! Started logfile: /d2/scr/pima/bp177i_uvs/J1612-1419_C_uvs.log on Tue Apr 15 00:31:59 2014
obs /d2/scr/pima/bp177i_uvs/J1612-1419_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177i_uvs/J1612-1419_C_uva.fits
! AN table 1: 6 integrations on 21 of 21 possible baselines.
! AN table 2: 3 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.705426 visibilities/baseline/integration-bin.
! Found source: J1612-1419
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 728 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177i_uvs/J1612-1419_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.007355Jy  sigma=40.367903
! Fit after  self-cal, rms=0.927967Jy  sigma=37.309609
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.438 mas, bmaj=7.642 mas, bpa=-20.26 degrees
! Estimated noise=1.04681 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0486621 Jy
! Component: 100  -  total flux cleaned = 0.0683366 Jy
! Total flux subtracted in 100 components = 0.0683366 Jy
! Clean residual min=-0.009685 max=0.010132 Jy/beam
! Clean residual mean=-0.000041 rms=0.003499 Jy/beam
! Combined flux in latest and established models = 0.0683366 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.0683366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036930Jy  sigma=1.283565
! Fit after  self-cal, rms=0.036790Jy  sigma=1.276454
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.709 mas, bmaj=8.904 mas, bpa=6.183 degrees
! Estimated noise=0.694749 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171305 Jy
! Component: 100  -  total flux cleaned = 0.0212119 Jy
! Component: 150  -  total flux cleaned = 0.0203431 Jy
! Component: 200  -  total flux cleaned = 0.0203352 Jy
! Total flux subtracted in 200 components = 0.0203352 Jy
! Clean residual min=-0.003511 max=0.003517 Jy/beam
! Clean residual mean=-0.000007 rms=0.001527 Jy/beam
! Combined flux in latest and established models = 0.0886717 Jy
! Performing phase self-cal
! Adding 104 model components to the UV plane model.
! The established model now contains 135 components and 0.0886718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024245Jy  sigma=0.730060
! Fit after  self-cal, rms=0.024185Jy  sigma=0.724891
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.709 x 8.904 at 6.183 degrees (North through East)
! Clean map  min=-0.00611  max=0.063686 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.04     KP        1.04     LA        0.98     
!   NL        1.15     OV        1.02     PT        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     KP        1.09     LA        0.95     
!   NL        1.04     OV        0.98     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.90     KP        1.13     LA        1.11     
!   NL        1.01     OV        0.99     PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.93     KP        1.06     LA        0.97     
!   NL        1.10     OV        1.11     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.024185Jy  sigma=0.724891
! Fit after  self-cal, rms=0.023904Jy  sigma=0.692602
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.724 mas, bmaj=8.967 mas, bpa=6.451 degrees
! Estimated noise=0.706705 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000191494 Jy
! Component: 100  -  total flux cleaned = -0.00137824 Jy
! Component: 150  -  total flux cleaned = -0.00219711 Jy
! Component: 200  -  total flux cleaned = -0.00283327 Jy
! Total flux subtracted in 200 components = -0.00283327 Jy
! Clean residual min=-0.001406 max=0.001407 Jy/beam
! Clean residual mean=0.000004 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.0858385 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 210 components and 0.0858385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022121Jy  sigma=0.627413
! Fit after  self-cal, rms=0.022121Jy  sigma=0.626534
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022121Jy  sigma=0.626534
! Fit after  self-cal, rms=0.021986Jy  sigma=0.601436
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.713 mas, bmaj=8.951 mas, bpa=6.277 degrees
! Estimated noise=0.718236 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164317 Jy
! Component: 100  -  total flux cleaned = 0.00180983 Jy
! Component: 150  -  total flux cleaned = 0.00242992 Jy
! Component: 200  -  total flux cleaned = 0.00291828 Jy
! Total flux subtracted in 200 components = 0.00291828 Jy
! Clean residual min=-0.000960 max=0.000966 Jy/beam
! Clean residual mean=0.000006 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.0887567 Jy
selfcal
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 288 components and 0.0887567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021212Jy  sigma=0.581497
! Fit after  self-cal, rms=0.021216Jy  sigma=0.581195
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.92616e-05 Jy
! Component: 100  -  total flux cleaned = 0.000173012 Jy
! Component: 150  -  total flux cleaned = 0.000519603 Jy
! Component: 200  -  total flux cleaned = 0.00083759 Jy
! Total flux subtracted in 200 components = 0.00083759 Jy
! Clean residual min=-0.000639 max=0.000632 Jy/beam
! Clean residual mean=0.000005 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.0895943 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 360 components and 0.0895943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020942Jy  sigma=0.574712
! Fit after  self-cal, rms=0.020951Jy  sigma=0.574546
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020951Jy  sigma=0.574546
! Fit after  self-cal, rms=0.021044Jy  sigma=0.566867
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.717 mas, bmaj=8.95 mas, bpa=6.331 degrees
! Estimated noise=0.732401 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00160018 Jy
! Component: 100  -  total flux cleaned = 0.00207381 Jy
! Component: 150  -  total flux cleaned = 0.00216046 Jy
! Component: 200  -  total flux cleaned = 0.0023189 Jy
! Total flux subtracted in 200 components = 0.0023189 Jy
! Clean residual min=-0.000638 max=0.000631 Jy/beam
! Clean residual mean=0.000005 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.0919132 Jy
selfcal
! Performing phase self-cal
! Adding 98 model components to the UV plane model.
! The established model now contains 438 components and 0.0919132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020631Jy  sigma=0.560201
! Fit after  self-cal, rms=0.020635Jy  sigma=0.560098
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.70506e-06 Jy
! Component: 100  -  total flux cleaned = 0.000235176 Jy
! Component: 150  -  total flux cleaned = 0.000498334 Jy
! Component: 200  -  total flux cleaned = 0.000782762 Jy
! Total flux subtracted in 200 components = 0.000782762 Jy
! Clean residual min=-0.000514 max=0.000517 Jy/beam
! Clean residual mean=0.000005 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.092696 Jy
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 509 components and 0.0926959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020480Jy  sigma=0.556874
! Fit after  self-cal, rms=0.020483Jy  sigma=0.556810
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020483Jy  sigma=0.556810
! Fit after  self-cal, rms=0.019967Jy  sigma=0.543085
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.111 mas, bmaj=9.411 mas, bpa=13.45 degrees
! Estimated noise=0.740883 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000389951 Jy
! Component: 100  -  total flux cleaned = 0.000745559 Jy
! Component: 150  -  total flux cleaned = 0.000954198 Jy
! Component: 200  -  total flux cleaned = 0.00114058 Jy
! Total flux subtracted in 200 components = 0.00114058 Jy
! Clean residual min=-0.000499 max=0.000502 Jy/beam
! Clean residual mean=0.000003 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.0938365 Jy
selfcal
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 582 components and 0.0938365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019763Jy  sigma=0.539599
! Fit after  self-cal, rms=0.019765Jy  sigma=0.539499
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000124208 Jy
! Component: 100  -  total flux cleaned = -0.000229567 Jy
! Component: 150  -  total flux cleaned = -0.000304824 Jy
! Component: 200  -  total flux cleaned = -0.000375162 Jy
! Total flux subtracted in 200 components = -0.000375162 Jy
! Clean residual min=-0.000389 max=0.000383 Jy/beam
! Clean residual mean=0.000003 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0934614 Jy
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 661 components and 0.0934614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019668Jy  sigma=0.537775
! Fit after  self-cal, rms=0.019669Jy  sigma=0.537721
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.747 mas, bmaj=8.984 mas, bpa=7.285 degrees
! Estimated noise=0.738867 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.747 x 8.984 at 7.285 degrees (North through East)
! Clean map  min=-0.0032464  max=0.063524 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.47 mas, bmaj=7.65 mas, bpa=-18.83 degrees
! Estimated noise=1.13391 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0525615 Jy
! Component: 100  -  total flux cleaned = 0.0729898 Jy
! Component: 150  -  total flux cleaned = 0.0807799 Jy
! Component: 200  -  total flux cleaned = 0.0853076 Jy
! Total flux subtracted in 200 components = 0.0853076 Jy
! Clean residual min=-0.005940 max=0.005917 Jy/beam
! Clean residual mean=-0.000020 rms=0.002253 Jy/beam
! Combined flux in latest and established models = 0.0853076 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 55 model components to the UV plane model.
! The established model now contains 55 components and 0.0853076 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.747 mas, bmaj=8.984 mas, bpa=7.285 degrees
! Estimated noise=0.738867 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00934725 Jy
! Component: 100  -  total flux cleaned = 0.0110758 Jy
! Component: 150  -  total flux cleaned = 0.0117287 Jy
! Component: 200  -  total flux cleaned = 0.011759 Jy
! Total flux subtracted in 200 components = 0.011759 Jy
! Clean residual min=-0.002404 max=0.002428 Jy/beam
! Clean residual mean=0.000000 rms=0.001039 Jy/beam
! Combined flux in latest and established models = 0.0970665 Jy
! Adding 95 model components to the UV plane model.
! The established model now contains 149 components and 0.0970665 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.111 mas, bmaj=9.411 mas, bpa=13.45 degrees
! Estimated noise=0.740883 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000822635 Jy
! Component: 100  -  total flux cleaned = 0.00102002 Jy
! Component: 150  -  total flux cleaned = 0.000675722 Jy
! Component: 200  -  total flux cleaned = 0.000832192 Jy
! Total flux subtracted in 200 components = 0.000832192 Jy
! Clean residual min=-0.001190 max=0.001190 Jy/beam
! Clean residual mean=0.000004 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.0978987 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.19025e-06 Jy
! Component: 100  -  total flux cleaned = 0.00017456 Jy
! Component: 150  -  total flux cleaned = 0.000493194 Jy
! Component: 200  -  total flux cleaned = 0.000933568 Jy
! Total flux subtracted in 200 components = 0.000933568 Jy
! Clean residual min=-0.000783 max=0.000787 Jy/beam
! Clean residual mean=0.000007 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.0988323 Jy
! Adding 159 model components to the UV plane model.
! The established model now contains 302 components and 0.0988322 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.747 mas, bmaj=8.984 mas, bpa=7.285 degrees
! Estimated noise=0.738867 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000216189 Jy
! Component: 100  -  total flux cleaned = -0.000175483 Jy
! Component: 150  -  total flux cleaned = -0.000136444 Jy
! Component: 200  -  total flux cleaned = 8.25114e-05 Jy
! Total flux subtracted in 200 components = 8.25114e-05 Jy
! Clean residual min=-0.000591 max=0.000592 Jy/beam
! Clean residual mean=0.000004 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.0989147 Jy
selfcal
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 365 components and 0.0989147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019934Jy  sigma=0.546045
! Fit after  self-cal, rms=0.019940Jy  sigma=0.545484
wmodel /d2/scr/pima/bp177i_uvs/J1612-1419_C_map.mod
! Writing 365 model components to file: /d2/scr/pima/bp177i_uvs/J1612-1419_C_map.mod
wobs /d2/scr/pima/bp177i_uvs/J1612-1419_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177i_uvs/J1612-1419_C_uvs.fits
wwins /d2/scr/pima/bp177i_uvs/J1612-1419_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177i_uvs/J1612-1419_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.747 x 8.984 at 7.285 degrees (North through East)
! Clean map  min=-0.0033979  max=0.065609 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177i_uvs/J1612-1419_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0656095 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000248927 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13822 1.13822 2.27645 4.55289 9.10579 18.2116 36.4232 72.8463
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.065 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  263.568 
quit
! Quitting program
! Log file /d2/scr/pima/bp177i_uvs/J1612-1419_C_uvs.log closed on Tue Apr 15 00:32:03 2014