! Started logfile: /d2/scr/pima/bp177i_uvs/J0801+7408_C_uvs.log on Tue Apr 15 00:18:00 2014
obs /d2/scr/pima/bp177i_uvs/J0801+7408_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177i_uvs/J0801+7408_C_uva.fits
! AN table 1: 5 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.617778 visibilities/baseline/integration-bin.
! Found source: J0801+7408
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1112 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177i_uvs/J0801+7408_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010317Jy  sigma=44.202501
! Fit after  self-cal, rms=0.891356Jy  sigma=38.932302
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.265 mas, bmaj=5.354 mas, bpa=-40.6 degrees
! Estimated noise=0.67933 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0764605 Jy
! Component: 100  -  total flux cleaned = 0.102001 Jy
! Total flux subtracted in 100 components = 0.102001 Jy
! Clean residual min=-0.004956 max=0.011797 Jy/beam
! Clean residual mean=0.000032 rms=0.001586 Jy/beam
! Combined flux in latest and established models = 0.102001 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.102001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035073Jy  sigma=1.353734
! Fit after  self-cal, rms=0.034697Jy  sigma=1.343730
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139225 Jy
! Component: 100  -  total flux cleaned = 0.0219674 Jy
! Total flux subtracted in 100 components = 0.0219674 Jy
! Clean residual min=-0.002891 max=0.004220 Jy/beam
! Clean residual mean=0.000010 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.123969 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.123969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025724Jy  sigma=0.875203
! Fit after  self-cal, rms=0.025588Jy  sigma=0.871921
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.564 mas, bmaj=5.488 mas, bpa=-41.99 degrees
! Estimated noise=0.510152 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00728124 Jy
! Component: 100  -  total flux cleaned = 0.0112484 Jy
! Component: 150  -  total flux cleaned = 0.0137331 Jy
! Component: 200  -  total flux cleaned = 0.0154281 Jy
! Total flux subtracted in 200 components = 0.0154281 Jy
! Clean residual min=-0.003101 max=0.002435 Jy/beam
! Clean residual mean=-0.000005 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.139397 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 37 components and 0.139397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023109Jy  sigma=0.756439
! Fit after  self-cal, rms=0.023080Jy  sigma=0.755317
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.564 x 5.488 at -41.99 degrees (North through East)
! Clean map  min=-0.0028775  max=0.10552 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        0.97     KP        0.90     
!   LA        1.00     MK        1.04     NL        1.07     OV        0.96     
!   PT        0.89     SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.16     HN        1.00     KP        0.91     
!   LA        1.11     MK        1.01     NL        1.13     OV        1.01     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.10     HN        0.99     KP        0.97     
!   LA        1.06     MK        1.03     NL        1.00     OV        0.95     
!   PT        1.00     SC        1.07     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.03     KP        0.98     
!   LA        1.05     MK        1.02     NL        1.05     OV        0.95     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.02     KP        0.99     
!   LA        1.10     MK        1.00     NL        0.98     OV        0.94     
!   PT        1.06     SC        1.08     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.93     HN        0.99     KP        0.91     
!   LA        1.01     MK        0.95     NL        1.03     OV        0.95     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        1.00     KP        0.98     
!   LA        1.02     MK        0.97     NL        1.05     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.023080Jy  sigma=0.755317
! Fit after  self-cal, rms=0.021065Jy  sigma=0.647569
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.601 mas, bmaj=5.47 mas, bpa=-42.17 degrees
! Estimated noise=0.511891 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106757 Jy
! Component: 100  -  total flux cleaned = 0.00128386 Jy
! Component: 150  -  total flux cleaned = 0.00143363 Jy
! Component: 200  -  total flux cleaned = 0.00145568 Jy
! Total flux subtracted in 200 components = 0.00145568 Jy
! Clean residual min=-0.001766 max=0.001487 Jy/beam
! Clean residual mean=0.000000 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.140853 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 58 components and 0.140852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020914Jy  sigma=0.643397
! Fit after  self-cal, rms=0.020908Jy  sigma=0.643053
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020908Jy  sigma=0.643053
! Fit after  self-cal, rms=0.020926Jy  sigma=0.641324
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.598 mas, bmaj=5.469 mas, bpa=-42.14 degrees
! Estimated noise=0.515122 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100939 Jy
! Component: 100  -  total flux cleaned = 0.00111133 Jy
! Component: 150  -  total flux cleaned = 0.00115199 Jy
! Component: 200  -  total flux cleaned = 0.00118906 Jy
! Total flux subtracted in 200 components = 0.00118906 Jy
! Clean residual min=-0.001720 max=0.001466 Jy/beam
! Clean residual mean=0.000001 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.142042 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 67 components and 0.142042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020814Jy  sigma=0.638764
! Fit after  self-cal, rms=0.020813Jy  sigma=0.638677
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.20026e-05 Jy
! Component: 100  -  total flux cleaned = 6.20322e-05 Jy
! Component: 150  -  total flux cleaned = 9.06624e-05 Jy
! Component: 200  -  total flux cleaned = 0.000103751 Jy
! Total flux subtracted in 200 components = 0.000103751 Jy
! Clean residual min=-0.001674 max=0.001474 Jy/beam
! Clean residual mean=0.000000 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.142145 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 78 components and 0.142145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020783Jy  sigma=0.637956
! Fit after  self-cal, rms=0.020783Jy  sigma=0.637913
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020783Jy  sigma=0.637913
! Fit after  self-cal, rms=0.020809Jy  sigma=0.635898
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.596 mas, bmaj=5.468 mas, bpa=-42.12 degrees
! Estimated noise=0.518739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000864661 Jy
! Component: 100  -  total flux cleaned = 0.000948717 Jy
! Component: 150  -  total flux cleaned = 0.000963881 Jy
! Component: 200  -  total flux cleaned = 0.00100743 Jy
! Total flux subtracted in 200 components = 0.00100743 Jy
! Clean residual min=-0.001664 max=0.001469 Jy/beam
! Clean residual mean=0.000001 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.143153 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 82 components and 0.143153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020722Jy  sigma=0.634311
! Fit after  self-cal, rms=0.020723Jy  sigma=0.634286
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.33652e-05 Jy
! Component: 100  -  total flux cleaned = 6.54909e-05 Jy
! Component: 150  -  total flux cleaned = 9.94602e-05 Jy
! Component: 200  -  total flux cleaned = 0.000130797 Jy
! Total flux subtracted in 200 components = 0.000130797 Jy
! Clean residual min=-0.001655 max=0.001471 Jy/beam
! Clean residual mean=0.000000 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.143284 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 84 components and 0.143284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020703Jy  sigma=0.633880
! Fit after  self-cal, rms=0.020703Jy  sigma=0.633863
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020703Jy  sigma=0.633863
! Fit after  self-cal, rms=0.020733Jy  sigma=0.632302
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.63 mas, bmaj=6.052 mas, bpa=-47.27 degrees
! Estimated noise=0.642919 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000920121 Jy
! Component: 100  -  total flux cleaned = 0.000996097 Jy
! Component: 150  -  total flux cleaned = 0.00106019 Jy
! Component: 200  -  total flux cleaned = 0.0010605 Jy
! Total flux subtracted in 200 components = 0.0010605 Jy
! Clean residual min=-0.002218 max=0.002021 Jy/beam
! Clean residual mean=0.000001 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.144344 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 100 components and 0.144344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020672Jy  sigma=0.631948
! Fit after  self-cal, rms=0.020667Jy  sigma=0.631713
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.23392e-06 Jy
! Component: 100  -  total flux cleaned = 5.22729e-06 Jy
! Component: 150  -  total flux cleaned = 1.11427e-05 Jy
! Component: 200  -  total flux cleaned = 1.56509e-05 Jy
! Total flux subtracted in 200 components = 1.56509e-05 Jy
! Clean residual min=-0.002238 max=0.002043 Jy/beam
! Clean residual mean=0.000001 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.14436 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 107 components and 0.14436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020665Jy  sigma=0.631604
! Fit after  self-cal, rms=0.020664Jy  sigma=0.631586
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.594 mas, bmaj=5.466 mas, bpa=-42.09 degrees
! Estimated noise=0.52202 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.594 x 5.466 at -42.09 degrees (North through East)
! Clean map  min=-0.0016599  max=0.10896 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.273 mas, bmaj=5.328 mas, bpa=-40.87 degrees
! Estimated noise=0.695615 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0784506 Jy
! Component: 100  -  total flux cleaned = 0.105931 Jy
! Component: 150  -  total flux cleaned = 0.12001 Jy
! Component: 200  -  total flux cleaned = 0.127928 Jy
! Total flux subtracted in 200 components = 0.127928 Jy
! Clean residual min=-0.002413 max=0.004116 Jy/beam
! Clean residual mean=0.000014 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.127928 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.127928 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.594 mas, bmaj=5.466 mas, bpa=-42.09 degrees
! Estimated noise=0.52202 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00707371 Jy
! Component: 100  -  total flux cleaned = 0.0106055 Jy
! Component: 150  -  total flux cleaned = 0.0126469 Jy
! Component: 200  -  total flux cleaned = 0.0140108 Jy
! Total flux subtracted in 200 components = 0.0140108 Jy
! Clean residual min=-0.001785 max=0.001707 Jy/beam
! Clean residual mean=0.000005 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.141939 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 41 components and 0.141939 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.63 mas, bmaj=6.052 mas, bpa=-47.27 degrees
! Estimated noise=0.642919 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115146 Jy
! Component: 100  -  total flux cleaned = 0.00179681 Jy
! Component: 150  -  total flux cleaned = 0.00216921 Jy
! Component: 200  -  total flux cleaned = 0.00225498 Jy
! Total flux subtracted in 200 components = 0.00225498 Jy
! Clean residual min=-0.002252 max=0.002088 Jy/beam
! Clean residual mean=0.000001 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.144194 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.80528e-05 Jy
! Component: 100  -  total flux cleaned = 9.66629e-05 Jy
! Component: 150  -  total flux cleaned = 0.000102918 Jy
! Component: 200  -  total flux cleaned = 0.000109296 Jy
! Total flux subtracted in 200 components = 0.000109296 Jy
! Clean residual min=-0.002236 max=0.002070 Jy/beam
! Clean residual mean=0.000001 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.144304 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 59 components and 0.144304 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.594 mas, bmaj=5.466 mas, bpa=-42.09 degrees
! Estimated noise=0.52202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00023117 Jy
! Component: 100  -  total flux cleaned = -0.000256561 Jy
! Component: 150  -  total flux cleaned = -0.000194946 Jy
! Component: 200  -  total flux cleaned = -0.000175635 Jy
! Total flux subtracted in 200 components = -0.000175635 Jy
! Clean residual min=-0.001730 max=0.001513 Jy/beam
! Clean residual mean=0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.144128 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 71 components and 0.144128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020718Jy  sigma=0.634716
! Fit after  self-cal, rms=0.020712Jy  sigma=0.634605
wmodel /d2/scr/pima/bp177i_uvs/J0801+7408_C_map.mod
! Writing 71 model components to file: /d2/scr/pima/bp177i_uvs/J0801+7408_C_map.mod
wobs /d2/scr/pima/bp177i_uvs/J0801+7408_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177i_uvs/J0801+7408_C_uvs.fits
wwins /d2/scr/pima/bp177i_uvs/J0801+7408_C_map.win
! wwins: Wrote 1 windows to /d2/scr/pima/bp177i_uvs/J0801+7408_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000647462 Jy
! Component: 100  -  total flux cleaned = -0.000757731 Jy
! Component: 150  -  total flux cleaned = -0.000809641 Jy
! Component: 200  -  total flux cleaned = -0.000934848 Jy
! Component: 250  -  total flux cleaned = -0.000911361 Jy
! Component: 300  -  total flux cleaned = -0.00091187 Jy
! Component: 350  -  total flux cleaned = -0.000866496 Jy
! Component: 400  -  total flux cleaned = -0.000822868 Jy
! Component: 450  -  total flux cleaned = -0.000844011 Jy
! Component: 500  -  total flux cleaned = -0.000781937 Jy
! Component: 550  -  total flux cleaned = -0.000742292 Jy
! Component: 600  -  total flux cleaned = -0.000741494 Jy
! Component: 650  -  total flux cleaned = -0.000664467 Jy
! Component: 700  -  total flux cleaned = -0.000570815 Jy
! Component: 750  -  total flux cleaned = -0.000534469 Jy
! Component: 800  -  total flux cleaned = -0.000516833 Jy
! Component: 850  -  total flux cleaned = -0.000463921 Jy
! Component: 900  -  total flux cleaned = -0.000446931 Jy
! Component: 950  -  total flux cleaned = -0.000430135 Jy
! Component: 1000  -  total flux cleaned = -0.00041357 Jy
! Component: 1050  -  total flux cleaned = -0.000397394 Jy
! Component: 1100  -  total flux cleaned = -0.000381369 Jy
! Component: 1150  -  total flux cleaned = -0.000365368 Jy
! Component: 1200  -  total flux cleaned = -0.000349671 Jy
! Component: 1250  -  total flux cleaned = -0.000349468 Jy
! Component: 1300  -  total flux cleaned = -0.000319458 Jy
! Component: 1350  -  total flux cleaned = -0.000334225 Jy
! Component: 1400  -  total flux cleaned = -0.00027658 Jy
! Component: 1450  -  total flux cleaned = -0.000347823 Jy
! Component: 1500  -  total flux cleaned = -0.000319877 Jy
! Component: 1550  -  total flux cleaned = -0.00027852 Jy
! Component: 1600  -  total flux cleaned = -0.000238108 Jy
! Component: 1650  -  total flux cleaned = -0.000251663 Jy
! Component: 1700  -  total flux cleaned = -0.000238381 Jy
! Component: 1750  -  total flux cleaned = -0.000160283 Jy
! Component: 1800  -  total flux cleaned = -0.000198814 Jy
! Component: 1850  -  total flux cleaned = -0.000173385 Jy
! Component: 1900  -  total flux cleaned = -0.00018568 Jy
! Component: 1950  -  total flux cleaned = -0.000160977 Jy
! Component: 2000  -  total flux cleaned = -0.000173139 Jy
! Component: 2050  -  total flux cleaned = -0.000185001 Jy
! Component: 2100  -  total flux cleaned = -0.000184733 Jy
! Component: 2150  -  total flux cleaned = -0.000207896 Jy
! Component: 2200  -  total flux cleaned = -0.000196077 Jy
! Component: 2250  -  total flux cleaned = -0.000184643 Jy
! Component: 2300  -  total flux cleaned = -0.000195828 Jy
! Component: 2350  -  total flux cleaned = -0.000195671 Jy
! Component: 2400  -  total flux cleaned = -0.000206638 Jy
! Component: 2450  -  total flux cleaned = -0.000271788 Jy
! Component: 2500  -  total flux cleaned = -0.00025021 Jy
! Component: 2550  -  total flux cleaned = -0.000334778 Jy
! Component: 2600  -  total flux cleaned = -0.000334581 Jy
! Component: 2650  -  total flux cleaned = -0.000324202 Jy
! Component: 2700  -  total flux cleaned = -0.000314038 Jy
! Component: 2750  -  total flux cleaned = -0.000344591 Jy
! Component: 2800  -  total flux cleaned = -0.000364827 Jy
! Component: 2850  -  total flux cleaned = -0.000344843 Jy
! Component: 2900  -  total flux cleaned = -0.000335168 Jy
! Component: 2950  -  total flux cleaned = -0.0003933 Jy
! Component: 3000  -  total flux cleaned = -0.000383831 Jy
! Component: 3050  -  total flux cleaned = -0.000383779 Jy
! Component: 3100  -  total flux cleaned = -0.000346188 Jy
! Component: 3150  -  total flux cleaned = -0.000346001 Jy
! Component: 3200  -  total flux cleaned = -0.000318441 Jy
! Component: 3250  -  total flux cleaned = -0.000309143 Jy
! Component: 3300  -  total flux cleaned = -0.000282009 Jy
! Component: 3350  -  total flux cleaned = -0.000273047 Jy
! Component: 3400  -  total flux cleaned = -0.000272935 Jy
! Component: 3450  -  total flux cleaned = -0.000229079 Jy
! Component: 3500  -  total flux cleaned = -0.000228974 Jy
! Component: 3550  -  total flux cleaned = -0.000203202 Jy
! Component: 3600  -  total flux cleaned = -0.000177661 Jy
! Component: 3650  -  total flux cleaned = -0.000152266 Jy
! Component: 3700  -  total flux cleaned = -0.000135535 Jy
! Component: 3750  -  total flux cleaned = -0.000143692 Jy
! Component: 3800  -  total flux cleaned = -8.60384e-05 Jy
! Component: 3850  -  total flux cleaned = -3.70229e-05 Jy
! Component: 3900  -  total flux cleaned = -6.95282e-05 Jy
! Component: 3950  -  total flux cleaned = -4.54575e-05 Jy
! Component: 4000  -  total flux cleaned = -4.53859e-05 Jy
! Component: 4050  -  total flux cleaned = -1.36947e-05 Jy
! Total flux subtracted in 4096 components = 2.55854e-05 Jy
! Clean residual min=-0.000455 max=0.000476 Jy/beam
! Clean residual mean=0.000001 rms=0.000145 Jy/beam
! Combined flux in latest and established models = 0.144154 Jy
keep
! Adding 305 model components to the UV plane model.
! The established model now contains 376 components and 0.144154 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177i_uvs/J0801+7408_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.594 x 5.466 at -42.09 degrees (North through East)
! Clean map  min=-0.00086932  max=0.10924 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177i_uvs/J0801+7408_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.109236 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000144008 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.395497 0.395497 0.790994 1.58199 3.16398 6.32795 12.6559 25.3118 50.6236
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.109 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  758.539 
quit
! Quitting program
! Log file /d2/scr/pima/bp177i_uvs/J0801+7408_C_uvs.log closed on Tue Apr 15 00:18:05 2014