! Started logfile: /d2/scr/pima/bp177i_uvs/J0653-4151_C_uvs.log on Tue Apr 15 00:13:41 2014
obs /d2/scr/pima/bp177i_uvs/J0653-4151_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177i_uvs/J0653-4151_C_uva.fits
! AN table 1: 6 integrations on 10 of 10 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0653-4151
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 480 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177i_uvs/J0653-4151_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.999378Jy  sigma=27.941000
! Fit after  self-cal, rms=0.954534Jy  sigma=26.731826
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.632 mas, bmaj=62.08 mas, bpa=8.555 degrees
! Estimated noise=1.53776 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0362973 Jy
! Component: 100  -  total flux cleaned = 0.0441466 Jy
! Total flux subtracted in 100 components = 0.0441466 Jy
! Clean residual min=-0.002867 max=0.002871 Jy/beam
! Clean residual mean=-0.000091 rms=0.001275 Jy/beam
! Combined flux in latest and established models = 0.0441466 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.0441466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021601Jy  sigma=0.554976
! Fit after  self-cal, rms=0.021207Jy  sigma=0.545745
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.839 mas, bmaj=59.04 mas, bpa=8.423 degrees
! Estimated noise=1.16741 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000582466 Jy
! Component: 100  -  total flux cleaned = -0.000181988 Jy
! Component: 150  -  total flux cleaned = -0.000989641 Jy
! Component: 200  -  total flux cleaned = -0.00160693 Jy
! Total flux subtracted in 200 components = -0.00160693 Jy
! Clean residual min=-0.000871 max=0.000875 Jy/beam
! Clean residual mean=-0.000028 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.0425397 Jy
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 111 components and 0.0425397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020560Jy  sigma=0.531322
! Fit after  self-cal, rms=0.020550Jy  sigma=0.531024
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.839 x 59.04 at 8.423 degrees (North through East)
! Clean map  min=-0.0020049  max=0.039942 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        0.90     LA        1.00     OV        0.96     
!   PT        0.86     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        0.93     LA        1.00     OV        1.05     
!   PT        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.16     KP        1.13     LA        1.07     OV        0.94     
!   PT        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.16     KP        0.91     LA        0.95     OV        1.03     
!   PT        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        1.13     LA        1.04     OV        1.04     
!   PT        1.06     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     KP        1.09     LA        1.00     OV        0.97     
!   PT        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        1.04     LA        1.02     OV        1.07     
!   PT        0.91     
! 
! 
! Fit before self-cal, rms=0.020550Jy  sigma=0.531024
! Fit after  self-cal, rms=0.020086Jy  sigma=0.515211
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.857 mas, bmaj=59.16 mas, bpa=8.433 degrees
! Estimated noise=1.16956 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000459741 Jy
! Component: 100  -  total flux cleaned = -0.000829266 Jy
! Component: 150  -  total flux cleaned = -0.00070915 Jy
! Component: 200  -  total flux cleaned = -0.000737295 Jy
! Total flux subtracted in 200 components = -0.000737295 Jy
! Clean residual min=-0.000413 max=0.000412 Jy/beam
! Clean residual mean=-0.000016 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.0418024 Jy
! Performing phase self-cal
! Adding 102 model components to the UV plane model.
! The established model now contains 212 components and 0.0418024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019933Jy  sigma=0.512512
! Fit after  self-cal, rms=0.019938Jy  sigma=0.512266
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019938Jy  sigma=0.512266
! Fit after  self-cal, rms=0.020033Jy  sigma=0.511729
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.852 mas, bmaj=59.12 mas, bpa=8.436 degrees
! Estimated noise=1.177 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000290772 Jy
! Component: 100  -  total flux cleaned = -0.00026448 Jy
! Component: 150  -  total flux cleaned = -0.000376496 Jy
! Component: 200  -  total flux cleaned = -0.000335939 Jy
! Total flux subtracted in 200 components = -0.000335939 Jy
! Clean residual min=-0.000304 max=0.000303 Jy/beam
! Clean residual mean=-0.000011 rms=0.000148 Jy/beam
! Combined flux in latest and established models = 0.0414664 Jy
selfcal
! Performing phase self-cal
! Adding 101 model components to the UV plane model.
! The established model now contains 310 components and 0.0414665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019933Jy  sigma=0.510421
! Fit after  self-cal, rms=0.019930Jy  sigma=0.510399
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.25805e-05 Jy
! Component: 100  -  total flux cleaned = -0.000165178 Jy
! Component: 150  -  total flux cleaned = -0.000337639 Jy
! Component: 200  -  total flux cleaned = -0.000533626 Jy
! Total flux subtracted in 200 components = -0.000533626 Jy
! Clean residual min=-0.000248 max=0.000245 Jy/beam
! Clean residual mean=-0.000005 rms=0.000118 Jy/beam
! Combined flux in latest and established models = 0.0409328 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 384 components and 0.0409328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019899Jy  sigma=0.509887
! Fit after  self-cal, rms=0.019898Jy  sigma=0.509869
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019898Jy  sigma=0.509869
! Fit after  self-cal, rms=0.020033Jy  sigma=0.509196
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.835 mas, bmaj=59.1 mas, bpa=8.46 degrees
! Estimated noise=1.18653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000292812 Jy
! Component: 100  -  total flux cleaned = -0.00016371 Jy
! Component: 150  -  total flux cleaned = -0.000178103 Jy
! Component: 200  -  total flux cleaned = -0.000271425 Jy
! Total flux subtracted in 200 components = -0.000271425 Jy
! Clean residual min=-0.000241 max=0.000240 Jy/beam
! Clean residual mean=-0.000006 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.0406614 Jy
selfcal
! Performing phase self-cal
! Adding 111 model components to the UV plane model.
! The established model now contains 488 components and 0.0406614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019958Jy  sigma=0.508404
! Fit after  self-cal, rms=0.019956Jy  sigma=0.508396
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.31263e-05 Jy
! Component: 100  -  total flux cleaned = -0.000154418 Jy
! Component: 150  -  total flux cleaned = -0.000289164 Jy
! Component: 200  -  total flux cleaned = -0.000384594 Jy
! Total flux subtracted in 200 components = -0.000384594 Jy
! Clean residual min=-0.000196 max=0.000197 Jy/beam
! Clean residual mean=-0.000003 rms=0.000092 Jy/beam
! Combined flux in latest and established models = 0.0402768 Jy
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 558 components and 0.0402768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019936Jy  sigma=0.508106
! Fit after  self-cal, rms=0.019934Jy  sigma=0.508094
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019934Jy  sigma=0.508094
! Fit after  self-cal, rms=0.020081Jy  sigma=0.507482
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.155 mas, bmaj=58.21 mas, bpa=8.426 degrees
! Estimated noise=1.19786 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000197177 Jy
! Component: 100  -  total flux cleaned = -0.00024151 Jy
! Component: 150  -  total flux cleaned = -0.000284788 Jy
! Component: 200  -  total flux cleaned = -0.00032368 Jy
! Total flux subtracted in 200 components = -0.00032368 Jy
! Clean residual min=-0.000204 max=0.000204 Jy/beam
! Clean residual mean=-0.000005 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.0399531 Jy
selfcal
! Performing phase self-cal
! Adding 114 model components to the UV plane model.
! The established model now contains 648 components and 0.0399531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020020Jy  sigma=0.506890
! Fit after  self-cal, rms=0.020018Jy  sigma=0.506884
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.66079e-05 Jy
! Component: 100  -  total flux cleaned = -9.15733e-05 Jy
! Component: 150  -  total flux cleaned = -0.000183709 Jy
! Component: 200  -  total flux cleaned = -0.00027369 Jy
! Total flux subtracted in 200 components = -0.00027369 Jy
! Clean residual min=-0.000164 max=0.000165 Jy/beam
! Clean residual mean=-0.000004 rms=0.000079 Jy/beam
! Combined flux in latest and established models = 0.0396794 Jy
! Performing phase self-cal
! Adding 89 model components to the UV plane model.
! The established model now contains 728 components and 0.0396794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020003Jy  sigma=0.506683
! Fit after  self-cal, rms=0.020001Jy  sigma=0.506672
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.816 mas, bmaj=59.08 mas, bpa=8.483 degrees
! Estimated noise=1.19599 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.816 x 59.08 at 8.483 degrees (North through East)
! Clean map  min=-0.0026225  max=0.039661 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.581 mas, bmaj=62.37 mas, bpa=8.577 degrees
! Estimated noise=1.56469 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0370163 Jy
! Component: 100  -  total flux cleaned = 0.0430033 Jy
! Component: 150  -  total flux cleaned = 0.0423224 Jy
! Component: 200  -  total flux cleaned = 0.0419844 Jy
! Total flux subtracted in 200 components = 0.0419844 Jy
! Clean residual min=-0.001452 max=0.001470 Jy/beam
! Clean residual mean=-0.000032 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.0419844 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 85 model components to the UV plane model.
! The established model now contains 85 components and 0.0419844 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.816 mas, bmaj=59.08 mas, bpa=8.483 degrees
! Estimated noise=1.19599 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000667943 Jy
! Component: 100  -  total flux cleaned = 0.000467489 Jy
! Component: 150  -  total flux cleaned = 0.000229343 Jy
! Component: 200  -  total flux cleaned = 0.000227454 Jy
! Total flux subtracted in 200 components = 0.000227454 Jy
! Clean residual min=-0.000611 max=0.000615 Jy/beam
! Clean residual mean=-0.000009 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.0422118 Jy
! Adding 92 model components to the UV plane model.
! The established model now contains 177 components and 0.0422118 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.155 mas, bmaj=58.21 mas, bpa=8.426 degrees
! Estimated noise=1.19786 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000145459 Jy
! Component: 100  -  total flux cleaned = 0.000205738 Jy
! Component: 150  -  total flux cleaned = 0.000123486 Jy
! Component: 200  -  total flux cleaned = -4.4089e-06 Jy
! Total flux subtracted in 200 components = -4.4089e-06 Jy
! Clean residual min=-0.000421 max=0.000421 Jy/beam
! Clean residual mean=-0.000002 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.0422074 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.42897e-05 Jy
! Component: 100  -  total flux cleaned = -0.000292423 Jy
! Component: 150  -  total flux cleaned = -0.000411293 Jy
! Component: 200  -  total flux cleaned = -0.000552059 Jy
! Total flux subtracted in 200 components = -0.000552059 Jy
! Clean residual min=-0.000388 max=0.000389 Jy/beam
! Clean residual mean=0.000002 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.0416553 Jy
! Adding 144 model components to the UV plane model.
! The established model now contains 320 components and 0.0416553 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.816 mas, bmaj=59.08 mas, bpa=8.483 degrees
! Estimated noise=1.19599 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000192966 Jy
! Component: 100  -  total flux cleaned = -0.000372484 Jy
! Component: 150  -  total flux cleaned = -0.000553478 Jy
! Component: 200  -  total flux cleaned = -0.000706318 Jy
! Total flux subtracted in 200 components = -0.000706318 Jy
! Clean residual min=-0.000278 max=0.000277 Jy/beam
! Clean residual mean=-0.000005 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.040949 Jy
selfcal
! Performing phase self-cal
! Adding 96 model components to the UV plane model.
! The established model now contains 411 components and 0.040949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020034Jy  sigma=0.507341
! Fit after  self-cal, rms=0.020033Jy  sigma=0.507311
wmodel /d2/scr/pima/bp177i_uvs/J0653-4151_C_map.mod
! Writing 411 model components to file: /d2/scr/pima/bp177i_uvs/J0653-4151_C_map.mod
wobs /d2/scr/pima/bp177i_uvs/J0653-4151_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177i_uvs/J0653-4151_C_uvs.fits
wwins /d2/scr/pima/bp177i_uvs/J0653-4151_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177i_uvs/J0653-4151_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.816 x 59.08 at 8.483 degrees (North through East)
! Clean map  min=-0.0022731  max=0.042483 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177i_uvs/J0653-4151_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.042483 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00012086 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.853469 0.853469 1.70694 3.41387 6.82775 13.6555 27.311 54.622
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.042 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  351.506 
quit
! Quitting program
! Log file /d2/scr/pima/bp177i_uvs/J0653-4151_C_uvs.log closed on Tue Apr 15 00:13:51 2014