! Started logfile: /d2/scr/pima/bp177h_uvs/J1757-2241_C_uvs.log on Sun Mar 30 00:53:53 2014
obs /d2/scr/pima/bp177h_uvs/J1757-2241_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177h_uvs/J1757-2241_C_uva.fits
! AN table 1: 6 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J1757-2241
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 432 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177h_uvs/J1757-2241_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.000227Jy  sigma=33.214900
! Fit after  self-cal, rms=0.979813Jy  sigma=32.519127
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.52 mas, bmaj=26.76 mas, bpa=-13.73 degrees
! Estimated noise=1.13496 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0168119 Jy
! Component: 100  -  total flux cleaned = 0.0227611 Jy
! Total flux subtracted in 100 components = 0.0227611 Jy
! Clean residual min=-0.002568 max=0.002664 Jy/beam
! Clean residual mean=-0.000008 rms=0.001226 Jy/beam
! Combined flux in latest and established models = 0.0227611 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 47 components and 0.0227611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019861Jy  sigma=0.618179
! Fit after  self-cal, rms=0.017432Jy  sigma=0.532738
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.75 mas, bmaj=29.94 mas, bpa=-13.09 degrees
! Estimated noise=1.04341 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00307999 Jy
! Component: 100  -  total flux cleaned = 0.00356003 Jy
! Component: 150  -  total flux cleaned = 0.00311411 Jy
! Component: 200  -  total flux cleaned = 0.00317195 Jy
! Total flux subtracted in 200 components = 0.00317195 Jy
! Clean residual min=-0.000847 max=0.000861 Jy/beam
! Clean residual mean=0.000003 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.025933 Jy
! Performing phase self-cal
! Adding 87 model components to the UV plane model.
! The established model now contains 133 components and 0.025933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016034Jy  sigma=0.487317
! Fit after  self-cal, rms=0.015980Jy  sigma=0.485590
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.75 x 29.94 at -13.09 degrees (North through East)
! Clean map  min=-0.0020125  max=0.018501 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     KP        0.84     LA        0.94     OV        1.10     
!   PT        0.86     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        0.99     LA        1.03     OV        0.91     
!   PT        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        1.07     LA        1.01     OV        0.99     
!   PT        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        1.11     LA        0.89     OV        0.91     
!   PT        0.94     
! 
! 
! Fit before self-cal, rms=0.015980Jy  sigma=0.485590
! Fit after  self-cal, rms=0.015280Jy  sigma=0.480206
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.76 mas, bmaj=29.99 mas, bpa=-13.11 degrees
! Estimated noise=1.00473 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000297271 Jy
! Component: 100  -  total flux cleaned = 0.000228879 Jy
! Component: 150  -  total flux cleaned = 0.00013693 Jy
! Component: 200  -  total flux cleaned = 7.99395e-05 Jy
! Total flux subtracted in 200 components = 7.99395e-05 Jy
! Clean residual min=-0.000471 max=0.000470 Jy/beam
! Clean residual mean=0.000007 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.026013 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 199 components and 0.026013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015148Jy  sigma=0.476275
! Fit after  self-cal, rms=0.015140Jy  sigma=0.475709
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015140Jy  sigma=0.475709
! Fit after  self-cal, rms=0.015221Jy  sigma=0.475331
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.81 mas, bmaj=29.99 mas, bpa=-13.32 degrees
! Estimated noise=1.00252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.90785e-05 Jy
! Component: 100  -  total flux cleaned = -1.5623e-05 Jy
! Component: 150  -  total flux cleaned = 4.83132e-05 Jy
! Component: 200  -  total flux cleaned = 6.83296e-05 Jy
! Total flux subtracted in 200 components = 6.83296e-05 Jy
! Clean residual min=-0.000317 max=0.000316 Jy/beam
! Clean residual mean=0.000004 rms=0.000129 Jy/beam
! Combined flux in latest and established models = 0.0260813 Jy
selfcal
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 282 components and 0.0260813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015154Jy  sigma=0.473664
! Fit after  self-cal, rms=0.015153Jy  sigma=0.473445
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.43755e-05 Jy
! Component: 100  -  total flux cleaned = -5.33901e-08 Jy
! Component: 150  -  total flux cleaned = -7.81604e-05 Jy
! Component: 200  -  total flux cleaned = -0.000152466 Jy
! Total flux subtracted in 200 components = -0.000152466 Jy
! Clean residual min=-0.000246 max=0.000245 Jy/beam
! Clean residual mean=0.000000 rms=0.000103 Jy/beam
! Combined flux in latest and established models = 0.0259288 Jy
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 364 components and 0.0259288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015120Jy  sigma=0.472517
! Fit after  self-cal, rms=0.015120Jy  sigma=0.472447
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015120Jy  sigma=0.472447
! Fit after  self-cal, rms=0.015140Jy  sigma=0.472271
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.82 mas, bmaj=30.01 mas, bpa=-13.36 degrees
! Estimated noise=1.00302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100946 Jy
! Component: 100  -  total flux cleaned = -0.000145908 Jy
! Component: 150  -  total flux cleaned = -0.0001599 Jy
! Component: 200  -  total flux cleaned = -0.000159836 Jy
! Total flux subtracted in 200 components = -0.000159836 Jy
! Clean residual min=-0.000227 max=0.000230 Jy/beam
! Clean residual mean=0.000002 rms=0.000095 Jy/beam
! Combined flux in latest and established models = 0.025769 Jy
selfcal
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 429 components and 0.025769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015112Jy  sigma=0.471603
! Fit after  self-cal, rms=0.015111Jy  sigma=0.471565
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000148015 Jy
! Component: 100  -  total flux cleaned = -0.000195918 Jy
! Component: 150  -  total flux cleaned = -0.000218567 Jy
! Component: 200  -  total flux cleaned = -0.000185485 Jy
! Total flux subtracted in 200 components = -0.000185485 Jy
! Clean residual min=-0.000182 max=0.000184 Jy/beam
! Clean residual mean=-0.000000 rms=0.000080 Jy/beam
! Combined flux in latest and established models = 0.0255835 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 482 components and 0.0255835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015093Jy  sigma=0.471058
! Fit after  self-cal, rms=0.015093Jy  sigma=0.471036
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015093Jy  sigma=0.471036
! Fit after  self-cal, rms=0.015091Jy  sigma=0.470951
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.97 mas, bmaj=29.93 mas, bpa=-13.49 degrees
! Estimated noise=1.00163 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.69419e-05 Jy
! Component: 100  -  total flux cleaned = -0.000108828 Jy
! Component: 150  -  total flux cleaned = -0.000131488 Jy
! Component: 200  -  total flux cleaned = -9.89476e-05 Jy
! Total flux subtracted in 200 components = -9.89476e-05 Jy
! Clean residual min=-0.000182 max=0.000184 Jy/beam
! Clean residual mean=0.000002 rms=0.000076 Jy/beam
! Combined flux in latest and established models = 0.0254846 Jy
selfcal
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 519 components and 0.0254846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015074Jy  sigma=0.470547
! Fit after  self-cal, rms=0.015074Jy  sigma=0.470533
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.16146e-05 Jy
! Component: 100  -  total flux cleaned = -9.17053e-05 Jy
! Component: 150  -  total flux cleaned = -1.70347e-05 Jy
! Component: 200  -  total flux cleaned = 7.59435e-05 Jy
! Total flux subtracted in 200 components = 7.59435e-05 Jy
! Clean residual min=-0.000154 max=0.000153 Jy/beam
! Clean residual mean=-0.000000 rms=0.000068 Jy/beam
! Combined flux in latest and established models = 0.0255605 Jy
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 579 components and 0.0255605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015062Jy  sigma=0.470205
! Fit after  self-cal, rms=0.015063Jy  sigma=0.470193
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=12.83 mas, bmaj=30.02 mas, bpa=-13.39 degrees
! Estimated noise=1.00246 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.83 x 30.02 at -13.39 degrees (North through East)
! Clean map  min=-0.0020785  max=0.017926 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.65 mas, bmaj=26.89 mas, bpa=-14.3 degrees
! Estimated noise=1.084 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178192 Jy
! Component: 100  -  total flux cleaned = 0.0236347 Jy
! Component: 150  -  total flux cleaned = 0.0242082 Jy
! Component: 200  -  total flux cleaned = 0.023845 Jy
! Total flux subtracted in 200 components = 0.023845 Jy
! Clean residual min=-0.001144 max=0.001149 Jy/beam
! Clean residual mean=-0.000004 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.023845 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 100 model components to the UV plane model.
! The established model now contains 100 components and 0.023845 Jy
! Inverting map and beam 
! Estimated beam: bmin=12.83 mas, bmaj=30.02 mas, bpa=-13.39 degrees
! Estimated noise=1.00246 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000626573 Jy
! Component: 100  -  total flux cleaned = -0.00102073 Jy
! Component: 150  -  total flux cleaned = -0.00147616 Jy
! Component: 200  -  total flux cleaned = -0.00147683 Jy
! Total flux subtracted in 200 components = -0.00147683 Jy
! Clean residual min=-0.000632 max=0.000630 Jy/beam
! Clean residual mean=0.000008 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.0223682 Jy
! Adding 97 model components to the UV plane model.
! The established model now contains 197 components and 0.0223682 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.97 mas, bmaj=29.93 mas, bpa=-13.49 degrees
! Estimated noise=1.00163 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000344802 Jy
! Component: 100  -  total flux cleaned = -0.000291728 Jy
! Component: 150  -  total flux cleaned = -0.000244207 Jy
! Component: 200  -  total flux cleaned = -0.000177666 Jy
! Total flux subtracted in 200 components = -0.000177666 Jy
! Clean residual min=-0.000363 max=0.000364 Jy/beam
! Clean residual mean=0.000005 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.0221905 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.26137e-05 Jy
! Component: 100  -  total flux cleaned = -8.39809e-05 Jy
! Component: 150  -  total flux cleaned = -8.36065e-05 Jy
! Component: 200  -  total flux cleaned = -0.00010367 Jy
! Total flux subtracted in 200 components = -0.00010367 Jy
! Clean residual min=-0.000336 max=0.000337 Jy/beam
! Clean residual mean=0.000007 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.0220869 Jy
! Adding 168 model components to the UV plane model.
! The established model now contains 363 components and 0.0220869 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=12.83 mas, bmaj=30.02 mas, bpa=-13.39 degrees
! Estimated noise=1.00246 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.75371e-05 Jy
! Component: 100  -  total flux cleaned = -0.000121966 Jy
! Component: 150  -  total flux cleaned = -9.35978e-05 Jy
! Component: 200  -  total flux cleaned = -6.58585e-05 Jy
! Total flux subtracted in 200 components = -6.58585e-05 Jy
! Clean residual min=-0.000229 max=0.000228 Jy/beam
! Clean residual mean=0.000000 rms=0.000095 Jy/beam
! Combined flux in latest and established models = 0.022021 Jy
selfcal
! Performing phase self-cal
! Adding 89 model components to the UV plane model.
! The established model now contains 448 components and 0.022021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015103Jy  sigma=0.471444
! Fit after  self-cal, rms=0.015096Jy  sigma=0.470948
wmodel /d2/scr/pima/bp177h_uvs/J1757-2241_C_map.mod
! Writing 448 model components to file: /d2/scr/pima/bp177h_uvs/J1757-2241_C_map.mod
wobs /d2/scr/pima/bp177h_uvs/J1757-2241_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177h_uvs/J1757-2241_C_uvs.fits
wwins /d2/scr/pima/bp177h_uvs/J1757-2241_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177h_uvs/J1757-2241_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.83 x 30.02 at -13.39 degrees (North through East)
! Clean map  min=-0.0018206  max=0.013003 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177h_uvs/J1757-2241_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0130032 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.09642e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.09867 2.09867 4.19733 8.39466 16.7893 33.5786 67.1573
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.013 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  142.948 
quit
! Quitting program
! Log file /d2/scr/pima/bp177h_uvs/J1757-2241_C_uvs.log closed on Sun Mar 30 00:53:58 2014