! Started logfile: /d2/scr/pima/bp177j_uvs/J0050-2306_C_uvs.log on Thu Jun 19 04:02:24 2014
obs /d2/scr/pima/bp177j_uvs/J0050-2306_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177j_uvs/J0050-2306_C_uva.fits
! AN table 1: 6 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.6 visibilities/baseline/integration-bin.
! Found source: J0050-2306
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 432 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177j_uvs/J0050-2306_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999439Jy  sigma=40.460172
! Fit after  self-cal, rms=0.987809Jy  sigma=40.931254
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.529 mas, bmaj=25.73 mas, bpa=13.41 degrees
! Estimated noise=1.35891 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00895128 Jy
! Component: 100  -  total flux cleaned = 0.00989714 Jy
! Total flux subtracted in 100 components = 0.00989714 Jy
! Clean residual min=-0.001153 max=0.001148 Jy/beam
! Clean residual mean=-0.000001 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.00989714 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.00989714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016104Jy  sigma=0.537532
! Fit after  self-cal, rms=0.014549Jy  sigma=0.459301
! Inverting map 
! Added new window around map position (0.9, 2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010091 Jy
! Component: 100  -  total flux cleaned = 0.000974502 Jy
! Total flux subtracted in 100 components = 0.000974502 Jy
! Clean residual min=-0.001121 max=0.000967 Jy/beam
! Clean residual mean=-0.000009 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0108716 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 63 components and 0.0108716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013975Jy  sigma=0.447045
! Fit after  self-cal, rms=0.013949Jy  sigma=0.446129
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.582 mas, bmaj=25.93 mas, bpa=10.91 degrees
! Estimated noise=0.910376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000843023 Jy
! Component: 100  -  total flux cleaned = 0.00113507 Jy
! Component: 150  -  total flux cleaned = 0.0013019 Jy
! Component: 200  -  total flux cleaned = 0.00133476 Jy
! Total flux subtracted in 200 components = 0.00133476 Jy
! Clean residual min=-0.000684 max=0.000801 Jy/beam
! Clean residual mean=-0.000005 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.0122064 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 99 components and 0.0122064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013816Jy  sigma=0.445529
! Fit after  self-cal, rms=0.013806Jy  sigma=0.445410
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.582 x 25.93 at 10.91 degrees (North through East)
! Clean map  min=-0.0007748  max=0.011517 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.013806Jy  sigma=0.445410
! Fit after  self-cal, rms=0.013806Jy  sigma=0.445410
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.582 mas, bmaj=25.93 mas, bpa=10.91 degrees
! Estimated noise=0.910376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000179121 Jy
! Component: 100  -  total flux cleaned = 0.000204775 Jy
! Component: 150  -  total flux cleaned = 0.000232022 Jy
! Component: 200  -  total flux cleaned = 0.000262011 Jy
! Total flux subtracted in 200 components = 0.000262011 Jy
! Clean residual min=-0.000657 max=0.000758 Jy/beam
! Clean residual mean=-0.000005 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.0124684 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 126 components and 0.0124684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013782Jy  sigma=0.445372
! Fit after  self-cal, rms=0.013777Jy  sigma=0.445348
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013777Jy  sigma=0.445348
! Fit after  self-cal, rms=0.013777Jy  sigma=0.445348
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.582 mas, bmaj=25.93 mas, bpa=10.91 degrees
! Estimated noise=0.910376 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.65254e-05 Jy
! Component: 100  -  total flux cleaned = 7.71946e-05 Jy
! Component: 150  -  total flux cleaned = 8.63865e-05 Jy
! Component: 200  -  total flux cleaned = 9.45274e-05 Jy
! Total flux subtracted in 200 components = 9.45274e-05 Jy
! Clean residual min=-0.000639 max=0.000751 Jy/beam
! Clean residual mean=-0.000005 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.0125629 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 160 components and 0.0125629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013769Jy  sigma=0.445282
! Fit after  self-cal, rms=0.013767Jy  sigma=0.445275
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.55097e-05 Jy
! Component: 100  -  total flux cleaned = 2.54253e-05 Jy
! Component: 150  -  total flux cleaned = 2.89239e-05 Jy
! Component: 200  -  total flux cleaned = 3.20909e-05 Jy
! Total flux subtracted in 200 components = 3.20909e-05 Jy
! Clean residual min=-0.000625 max=0.000744 Jy/beam
! Clean residual mean=-0.000005 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.012595 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 180 components and 0.012595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013764Jy  sigma=0.445184
! Fit after  self-cal, rms=0.013763Jy  sigma=0.445181
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013763Jy  sigma=0.445181
! Fit after  self-cal, rms=0.013902Jy  sigma=0.444913
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.56 mas, bmaj=25.96 mas, bpa=10.91 degrees
! Estimated noise=0.923415 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116944 Jy
! Component: 100  -  total flux cleaned = 0.00012159 Jy
! Component: 150  -  total flux cleaned = 0.000118246 Jy
! Component: 200  -  total flux cleaned = 0.000124471 Jy
! Total flux subtracted in 200 components = 0.000124471 Jy
! Clean residual min=-0.000628 max=0.000698 Jy/beam
! Clean residual mean=-0.000004 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.0127195 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 212 components and 0.0127195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013886Jy  sigma=0.445221
! Fit after  self-cal, rms=0.013887Jy  sigma=0.445143
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.75702e-05 Jy
! Component: 100  -  total flux cleaned = 3.03321e-05 Jy
! Component: 150  -  total flux cleaned = 4.02693e-05 Jy
! Component: 200  -  total flux cleaned = 4.97029e-05 Jy
! Total flux subtracted in 200 components = 4.97029e-05 Jy
! Clean residual min=-0.000611 max=0.000683 Jy/beam
! Clean residual mean=-0.000004 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.0127692 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 244 components and 0.0127692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013883Jy  sigma=0.445185
! Fit after  self-cal, rms=0.013883Jy  sigma=0.445178
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013883Jy  sigma=0.445178
! Fit after  self-cal, rms=0.013915Jy  sigma=0.445304
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.804 mas, bmaj=25.76 mas, bpa=11.18 degrees
! Estimated noise=0.925491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.52658e-06 Jy
! Component: 100  -  total flux cleaned = -9.5697e-06 Jy
! Component: 150  -  total flux cleaned = -2.48631e-06 Jy
! Component: 200  -  total flux cleaned = 2.06052e-06 Jy
! Total flux subtracted in 200 components = 2.06052e-06 Jy
! Clean residual min=-0.000625 max=0.000653 Jy/beam
! Clean residual mean=-0.000004 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0127713 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 257 components and 0.0127713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013910Jy  sigma=0.445368
! Fit after  self-cal, rms=0.013910Jy  sigma=0.445360
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.29918e-06 Jy
! Component: 100  -  total flux cleaned = 2.30139e-06 Jy
! Component: 150  -  total flux cleaned = 2.27151e-06 Jy
! Component: 200  -  total flux cleaned = 6.42782e-06 Jy
! Total flux subtracted in 200 components = 6.42782e-06 Jy
! Clean residual min=-0.000623 max=0.000646 Jy/beam
! Clean residual mean=-0.000004 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.0127777 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 289 components and 0.0127777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013909Jy  sigma=0.445353
! Fit after  self-cal, rms=0.013909Jy  sigma=0.445346
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.559 mas, bmaj=25.96 mas, bpa=10.91 degrees
! Estimated noise=0.924995 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.559 x 25.96 at 10.91 degrees (North through East)
! Clean map  min=-0.0010056  max=0.011431 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.393 mas, bmaj=25.83 mas, bpa=13.75 degrees
! Estimated noise=1.4249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107436 Jy
! Component: 100  -  total flux cleaned = 0.0108914 Jy
! Component: 150  -  total flux cleaned = 0.0116131 Jy
! Component: 200  -  total flux cleaned = 0.0121212 Jy
! Total flux subtracted in 200 components = 0.0121212 Jy
! Clean residual min=-0.001117 max=0.001282 Jy/beam
! Clean residual mean=-0.000002 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.0121212 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 52 model components to the UV plane model.
! The established model now contains 52 components and 0.0121212 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.559 mas, bmaj=25.96 mas, bpa=10.91 degrees
! Estimated noise=0.924995 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012867 Jy
! Component: 100  -  total flux cleaned = 0.000229095 Jy
! Component: 150  -  total flux cleaned = 0.000326173 Jy
! Component: 200  -  total flux cleaned = 0.000408362 Jy
! Total flux subtracted in 200 components = 0.000408362 Jy
! Clean residual min=-0.000818 max=0.001080 Jy/beam
! Clean residual mean=-0.000002 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.0125295 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 107 components and 0.0125295 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.804 mas, bmaj=25.76 mas, bpa=11.18 degrees
! Estimated noise=0.925491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.52085e-05 Jy
! Component: 100  -  total flux cleaned = 7.57523e-05 Jy
! Component: 150  -  total flux cleaned = 8.4955e-05 Jy
! Component: 200  -  total flux cleaned = 9.33699e-05 Jy
! Total flux subtracted in 200 components = 9.33699e-05 Jy
! Clean residual min=-0.000811 max=0.000915 Jy/beam
! Clean residual mean=-0.000002 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.0126229 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.03549e-06 Jy
! Component: 100  -  total flux cleaned = 2.20511e-05 Jy
! Component: 150  -  total flux cleaned = 2.81143e-05 Jy
! Component: 200  -  total flux cleaned = 3.35979e-05 Jy
! Total flux subtracted in 200 components = 3.35979e-05 Jy
! Clean residual min=-0.000807 max=0.000808 Jy/beam
! Clean residual mean=-0.000002 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.0126565 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 157 components and 0.0126565 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.559 mas, bmaj=25.96 mas, bpa=10.91 degrees
! Estimated noise=0.924995 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.14902e-06 Jy
! Component: 100  -  total flux cleaned = -5.35242e-06 Jy
! Component: 150  -  total flux cleaned = -9.77182e-06 Jy
! Component: 200  -  total flux cleaned = -1.393e-05 Jy
! Total flux subtracted in 200 components = -1.393e-05 Jy
! Clean residual min=-0.000805 max=0.000724 Jy/beam
! Clean residual mean=-0.000002 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.0126426 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 180 components and 0.0126426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013913Jy  sigma=0.445918
! Fit after  self-cal, rms=0.013917Jy  sigma=0.445550
wmodel /d2/scr/pima/bp177j_uvs/J0050-2306_C_map.mod
! Writing 180 model components to file: /d2/scr/pima/bp177j_uvs/J0050-2306_C_map.mod
wobs /d2/scr/pima/bp177j_uvs/J0050-2306_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177j_uvs/J0050-2306_C_uvs.fits
wwins /d2/scr/pima/bp177j_uvs/J0050-2306_C_map.win
! wwins: Wrote 1 windows to /d2/scr/pima/bp177j_uvs/J0050-2306_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 5.54743e-05 Jy
! Component: 100  -  total flux cleaned = -2.55708e-05 Jy
! Component: 150  -  total flux cleaned = -6.11145e-05 Jy
! Component: 200  -  total flux cleaned = -6.94044e-05 Jy
! Component: 250  -  total flux cleaned = -8.44558e-05 Jy
! Component: 300  -  total flux cleaned = -0.000147246 Jy
! Component: 350  -  total flux cleaned = -0.000206728 Jy
! Component: 400  -  total flux cleaned = -0.000275583 Jy
! Component: 450  -  total flux cleaned = -0.000353452 Jy
! Component: 500  -  total flux cleaned = -0.000404969 Jy
! Component: 550  -  total flux cleaned = -0.000448952 Jy
! Component: 600  -  total flux cleaned = -0.000486069 Jy
! Component: 650  -  total flux cleaned = -0.000511729 Jy
! Component: 700  -  total flux cleaned = -0.000536542 Jy
! Component: 750  -  total flux cleaned = -0.00052686 Jy
! Component: 800  -  total flux cleaned = -0.000555147 Jy
! Component: 850  -  total flux cleaned = -0.000582968 Jy
! Component: 900  -  total flux cleaned = -0.000605813 Jy
! Component: 950  -  total flux cleaned = -0.000637338 Jy
! Component: 1000  -  total flux cleaned = -0.000664018 Jy
! Component: 1050  -  total flux cleaned = -0.000699276 Jy
! Component: 1100  -  total flux cleaned = -0.00072983 Jy
! Component: 1150  -  total flux cleaned = -0.000751614 Jy
! Component: 1200  -  total flux cleaned = -0.000773254 Jy
! Component: 1250  -  total flux cleaned = -0.000799168 Jy
! Component: 1300  -  total flux cleaned = -0.000829241 Jy
! Component: 1350  -  total flux cleaned = -0.00084208 Jy
! Component: 1400  -  total flux cleaned = -0.000872083 Jy
! Component: 1450  -  total flux cleaned = -0.000902246 Jy
! Component: 1500  -  total flux cleaned = -0.000936977 Jy
! Component: 1550  -  total flux cleaned = -0.000972031 Jy
! Component: 1600  -  total flux cleaned = -0.00100747 Jy
! Component: 1650  -  total flux cleaned = -0.00102542 Jy
! Component: 1700  -  total flux cleaned = -0.00105718 Jy
! Component: 1750  -  total flux cleaned = -0.00108481 Jy
! Component: 1800  -  total flux cleaned = -0.00111752 Jy
! Component: 1850  -  total flux cleaned = -0.00113651 Jy
! Component: 1900  -  total flux cleaned = -0.00116053 Jy
! Component: 1950  -  total flux cleaned = -0.0011947 Jy
! Component: 2000  -  total flux cleaned = -0.00121458 Jy
! Component: 2050  -  total flux cleaned = -0.00123974 Jy
! Component: 2100  -  total flux cleaned = -0.00126013 Jy
! Component: 2150  -  total flux cleaned = -0.00128604 Jy
! Component: 2200  -  total flux cleaned = -0.00130712 Jy
! Component: 2250  -  total flux cleaned = -0.00131776 Jy
! Component: 2300  -  total flux cleaned = -0.00135021 Jy
! Component: 2350  -  total flux cleaned = -0.00136672 Jy
! Component: 2400  -  total flux cleaned = -0.00138909 Jy
! Component: 2450  -  total flux cleaned = -0.00141756 Jy
! Component: 2500  -  total flux cleaned = -0.00142909 Jy
! Component: 2550  -  total flux cleaned = -0.00141726 Jy
! Component: 2600  -  total flux cleaned = -0.00141726 Jy
! Component: 2650  -  total flux cleaned = -0.00141122 Jy
! Component: 2700  -  total flux cleaned = -0.00140503 Jy
! Component: 2750  -  total flux cleaned = -0.00139853 Jy
! Component: 2800  -  total flux cleaned = -0.00139195 Jy
! Component: 2850  -  total flux cleaned = -0.00138521 Jy
! Component: 2900  -  total flux cleaned = -0.00137833 Jy
! Component: 2950  -  total flux cleaned = -0.00137133 Jy
! Component: 3000  -  total flux cleaned = -0.0013642 Jy
! Component: 3050  -  total flux cleaned = -0.00135681 Jy
! Component: 3100  -  total flux cleaned = -0.00134924 Jy
! Component: 3150  -  total flux cleaned = -0.0013415 Jy
! Component: 3200  -  total flux cleaned = -0.0013335 Jy
! Component: 3250  -  total flux cleaned = -0.00132535 Jy
! Component: 3300  -  total flux cleaned = -0.00131698 Jy
! Component: 3350  -  total flux cleaned = -0.00130847 Jy
! Component: 3400  -  total flux cleaned = -0.00130855 Jy
! Component: 3450  -  total flux cleaned = -0.00129087 Jy
! Component: 3500  -  total flux cleaned = -0.0012909 Jy
! Component: 3550  -  total flux cleaned = -0.00127246 Jy
! Component: 3600  -  total flux cleaned = -0.00124393 Jy
! Component: 3650  -  total flux cleaned = -0.00124397 Jy
! Component: 3700  -  total flux cleaned = -0.00121424 Jy
! Component: 3750  -  total flux cleaned = -0.00118368 Jy
! Component: 3800  -  total flux cleaned = -0.00117321 Jy
! Component: 3850  -  total flux cleaned = -0.00114106 Jy
! Component: 3900  -  total flux cleaned = -0.00111906 Jy
! Component: 3950  -  total flux cleaned = -0.00109653 Jy
! Component: 4000  -  total flux cleaned = -0.00108523 Jy
! Component: 4050  -  total flux cleaned = -0.00105008 Jy
! Total flux subtracted in 4096 components = -0.00102604 Jy
! Clean residual min=-0.000644 max=0.000670 Jy/beam
! Clean residual mean=0.000004 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.0116165 Jy
keep
! Adding 259 model components to the UV plane model.
! The established model now contains 439 components and 0.0116165 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177j_uvs/J0050-2306_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.559 x 25.96 at 10.91 degrees (North through East)
! Clean map  min=-0.0028168  max=0.013003 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177j_uvs/J0050-2306_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.013003 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000268856 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -6.20295 6.20295 12.4059 24.8118 49.6236 99.2472
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.013 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  48.364 
quit
! Quitting program
! Log file /d2/scr/pima/bp177j_uvs/J0050-2306_C_uvs.log closed on Thu Jun 19 04:02:30 2014