! Started logfile: /d2/scr/pima/bp177i_uvs/J0801+5455_C_uvs.log on Tue Apr 15 00:17:53 2014
obs /d2/scr/pima/bp177i_uvs/J0801+5455_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177i_uvs/J0801+5455_C_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.6 visibilities/baseline/integration-bin.
! Found source: J0801+5455
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1512 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177i_uvs/J0801+5455_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000585Jy  sigma=42.219554
! Fit after  self-cal, rms=0.980782Jy  sigma=41.375224
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.251 mas, bmaj=4.609 mas, bpa=-1.713 degrees
! Estimated noise=0.624271 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0150081 Jy
! Component: 100  -  total flux cleaned = 0.0184634 Jy
! Total flux subtracted in 100 components = 0.0184634 Jy
! Clean residual min=-0.001701 max=0.001950 Jy/beam
! Clean residual mean=0.000000 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.0184634 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0184634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017494Jy  sigma=0.673822
! Fit after  self-cal, rms=0.014939Jy  sigma=0.563631
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268089 Jy
! Component: 100  -  total flux cleaned = 0.00391137 Jy
! Total flux subtracted in 100 components = 0.00391137 Jy
! Clean residual min=-0.001395 max=0.001575 Jy/beam
! Clean residual mean=0.000001 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.0223747 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 15 components and 0.0223747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014424Jy  sigma=0.539047
! Fit after  self-cal, rms=0.014421Jy  sigma=0.538899
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.505 mas, bmaj=4.545 mas, bpa=-1.118 degrees
! Estimated noise=0.442497 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112347 Jy
! Component: 100  -  total flux cleaned = 0.00177943 Jy
! Component: 150  -  total flux cleaned = 0.00204748 Jy
! Component: 200  -  total flux cleaned = 0.00218213 Jy
! Total flux subtracted in 200 components = 0.00218213 Jy
! Clean residual min=-0.001108 max=0.001141 Jy/beam
! Clean residual mean=0.000002 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.0245568 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 28 components and 0.0245568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014316Jy  sigma=0.534775
! Fit after  self-cal, rms=0.014314Jy  sigma=0.534643
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.505 x 4.545 at -1.118 degrees (North through East)
! Clean map  min=-0.0010432  max=0.02156 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.014314Jy  sigma=0.534643
! Fit after  self-cal, rms=0.014268Jy  sigma=0.535642
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.532 mas, bmaj=4.56 mas, bpa=-1.117 degrees
! Estimated noise=0.444067 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000280691 Jy
! Component: 100  -  total flux cleaned = 0.00036658 Jy
! Component: 150  -  total flux cleaned = 0.000408321 Jy
! Component: 200  -  total flux cleaned = 0.000420828 Jy
! Total flux subtracted in 200 components = 0.000420828 Jy
! Clean residual min=-0.001070 max=0.001086 Jy/beam
! Clean residual mean=0.000002 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0249777 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 35 components and 0.0249777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014256Jy  sigma=0.535226
! Fit after  self-cal, rms=0.014255Jy  sigma=0.535197
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014255Jy  sigma=0.535197
! Fit after  self-cal, rms=0.014255Jy  sigma=0.535197
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.532 mas, bmaj=4.56 mas, bpa=-1.117 degrees
! Estimated noise=0.444067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.24e-05 Jy
! Component: 100  -  total flux cleaned = 3.49268e-05 Jy
! Component: 150  -  total flux cleaned = 4.60863e-05 Jy
! Component: 200  -  total flux cleaned = 5.14897e-05 Jy
! Total flux subtracted in 200 components = 5.14897e-05 Jy
! Clean residual min=-0.001074 max=0.001066 Jy/beam
! Clean residual mean=0.000002 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.0250292 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 38 components and 0.0250292 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014251Jy  sigma=0.535001
! Fit after  self-cal, rms=0.014251Jy  sigma=0.534991
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.31339e-05 Jy
! Component: 100  -  total flux cleaned = 1.81774e-05 Jy
! Component: 150  -  total flux cleaned = 2.302e-05 Jy
! Component: 200  -  total flux cleaned = 3.20672e-05 Jy
! Total flux subtracted in 200 components = 3.20672e-05 Jy
! Clean residual min=-0.001077 max=0.001058 Jy/beam
! Clean residual mean=0.000002 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.0250612 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 38 components and 0.0250612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014248Jy  sigma=0.534852
! Fit after  self-cal, rms=0.014247Jy  sigma=0.534843
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014247Jy  sigma=0.534843
! Fit after  self-cal, rms=0.014247Jy  sigma=0.534843
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.532 mas, bmaj=4.56 mas, bpa=-1.117 degrees
! Estimated noise=0.444067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.21689e-05 Jy
! Component: 100  -  total flux cleaned = 1.65612e-05 Jy
! Component: 150  -  total flux cleaned = 2.06715e-05 Jy
! Component: 200  -  total flux cleaned = 2.4802e-05 Jy
! Total flux subtracted in 200 components = 2.4802e-05 Jy
! Clean residual min=-0.001080 max=0.001054 Jy/beam
! Clean residual mean=0.000002 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.025086 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 39 components and 0.025086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014245Jy  sigma=0.534738
! Fit after  self-cal, rms=0.014245Jy  sigma=0.534731
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.14152e-05 Jy
! Component: 100  -  total flux cleaned = 1.54263e-05 Jy
! Component: 150  -  total flux cleaned = 1.91212e-05 Jy
! Component: 200  -  total flux cleaned = 2.27391e-05 Jy
! Total flux subtracted in 200 components = 2.27391e-05 Jy
! Clean residual min=-0.001082 max=0.001054 Jy/beam
! Clean residual mean=0.000002 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.0251088 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 0.0251088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014243Jy  sigma=0.534646
! Fit after  self-cal, rms=0.014243Jy  sigma=0.534638
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014243Jy  sigma=0.534638
! Fit after  self-cal, rms=0.014243Jy  sigma=0.534638
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.45 mas, bmaj=5.006 mas, bpa=0.498 degrees
! Estimated noise=0.558026 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00047184 Jy
! Component: 100  -  total flux cleaned = 0.000531006 Jy
! Component: 150  -  total flux cleaned = 0.000568753 Jy
! Component: 200  -  total flux cleaned = 0.000587571 Jy
! Total flux subtracted in 200 components = 0.000587571 Jy
! Clean residual min=-0.001131 max=0.001254 Jy/beam
! Clean residual mean=0.000003 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.0256963 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 45 components and 0.0256963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014251Jy  sigma=0.534981
! Fit after  self-cal, rms=0.014248Jy  sigma=0.534906
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.48289e-06 Jy
! Component: 100  -  total flux cleaned = 2.53578e-05 Jy
! Component: 150  -  total flux cleaned = 3.03791e-05 Jy
! Component: 200  -  total flux cleaned = 3.51236e-05 Jy
! Total flux subtracted in 200 components = 3.51236e-05 Jy
! Clean residual min=-0.001131 max=0.001247 Jy/beam
! Clean residual mean=0.000003 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.0257315 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 49 components and 0.0257315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014252Jy  sigma=0.535102
! Fit after  self-cal, rms=0.014251Jy  sigma=0.535057
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.532 mas, bmaj=4.56 mas, bpa=-1.117 degrees
! Estimated noise=0.444067 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.532 x 4.56 at -1.117 degrees (North through East)
! Clean map  min=-0.0010116  max=0.021616 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.249 mas, bmaj=4.604 mas, bpa=-1.773 degrees
! Estimated noise=0.628057 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.016474 Jy
! Component: 100  -  total flux cleaned = 0.0203728 Jy
! Component: 150  -  total flux cleaned = 0.0220793 Jy
! Component: 200  -  total flux cleaned = 0.0231212 Jy
! Total flux subtracted in 200 components = 0.0231212 Jy
! Clean residual min=-0.001405 max=0.001626 Jy/beam
! Clean residual mean=0.000001 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.0231212 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0231212 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.532 mas, bmaj=4.56 mas, bpa=-1.117 degrees
! Estimated noise=0.444067 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (29.7, 75.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122034 Jy
! Component: 100  -  total flux cleaned = 0.0019593 Jy
! Component: 150  -  total flux cleaned = 0.00238023 Jy
! Component: 200  -  total flux cleaned = 0.00257785 Jy
! Total flux subtracted in 200 components = 0.00257785 Jy
! Clean residual min=-0.001080 max=0.001123 Jy/beam
! Clean residual mean=0.000002 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.0256991 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 34 components and 0.0256991 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.45 mas, bmaj=5.006 mas, bpa=0.498 degrees
! Estimated noise=0.558026 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000548748 Jy
! Component: 100  -  total flux cleaned = 0.000625179 Jy
! Component: 150  -  total flux cleaned = 0.000625288 Jy
! Component: 200  -  total flux cleaned = 0.000643862 Jy
! Total flux subtracted in 200 components = 0.000643862 Jy
! Clean residual min=-0.001096 max=0.001127 Jy/beam
! Clean residual mean=0.000003 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.0263429 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.84456e-06 Jy
! Component: 100  -  total flux cleaned = 2.19996e-05 Jy
! Component: 150  -  total flux cleaned = 3.48937e-05 Jy
! Component: 200  -  total flux cleaned = 4.64829e-05 Jy
! Total flux subtracted in 200 components = 4.64829e-05 Jy
! Clean residual min=-0.001049 max=0.001120 Jy/beam
! Clean residual mean=0.000003 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.0263894 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 49 components and 0.0263894 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.532 mas, bmaj=4.56 mas, bpa=-1.117 degrees
! Estimated noise=0.444067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000180103 Jy
! Component: 100  -  total flux cleaned = -0.000223555 Jy
! Component: 150  -  total flux cleaned = -0.000223408 Jy
! Component: 200  -  total flux cleaned = -0.000213018 Jy
! Total flux subtracted in 200 components = -0.000213018 Jy
! Clean residual min=-0.001100 max=0.001120 Jy/beam
! Clean residual mean=0.000002 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.0261764 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 61 components and 0.0261764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014187Jy  sigma=0.532176
! Fit after  self-cal, rms=0.014167Jy  sigma=0.531601
wmodel /d2/scr/pima/bp177i_uvs/J0801+5455_C_map.mod
! Writing 61 model components to file: /d2/scr/pima/bp177i_uvs/J0801+5455_C_map.mod
wobs /d2/scr/pima/bp177i_uvs/J0801+5455_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177i_uvs/J0801+5455_C_uvs.fits
wwins /d2/scr/pima/bp177i_uvs/J0801+5455_C_map.win
! wwins: Wrote 2 windows to /d2/scr/pima/bp177i_uvs/J0801+5455_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -5.94509e-05 Jy
! Component: 100  -  total flux cleaned = -7.80103e-05 Jy
! Component: 150  -  total flux cleaned = -9.44479e-05 Jy
! Component: 200  -  total flux cleaned = -0.000126536 Jy
! Component: 250  -  total flux cleaned = -9.59607e-05 Jy
! Component: 300  -  total flux cleaned = -0.000111033 Jy
! Component: 350  -  total flux cleaned = -0.000110851 Jy
! Component: 400  -  total flux cleaned = -6.90432e-05 Jy
! Component: 450  -  total flux cleaned = -9.64217e-05 Jy
! Component: 500  -  total flux cleaned = -7.03757e-05 Jy
! Component: 550  -  total flux cleaned = -1.96356e-05 Jy
! Component: 600  -  total flux cleaned = -3.18944e-05 Jy
! Component: 650  -  total flux cleaned = 4.4483e-06 Jy
! Component: 700  -  total flux cleaned = 1.61951e-05 Jy
! Component: 750  -  total flux cleaned = 1.59997e-05 Jy
! Component: 800  -  total flux cleaned = 4.40889e-06 Jy
! Component: 850  -  total flux cleaned = 2.65377e-05 Jy
! Component: 900  -  total flux cleaned = 2.64542e-05 Jy
! Component: 950  -  total flux cleaned = 4.79367e-05 Jy
! Component: 1000  -  total flux cleaned = 5.83785e-05 Jy
! Component: 1050  -  total flux cleaned = 6.86204e-05 Jy
! Component: 1100  -  total flux cleaned = 4.81961e-05 Jy
! Component: 1150  -  total flux cleaned = 4.81997e-05 Jy
! Component: 1200  -  total flux cleaned = 6.77124e-05 Jy
! Component: 1250  -  total flux cleaned = 6.76889e-05 Jy
! Component: 1300  -  total flux cleaned = 9.66336e-05 Jy
! Component: 1350  -  total flux cleaned = 0.000144035 Jy
! Component: 1400  -  total flux cleaned = 0.000172132 Jy
! Component: 1450  -  total flux cleaned = 0.000172109 Jy
! Component: 1500  -  total flux cleaned = 0.000227178 Jy
! Component: 1550  -  total flux cleaned = 0.000218191 Jy
! Component: 1600  -  total flux cleaned = 0.00025423 Jy
! Component: 1650  -  total flux cleaned = 0.000272023 Jy
! Component: 1700  -  total flux cleaned = 0.000306996 Jy
! Component: 1750  -  total flux cleaned = 0.000324027 Jy
! Component: 1800  -  total flux cleaned = 0.000341027 Jy
! Component: 1850  -  total flux cleaned = 0.000357838 Jy
! Component: 1900  -  total flux cleaned = 0.000357813 Jy
! Component: 1950  -  total flux cleaned = 0.000382555 Jy
! Component: 2000  -  total flux cleaned = 0.000390823 Jy
! Component: 2050  -  total flux cleaned = 0.000382834 Jy
! Component: 2100  -  total flux cleaned = 0.000414683 Jy
! Component: 2150  -  total flux cleaned = 0.000422494 Jy
! Component: 2200  -  total flux cleaned = 0.00039892 Jy
! Component: 2250  -  total flux cleaned = 0.000414414 Jy
! Component: 2300  -  total flux cleaned = 0.000422055 Jy
! Component: 2350  -  total flux cleaned = 0.000368804 Jy
! Component: 2400  -  total flux cleaned = 0.000391462 Jy
! Component: 2450  -  total flux cleaned = 0.000398972 Jy
! Component: 2500  -  total flux cleaned = 0.000384228 Jy
! Component: 2550  -  total flux cleaned = 0.000384331 Jy
! Component: 2600  -  total flux cleaned = 0.000369927 Jy
! Component: 2650  -  total flux cleaned = 0.000391537 Jy
! Component: 2700  -  total flux cleaned = 0.000377309 Jy
! Component: 2750  -  total flux cleaned = 0.000370235 Jy
! Component: 2800  -  total flux cleaned = 0.000384229 Jy
! Component: 2850  -  total flux cleaned = 0.000363334 Jy
! Component: 2900  -  total flux cleaned = 0.000349438 Jy
! Component: 2950  -  total flux cleaned = 0.000322137 Jy
! Component: 3000  -  total flux cleaned = 0.000349315 Jy
! Component: 3050  -  total flux cleaned = 0.000288685 Jy
! Component: 3100  -  total flux cleaned = 0.000275349 Jy
! Component: 3150  -  total flux cleaned = 0.000268717 Jy
! Component: 3200  -  total flux cleaned = 0.000262177 Jy
! Component: 3250  -  total flux cleaned = 0.000249126 Jy
! Component: 3300  -  total flux cleaned = 0.000255661 Jy
! Component: 3350  -  total flux cleaned = 0.000236397 Jy
! Component: 3400  -  total flux cleaned = 0.000236482 Jy
! Component: 3450  -  total flux cleaned = 0.000236481 Jy
! Component: 3500  -  total flux cleaned = 0.000249029 Jy
! Component: 3550  -  total flux cleaned = 0.000249023 Jy
! Component: 3600  -  total flux cleaned = 0.000249022 Jy
! Component: 3650  -  total flux cleaned = 0.000249064 Jy
! Component: 3700  -  total flux cleaned = 0.000273581 Jy
! Component: 3750  -  total flux cleaned = 0.000267522 Jy
! Component: 3800  -  total flux cleaned = 0.000279692 Jy
! Component: 3850  -  total flux cleaned = 0.000285718 Jy
! Component: 3900  -  total flux cleaned = 0.000291623 Jy
! Component: 3950  -  total flux cleaned = 0.000309369 Jy
! Component: 4000  -  total flux cleaned = 0.000309411 Jy
! Component: 4050  -  total flux cleaned = 0.000344512 Jy
! Total flux subtracted in 4096 components = 0.000332918 Jy
! Clean residual min=-0.000356 max=0.000315 Jy/beam
! Clean residual mean=0.000000 rms=0.000104 Jy/beam
! Combined flux in latest and established models = 0.0265093 Jy
keep
! Adding 325 model components to the UV plane model.
! The established model now contains 386 components and 0.0265093 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177i_uvs/J0801+5455_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.532 x 4.56 at -1.117 degrees (North through East)
! Clean map  min=-0.00059358  max=0.021437 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177i_uvs/J0801+5455_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0214373 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000102897 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.43997 1.43997 2.87994 5.75988 11.5198 23.0395 46.079 92.1581
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.021 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  208.337 
quit
! Quitting program
! Log file /d2/scr/pima/bp177i_uvs/J0801+5455_C_uvs.log closed on Tue Apr 15 00:17:59 2014