! Started logfile: /d2/scr/pima/bp177i_uvs/J1528+6739_X_uvs.log on Tue Apr 15 00:25:24 2014
obs /d2/scr/pima/bp177i_uvs/J1528+6739_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177i_uvs/J1528+6739_X_uva.fits
! AN table 1: 5 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.68 visibilities/baseline/integration-bin.
! Found source: J1528+6739
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1224 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177i_uvs/J1528+6739_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004853Jy  sigma=38.301734
! Fit after  self-cal, rms=0.935521Jy  sigma=35.634322
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7495 mas, bmaj=3.189 mas, bpa=46.62 degrees
! Estimated noise=0.758505 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0491318 Jy
! Component: 100  -  total flux cleaned = 0.0607298 Jy
! Total flux subtracted in 100 components = 0.0607298 Jy
! Clean residual min=-0.004586 max=0.005972 Jy/beam
! Clean residual mean=0.000022 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.0607298 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0607298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024939Jy  sigma=0.823011
! Fit after  self-cal, rms=0.024452Jy  sigma=0.818549
! Inverting map 
! Added new window around map position (0.2, -10.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00635578 Jy
! Component: 100  -  total flux cleaned = 0.0105197 Jy
! Total flux subtracted in 100 components = 0.0105197 Jy
! Clean residual min=-0.003814 max=0.005013 Jy/beam
! Clean residual mean=0.000014 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.0712495 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.0712495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022331Jy  sigma=0.728074
! Fit after  self-cal, rms=0.022245Jy  sigma=0.723838
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8948 mas, bmaj=3.073 mas, bpa=46.67 degrees
! Estimated noise=0.554181 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, 9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00480969 Jy
! Component: 100  -  total flux cleaned = 0.00793597 Jy
! Component: 150  -  total flux cleaned = 0.0102204 Jy
! Component: 200  -  total flux cleaned = 0.011784 Jy
! Total flux subtracted in 200 components = 0.011784 Jy
! Clean residual min=-0.002594 max=0.002100 Jy/beam
! Clean residual mean=0.000019 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.0830335 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 47 components and 0.0830335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020870Jy  sigma=0.666527
! Fit after  self-cal, rms=0.020846Jy  sigma=0.665770
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8948 x 3.073 at 46.67 degrees (North through East)
! Clean map  min=-0.0023698  max=0.061496 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.17     HN        0.92     KP        0.92     
!   LA        1.06     MK        1.06     NL        1.10     OV        0.91     
!   PT        0.84     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.97     HN        0.90     KP        0.92     
!   LA        0.94     MK        1.05     NL        1.12     OV        0.93     
!   PT        0.87     SC        0.94     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.02     HN        1.01     KP        1.06     
!   LA        0.90     MK        1.04     NL        1.18     OV        0.98     
!   PT        0.89     SC        0.95     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        0.94     KP        0.97     
!   LA        1.02     MK        1.10     NL        1.09     OV        0.97     
!   PT        0.88     SC        1.06     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.95     KP        1.04     
!   LA        1.01     MK        0.98     NL        1.15     OV        0.96     
!   PT        0.84     SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.11     KP        1.02     
!   LA        1.06     MK        0.99     NL        1.11     OV        1.02     
!   PT        0.90     SC        1.09     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.96     KP        1.01     
!   LA        0.96     MK        1.10     NL        1.08     OV        1.01     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.020846Jy  sigma=0.665770
! Fit after  self-cal, rms=0.019297Jy  sigma=0.618653
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9165 mas, bmaj=3.063 mas, bpa=46.29 degrees
! Estimated noise=0.549388 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000963598 Jy
! Component: 100  -  total flux cleaned = -0.00127834 Jy
! Component: 150  -  total flux cleaned = -0.00134734 Jy
! Component: 200  -  total flux cleaned = -0.00140875 Jy
! Total flux subtracted in 200 components = -0.00140875 Jy
! Clean residual min=-0.001266 max=0.001368 Jy/beam
! Clean residual mean=-0.000000 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.0816248 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 66 components and 0.0816248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019170Jy  sigma=0.612469
! Fit after  self-cal, rms=0.019169Jy  sigma=0.612323
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019169Jy  sigma=0.612323
! Fit after  self-cal, rms=0.019148Jy  sigma=0.612160
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9168 mas, bmaj=3.061 mas, bpa=46.29 degrees
! Estimated noise=0.548306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000305593 Jy
! Component: 100  -  total flux cleaned = -0.000332717 Jy
! Component: 150  -  total flux cleaned = -0.000332474 Jy
! Component: 200  -  total flux cleaned = -0.000309063 Jy
! Total flux subtracted in 200 components = -0.000309063 Jy
! Clean residual min=-0.001218 max=0.001304 Jy/beam
! Clean residual mean=0.000001 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.0813157 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 76 components and 0.0813157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019083Jy  sigma=0.609563
! Fit after  self-cal, rms=0.019082Jy  sigma=0.609535
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.58278e-05 Jy
! Component: 100  -  total flux cleaned = -4.58833e-05 Jy
! Component: 150  -  total flux cleaned = -4.5584e-05 Jy
! Component: 200  -  total flux cleaned = -2.67683e-05 Jy
! Total flux subtracted in 200 components = -2.67683e-05 Jy
! Clean residual min=-0.001198 max=0.001237 Jy/beam
! Clean residual mean=0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.0812889 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 87 components and 0.0812889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019041Jy  sigma=0.608121
! Fit after  self-cal, rms=0.019040Jy  sigma=0.608106
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019040Jy  sigma=0.608106
! Fit after  self-cal, rms=0.018987Jy  sigma=0.607747
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9167 mas, bmaj=3.057 mas, bpa=46.29 degrees
! Estimated noise=0.545837 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108465 Jy
! Component: 100  -  total flux cleaned = -6.85151e-05 Jy
! Component: 150  -  total flux cleaned = -3.13502e-05 Jy
! Component: 200  -  total flux cleaned = -3.20894e-05 Jy
! Total flux subtracted in 200 components = -3.20894e-05 Jy
! Clean residual min=-0.001160 max=0.001197 Jy/beam
! Clean residual mean=0.000002 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.0812569 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 97 components and 0.0812568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018942Jy  sigma=0.606602
! Fit after  self-cal, rms=0.018942Jy  sigma=0.606590
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.70821e-05 Jy
! Component: 100  -  total flux cleaned = -1.72637e-05 Jy
! Component: 150  -  total flux cleaned = -1.72908e-05 Jy
! Component: 200  -  total flux cleaned = -1.76251e-05 Jy
! Total flux subtracted in 200 components = -1.76251e-05 Jy
! Clean residual min=-0.001145 max=0.001167 Jy/beam
! Clean residual mean=0.000002 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.0812392 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 106 components and 0.0812392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018918Jy  sigma=0.605842
! Fit after  self-cal, rms=0.018918Jy  sigma=0.605834
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018918Jy  sigma=0.605834
! Fit after  self-cal, rms=0.018861Jy  sigma=0.605438
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2 mas, bmaj=3.286 mas, bpa=48.08 degrees
! Estimated noise=0.662709 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.05465e-05 Jy
! Component: 100  -  total flux cleaned = 0.000123477 Jy
! Component: 150  -  total flux cleaned = 0.000218355 Jy
! Component: 200  -  total flux cleaned = 0.000286466 Jy
! Total flux subtracted in 200 components = 0.000286466 Jy
! Clean residual min=-0.001159 max=0.001355 Jy/beam
! Clean residual mean=0.000005 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.0815257 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 122 components and 0.0815257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018843Jy  sigma=0.604957
! Fit after  self-cal, rms=0.018841Jy  sigma=0.604911
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.43383e-05 Jy
! Component: 100  -  total flux cleaned = -2.37674e-05 Jy
! Component: 150  -  total flux cleaned = -2.36658e-05 Jy
! Component: 200  -  total flux cleaned = -1.34219e-05 Jy
! Total flux subtracted in 200 components = -1.34219e-05 Jy
! Clean residual min=-0.001165 max=0.001309 Jy/beam
! Clean residual mean=0.000005 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.0815123 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 135 components and 0.0815123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018832Jy  sigma=0.604644
! Fit after  self-cal, rms=0.018830Jy  sigma=0.604618
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9165 mas, bmaj=3.054 mas, bpa=46.3 degrees
! Estimated noise=0.543117 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9165 x 3.054 at 46.3 degrees (North through East)
! Clean map  min=-0.0017658  max=0.060477 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7512 mas, bmaj=3.163 mas, bpa=46.53 degrees
! Estimated noise=0.756223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0485167 Jy
! Component: 100  -  total flux cleaned = 0.0598979 Jy
! Component: 150  -  total flux cleaned = 0.0654458 Jy
! Component: 200  -  total flux cleaned = 0.06917 Jy
! Total flux subtracted in 200 components = 0.06917 Jy
! Clean residual min=-0.002599 max=0.002444 Jy/beam
! Clean residual mean=0.000010 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.06917 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.06917 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9165 mas, bmaj=3.054 mas, bpa=46.3 degrees
! Estimated noise=0.543117 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00348531 Jy
! Component: 100  -  total flux cleaned = 0.00581661 Jy
! Component: 150  -  total flux cleaned = 0.00744293 Jy
! Component: 200  -  total flux cleaned = 0.0085869 Jy
! Total flux subtracted in 200 components = 0.0085869 Jy
! Clean residual min=-0.001548 max=0.001529 Jy/beam
! Clean residual mean=0.000011 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.0777569 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 50 components and 0.0777569 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2 mas, bmaj=3.286 mas, bpa=48.08 degrees
! Estimated noise=0.662709 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183185 Jy
! Component: 100  -  total flux cleaned = 0.00286428 Jy
! Component: 150  -  total flux cleaned = 0.00315949 Jy
! Component: 200  -  total flux cleaned = 0.00338248 Jy
! Total flux subtracted in 200 components = 0.00338248 Jy
! Clean residual min=-0.001418 max=0.001597 Jy/beam
! Clean residual mean=0.000008 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.0811393 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000198313 Jy
! Component: 100  -  total flux cleaned = 0.000376262 Jy
! Component: 150  -  total flux cleaned = 0.000564205 Jy
! Component: 200  -  total flux cleaned = 0.000686758 Jy
! Total flux subtracted in 200 components = 0.000686758 Jy
! Clean residual min=-0.001302 max=0.001503 Jy/beam
! Clean residual mean=0.000004 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.0818261 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 103 components and 0.0818261 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9165 mas, bmaj=3.054 mas, bpa=46.3 degrees
! Estimated noise=0.543117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00046872 Jy
! Component: 100  -  total flux cleaned = -0.000472204 Jy
! Component: 150  -  total flux cleaned = -0.000447573 Jy
! Component: 200  -  total flux cleaned = -0.000377852 Jy
! Total flux subtracted in 200 components = -0.000377852 Jy
! Clean residual min=-0.001133 max=0.001199 Jy/beam
! Clean residual mean=0.000003 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.0814482 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 127 components and 0.0814482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018889Jy  sigma=0.607401
! Fit after  self-cal, rms=0.018882Jy  sigma=0.607239
wmodel /d2/scr/pima/bp177i_uvs/J1528+6739_X_map.mod
! Writing 127 model components to file: /d2/scr/pima/bp177i_uvs/J1528+6739_X_map.mod
wobs /d2/scr/pima/bp177i_uvs/J1528+6739_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177i_uvs/J1528+6739_X_uvs.fits
wwins /d2/scr/pima/bp177i_uvs/J1528+6739_X_map.win
! wwins: Wrote 4 windows to /d2/scr/pima/bp177i_uvs/J1528+6739_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115584 Jy
! Component: 100  -  total flux cleaned = 1.836e-05 Jy
! Component: 150  -  total flux cleaned = -1.59327e-07 Jy
! Component: 200  -  total flux cleaned = -5.11799e-05 Jy
! Component: 250  -  total flux cleaned = -6.70732e-05 Jy
! Component: 300  -  total flux cleaned = -6.77161e-05 Jy
! Component: 350  -  total flux cleaned = -0.000113946 Jy
! Component: 400  -  total flux cleaned = -0.000128471 Jy
! Component: 450  -  total flux cleaned = -0.00018589 Jy
! Component: 500  -  total flux cleaned = -0.000227854 Jy
! Component: 550  -  total flux cleaned = -0.00028247 Jy
! Component: 600  -  total flux cleaned = -0.000348588 Jy
! Component: 650  -  total flux cleaned = -0.000374087 Jy
! Component: 700  -  total flux cleaned = -0.000436983 Jy
! Component: 750  -  total flux cleaned = -0.000449396 Jy
! Component: 800  -  total flux cleaned = -0.000510028 Jy
! Component: 850  -  total flux cleaned = -0.000569426 Jy
! Component: 900  -  total flux cleaned = -0.000569605 Jy
! Component: 950  -  total flux cleaned = -0.00058122 Jy
! Component: 1000  -  total flux cleaned = -0.000603806 Jy
! Component: 1050  -  total flux cleaned = -0.000659055 Jy
! Component: 1100  -  total flux cleaned = -0.000658787 Jy
! Component: 1150  -  total flux cleaned = -0.000626871 Jy
! Component: 1200  -  total flux cleaned = -0.000679876 Jy
! Component: 1250  -  total flux cleaned = -0.000690266 Jy
! Component: 1300  -  total flux cleaned = -0.000700469 Jy
! Component: 1350  -  total flux cleaned = -0.000720836 Jy
! Component: 1400  -  total flux cleaned = -0.000740783 Jy
! Component: 1450  -  total flux cleaned = -0.000750591 Jy
! Component: 1500  -  total flux cleaned = -0.00079912 Jy
! Component: 1550  -  total flux cleaned = -0.000798889 Jy
! Component: 1600  -  total flux cleaned = -0.000855519 Jy
! Component: 1650  -  total flux cleaned = -0.000846286 Jy
! Component: 1700  -  total flux cleaned = -0.000864786 Jy
! Component: 1750  -  total flux cleaned = -0.000883102 Jy
! Component: 1800  -  total flux cleaned = -0.000892158 Jy
! Component: 1850  -  total flux cleaned = -0.000918974 Jy
! Component: 1900  -  total flux cleaned = -0.000910176 Jy
! Component: 1950  -  total flux cleaned = -0.000936465 Jy
! Component: 2000  -  total flux cleaned = -0.00097126 Jy
! Component: 2050  -  total flux cleaned = -0.000997076 Jy
! Component: 2100  -  total flux cleaned = -0.00101407 Jy
! Component: 2150  -  total flux cleaned = -0.00102254 Jy
! Component: 2200  -  total flux cleaned = -0.00104762 Jy
! Component: 2250  -  total flux cleaned = -0.00108074 Jy
! Component: 2300  -  total flux cleaned = -0.00108069 Jy
! Component: 2350  -  total flux cleaned = -0.00109699 Jy
! Component: 2400  -  total flux cleaned = -0.00113724 Jy
! Component: 2450  -  total flux cleaned = -0.00117714 Jy
! Component: 2500  -  total flux cleaned = -0.00117711 Jy
! Component: 2550  -  total flux cleaned = -0.00122427 Jy
! Component: 2600  -  total flux cleaned = -0.00125554 Jy
! Component: 2650  -  total flux cleaned = -0.00128657 Jy
! Component: 2700  -  total flux cleaned = -0.0013174 Jy
! Component: 2750  -  total flux cleaned = -0.00135561 Jy
! Component: 2800  -  total flux cleaned = -0.00140113 Jy
! Component: 2850  -  total flux cleaned = -0.00142372 Jy
! Component: 2900  -  total flux cleaned = -0.00149855 Jy
! Component: 2950  -  total flux cleaned = -0.00154316 Jy
! Component: 3000  -  total flux cleaned = -0.00156535 Jy
! Component: 3050  -  total flux cleaned = -0.00160208 Jy
! Component: 3100  -  total flux cleaned = -0.00164579 Jy
! Component: 3150  -  total flux cleaned = -0.00166752 Jy
! Component: 3200  -  total flux cleaned = -0.00168918 Jy
! Component: 3250  -  total flux cleaned = -0.00170351 Jy
! Component: 3300  -  total flux cleaned = -0.00176055 Jy
! Component: 3350  -  total flux cleaned = -0.00178182 Jy
! Component: 3400  -  total flux cleaned = -0.00181003 Jy
! Component: 3450  -  total flux cleaned = -0.00183107 Jy
! Component: 3500  -  total flux cleaned = -0.00186597 Jy
! Component: 3550  -  total flux cleaned = -0.00189368 Jy
! Component: 3600  -  total flux cleaned = -0.00192814 Jy
! Component: 3650  -  total flux cleaned = -0.00196248 Jy
! Component: 3700  -  total flux cleaned = -0.00198298 Jy
! Component: 3750  -  total flux cleaned = -0.00199661 Jy
! Component: 3800  -  total flux cleaned = -0.00201021 Jy
! Component: 3850  -  total flux cleaned = -0.00206412 Jy
! Component: 3900  -  total flux cleaned = -0.00211103 Jy
! Component: 3950  -  total flux cleaned = -0.00215106 Jy
! Component: 4000  -  total flux cleaned = -0.00216435 Jy
! Component: 4050  -  total flux cleaned = -0.00221067 Jy
! Total flux subtracted in 4096 components = -0.00223045 Jy
! Clean residual min=-0.000395 max=0.000395 Jy/beam
! Clean residual mean=0.000001 rms=0.000116 Jy/beam
! Combined flux in latest and established models = 0.0792178 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 423 components and 0.0792178 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177i_uvs/J1528+6739_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9165 x 3.054 at 46.3 degrees (North through East)
! Clean map  min=-0.0010918  max=0.060748 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177i_uvs/J1528+6739_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0607483 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000114088 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.563416 0.563416 1.12683 2.25366 4.50733 9.01465 18.0293 36.0586 72.1172
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.06 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  532.466 
quit
! Quitting program
! Log file /d2/scr/pima/bp177i_uvs/J1528+6739_X_uvs.log closed on Tue Apr 15 00:25:29 2014