78424 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 105 components and 3.78424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094912Jy sigma=0.871684 ! Fit after self-cal, rms=0.093581Jy sigma=0.865164 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093581Jy sigma=0.865164 ! Fit after self-cal, rms=0.090450Jy sigma=0.837172 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8618 mas, bmaj=2.067 mas, bpa=-0.9613 degrees ! Estimated noise=0.395954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153918 Jy ! Component: 100 - total flux cleaned = 0.0223647 Jy ! Component: 150 - total flux cleaned = 0.0244803 Jy ! Component: 200 - total flux cleaned = 0.0248059 Jy ! Total flux subtracted in 200 components = 0.0248059 Jy ! Clean residual min=-0.014150 max=0.014332 Jy/beam ! Clean residual mean=-0.000021 rms=0.002634 Jy/beam ! Combined flux in latest and established models = 3.80904 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 119 components and 3.80904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086403Jy sigma=0.800397 ! Fit after self-cal, rms=0.085558Jy sigma=0.796352 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, -13.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106297 Jy ! Component: 100 - total flux cleaned = 0.0120749 Jy ! Component: 150 - total flux cleaned = 0.0130302 Jy ! Component: 200 - total flux cleaned = 0.0144829 Jy ! Total flux subtracted in 200 components = 0.0144829 Jy ! Clean residual min=-0.012373 max=0.011807 Jy/beam ! Clean residual mean=-0.000017 rms=0.002400 Jy/beam ! Combined flux in latest and established models = 3.82352 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 131 components and 3.82352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082345Jy sigma=0.765629 ! Fit after self-cal, rms=0.081954Jy sigma=0.763893 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081954Jy sigma=0.763893 ! Fit after self-cal, rms=0.080979Jy sigma=0.755852 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.189 mas, bmaj=3.624 mas, bpa=2.619 degrees ! Estimated noise=0.512525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120937 Jy ! Component: 100 - total flux cleaned = 0.0135409 Jy ! Component: 150 - total flux cleaned = 0.0129926 Jy ! Component: 200 - total flux cleaned = 0.0127562 Jy ! Total flux subtracted in 200 components = 0.0127562 Jy ! Clean residual min=-0.011083 max=0.011400 Jy/beam ! Clean residual mean=-0.000036 rms=0.002882 Jy/beam ! Combined flux in latest and established models = 3.83628 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 146 components and 3.83628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079649Jy sigma=0.747862 ! Fit after self-cal, rms=0.079014Jy sigma=0.743920 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345701 Jy ! Component: 100 - total flux cleaned = 0.00324668 Jy ! Component: 150 - total flux cleaned = 0.00304421 Jy ! Component: 200 - total flux cleaned = 0.00269135 Jy ! Total flux subtracted in 200 components = 0.00269135 Jy ! Clean residual min=-0.010892 max=0.010505 Jy/beam ! Clean residual mean=-0.000033 rms=0.002675 Jy/beam ! Combined flux in latest and established models = 3.83897 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 158 components and 3.83897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078842Jy sigma=0.745256 ! Fit after self-cal, rms=0.078582Jy sigma=0.743870 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=2.066 mas, bpa=-0.9797 degrees ! Estimated noise=0.396151 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8614 x 2.066 at -0.9797 degrees (North through East) ! Clean map min=-0.018395 max=3.0535 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078582Jy sigma=0.743870 ! Fit after self-cal, rms=0.074208Jy sigma=0.669272 ! Inverting map and beam ! Estimated beam: bmin=0.8618 mas, bmaj=2.067 mas, bpa=-0.9669 degrees ! Estimated noise=0.396581 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632083 Jy ! Component: 100 - total flux cleaned = 0.00775066 Jy ! Component: 150 - total flux cleaned = 0.00849765 Jy ! Component: 200 - total flux cleaned = 0.00872365 Jy ! Total flux subtracted in 200 components = 0.00872365 Jy ! Clean residual min=-0.009797 max=0.009607 Jy/beam ! Clean residual mean=-0.000017 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 3.8477 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 176 components and 3.8477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072262Jy sigma=0.650066 ! Fit after self-cal, rms=0.072099Jy sigma=0.649289 ! Inverting map ! Added new window around map position (-5.6, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00668758 Jy ! Component: 100 - total flux cleaned = 0.00695757 Jy ! Component: 150 - total flux cleaned = 0.00652099 Jy ! Component: 200 - total flux cleaned = 0.0059299 Jy ! Total flux subtracted in 200 components = 0.0059299 Jy ! Clean residual min=-0.009268 max=0.008225 Jy/beam ! Clean residual mean=-0.000014 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 3.85363 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 190 components and 3.85363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070154Jy sigma=0.632576 ! Fit after self-cal, rms=0.069935Jy sigma=0.631107 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069935Jy sigma=0.631107 ! Fit after self-cal, rms=0.069349Jy sigma=0.627361 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6719 mas, bmaj=1.784 mas, bpa=0.6795 degrees ! Estimated noise=0.668182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.30512 Jy ! Component: 100 - total flux cleaned = 2.88683 Jy ! Component: 150 - total flux cleaned = 3.16923 Jy ! Component: 200 - total flux cleaned = 3.31772 Jy ! Total flux subtracted in 200 components = 3.31772 Jy ! Clean residual min=-0.047221 max=0.074249 Jy/beam ! Clean residual mean=-0.000148 rms=0.009394 Jy/beam ! Combined flux in latest and established models = 3.31772 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 3.31772 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8613 mas, bmaj=2.066 mas, bpa=-0.9851 degrees ! Estimated noise=0.396595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13262 Jy ! Component: 100 - total flux cleaned = 0.225679 Jy ! Component: 150 - total flux cleaned = 0.293881 Jy ! Component: 200 - total flux cleaned = 0.345298 Jy ! Total flux subtracted in 200 components = 0.345298 Jy ! Clean residual min=-0.025125 max=0.030701 Jy/beam ! Clean residual mean=-0.000140 rms=0.006362 Jy/beam ! Combined flux in latest and established models = 3.66302 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 48 components and 3.66302 Jy ! Inverting map ! Added new window around map position (-1.2, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0400879 Jy ! Component: 100 - total flux cleaned = 0.0718138 Jy ! Component: 150 - total flux cleaned = 0.0971784 Jy ! Component: 200 - total flux cleaned = 0.117572 Jy ! Total flux subtracted in 200 components = 0.117572 Jy ! Clean residual min=-0.016867 max=0.013560 Jy/beam ! Clean residual mean=-0.000064 rms=0.003005 Jy/beam ! Combined flux in latest and established models = 3.78059 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 77 components and 3.78059 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.187 mas, bmaj=3.623 mas, bpa=2.569 degrees ! Estimated noise=0.513363 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265697 Jy ! Component: 100 - total flux cleaned = 0.0424758 Jy ! Component: 150 - total flux cleaned = 0.0533223 Jy ! Component: 200 - total flux cleaned = 0.0611995 Jy ! Total flux subtracted in 200 components = 0.0611995 Jy ! Clean residual min=-0.008910 max=0.008467 Jy/beam ! Clean residual mean=-0.000054 rms=0.002181 Jy/beam ! Combined flux in latest and established models = 3.84179 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00596111 Jy ! Component: 100 - total flux cleaned = 0.00961198 Jy ! Component: 150 - total flux cleaned = 0.0109229 Jy ! Component: 200 - total flux cleaned = 0.0122206 Jy ! Total flux subtracted in 200 components = 0.0122206 Jy ! Clean residual min=-0.007974 max=0.006972 Jy/beam ! Clean residual mean=-0.000042 rms=0.001945 Jy/beam ! Combined flux in latest and established models = 3.85401 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 144 components and 3.85401 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8613 mas, bmaj=2.066 mas, bpa=-0.9851 degrees ! Estimated noise=0.396595 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000841047 Jy ! Component: 100 - total flux cleaned = -0.00253932 Jy ! Component: 150 - total flux cleaned = -0.00321557 Jy ! Component: 200 - total flux cleaned = -0.00228812 Jy ! Total flux subtracted in 200 components = -0.00228812 Jy ! Clean residual min=-0.010032 max=0.007778 Jy/beam ! Clean residual mean=-0.000020 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 3.85172 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 161 components and 3.85172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069962Jy sigma=0.647732 ! Fit after self-cal, rms=0.069337Jy sigma=0.639906 wmodel J0006-0623_X_map.mod ! Writing 161 model components to file: J0006-0623_X_map.mod wobs J0006-0623_X_uvs.fits ! Writing UV FITS file: J0006-0623_X_uvs.fits wwins J0006-0623_X_map.win ! wwins: Wrote 7 windows to J0006-0623_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00437799 Jy ! Component: 100 - total flux cleaned = -0.00811505 Jy ! Component: 150 - total flux cleaned = -0.00933859 Jy ! Component: 200 - total flux cleaned = -0.00996889 Jy ! Component: 250 - total flux cleaned = -0.0103289 Jy ! Component: 300 - total flux cleaned = -0.0103274 Jy ! Component: 350 - total flux cleaned = -0.0104373 Jy ! Component: 400 - total flux cleaned = -0.0103286 Jy ! Component: 450 - total flux cleaned = -0.0102244 Jy ! Component: 500 - total flux cleaned = -0.0102231 Jy ! Component: 550 - total flux cleaned = -0.0101279 Jy ! Component: 600 - total flux cleaned = -0.0100361 Jy ! Component: 650 - total flux cleaned = -0.00985111 Jy ! Component: 700 - total flux cleaned = -0.00967034 Jy ! Component: 750 - total flux cleaned = -0.00940643 Jy ! Component: 800 - total flux cleaned = -0.00906426 Jy ! Component: 850 - total flux cleaned = -0.00865118 Jy ! Component: 900 - total flux cleaned = -0.00849019 Jy ! Component: 950 - total flux cleaned = -0.00809545 Jy ! Component: 1000 - total flux cleaned = -0.00786456 Jy ! Component: 1050 - total flux cleaned = -0.00756278 Jy ! Component: 1100 - total flux cleaned = -0.00741385 Jy ! Component: 1150 - total flux cleaned = -0.00734005 Jy ! Component: 1200 - total flux cleaned = -0.00698446 Jy ! Component: 1250 - total flux cleaned = -0.00684662 Jy ! Component: 1300 - total flux cleaned = -0.00684823 Jy ! Component: 1350 - total flux cleaned = -0.0067814 Jy ! Component: 1400 - total flux cleaned = -0.00671597 Jy ! Component: 1450 - total flux cleaned = -0.00684292 Jy ! Component: 1500 - total flux cleaned = -0.00684073 Jy ! Component: 1550 - total flux cleaned = -0.00652984 Jy ! Component: 1600 - total flux cleaned = -0.00647075 Jy ! Component: 1650 - total flux cleaned = -0.00659173 Jy ! Component: 1700 - total flux cleaned = -0.0065923 Jy ! Component: 1750 - total flux cleaned = -0.00647596 Jy ! Component: 1800 - total flux cleaned = -0.00641953 Jy ! Component: 1850 - total flux cleaned = -0.00630897 Jy ! Component: 1900 - total flux cleaned = -0.00619802 Jy ! Component: 1950 - total flux cleaned = -0.00608872 Jy ! Component: 2000 - total flux cleaned = -0.00582106 Jy ! Component: 2050 - total flux cleaned = -0.00571441 Jy ! Component: 2100 - total flux cleaned = -0.00540258 Jy ! Component: 2150 - total flux cleaned = -0.00519779 Jy ! Component: 2200 - total flux cleaned = -0.00499626 Jy ! Component: 2250 - total flux cleaned = -0.00469707 Jy ! Component: 2300 - total flux cleaned = -0.00469689 Jy ! Component: 2350 - total flux cleaned = -0.00440509 Jy ! Component: 2400 - total flux cleaned = -0.00411876 Jy ! Component: 2450 - total flux cleaned = -0.00388259 Jy ! Component: 2500 - total flux cleaned = -0.00378929 Jy ! Component: 2550 - total flux cleaned = -0.00365109 Jy ! Component: 2600 - total flux cleaned = -0.0034243 Jy ! Component: 2650 - total flux cleaned = -0.0033795 Jy ! Component: 2700 - total flux cleaned = -0.00320199 Jy ! Component: 2750 - total flux cleaned = -0.00320141 Jy ! Component: 2800 - total flux cleaned = -0.00298519 Jy ! Component: 2850 - total flux cleaned = -0.00285828 Jy ! Component: 2900 - total flux cleaned = -0.00290137 Jy ! Component: 2950 - total flux cleaned = -0.00285947 Jy ! Component: 3000 - total flux cleaned = -0.00265329 Jy ! Component: 3050 - total flux cleaned = -0.00253115 Jy ! Component: 3100 - total flux cleaned = -0.00253145 Jy ! Component: 3150 - total flux cleaned = -0.0023737 Jy ! Component: 3200 - total flux cleaned = -0.00241314 Jy ! Component: 3250 - total flux cleaned = -0.00233576 Jy ! Component: 3300 - total flux cleaned = -0.00233625 Jy ! Component: 3350 - total flux cleaned = -0.00226071 Jy ! Component: 3400 - total flux cleaned = -0.00218534 Jy ! Component: 3450 - total flux cleaned = -0.00211092 Jy ! Component: 3500 - total flux cleaned = -0.00203683 Jy ! Component: 3550 - total flux cleaned = -0.00189179 Jy ! Component: 3600 - total flux cleaned = -0.00189227 Jy ! Component: 3650 - total flux cleaned = -0.00174999 Jy ! Component: 3700 - total flux cleaned = -0.00164494 Jy ! Component: 3750 - total flux cleaned = -0.00157589 Jy ! Component: 3800 - total flux cleaned = -0.00147317 Jy ! Component: 3850 - total flux cleaned = -0.00133806 Jy ! Component: 3900 - total flux cleaned = -0.00123731 Jy ! Component: 3950 - total flux cleaned = -0.00113793 Jy ! Component: 4000 - total flux cleaned = -0.00107208 Jy ! Component: 4050 - total flux cleaned = -0.000942371 Jy ! Total flux subtracted in 4096 components = -0.000620925 Jy ! Clean residual min=-0.001603 max=0.001606 Jy/beam ! Clean residual mean=-0.000009 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 3.8511 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 399 components and 3.8511 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J0006-0623_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8613 x 2.066 at -0.9851 degrees (North through East) ! Clean map min=-0.0050632 max=3.052 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J0006-0623_X_map.fits wmodel /vlbi/bp222/maps//J0006-0623_X_map.mod ! Writing 399 model components to file: /vlbi/bp222/maps//J0006-0623_X_map.mod wobs /vlbi/bp222/maps//J0006-0623_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J0006-0623_X_uvs.fits wwins /vlbi/bp222/maps//J0006-0623_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/maps//J0006-0623_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 3.05198 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000507354 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0498712 0.0498712 0.0997425 0.199485 0.39897 0.79794 1.59588 3.19176 6.38352 12.767 25.5341 51.0681 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 3.051 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 6015.49 quit ! Quitting program ! Log file /vlbi/bp222/maps//J0006-0623_X_dfm.log closed on Mon Jan 14 16:09:36 2019