! Started logfile: /d2/scr/pima/bp177i_uvs/J0835+6835_X_uvs.log on Tue Apr 15 00:14:30 2014
obs /d2/scr/pima/bp177i_uvs/J0835+6835_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177i_uvs/J0835+6835_X_uva.fits
! AN table 1: 3 integrations on 21 of 21 possible baselines.
! AN table 2: 3 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.772727 visibilities/baseline/integration-bin.
! Found source: J0835+6835
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 408 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177i_uvs/J0835+6835_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.999851Jy  sigma=39.524257
! Fit after  self-cal, rms=0.985696Jy  sigma=39.907619
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.248 mas, bmaj=6.654 mas, bpa=45.11 degrees
! Estimated noise=1.14789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120424 Jy
! Component: 100  -  total flux cleaned = 0.0174441 Jy
! Total flux subtracted in 100 components = 0.0174441 Jy
! Clean residual min=-0.002346 max=0.002785 Jy/beam
! Clean residual mean=0.000000 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.0174441 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.0174441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017929Jy  sigma=0.682464
! Fit after  self-cal, rms=0.015616Jy  sigma=0.599165
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.567 mas, bmaj=6.445 mas, bpa=43.29 degrees
! Estimated noise=0.930017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00501895 Jy
! Component: 100  -  total flux cleaned = 0.00738672 Jy
! Component: 150  -  total flux cleaned = 0.00910294 Jy
! Component: 200  -  total flux cleaned = 0.0105149 Jy
! Total flux subtracted in 200 components = 0.0105149 Jy
! Clean residual min=-0.001185 max=0.001200 Jy/beam
! Clean residual mean=-0.000001 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.027959 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 102 components and 0.027959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013415Jy  sigma=0.520366
! Fit after  self-cal, rms=0.013308Jy  sigma=0.517034
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.567 x 6.445 at 43.29 degrees (North through East)
! Clean map  min=-0.001758  max=0.011038 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.013308Jy  sigma=0.517034
! Fit after  self-cal, rms=0.013308Jy  sigma=0.517034
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.567 mas, bmaj=6.445 mas, bpa=43.29 degrees
! Estimated noise=0.930017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165609 Jy
! Component: 100  -  total flux cleaned = 0.00247519 Jy
! Component: 150  -  total flux cleaned = 0.00285366 Jy
! Component: 200  -  total flux cleaned = 0.00318687 Jy
! Total flux subtracted in 200 components = 0.00318687 Jy
! Clean residual min=-0.000729 max=0.000737 Jy/beam
! Clean residual mean=0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0311459 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 167 components and 0.0311459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012798Jy  sigma=0.497661
! Fit after  self-cal, rms=0.012729Jy  sigma=0.495503
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012729Jy  sigma=0.495503
! Fit after  self-cal, rms=0.012729Jy  sigma=0.495503
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.567 mas, bmaj=6.445 mas, bpa=43.29 degrees
! Estimated noise=0.930017 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111862 Jy
! Component: 100  -  total flux cleaned = 0.00159613 Jy
! Component: 150  -  total flux cleaned = 0.00187642 Jy
! Component: 200  -  total flux cleaned = 0.00200016 Jy
! Total flux subtracted in 200 components = 0.00200016 Jy
! Clean residual min=-0.000503 max=0.000501 Jy/beam
! Clean residual mean=0.000001 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.033146 Jy
selfcal
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 226 components and 0.033146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012513Jy  sigma=0.487446
! Fit after  self-cal, rms=0.012488Jy  sigma=0.486528
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000577471 Jy
! Component: 100  -  total flux cleaned = 0.00081332 Jy
! Component: 150  -  total flux cleaned = 0.000892067 Jy
! Component: 200  -  total flux cleaned = 0.000843961 Jy
! Total flux subtracted in 200 components = 0.000843961 Jy
! Clean residual min=-0.000397 max=0.000396 Jy/beam
! Clean residual mean=0.000001 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.03399 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 283 components and 0.03399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012370Jy  sigma=0.482057
! Fit after  self-cal, rms=0.012363Jy  sigma=0.481759
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012363Jy  sigma=0.481759
! Fit after  self-cal, rms=0.012363Jy  sigma=0.481759
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.567 mas, bmaj=6.445 mas, bpa=43.29 degrees
! Estimated noise=0.930017 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000345341 Jy
! Component: 100  -  total flux cleaned = 0.000345625 Jy
! Component: 150  -  total flux cleaned = 0.000366915 Jy
! Component: 200  -  total flux cleaned = 0.000368221 Jy
! Total flux subtracted in 200 components = 0.000368221 Jy
! Clean residual min=-0.000323 max=0.000321 Jy/beam
! Clean residual mean=0.000001 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.0343582 Jy
selfcal
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 342 components and 0.0343582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012290Jy  sigma=0.479094
! Fit after  self-cal, rms=0.012288Jy  sigma=0.478966
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000270888 Jy
! Component: 100  -  total flux cleaned = 0.000346373 Jy
! Component: 150  -  total flux cleaned = 0.000382653 Jy
! Component: 200  -  total flux cleaned = 0.000382465 Jy
! Total flux subtracted in 200 components = 0.000382465 Jy
! Clean residual min=-0.000282 max=0.000284 Jy/beam
! Clean residual mean=0.000001 rms=0.000105 Jy/beam
! Combined flux in latest and established models = 0.0347407 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 389 components and 0.0347407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012239Jy  sigma=0.477116
! Fit after  self-cal, rms=0.012238Jy  sigma=0.477052
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012238Jy  sigma=0.477052
! Fit after  self-cal, rms=0.012023Jy  sigma=0.474465
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.896 mas, bmaj=6.412 mas, bpa=41.45 degrees
! Estimated noise=0.94732 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.23386e-05 Jy
! Component: 100  -  total flux cleaned = 8.49635e-05 Jy
! Component: 150  -  total flux cleaned = 0.000102572 Jy
! Component: 200  -  total flux cleaned = 0.000162186 Jy
! Total flux subtracted in 200 components = 0.000162186 Jy
! Clean residual min=-0.000244 max=0.000245 Jy/beam
! Clean residual mean=0.000000 rms=0.000085 Jy/beam
! Combined flux in latest and established models = 0.0349029 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 444 components and 0.0349029 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011984Jy  sigma=0.472825
! Fit after  self-cal, rms=0.011984Jy  sigma=0.472748
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.93796e-06 Jy
! Component: 100  -  total flux cleaned = 2.33893e-06 Jy
! Component: 150  -  total flux cleaned = 2.89837e-06 Jy
! Component: 200  -  total flux cleaned = 6.24231e-05 Jy
! Total flux subtracted in 200 components = 6.24231e-05 Jy
! Clean residual min=-0.000193 max=0.000194 Jy/beam
! Clean residual mean=0.000000 rms=0.000071 Jy/beam
! Combined flux in latest and established models = 0.0349653 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 498 components and 0.0349653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011959Jy  sigma=0.471827
! Fit after  self-cal, rms=0.011959Jy  sigma=0.471796
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.578 mas, bmaj=6.424 mas, bpa=43.25 degrees
! Estimated noise=0.924947 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.578 x 6.424 at 43.25 degrees (North through East)
! Clean map  min=-0.00080657  max=0.010139 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.259 mas, bmaj=6.6 mas, bpa=45.1 degrees
! Estimated noise=1.1446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137382 Jy
! Component: 100  -  total flux cleaned = 0.0200658 Jy
! Component: 150  -  total flux cleaned = 0.0236338 Jy
! Component: 200  -  total flux cleaned = 0.0251961 Jy
! Total flux subtracted in 200 components = 0.0251961 Jy
! Clean residual min=-0.001892 max=0.001907 Jy/beam
! Clean residual mean=-0.000002 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.0251961 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 62 model components to the UV plane model.
! The established model now contains 62 components and 0.0251961 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.578 mas, bmaj=6.424 mas, bpa=43.25 degrees
! Estimated noise=0.924947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00178656 Jy
! Component: 100  -  total flux cleaned = 0.00302075 Jy
! Component: 150  -  total flux cleaned = 0.00389179 Jy
! Component: 200  -  total flux cleaned = 0.00441712 Jy
! Total flux subtracted in 200 components = 0.00441712 Jy
! Clean residual min=-0.000921 max=0.000922 Jy/beam
! Clean residual mean=-0.000000 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.0296133 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 137 components and 0.0296133 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.896 mas, bmaj=6.412 mas, bpa=41.45 degrees
! Estimated noise=0.94732 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000736847 Jy
! Component: 100  -  total flux cleaned = 0.00119462 Jy
! Component: 150  -  total flux cleaned = 0.00171224 Jy
! Component: 200  -  total flux cleaned = 0.00201679 Jy
! Total flux subtracted in 200 components = 0.00201679 Jy
! Clean residual min=-0.000534 max=0.000535 Jy/beam
! Clean residual mean=-0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0316301 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000218264 Jy
! Component: 100  -  total flux cleaned = 0.000449061 Jy
! Component: 150  -  total flux cleaned = 0.000558355 Jy
! Component: 200  -  total flux cleaned = 0.000688678 Jy
! Total flux subtracted in 200 components = 0.000688678 Jy
! Clean residual min=-0.000422 max=0.000428 Jy/beam
! Clean residual mean=-0.000001 rms=0.000160 Jy/beam
! Combined flux in latest and established models = 0.0323187 Jy
! Adding 133 model components to the UV plane model.
! The established model now contains 265 components and 0.0323187 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.578 mas, bmaj=6.424 mas, bpa=43.25 degrees
! Estimated noise=0.924947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128562 Jy
! Component: 100  -  total flux cleaned = 0.000411278 Jy
! Component: 150  -  total flux cleaned = 0.000578897 Jy
! Component: 200  -  total flux cleaned = 0.000649751 Jy
! Total flux subtracted in 200 components = 0.000649751 Jy
! Clean residual min=-0.000282 max=0.000282 Jy/beam
! Clean residual mean=0.000001 rms=0.000108 Jy/beam
! Combined flux in latest and established models = 0.0329685 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 322 components and 0.0329685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012030Jy  sigma=0.474362
! Fit after  self-cal, rms=0.012023Jy  sigma=0.474120
wmodel /d2/scr/pima/bp177i_uvs/J0835+6835_X_map.mod
! Writing 322 model components to file: /d2/scr/pima/bp177i_uvs/J0835+6835_X_map.mod
wobs /d2/scr/pima/bp177i_uvs/J0835+6835_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177i_uvs/J0835+6835_X_uvs.fits
wwins /d2/scr/pima/bp177i_uvs/J0835+6835_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177i_uvs/J0835+6835_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.578 x 6.424 at 43.25 degrees (North through East)
! Clean map  min=-0.00081246  max=0.0079281 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177i_uvs/J0835+6835_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.00792808 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000101903 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.85604 3.85604 7.71208 15.4242 30.8483 61.6966
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.007 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  77.8 
quit
! Quitting program
! Log file /d2/scr/pima/bp177i_uvs/J0835+6835_X_uvs.log closed on Tue Apr 15 00:14:34 2014