! Started logfile: /d2/scr/pima/bp177i_uvs/J0755+5509_C_uvs.log on Tue Apr 15 00:17:43 2014
obs /d2/scr/pima/bp177i_uvs/J0755+5509_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177i_uvs/J0755+5509_C_uva.fits
! AN table 1: 2 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.52381 visibilities/baseline/integration-bin.
! Found source: J0755+5509
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 176 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177i_uvs/J0755+5509_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999955Jy  sigma=57.433190
! Fit after  self-cal, rms=0.974235Jy  sigma=57.854520
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.67 mas, bmaj=15.7 mas, bpa=-0.1981 degrees
! Estimated noise=1.15463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0200004 Jy
! Component: 100  -  total flux cleaned = 0.0236524 Jy
! Total flux subtracted in 100 components = 0.0236524 Jy
! Clean residual min=-0.003425 max=0.003468 Jy/beam
! Clean residual mean=-0.000012 rms=0.001511 Jy/beam
! Combined flux in latest and established models = 0.0236524 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.0236524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014002Jy  sigma=0.668429
! Fit after  self-cal, rms=0.013842Jy  sigma=0.657996
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.993 mas, bmaj=16.05 mas, bpa=7.72 degrees
! Estimated noise=1.0209 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237391 Jy
! Component: 100  -  total flux cleaned = 0.00374615 Jy
! Component: 150  -  total flux cleaned = 0.00383977 Jy
! Component: 200  -  total flux cleaned = 0.00381538 Jy
! Total flux subtracted in 200 components = 0.00381538 Jy
! Clean residual min=-0.001035 max=0.001034 Jy/beam
! Clean residual mean=0.000000 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.0274678 Jy
! Performing phase self-cal
! Adding 83 model components to the UV plane model.
! The established model now contains 110 components and 0.0274678 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011361Jy  sigma=0.527174
! Fit after  self-cal, rms=0.011344Jy  sigma=0.525528
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.993 x 16.05 at 7.72 degrees (North through East)
! Clean map  min=-0.002973  max=0.024172 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     HN        1.00*    KP        1.10     LA        0.92     
!   NL        1.00*    OV        1.10     PT        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        1.00*    KP        1.11     LA        1.00     
!   NL        1.00*    OV        0.98     PT        0.85     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     HN        1.00*    KP        1.05     LA        0.93     
!   NL        1.00*    OV        1.02     PT        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        1.00*    KP        1.10     LA        0.95     
!   NL        1.00*    OV        0.99     PT        0.97     
! 
! 
! Fit before self-cal, rms=0.011344Jy  sigma=0.525528
! Fit after  self-cal, rms=0.011154Jy  sigma=0.514278
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.011 mas, bmaj=16.15 mas, bpa=7.718 degrees
! Estimated noise=1.01313 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000951763 Jy
! Component: 100  -  total flux cleaned = -0.000903616 Jy
! Component: 150  -  total flux cleaned = -0.000903103 Jy
! Component: 200  -  total flux cleaned = -0.000936673 Jy
! Total flux subtracted in 200 components = -0.000936673 Jy
! Clean residual min=-0.000541 max=0.000546 Jy/beam
! Clean residual mean=0.000002 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.0265311 Jy
! Performing phase self-cal
! Adding 94 model components to the UV plane model.
! The established model now contains 202 components and 0.0265311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010609Jy  sigma=0.497616
! Fit after  self-cal, rms=0.010608Jy  sigma=0.497320
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010608Jy  sigma=0.497320
! Fit after  self-cal, rms=0.010637Jy  sigma=0.493806
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.995 mas, bmaj=16.25 mas, bpa=7.901 degrees
! Estimated noise=1.01532 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000407594 Jy
! Component: 100  -  total flux cleaned = -0.00030777 Jy
! Component: 150  -  total flux cleaned = -0.000304319 Jy
! Component: 200  -  total flux cleaned = -0.000381713 Jy
! Total flux subtracted in 200 components = -0.000381713 Jy
! Clean residual min=-0.000412 max=0.000407 Jy/beam
! Clean residual mean=0.000003 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0261494 Jy
selfcal
! Performing phase self-cal
! Adding 102 model components to the UV plane model.
! The established model now contains 294 components and 0.0261494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010347Jy  sigma=0.486802
! Fit after  self-cal, rms=0.010347Jy  sigma=0.486682
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149807 Jy
! Component: 100  -  total flux cleaned = 0.000105158 Jy
! Component: 150  -  total flux cleaned = 0.000166173 Jy
! Component: 200  -  total flux cleaned = 0.000224832 Jy
! Total flux subtracted in 200 components = 0.000224832 Jy
! Clean residual min=-0.000319 max=0.000320 Jy/beam
! Clean residual mean=0.000003 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0263742 Jy
! Performing phase self-cal
! Adding 93 model components to the UV plane model.
! The established model now contains 371 components and 0.0263742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010215Jy  sigma=0.483711
! Fit after  self-cal, rms=0.010215Jy  sigma=0.483630
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010215Jy  sigma=0.483630
! Fit after  self-cal, rms=0.009717Jy  sigma=0.465649
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.974 mas, bmaj=16.34 mas, bpa=8.019 degrees
! Estimated noise=0.999685 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000255454 Jy
! Component: 100  -  total flux cleaned = 0.000455769 Jy
! Component: 150  -  total flux cleaned = 0.000547471 Jy
! Component: 200  -  total flux cleaned = 0.000606318 Jy
! Total flux subtracted in 200 components = 0.000606318 Jy
! Clean residual min=-0.000238 max=0.000241 Jy/beam
! Clean residual mean=0.000003 rms=0.000093 Jy/beam
! Combined flux in latest and established models = 0.0269805 Jy
selfcal
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 431 components and 0.0269805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009670Jy  sigma=0.462261
! Fit after  self-cal, rms=0.009676Jy  sigma=0.462153
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185305 Jy
! Component: 100  -  total flux cleaned = 0.000320336 Jy
! Component: 150  -  total flux cleaned = 0.000412949 Jy
! Component: 200  -  total flux cleaned = 0.000514701 Jy
! Total flux subtracted in 200 components = 0.000514701 Jy
! Clean residual min=-0.000186 max=0.000187 Jy/beam
! Clean residual mean=0.000002 rms=0.000076 Jy/beam
! Combined flux in latest and established models = 0.0274952 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 505 components and 0.0274952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009648Jy  sigma=0.460455
! Fit after  self-cal, rms=0.009647Jy  sigma=0.460382
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009647Jy  sigma=0.460382
! Fit after  self-cal, rms=0.009600Jy  sigma=0.459647
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.172 mas, bmaj=16.28 mas, bpa=8.363 degrees
! Estimated noise=0.992983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00010182 Jy
! Component: 100  -  total flux cleaned = 0.000253922 Jy
! Component: 150  -  total flux cleaned = 0.000325961 Jy
! Component: 200  -  total flux cleaned = 0.00037349 Jy
! Total flux subtracted in 200 components = 0.00037349 Jy
! Clean residual min=-0.000196 max=0.000198 Jy/beam
! Clean residual mean=0.000003 rms=0.000078 Jy/beam
! Combined flux in latest and established models = 0.0278687 Jy
selfcal
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 566 components and 0.0278687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009575Jy  sigma=0.457675
! Fit after  self-cal, rms=0.009578Jy  sigma=0.457624
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.492e-05 Jy
! Component: 100  -  total flux cleaned = 0.000145469 Jy
! Component: 150  -  total flux cleaned = 0.000233129 Jy
! Component: 200  -  total flux cleaned = 0.000309728 Jy
! Total flux subtracted in 200 components = 0.000309728 Jy
! Clean residual min=-0.000159 max=0.000158 Jy/beam
! Clean residual mean=0.000002 rms=0.000065 Jy/beam
! Combined flux in latest and established models = 0.0281785 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 619 components and 0.0281785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009556Jy  sigma=0.456525
! Fit after  self-cal, rms=0.009555Jy  sigma=0.456483
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.962 mas, bmaj=16.39 mas, bpa=8.098 degrees
! Estimated noise=0.993378 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.962 x 16.39 at 8.098 degrees (North through East)
! Clean map  min=-0.0020738  max=0.023211 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.603 mas, bmaj=16.09 mas, bpa=0.9555 degrees
! Estimated noise=1.13417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0193096 Jy
! Component: 100  -  total flux cleaned = 0.022843 Jy
! Component: 150  -  total flux cleaned = 0.0241075 Jy
! Component: 200  -  total flux cleaned = 0.0255481 Jy
! Total flux subtracted in 200 components = 0.0255481 Jy
! Clean residual min=-0.001644 max=0.001645 Jy/beam
! Clean residual mean=-0.000000 rms=0.000781 Jy/beam
! Combined flux in latest and established models = 0.0255481 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 78 model components to the UV plane model.
! The established model now contains 78 components and 0.0255481 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.962 mas, bmaj=16.39 mas, bpa=8.098 degrees
! Estimated noise=0.993378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000796571 Jy
! Component: 100  -  total flux cleaned = -0.00110965 Jy
! Component: 150  -  total flux cleaned = -0.00117948 Jy
! Component: 200  -  total flux cleaned = -0.00090797 Jy
! Total flux subtracted in 200 components = -0.00090797 Jy
! Clean residual min=-0.000706 max=0.000709 Jy/beam
! Clean residual mean=0.000003 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.0246402 Jy
! Adding 98 model components to the UV plane model.
! The established model now contains 172 components and 0.0246402 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.172 mas, bmaj=16.28 mas, bpa=8.363 degrees
! Estimated noise=0.992983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.20149e-05 Jy
! Component: 100  -  total flux cleaned = 0.000255191 Jy
! Component: 150  -  total flux cleaned = 0.000224058 Jy
! Component: 200  -  total flux cleaned = 0.000195696 Jy
! Total flux subtracted in 200 components = 0.000195696 Jy
! Clean residual min=-0.000448 max=0.000446 Jy/beam
! Clean residual mean=0.000004 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.0248359 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.63753e-05 Jy
! Component: 100  -  total flux cleaned = -1.20725e-06 Jy
! Component: 150  -  total flux cleaned = 4.68242e-05 Jy
! Component: 200  -  total flux cleaned = 0.000117832 Jy
! Total flux subtracted in 200 components = 0.000117832 Jy
! Clean residual min=-0.000392 max=0.000392 Jy/beam
! Clean residual mean=0.000005 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.0249537 Jy
! Adding 162 model components to the UV plane model.
! The established model now contains 331 components and 0.0249537 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.962 mas, bmaj=16.39 mas, bpa=8.098 degrees
! Estimated noise=0.993378 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000226393 Jy
! Component: 100  -  total flux cleaned = 0.000396665 Jy
! Component: 150  -  total flux cleaned = 0.000564946 Jy
! Component: 200  -  total flux cleaned = 0.000722075 Jy
! Total flux subtracted in 200 components = 0.000722075 Jy
! Clean residual min=-0.000229 max=0.000231 Jy/beam
! Clean residual mean=0.000004 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.0256758 Jy
selfcal
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 400 components and 0.0256758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009675Jy  sigma=0.460580
! Fit after  self-cal, rms=0.009681Jy  sigma=0.460413
wmodel /d2/scr/pima/bp177i_uvs/J0755+5509_C_map.mod
! Writing 400 model components to file: /d2/scr/pima/bp177i_uvs/J0755+5509_C_map.mod
wobs /d2/scr/pima/bp177i_uvs/J0755+5509_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177i_uvs/J0755+5509_C_uvs.fits
wwins /d2/scr/pima/bp177i_uvs/J0755+5509_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177i_uvs/J0755+5509_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.962 x 16.39 at 8.098 degrees (North through East)
! Clean map  min=-0.0029203  max=0.022303 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177i_uvs/J0755+5509_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0223032 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.78349e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.31598 1.31598 2.63195 5.2639 10.5278 21.0556 42.1112 84.2224
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.022 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  227.967 
quit
! Quitting program
! Log file /d2/scr/pima/bp177i_uvs/J0755+5509_C_uvs.log closed on Tue Apr 15 00:17:47 2014