! Started logfile: /d2/scr/pima/bp177i_uvs/J1528+6739_C_uvs.log on Tue Apr 15 00:31:06 2014
obs /d2/scr/pima/bp177i_uvs/J1528+6739_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177i_uvs/J1528+6739_C_uva.fits
! AN table 1: 5 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.68 visibilities/baseline/integration-bin.
! Found source: J1528+6739
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1224 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177i_uvs/J1528+6739_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005970Jy  sigma=45.664570
! Fit after  self-cal, rms=0.920602Jy  sigma=41.888844
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.279 mas, bmaj=5.355 mas, bpa=46.28 degrees
! Estimated noise=0.679138 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0604337 Jy
! Component: 100  -  total flux cleaned = 0.0740437 Jy
! Total flux subtracted in 100 components = 0.0740437 Jy
! Clean residual min=-0.003284 max=0.004984 Jy/beam
! Clean residual mean=-0.000008 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.0740437 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0740437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024329Jy  sigma=0.838772
! Fit after  self-cal, rms=0.024312Jy  sigma=0.838235
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.568 mas, bmaj=5.392 mas, bpa=46.34 degrees
! Estimated noise=0.46577 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00589055 Jy
! Component: 100  -  total flux cleaned = 0.00871038 Jy
! Component: 150  -  total flux cleaned = 0.0103573 Jy
! Component: 200  -  total flux cleaned = 0.0109892 Jy
! Total flux subtracted in 200 components = 0.0109892 Jy
! Clean residual min=-0.002581 max=0.003236 Jy/beam
! Clean residual mean=-0.000008 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.0850329 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0850329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022654Jy  sigma=0.761694
! Fit after  self-cal, rms=0.022640Jy  sigma=0.761342
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.568 x 5.392 at 46.34 degrees (North through East)
! Clean map  min=-0.0025206  max=0.078441 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.12     HN        1.01     KP        0.95     
!   LA        1.06     MK        0.99     NL        1.05     OV        0.95     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.09     HN        1.00     KP        0.97     
!   LA        1.08     MK        1.02     NL        1.02     OV        0.94     
!   PT        0.89     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.06     HN        1.05     KP        0.96     
!   LA        1.15     MK        1.00     NL        1.04     OV        0.95     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.94     KP        0.87     
!   LA        1.04     MK        0.97     NL        1.06     OV        0.96     
!   PT        0.91     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.10     HN        1.01     KP        0.97     
!   LA        1.08     MK        0.95     NL        1.01     OV        1.02     
!   PT        0.89     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.022640Jy  sigma=0.761342
! Fit after  self-cal, rms=0.021395Jy  sigma=0.720589
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.592 mas, bmaj=5.387 mas, bpa=46.11 degrees
! Estimated noise=0.464644 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000162171 Jy
! Component: 100  -  total flux cleaned = 0.000389073 Jy
! Component: 150  -  total flux cleaned = 0.000468307 Jy
! Component: 200  -  total flux cleaned = 0.000485331 Jy
! Total flux subtracted in 200 components = 0.000485331 Jy
! Clean residual min=-0.001938 max=0.002311 Jy/beam
! Clean residual mean=-0.000004 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.0855182 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 33 components and 0.0855182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021314Jy  sigma=0.717768
! Fit after  self-cal, rms=0.021314Jy  sigma=0.717617
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021314Jy  sigma=0.717617
! Fit after  self-cal, rms=0.021334Jy  sigma=0.717323
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.591 mas, bmaj=5.39 mas, bpa=46.14 degrees
! Estimated noise=0.465961 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030681 Jy
! Component: 100  -  total flux cleaned = 0.000372119 Jy
! Component: 150  -  total flux cleaned = 0.000399429 Jy
! Component: 200  -  total flux cleaned = 0.000424732 Jy
! Total flux subtracted in 200 components = 0.000424732 Jy
! Clean residual min=-0.001921 max=0.002278 Jy/beam
! Clean residual mean=-0.000004 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.085943 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 39 components and 0.085943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021295Jy  sigma=0.716421
! Fit after  self-cal, rms=0.021294Jy  sigma=0.716382
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (57.3, 24.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180065 Jy
! Component: 100  -  total flux cleaned = 0.00192078 Jy
! Component: 150  -  total flux cleaned = 0.00195108 Jy
! Component: 200  -  total flux cleaned = 0.00203105 Jy
! Total flux subtracted in 200 components = 0.00203105 Jy
! Clean residual min=-0.001925 max=0.002131 Jy/beam
! Clean residual mean=-0.000003 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.087974 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 61 components and 0.087974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021009Jy  sigma=0.709783
! Fit after  self-cal, rms=0.021004Jy  sigma=0.709069
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021004Jy  sigma=0.709069
! Fit after  self-cal, rms=0.020674Jy  sigma=0.691643
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.592 mas, bmaj=5.392 mas, bpa=46.15 degrees
! Estimated noise=0.465381 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000150207 Jy
! Component: 100  -  total flux cleaned = 0.000211409 Jy
! Component: 150  -  total flux cleaned = 0.000282947 Jy
! Component: 200  -  total flux cleaned = 0.000348447 Jy
! Total flux subtracted in 200 components = 0.000348447 Jy
! Clean residual min=-0.001772 max=0.001543 Jy/beam
! Clean residual mean=-0.000001 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.0883224 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 81 components and 0.0883224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020627Jy  sigma=0.690506
! Fit after  self-cal, rms=0.020627Jy  sigma=0.690451
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000129502 Jy
! Component: 100  -  total flux cleaned = 0.000188741 Jy
! Component: 150  -  total flux cleaned = 0.000243433 Jy
! Component: 200  -  total flux cleaned = 0.000243302 Jy
! Total flux subtracted in 200 components = 0.000243302 Jy
! Clean residual min=-0.001768 max=0.001530 Jy/beam
! Clean residual mean=-0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.0885657 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 89 components and 0.0885657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020599Jy  sigma=0.689908
! Fit after  self-cal, rms=0.020600Jy  sigma=0.689894
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020600Jy  sigma=0.689894
! Fit after  self-cal, rms=0.020607Jy  sigma=0.689770
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.466 mas, bmaj=5.806 mas, bpa=47 degrees
! Estimated noise=0.572417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.67676e-05 Jy
! Component: 100  -  total flux cleaned = 0.00019475 Jy
! Component: 150  -  total flux cleaned = 0.000278776 Jy
! Component: 200  -  total flux cleaned = 0.000340695 Jy
! Total flux subtracted in 200 components = 0.000340695 Jy
! Clean residual min=-0.002573 max=0.002002 Jy/beam
! Clean residual mean=-0.000003 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.0889064 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 110 components and 0.0889065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020602Jy  sigma=0.689617
! Fit after  self-cal, rms=0.020601Jy  sigma=0.689558
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.01333e-05 Jy
! Component: 100  -  total flux cleaned = 0.000105596 Jy
! Component: 150  -  total flux cleaned = 0.000156076 Jy
! Component: 200  -  total flux cleaned = 0.000165261 Jy
! Total flux subtracted in 200 components = 0.000165261 Jy
! Clean residual min=-0.002566 max=0.001950 Jy/beam
! Clean residual mean=-0.000003 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.0890717 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 126 components and 0.0890717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020597Jy  sigma=0.689598
! Fit after  self-cal, rms=0.020596Jy  sigma=0.689575
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.593 mas, bmaj=5.392 mas, bpa=46.16 degrees
! Estimated noise=0.465041 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.593 x 5.392 at 46.16 degrees (North through East)
! Clean map  min=-0.0017019  max=0.078449 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.285 mas, bmaj=5.362 mas, bpa=46.36 degrees
! Estimated noise=0.675161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.060577 Jy
! Component: 100  -  total flux cleaned = 0.0742377 Jy
! Component: 150  -  total flux cleaned = 0.0797019 Jy
! Component: 200  -  total flux cleaned = 0.0823229 Jy
! Total flux subtracted in 200 components = 0.0823229 Jy
! Clean residual min=-0.002199 max=0.002469 Jy/beam
! Clean residual mean=-0.000003 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.082323 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.082323 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.593 mas, bmaj=5.392 mas, bpa=46.16 degrees
! Estimated noise=0.465041 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.9, -15.3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00240471 Jy
! Component: 100  -  total flux cleaned = 0.00369965 Jy
! Component: 150  -  total flux cleaned = 0.00453797 Jy
! Component: 200  -  total flux cleaned = 0.00508094 Jy
! Total flux subtracted in 200 components = 0.00508094 Jy
! Clean residual min=-0.001901 max=0.001818 Jy/beam
! Clean residual mean=-0.000001 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.0874039 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 50 components and 0.0874039 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.466 mas, bmaj=5.806 mas, bpa=47 degrees
! Estimated noise=0.572417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123288 Jy
! Component: 100  -  total flux cleaned = 0.00170808 Jy
! Component: 150  -  total flux cleaned = 0.00200521 Jy
! Component: 200  -  total flux cleaned = 0.00220958 Jy
! Total flux subtracted in 200 components = 0.00220958 Jy
! Clean residual min=-0.002296 max=0.002057 Jy/beam
! Clean residual mean=-0.000000 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.0896135 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000208283 Jy
! Component: 100  -  total flux cleaned = 0.000279023 Jy
! Component: 150  -  total flux cleaned = 0.000345684 Jy
! Component: 200  -  total flux cleaned = 0.000447924 Jy
! Total flux subtracted in 200 components = 0.000447924 Jy
! Clean residual min=-0.002159 max=0.001991 Jy/beam
! Clean residual mean=0.000000 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.0900614 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 119 components and 0.0900614 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.593 mas, bmaj=5.392 mas, bpa=46.16 degrees
! Estimated noise=0.465041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100092 Jy
! Component: 100  -  total flux cleaned = -0.000233627 Jy
! Component: 150  -  total flux cleaned = -0.000329429 Jy
! Component: 200  -  total flux cleaned = -0.000374183 Jy
! Total flux subtracted in 200 components = -0.000374183 Jy
! Clean residual min=-0.001572 max=0.001653 Jy/beam
! Clean residual mean=0.000000 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.0896872 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 143 components and 0.0896872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020509Jy  sigma=0.685909
! Fit after  self-cal, rms=0.020500Jy  sigma=0.685547
wmodel /d2/scr/pima/bp177i_uvs/J1528+6739_C_map.mod
! Writing 143 model components to file: /d2/scr/pima/bp177i_uvs/J1528+6739_C_map.mod
wobs /d2/scr/pima/bp177i_uvs/J1528+6739_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177i_uvs/J1528+6739_C_uvs.fits
wwins /d2/scr/pima/bp177i_uvs/J1528+6739_C_map.win
! wwins: Wrote 3 windows to /d2/scr/pima/bp177i_uvs/J1528+6739_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -2.04873e-05 Jy
! Component: 100  -  total flux cleaned = 7.85118e-05 Jy
! Component: 150  -  total flux cleaned = 0.000265298 Jy
! Component: 200  -  total flux cleaned = 0.000331629 Jy
! Component: 250  -  total flux cleaned = 0.00039457 Jy
! Component: 300  -  total flux cleaned = 0.000434438 Jy
! Component: 350  -  total flux cleaned = 0.000454204 Jy
! Component: 400  -  total flux cleaned = 0.000583626 Jy
! Component: 450  -  total flux cleaned = 0.000619437 Jy
! Component: 500  -  total flux cleaned = 0.000723202 Jy
! Component: 550  -  total flux cleaned = 0.000756884 Jy
! Component: 600  -  total flux cleaned = 0.000838092 Jy
! Component: 650  -  total flux cleaned = 0.000917222 Jy
! Component: 700  -  total flux cleaned = 0.000963673 Jy
! Component: 750  -  total flux cleaned = 0.000994041 Jy
! Component: 800  -  total flux cleaned = 0.00103864 Jy
! Component: 850  -  total flux cleaned = 0.00106765 Jy
! Component: 900  -  total flux cleaned = 0.0011238 Jy
! Component: 950  -  total flux cleaned = 0.00115122 Jy
! Component: 1000  -  total flux cleaned = 0.00119162 Jy
! Component: 1050  -  total flux cleaned = 0.00120468 Jy
! Component: 1100  -  total flux cleaned = 0.00120489 Jy
! Component: 1150  -  total flux cleaned = 0.00128187 Jy
! Component: 1200  -  total flux cleaned = 0.00125655 Jy
! Component: 1250  -  total flux cleaned = 0.00128135 Jy
! Component: 1300  -  total flux cleaned = 0.00129342 Jy
! Component: 1350  -  total flux cleaned = 0.00126929 Jy
! Component: 1400  -  total flux cleaned = 0.00131642 Jy
! Component: 1450  -  total flux cleaned = 0.00129328 Jy
! Component: 1500  -  total flux cleaned = 0.00128213 Jy
! Component: 1550  -  total flux cleaned = 0.00125954 Jy
! Component: 1600  -  total flux cleaned = 0.00122624 Jy
! Component: 1650  -  total flux cleaned = 0.00120435 Jy
! Component: 1700  -  total flux cleaned = 0.00113919 Jy
! Component: 1750  -  total flux cleaned = 0.00108551 Jy
! Component: 1800  -  total flux cleaned = 0.00104299 Jy
! Component: 1850  -  total flux cleaned = 0.00101158 Jy
! Component: 1900  -  total flux cleaned = 0.000939254 Jy
! Component: 1950  -  total flux cleaned = 0.000908654 Jy
! Component: 2000  -  total flux cleaned = 0.000828162 Jy
! Component: 2050  -  total flux cleaned = 0.00079837 Jy
! Component: 2100  -  total flux cleaned = 0.000778719 Jy
! Component: 2150  -  total flux cleaned = 0.000720173 Jy
! Component: 2200  -  total flux cleaned = 0.000691338 Jy
! Component: 2250  -  total flux cleaned = 0.000691223 Jy
! Component: 2300  -  total flux cleaned = 0.000634742 Jy
! Component: 2350  -  total flux cleaned = 0.000634714 Jy
! Component: 2400  -  total flux cleaned = 0.000597808 Jy
! Component: 2450  -  total flux cleaned = 0.000542806 Jy
! Component: 2500  -  total flux cleaned = 0.000506573 Jy
! Component: 2550  -  total flux cleaned = 0.000461615 Jy
! Component: 2600  -  total flux cleaned = 0.000443748 Jy
! Component: 2650  -  total flux cleaned = 0.00038199 Jy
! Component: 2700  -  total flux cleaned = 0.000311898 Jy
! Component: 2750  -  total flux cleaned = 0.000259723 Jy
! Component: 2800  -  total flux cleaned = 0.000233867 Jy
! Component: 2850  -  total flux cleaned = 0.000148542 Jy
! Component: 2900  -  total flux cleaned = 0.000114545 Jy
! Component: 2950  -  total flux cleaned = 3.91984e-05 Jy
! Component: 3000  -  total flux cleaned = 1.42721e-05 Jy
! Component: 3050  -  total flux cleaned = -4.34163e-05 Jy
! Component: 3100  -  total flux cleaned = -5.14886e-05 Jy
! Component: 3150  -  total flux cleaned = -0.000116397 Jy
! Component: 3200  -  total flux cleaned = -0.000140607 Jy
! Component: 3250  -  total flux cleaned = -0.000180577 Jy
! Component: 3300  -  total flux cleaned = -0.000244025 Jy
! Component: 3350  -  total flux cleaned = -0.000283287 Jy
! Component: 3400  -  total flux cleaned = -0.000314589 Jy
! Component: 3450  -  total flux cleaned = -0.000384401 Jy
! Component: 3500  -  total flux cleaned = -0.00041529 Jy
! Component: 3550  -  total flux cleaned = -0.000453526 Jy
! Component: 3600  -  total flux cleaned = -0.000499136 Jy
! Component: 3650  -  total flux cleaned = -0.000536885 Jy
! Component: 3700  -  total flux cleaned = -0.000619304 Jy
! Component: 3750  -  total flux cleaned = -0.000641658 Jy
! Component: 3800  -  total flux cleaned = -0.000671315 Jy
! Component: 3850  -  total flux cleaned = -0.0007008 Jy
! Component: 3900  -  total flux cleaned = -0.00073013 Jy
! Component: 3950  -  total flux cleaned = -0.000759264 Jy
! Component: 4000  -  total flux cleaned = -0.000802626 Jy
! Component: 4050  -  total flux cleaned = -0.000816973 Jy
! Total flux subtracted in 4096 components = -0.000845541 Jy
! Clean residual min=-0.000425 max=0.000443 Jy/beam
! Clean residual mean=0.000001 rms=0.000132 Jy/beam
! Combined flux in latest and established models = 0.0888417 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 450 components and 0.0888417 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177i_uvs/J1528+6739_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.593 x 5.392 at 46.16 degrees (North through East)
! Clean map  min=-0.00089512  max=0.077446 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177i_uvs/J1528+6739_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0774458 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000129181 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.500404 0.500404 1.00081 2.00162 4.00324 8.00647 16.0129 32.0259 64.0518
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.077 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  599.515 
quit
! Quitting program
! Log file /d2/scr/pima/bp177i_uvs/J1528+6739_C_uvs.log closed on Tue Apr 15 00:31:11 2014