! Started logfile: /d2/scr/pima/bp177i_uvs/J0741-4454_C_uvs.log on Tue Apr 15 00:16:06 2014
obs /d2/scr/pima/bp177i_uvs/J0741-4454_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177i_uvs/J0741-4454_C_uva.fits
! AN table 1: 6 integrations on 10 of 10 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0741-4454
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 480 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177i_uvs/J0741-4454_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.009182Jy  sigma=25.995198
! Fit after  self-cal, rms=0.866512Jy  sigma=22.477908
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.379 mas, bmaj=73.16 mas, bpa=-0.413 degrees
! Estimated noise=1.66729 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101974 Jy
! Component: 100  -  total flux cleaned = 0.124795 Jy
! Total flux subtracted in 100 components = 0.124795 Jy
! Clean residual min=-0.007694 max=0.007997 Jy/beam
! Clean residual mean=-0.000237 rms=0.002882 Jy/beam
! Combined flux in latest and established models = 0.124795 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.124795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032972Jy  sigma=0.678003
! Fit after  self-cal, rms=0.032955Jy  sigma=0.677413
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.26 mas, bmaj=69.54 mas, bpa=-0.2799 degrees
! Estimated noise=1.27183 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00336907 Jy
! Component: 100  -  total flux cleaned = 0.00392929 Jy
! Component: 150  -  total flux cleaned = 0.00348656 Jy
! Component: 200  -  total flux cleaned = 0.00309444 Jy
! Total flux subtracted in 200 components = 0.00309444 Jy
! Clean residual min=-0.002042 max=0.002029 Jy/beam
! Clean residual mean=-0.000113 rms=0.000976 Jy/beam
! Combined flux in latest and established models = 0.127889 Jy
! Performing phase self-cal
! Adding 137 model components to the UV plane model.
! The established model now contains 158 components and 0.127889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029774Jy  sigma=0.623157
! Fit after  self-cal, rms=0.029761Jy  sigma=0.623018
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.26 x 69.54 at -0.2799 degrees (North through East)
! Clean map  min=-0.0041446  max=0.13055 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        0.92     LA        0.97     OV        1.07     
!   PT        0.88     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     KP        0.97     LA        1.04     OV        1.10     
!   PT        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        1.07     LA        1.03     OV        1.05     
!   PT        0.91     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        1.00     LA        1.06     OV        1.03     
!   PT        1.09     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        0.97     LA        1.01     OV        1.02     
!   PT        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        1.04     LA        1.01     OV        1.08     
!   PT        0.96     
! 
! 
! Fit before self-cal, rms=0.029761Jy  sigma=0.623018
! Fit after  self-cal, rms=0.028499Jy  sigma=0.574066
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.336 mas, bmaj=69.48 mas, bpa=-0.2559 degrees
! Estimated noise=1.28266 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114647 Jy
! Component: 100  -  total flux cleaned = 0.000526919 Jy
! Component: 150  -  total flux cleaned = 0.000284024 Jy
! Component: 200  -  total flux cleaned = 0.0007969 Jy
! Total flux subtracted in 200 components = 0.0007969 Jy
! Clean residual min=-0.001010 max=0.001017 Jy/beam
! Clean residual mean=-0.000046 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.128686 Jy
! Performing phase self-cal
! Adding 124 model components to the UV plane model.
! The established model now contains 281 components and 0.128686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027598Jy  sigma=0.567158
! Fit after  self-cal, rms=0.027598Jy  sigma=0.567054
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027598Jy  sigma=0.567054
! Fit after  self-cal, rms=0.027687Jy  sigma=0.564605
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.353 mas, bmaj=69.35 mas, bpa=-0.2503 degrees
! Estimated noise=1.29465 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00052475 Jy
! Component: 100  -  total flux cleaned = 0.000319567 Jy
! Component: 150  -  total flux cleaned = 8.80921e-05 Jy
! Component: 200  -  total flux cleaned = 2.88496e-05 Jy
! Total flux subtracted in 200 components = 2.88496e-05 Jy
! Clean residual min=-0.000875 max=0.000876 Jy/beam
! Clean residual mean=-0.000042 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.128715 Jy
selfcal
! Performing phase self-cal
! Adding 124 model components to the UV plane model.
! The established model now contains 383 components and 0.128715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027103Jy  sigma=0.561002
! Fit after  self-cal, rms=0.027101Jy  sigma=0.560981
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000305974 Jy
! Component: 100  -  total flux cleaned = -0.000860912 Jy
! Component: 150  -  total flux cleaned = -0.00146707 Jy
! Component: 200  -  total flux cleaned = -0.00211948 Jy
! Total flux subtracted in 200 components = -0.00211948 Jy
! Clean residual min=-0.000659 max=0.000656 Jy/beam
! Clean residual mean=-0.000040 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.126596 Jy
! Performing phase self-cal
! Adding 118 model components to the UV plane model.
! The established model now contains 479 components and 0.126596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026873Jy  sigma=0.559115
! Fit after  self-cal, rms=0.026872Jy  sigma=0.559090
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026872Jy  sigma=0.559090
! Fit after  self-cal, rms=0.026953Jy  sigma=0.556794
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.371 mas, bmaj=69.2 mas, bpa=-0.2428 degrees
! Estimated noise=1.30459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000138845 Jy
! Component: 100  -  total flux cleaned = -0.000300051 Jy
! Component: 150  -  total flux cleaned = -0.000441114 Jy
! Component: 200  -  total flux cleaned = -0.00035726 Jy
! Total flux subtracted in 200 components = -0.00035726 Jy
! Clean residual min=-0.000673 max=0.000672 Jy/beam
! Clean residual mean=-0.000032 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.126238 Jy
selfcal
! Performing phase self-cal
! Adding 126 model components to the UV plane model.
! The established model now contains 586 components and 0.126238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026568Jy  sigma=0.555122
! Fit after  self-cal, rms=0.026569Jy  sigma=0.555103
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000107857 Jy
! Component: 100  -  total flux cleaned = -0.000570202 Jy
! Component: 150  -  total flux cleaned = -0.00114091 Jy
! Component: 200  -  total flux cleaned = -0.00161834 Jy
! Total flux subtracted in 200 components = -0.00161834 Jy
! Clean residual min=-0.000516 max=0.000514 Jy/beam
! Clean residual mean=-0.000032 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.12462 Jy
! Performing phase self-cal
! Adding 119 model components to the UV plane model.
! The established model now contains 687 components and 0.12462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026426Jy  sigma=0.554012
! Fit after  self-cal, rms=0.026427Jy  sigma=0.553996
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026427Jy  sigma=0.553996
! Fit after  self-cal, rms=0.026505Jy  sigma=0.552557
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.696 mas, bmaj=68.26 mas, bpa=-0.2802 degrees
! Estimated noise=1.30766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.58857e-05 Jy
! Component: 100  -  total flux cleaned = -0.00041716 Jy
! Component: 150  -  total flux cleaned = -0.000569148 Jy
! Component: 200  -  total flux cleaned = -0.000637474 Jy
! Total flux subtracted in 200 components = -0.000637474 Jy
! Clean residual min=-0.000540 max=0.000540 Jy/beam
! Clean residual mean=-0.000026 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.123983 Jy
selfcal
! Performing phase self-cal
! Adding 126 model components to the UV plane model.
! The established model now contains 788 components and 0.123983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026242Jy  sigma=0.551748
! Fit after  self-cal, rms=0.026243Jy  sigma=0.551733
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.11691e-06 Jy
! Component: 100  -  total flux cleaned = -0.000191165 Jy
! Component: 150  -  total flux cleaned = -0.000562687 Jy
! Component: 200  -  total flux cleaned = -0.000940503 Jy
! Total flux subtracted in 200 components = -0.000940503 Jy
! Clean residual min=-0.000412 max=0.000408 Jy/beam
! Clean residual mean=-0.000026 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.123042 Jy
! Performing phase self-cal
! Adding 147 model components to the UV plane model.
! The established model now contains 920 components and 0.123042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026147Jy  sigma=0.551138
! Fit after  self-cal, rms=0.026148Jy  sigma=0.551124
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.384 mas, bmaj=69.06 mas, bpa=-0.2331 degrees
! Estimated noise=1.31184 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.384 x 69.06 at -0.2331 degrees (North through East)
! Clean map  min=-0.0061162  max=0.13649 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.488 mas, bmaj=72.7 mas, bpa=-0.4183 degrees
! Estimated noise=1.73587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106157 Jy
! Component: 100  -  total flux cleaned = 0.129602 Jy
! Component: 150  -  total flux cleaned = 0.133805 Jy
! Component: 200  -  total flux cleaned = 0.133392 Jy
! Total flux subtracted in 200 components = 0.133392 Jy
! Clean residual min=-0.003156 max=0.003147 Jy/beam
! Clean residual mean=-0.000117 rms=0.001458 Jy/beam
! Combined flux in latest and established models = 0.133392 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 98 model components to the UV plane model.
! The established model now contains 98 components and 0.133392 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.384 mas, bmaj=69.06 mas, bpa=-0.2331 degrees
! Estimated noise=1.31184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196707 Jy
! Component: 100  -  total flux cleaned = 0.00197684 Jy
! Component: 150  -  total flux cleaned = 0.00184822 Jy
! Component: 200  -  total flux cleaned = 0.00174333 Jy
! Total flux subtracted in 200 components = 0.00174333 Jy
! Clean residual min=-0.001556 max=0.001549 Jy/beam
! Clean residual mean=-0.000060 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.135136 Jy
! Adding 89 model components to the UV plane model.
! The established model now contains 182 components and 0.135135 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.696 mas, bmaj=68.26 mas, bpa=-0.2802 degrees
! Estimated noise=1.30766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000530823 Jy
! Component: 100  -  total flux cleaned = -0.000778975 Jy
! Component: 150  -  total flux cleaned = -0.000494389 Jy
! Component: 200  -  total flux cleaned = 3.87528e-05 Jy
! Total flux subtracted in 200 components = 3.87528e-05 Jy
! Clean residual min=-0.001088 max=0.001090 Jy/beam
! Clean residual mean=-0.000048 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.135174 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000379189 Jy
! Component: 100  -  total flux cleaned = 0.00128397 Jy
! Component: 150  -  total flux cleaned = 0.00192561 Jy
! Component: 200  -  total flux cleaned = 0.00240047 Jy
! Total flux subtracted in 200 components = 0.00240047 Jy
! Clean residual min=-0.000992 max=0.001003 Jy/beam
! Clean residual mean=-0.000033 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.137575 Jy
! Adding 164 model components to the UV plane model.
! The established model now contains 336 components and 0.137575 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.384 mas, bmaj=69.06 mas, bpa=-0.2331 degrees
! Estimated noise=1.31184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000368373 Jy
! Component: 100  -  total flux cleaned = -0.000855863 Jy
! Component: 150  -  total flux cleaned = -0.00101699 Jy
! Component: 200  -  total flux cleaned = -0.00112704 Jy
! Total flux subtracted in 200 components = -0.00112704 Jy
! Clean residual min=-0.000601 max=0.000606 Jy/beam
! Clean residual mean=-0.000034 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.136448 Jy
selfcal
! Performing phase self-cal
! Adding 135 model components to the UV plane model.
! The established model now contains 457 components and 0.136448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026371Jy  sigma=0.553841
! Fit after  self-cal, rms=0.026372Jy  sigma=0.553803
wmodel /d2/scr/pima/bp177i_uvs/J0741-4454_C_map.mod
! Writing 457 model components to file: /d2/scr/pima/bp177i_uvs/J0741-4454_C_map.mod
wobs /d2/scr/pima/bp177i_uvs/J0741-4454_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177i_uvs/J0741-4454_C_uvs.fits
wwins /d2/scr/pima/bp177i_uvs/J0741-4454_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177i_uvs/J0741-4454_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.384 x 69.06 at -0.2331 degrees (North through East)
! Clean map  min=-0.0052211  max=0.13482 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177i_uvs/J0741-4454_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.134824 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000334731 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.744815 0.744815 1.48963 2.97926 5.95852 11.917 23.8341 47.6682 95.3364
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.134 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  402.784 
quit
! Quitting program
! Log file /d2/scr/pima/bp177i_uvs/J0741-4454_C_uvs.log closed on Tue Apr 15 00:16:20 2014