! Started logfile: /d2/scr/pima/bp177j_uvs/J0131-1211_X_uvs.log on Thu Jun 19 03:20:21 2014
obs /d2/scr/pima/bp177j_uvs/J0131-1211_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177j_uvs/J0131-1211_X_uva.fits
! AN table 1: 3 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.5 visibilities/baseline/integration-bin.
! Found source: J0131-1211
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 336 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177j_uvs/J0131-1211_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000535Jy  sigma=36.108689
! Fit after  self-cal, rms=0.982544Jy  sigma=36.759930
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.337 mas, bmaj=9.255 mas, bpa=-8.123 degrees
! Estimated noise=1.54795 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119073 Jy
! Component: 100  -  total flux cleaned = 0.0119969 Jy
! Total flux subtracted in 100 components = 0.0119969 Jy
! Clean residual min=-0.002755 max=0.002756 Jy/beam
! Clean residual mean=0.000001 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 0.0119969 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.0119969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020295Jy  sigma=0.735034
! Fit after  self-cal, rms=0.018181Jy  sigma=0.650124
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.82 mas, bmaj=8.42 mas, bpa=-9.628 degrees
! Estimated noise=1.12554 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000719781 Jy
! Component: 100  -  total flux cleaned = -0.000899467 Jy
! Component: 150  -  total flux cleaned = -0.00126779 Jy
! Component: 200  -  total flux cleaned = -0.0025205 Jy
! Total flux subtracted in 200 components = -0.0025205 Jy
! Clean residual min=-0.001550 max=0.001548 Jy/beam
! Clean residual mean=0.000001 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.00947643 Jy
! Performing phase self-cal
! Adding 101 model components to the UV plane model.
! The established model now contains 133 components and 0.00947643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014369Jy  sigma=0.518035
! Fit after  self-cal, rms=0.013996Jy  sigma=0.500710
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.82 x 8.42 at -9.628 degrees (North through East)
! Clean map  min=-0.0054369  max=0.016797 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.13     HN        1.00*    KP        1.05     
!   LA        0.92     NL        1.10     OV        1.02     PT        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.013996Jy  sigma=0.500710
! Fit after  self-cal, rms=0.014078Jy  sigma=0.499840
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.824 mas, bmaj=8.442 mas, bpa=-9.554 degrees
! Estimated noise=1.13639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000909324 Jy
! Component: 100  -  total flux cleaned = -0.000810858 Jy
! Component: 150  -  total flux cleaned = -0.00112236 Jy
! Component: 200  -  total flux cleaned = -0.000972884 Jy
! Total flux subtracted in 200 components = -0.000972884 Jy
! Clean residual min=-0.000765 max=0.000765 Jy/beam
! Clean residual mean=0.000001 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.00850355 Jy
! Performing phase self-cal
! Adding 93 model components to the UV plane model.
! The established model now contains 226 components and 0.00850355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013293Jy  sigma=0.473889
! Fit after  self-cal, rms=0.013275Jy  sigma=0.473078
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013275Jy  sigma=0.473078
! Fit after  self-cal, rms=0.012983Jy  sigma=0.466802
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.844 mas, bmaj=8.457 mas, bpa=-9.493 degrees
! Estimated noise=1.1222 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.44478e-05 Jy
! Component: 100  -  total flux cleaned = -9.66357e-05 Jy
! Component: 150  -  total flux cleaned = -0.000195847 Jy
! Component: 200  -  total flux cleaned = -0.000286587 Jy
! Total flux subtracted in 200 components = -0.000286587 Jy
! Clean residual min=-0.000350 max=0.000351 Jy/beam
! Clean residual mean=0.000000 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.00821697 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 293 components and 0.00821696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012844Jy  sigma=0.463121
! Fit after  self-cal, rms=0.012845Jy  sigma=0.462892
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.47746e-05 Jy
! Component: 100  -  total flux cleaned = 0.000239595 Jy
! Component: 150  -  total flux cleaned = 0.000387302 Jy
! Component: 200  -  total flux cleaned = 0.000524401 Jy
! Total flux subtracted in 200 components = 0.000524401 Jy
! Clean residual min=-0.000239 max=0.000244 Jy/beam
! Clean residual mean=0.000001 rms=0.000095 Jy/beam
! Combined flux in latest and established models = 0.00874136 Jy
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 368 components and 0.00874136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012796Jy  sigma=0.461648
! Fit after  self-cal, rms=0.012793Jy  sigma=0.461607
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012793Jy  sigma=0.461607
! Fit after  self-cal, rms=0.012826Jy  sigma=0.460909
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.836 mas, bmaj=8.435 mas, bpa=-9.403 degrees
! Estimated noise=1.12686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000170824 Jy
! Component: 100  -  total flux cleaned = -3.69049e-05 Jy
! Component: 150  -  total flux cleaned = 5.08698e-05 Jy
! Component: 200  -  total flux cleaned = 0.000101842 Jy
! Total flux subtracted in 200 components = 0.000101842 Jy
! Clean residual min=-0.000205 max=0.000206 Jy/beam
! Clean residual mean=0.000000 rms=0.000083 Jy/beam
! Combined flux in latest and established models = 0.00884321 Jy
selfcal
! Performing phase self-cal
! Adding 89 model components to the UV plane model.
! The established model now contains 445 components and 0.00884321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012780Jy  sigma=0.459862
! Fit after  self-cal, rms=0.012779Jy  sigma=0.459813
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.51445e-06 Jy
! Component: 100  -  total flux cleaned = 0.000116783 Jy
! Component: 150  -  total flux cleaned = 0.000237077 Jy
! Component: 200  -  total flux cleaned = 0.000313746 Jy
! Total flux subtracted in 200 components = 0.000313746 Jy
! Clean residual min=-0.000151 max=0.000153 Jy/beam
! Clean residual mean=0.000001 rms=0.000059 Jy/beam
! Combined flux in latest and established models = 0.00915695 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 493 components and 0.00915695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012761Jy  sigma=0.459367
! Fit after  self-cal, rms=0.012760Jy  sigma=0.459355
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012760Jy  sigma=0.459355
! Fit after  self-cal, rms=0.012789Jy  sigma=0.459017
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.215 mas, bmaj=8.347 mas, bpa=-8.61 degrees
! Estimated noise=1.13857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.66899e-05 Jy
! Component: 100  -  total flux cleaned = 0.000112725 Jy
! Component: 150  -  total flux cleaned = 0.000144406 Jy
! Component: 200  -  total flux cleaned = 0.000134756 Jy
! Total flux subtracted in 200 components = 0.000134756 Jy
! Clean residual min=-0.000155 max=0.000155 Jy/beam
! Clean residual mean=0.000000 rms=0.000060 Jy/beam
! Combined flux in latest and established models = 0.00929171 Jy
selfcal
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 556 components and 0.00929171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012767Jy  sigma=0.458573
! Fit after  self-cal, rms=0.012768Jy  sigma=0.458556
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.6679e-07 Jy
! Component: 100  -  total flux cleaned = -1.5312e-05 Jy
! Component: 150  -  total flux cleaned = -2.19065e-05 Jy
! Component: 200  -  total flux cleaned = -2.86525e-05 Jy
! Total flux subtracted in 200 components = -2.86525e-05 Jy
! Clean residual min=-0.000106 max=0.000107 Jy/beam
! Clean residual mean=0.000001 rms=0.000042 Jy/beam
! Combined flux in latest and established models = 0.00926305 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 610 components and 0.00926305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012759Jy  sigma=0.458349
! Fit after  self-cal, rms=0.012759Jy  sigma=0.458343
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.833 mas, bmaj=8.418 mas, bpa=-9.299 degrees
! Estimated noise=1.12765 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.833 x 8.418 at -9.299 degrees (North through East)
! Clean map  min=-0.0037792  max=0.015866 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.36 mas, bmaj=9.228 mas, bpa=-7.97 degrees
! Estimated noise=1.55192 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127315 Jy
! Component: 100  -  total flux cleaned = 0.0126162 Jy
! Component: 150  -  total flux cleaned = 0.0130105 Jy
! Component: 200  -  total flux cleaned = 0.0138817 Jy
! Total flux subtracted in 200 components = 0.0138817 Jy
! Clean residual min=-0.002230 max=0.002252 Jy/beam
! Clean residual mean=0.000001 rms=0.000979 Jy/beam
! Combined flux in latest and established models = 0.0138818 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 72 model components to the UV plane model.
! The established model now contains 72 components and 0.0138818 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.833 mas, bmaj=8.418 mas, bpa=-9.299 degrees
! Estimated noise=1.12765 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000212829 Jy
! Component: 100  -  total flux cleaned = -0.000427578 Jy
! Component: 150  -  total flux cleaned = -0.000770794 Jy
! Component: 200  -  total flux cleaned = -0.000776454 Jy
! Total flux subtracted in 200 components = -0.000776454 Jy
! Clean residual min=-0.001115 max=0.001123 Jy/beam
! Clean residual mean=0.000000 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.0131053 Jy
! Adding 100 model components to the UV plane model.
! The established model now contains 172 components and 0.0131053 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.215 mas, bmaj=8.347 mas, bpa=-8.61 degrees
! Estimated noise=1.13857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000290136 Jy
! Component: 100  -  total flux cleaned = 0.000498524 Jy
! Component: 150  -  total flux cleaned = 0.000897776 Jy
! Component: 200  -  total flux cleaned = 0.00136262 Jy
! Total flux subtracted in 200 components = 0.00136262 Jy
! Clean residual min=-0.000615 max=0.000611 Jy/beam
! Clean residual mean=0.000000 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.0144679 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000178248 Jy
! Component: 100  -  total flux cleaned = 0.000378972 Jy
! Component: 150  -  total flux cleaned = 0.000379251 Jy
! Component: 200  -  total flux cleaned = 0.000346755 Jy
! Total flux subtracted in 200 components = 0.000346755 Jy
! Clean residual min=-0.000545 max=0.000535 Jy/beam
! Clean residual mean=-0.000000 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.0148147 Jy
! Adding 170 model components to the UV plane model.
! The established model now contains 341 components and 0.0148147 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.833 mas, bmaj=8.418 mas, bpa=-9.299 degrees
! Estimated noise=1.12765 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000254774 Jy
! Component: 100  -  total flux cleaned = -0.000327061 Jy
! Component: 150  -  total flux cleaned = -0.000406785 Jy
! Component: 200  -  total flux cleaned = -0.00041968 Jy
! Total flux subtracted in 200 components = -0.00041968 Jy
! Clean residual min=-0.000227 max=0.000225 Jy/beam
! Clean residual mean=0.000000 rms=0.000087 Jy/beam
! Combined flux in latest and established models = 0.014395 Jy
selfcal
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 417 components and 0.014395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012805Jy  sigma=0.459629
! Fit after  self-cal, rms=0.012803Jy  sigma=0.459463
wmodel /d2/scr/pima/bp177j_uvs/J0131-1211_X_map.mod
! Writing 417 model components to file: /d2/scr/pima/bp177j_uvs/J0131-1211_X_map.mod
wobs /d2/scr/pima/bp177j_uvs/J0131-1211_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177j_uvs/J0131-1211_X_uvs.fits
wwins /d2/scr/pima/bp177j_uvs/J0131-1211_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177j_uvs/J0131-1211_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.833 x 8.418 at -9.299 degrees (North through East)
! Clean map  min=-0.001838  max=0.015935 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177j_uvs/J0131-1211_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0159354 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.32936e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.37983 1.37983 2.75966 5.51932 11.0386 22.0773 44.1545 88.309
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.015 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  217.418 
quit
! Quitting program
! Log file /d2/scr/pima/bp177j_uvs/J0131-1211_X_uvs.log closed on Thu Jun 19 03:20:25 2014