! Started logfile: /d2/scr/pima/bp177j_uvs/J0329-4232_C_uvs.log on Thu Jun 19 04:08:09 2014
obs /d2/scr/pima/bp177j_uvs/J0329-4232_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177j_uvs/J0329-4232_C_uva.fits
! AN table 1: 3 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.8 visibilities/baseline/integration-bin.
! Found source: J0329-4232
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 192 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177j_uvs/J0329-4232_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.003152Jy  sigma=27.556343
! Fit after  self-cal, rms=0.973860Jy  sigma=26.781623
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.506 mas, bmaj=61.5 mas, bpa=-6.933 degrees
! Estimated noise=1.93774 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206516 Jy
! Component: 100  -  total flux cleaned = 0.0216457 Jy
! Total flux subtracted in 100 components = 0.0216457 Jy
! Clean residual min=-0.002209 max=0.002230 Jy/beam
! Clean residual mean=0.000001 rms=0.000901 Jy/beam
! Combined flux in latest and established models = 0.0216457 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0216457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022582Jy  sigma=0.562364
! Fit after  self-cal, rms=0.019280Jy  sigma=0.482783
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.11 mas, bmaj=58.34 mas, bpa=-7.165 degrees
! Estimated noise=1.88076 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118493 Jy
! Component: 100  -  total flux cleaned = 0.00155704 Jy
! Component: 150  -  total flux cleaned = 0.00193819 Jy
! Component: 200  -  total flux cleaned = 0.00226405 Jy
! Total flux subtracted in 200 components = 0.00226405 Jy
! Clean residual min=-0.000993 max=0.001003 Jy/beam
! Clean residual mean=0.000003 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.0239097 Jy
! Performing phase self-cal
! Adding 96 model components to the UV plane model.
! The established model now contains 104 components and 0.0239097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017997Jy  sigma=0.456886
! Fit after  self-cal, rms=0.017973Jy  sigma=0.456244
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.11 x 58.34 at -7.165 degrees (North through East)
! Clean map  min=-0.0036467  max=0.026646 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        1.15     LA        0.97     OV        0.96     
!   PT        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     KP        1.01     LA        1.00     OV        0.88     
!   PT        1.17     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     KP        0.97     LA        0.94     OV        1.04     
!   PT        1.13     
! 
! 
! Fit before self-cal, rms=0.017973Jy  sigma=0.456244
! Fit after  self-cal, rms=0.018122Jy  sigma=0.452873
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.11 mas, bmaj=58.07 mas, bpa=-7.156 degrees
! Estimated noise=1.91895 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.74759e-05 Jy
! Component: 100  -  total flux cleaned = 0.00028413 Jy
! Component: 150  -  total flux cleaned = 0.000470706 Jy
! Component: 200  -  total flux cleaned = 0.000685791 Jy
! Total flux subtracted in 200 components = 0.000685791 Jy
! Clean residual min=-0.000688 max=0.000689 Jy/beam
! Clean residual mean=0.000000 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.0245955 Jy
! Performing phase self-cal
! Adding 119 model components to the UV plane model.
! The established model now contains 218 components and 0.0245955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017805Jy  sigma=0.446821
! Fit after  self-cal, rms=0.017803Jy  sigma=0.446597
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017803Jy  sigma=0.446597
! Fit after  self-cal, rms=0.017892Jy  sigma=0.446175
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.09 mas, bmaj=58.07 mas, bpa=-7.113 degrees
! Estimated noise=1.93338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000169858 Jy
! Component: 100  -  total flux cleaned = -0.00021119 Jy
! Component: 150  -  total flux cleaned = -0.000175086 Jy
! Component: 200  -  total flux cleaned = -0.000141075 Jy
! Total flux subtracted in 200 components = -0.000141075 Jy
! Clean residual min=-0.000530 max=0.000538 Jy/beam
! Clean residual mean=0.000000 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.0244544 Jy
selfcal
! Performing phase self-cal
! Adding 111 model components to the UV plane model.
! The established model now contains 303 components and 0.0244544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017726Jy  sigma=0.442926
! Fit after  self-cal, rms=0.017723Jy  sigma=0.442839
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.39761e-05 Jy
! Component: 100  -  total flux cleaned = -1.39355e-05 Jy
! Component: 150  -  total flux cleaned = -3.96844e-05 Jy
! Component: 200  -  total flux cleaned = -1.28192e-05 Jy
! Total flux subtracted in 200 components = -1.28192e-05 Jy
! Clean residual min=-0.000401 max=0.000401 Jy/beam
! Clean residual mean=-0.000001 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.0244416 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 389 components and 0.0244416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017634Jy  sigma=0.441058
! Fit after  self-cal, rms=0.017629Jy  sigma=0.440995
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017629Jy  sigma=0.440995
! Fit after  self-cal, rms=0.017674Jy  sigma=0.440671
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.07 mas, bmaj=58.13 mas, bpa=-7.1 degrees
! Estimated noise=1.93829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.48389e-05 Jy
! Component: 100  -  total flux cleaned = 0.000180281 Jy
! Component: 150  -  total flux cleaned = 0.000179516 Jy
! Component: 200  -  total flux cleaned = 0.000223238 Jy
! Total flux subtracted in 200 components = 0.000223238 Jy
! Clean residual min=-0.000352 max=0.000348 Jy/beam
! Clean residual mean=0.000001 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0246648 Jy
selfcal
! Performing phase self-cal
! Adding 108 model components to the UV plane model.
! The established model now contains 465 components and 0.0246648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017601Jy  sigma=0.439293
! Fit after  self-cal, rms=0.017600Jy  sigma=0.439235
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117001 Jy
! Component: 100  -  total flux cleaned = -0.000196136 Jy
! Component: 150  -  total flux cleaned = -0.000233886 Jy
! Component: 200  -  total flux cleaned = -0.000306252 Jy
! Total flux subtracted in 200 components = -0.000306252 Jy
! Clean residual min=-0.000293 max=0.000294 Jy/beam
! Clean residual mean=0.000001 rms=0.000136 Jy/beam
! Combined flux in latest and established models = 0.0243586 Jy
! Performing phase self-cal
! Adding 110 model components to the UV plane model.
! The established model now contains 548 components and 0.0243586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017557Jy  sigma=0.438354
! Fit after  self-cal, rms=0.017554Jy  sigma=0.438316
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017554Jy  sigma=0.438316
! Fit after  self-cal, rms=0.017574Jy  sigma=0.438184
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.2 mas, bmaj=57.73 mas, bpa=-7.052 degrees
! Estimated noise=1.93775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.90983e-05 Jy
! Component: 100  -  total flux cleaned = 1.64568e-05 Jy
! Component: 150  -  total flux cleaned = -1.7826e-05 Jy
! Component: 200  -  total flux cleaned = -0.000117254 Jy
! Total flux subtracted in 200 components = -0.000117254 Jy
! Clean residual min=-0.000271 max=0.000269 Jy/beam
! Clean residual mean=0.000002 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.0242413 Jy
selfcal
! Performing phase self-cal
! Adding 107 model components to the UV plane model.
! The established model now contains 632 components and 0.0242413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017535Jy  sigma=0.437438
! Fit after  self-cal, rms=0.017534Jy  sigma=0.437407
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.75911e-05 Jy
! Component: 100  -  total flux cleaned = -0.000179559 Jy
! Component: 150  -  total flux cleaned = -0.000317033 Jy
! Component: 200  -  total flux cleaned = -0.000420353 Jy
! Total flux subtracted in 200 components = -0.000420353 Jy
! Clean residual min=-0.000241 max=0.000242 Jy/beam
! Clean residual mean=0.000001 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.023821 Jy
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 689 components and 0.023821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017508Jy  sigma=0.436778
! Fit after  self-cal, rms=0.017507Jy  sigma=0.436747
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=10.05 mas, bmaj=58.18 mas, bpa=-7.101 degrees
! Estimated noise=1.93785 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.05 x 58.18 at -7.101 degrees (North through East)
! Clean map  min=-0.00433  max=0.026028 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.462 mas, bmaj=61.34 mas, bpa=-6.889 degrees
! Estimated noise=1.99705 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0230453 Jy
! Component: 100  -  total flux cleaned = 0.0232463 Jy
! Component: 150  -  total flux cleaned = 0.0239924 Jy
! Component: 200  -  total flux cleaned = 0.0252292 Jy
! Total flux subtracted in 200 components = 0.0252292 Jy
! Clean residual min=-0.001729 max=0.001743 Jy/beam
! Clean residual mean=0.000017 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.0252292 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 71 model components to the UV plane model.
! The established model now contains 71 components and 0.0252292 Jy
! Inverting map and beam 
! Estimated beam: bmin=10.05 mas, bmaj=58.18 mas, bpa=-7.101 degrees
! Estimated noise=1.93785 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00010437 Jy
! Component: 100  -  total flux cleaned = 4.8572e-05 Jy
! Component: 150  -  total flux cleaned = -0.000194807 Jy
! Component: 200  -  total flux cleaned = -0.000304485 Jy
! Total flux subtracted in 200 components = -0.000304485 Jy
! Clean residual min=-0.000889 max=0.000895 Jy/beam
! Clean residual mean=-0.000001 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.0249247 Jy
! Adding 104 model components to the UV plane model.
! The established model now contains 175 components and 0.0249247 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.2 mas, bmaj=57.73 mas, bpa=-7.052 degrees
! Estimated noise=1.93775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000288437 Jy
! Component: 100  -  total flux cleaned = 5.82964e-05 Jy
! Component: 150  -  total flux cleaned = 0.00033858 Jy
! Component: 200  -  total flux cleaned = 0.000524213 Jy
! Total flux subtracted in 200 components = 0.000524213 Jy
! Clean residual min=-0.000594 max=0.000596 Jy/beam
! Clean residual mean=0.000001 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.0254489 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.08702e-05 Jy
! Component: 100  -  total flux cleaned = -2.8694e-05 Jy
! Component: 150  -  total flux cleaned = 6.84879e-05 Jy
! Component: 200  -  total flux cleaned = 0.000195096 Jy
! Total flux subtracted in 200 components = 0.000195096 Jy
! Clean residual min=-0.000520 max=0.000521 Jy/beam
! Clean residual mean=-0.000000 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.025644 Jy
! Adding 174 model components to the UV plane model.
! The established model now contains 342 components and 0.025644 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=10.05 mas, bmaj=58.18 mas, bpa=-7.101 degrees
! Estimated noise=1.93785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100237 Jy
! Component: 100  -  total flux cleaned = -2.26118e-05 Jy
! Component: 150  -  total flux cleaned = 7.26009e-05 Jy
! Component: 200  -  total flux cleaned = 0.000159837 Jy
! Total flux subtracted in 200 components = 0.000159837 Jy
! Clean residual min=-0.000355 max=0.000354 Jy/beam
! Clean residual mean=0.000001 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0258038 Jy
selfcal
! Performing phase self-cal
! Adding 106 model components to the UV plane model.
! The established model now contains 446 components and 0.0258039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017605Jy  sigma=0.438975
! Fit after  self-cal, rms=0.017605Jy  sigma=0.438879
wmodel /d2/scr/pima/bp177j_uvs/J0329-4232_C_map.mod
! Writing 446 model components to file: /d2/scr/pima/bp177j_uvs/J0329-4232_C_map.mod
wobs /d2/scr/pima/bp177j_uvs/J0329-4232_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177j_uvs/J0329-4232_C_uvs.fits
wwins /d2/scr/pima/bp177j_uvs/J0329-4232_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177j_uvs/J0329-4232_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.05 x 58.18 at -7.101 degrees (North through East)
! Clean map  min=-0.0037713  max=0.026747 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177j_uvs/J0329-4232_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0267466 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000155487 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.744 1.744 3.488 6.97599 13.952 27.904 55.8079
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.026 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  172.018 
quit
! Quitting program
! Log file /d2/scr/pima/bp177j_uvs/J0329-4232_C_uvs.log closed on Thu Jun 19 04:08:18 2014