! Started logfile: /d2/scr/pima/bp177g_uvs/J1523-3936_C_uvs.log on Thu Mar  6 00:36:03 2014
obs /d2/scr/pima/bp177g_uvs/J1523-3936_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177g_uvs/J1523-3936_C_uva.fits
! AN table 1: 5 integrations on 10 of 10 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1523-3936
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 400 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177g_uvs/J1523-3936_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.005876Jy  sigma=27.474121
! Fit after  self-cal, rms=0.923933Jy  sigma=25.051890
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.901 mas, bmaj=76.01 mas, bpa=-23.75 degrees
! Estimated noise=2.39382 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0518942 Jy
! Component: 100  -  total flux cleaned = 0.0736954 Jy
! Total flux subtracted in 100 components = 0.0736954 Jy
! Clean residual min=-0.006239 max=0.010745 Jy/beam
! Clean residual mean=-0.000119 rms=0.003339 Jy/beam
! Combined flux in latest and established models = 0.0736954 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0736954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036099Jy  sigma=0.913302
! Fit after  self-cal, rms=0.035728Jy  sigma=0.904473
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.068 mas, bmaj=67.61 mas, bpa=-23.51 degrees
! Estimated noise=1.34172 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183406 Jy
! Component: 100  -  total flux cleaned = 0.0205516 Jy
! Component: 150  -  total flux cleaned = 0.0220584 Jy
! Component: 200  -  total flux cleaned = 0.0232251 Jy
! Total flux subtracted in 200 components = 0.0232251 Jy
! Clean residual min=-0.002848 max=0.002859 Jy/beam
! Clean residual mean=0.000023 rms=0.001514 Jy/beam
! Combined flux in latest and established models = 0.0969205 Jy
! Performing phase self-cal
! Adding 107 model components to the UV plane model.
! The established model now contains 131 components and 0.0969205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025050Jy  sigma=0.588603
! Fit after  self-cal, rms=0.024993Jy  sigma=0.587701
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.068 x 67.61 at -23.51 degrees (North through East)
! Clean map  min=-0.0056849  max=0.075518 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.11     KP        0.97     LA        0.98     NL        1.09     
!   PT        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        0.99     LA        1.03     NL        1.17     
!   PT        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.01     LA        0.98     NL        1.02     
!   PT        0.91     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        0.95     LA        1.10     NL        0.94     
!   PT        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        0.96     LA        1.01     NL        0.91     
!   PT        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.16     KP        0.94     LA        1.08     NL        1.17     
!   PT        0.93     
! 
! 
! Fit before self-cal, rms=0.024993Jy  sigma=0.587701
! Fit after  self-cal, rms=0.024792Jy  sigma=0.563330
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.089 mas, bmaj=68.1 mas, bpa=-23.51 degrees
! Estimated noise=1.35579 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141003 Jy
! Component: 100  -  total flux cleaned = 0.00186991 Jy
! Component: 150  -  total flux cleaned = 0.00249971 Jy
! Component: 200  -  total flux cleaned = 0.00318868 Jy
! Total flux subtracted in 200 components = 0.00318868 Jy
! Clean residual min=-0.001085 max=0.001100 Jy/beam
! Clean residual mean=0.000004 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.100109 Jy
! Performing phase self-cal
! Adding 101 model components to the UV plane model.
! The established model now contains 229 components and 0.100109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023966Jy  sigma=0.549080
! Fit after  self-cal, rms=0.023930Jy  sigma=0.548584
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023930Jy  sigma=0.548584
! Fit after  self-cal, rms=0.024102Jy  sigma=0.543688
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.074 mas, bmaj=68.11 mas, bpa=-23.51 degrees
! Estimated noise=1.3794 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183748 Jy
! Component: 100  -  total flux cleaned = 0.00233303 Jy
! Component: 150  -  total flux cleaned = 0.00265169 Jy
! Component: 200  -  total flux cleaned = 0.0026 Jy
! Total flux subtracted in 200 components = 0.0026 Jy
! Clean residual min=-0.000905 max=0.000896 Jy/beam
! Clean residual mean=-0.000008 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.102709 Jy
selfcal
! Performing phase self-cal
! Adding 106 model components to the UV plane model.
! The established model now contains 326 components and 0.102709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023610Jy  sigma=0.536211
! Fit after  self-cal, rms=0.023586Jy  sigma=0.536038
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000303027 Jy
! Component: 100  -  total flux cleaned = -0.000706857 Jy
! Component: 150  -  total flux cleaned = -0.00104141 Jy
! Component: 200  -  total flux cleaned = -0.0015209 Jy
! Total flux subtracted in 200 components = -0.0015209 Jy
! Clean residual min=-0.000653 max=0.000649 Jy/beam
! Clean residual mean=-0.000011 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.101188 Jy
! Performing phase self-cal
! Adding 87 model components to the UV plane model.
! The established model now contains 402 components and 0.101188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023387Jy  sigma=0.533692
! Fit after  self-cal, rms=0.023377Jy  sigma=0.533628
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023377Jy  sigma=0.533628
! Fit after  self-cal, rms=0.023640Jy  sigma=0.529326
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.072 mas, bmaj=68.02 mas, bpa=-23.51 degrees
! Estimated noise=1.40297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138335 Jy
! Component: 100  -  total flux cleaned = 0.00208379 Jy
! Component: 150  -  total flux cleaned = 0.00249338 Jy
! Component: 200  -  total flux cleaned = 0.00262168 Jy
! Total flux subtracted in 200 components = 0.00262168 Jy
! Clean residual min=-0.000667 max=0.000669 Jy/beam
! Clean residual mean=-0.000004 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.10381 Jy
selfcal
! Performing phase self-cal
! Adding 102 model components to the UV plane model.
! The established model now contains 487 components and 0.10381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023352Jy  sigma=0.525425
! Fit after  self-cal, rms=0.023345Jy  sigma=0.525381
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000354829 Jy
! Component: 100  -  total flux cleaned = -0.000702219 Jy
! Component: 150  -  total flux cleaned = -0.00110042 Jy
! Component: 200  -  total flux cleaned = -0.00138904 Jy
! Total flux subtracted in 200 components = -0.00138904 Jy
! Clean residual min=-0.000528 max=0.000527 Jy/beam
! Clean residual mean=-0.000005 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.102421 Jy
! Performing phase self-cal
! Adding 84 model components to the UV plane model.
! The established model now contains 553 components and 0.102421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023223Jy  sigma=0.524076
! Fit after  self-cal, rms=0.023218Jy  sigma=0.524047
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023218Jy  sigma=0.524047
! Fit after  self-cal, rms=0.023442Jy  sigma=0.516744
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.84 mas, bmaj=65.51 mas, bpa=-23.57 degrees
! Estimated noise=1.40324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107997 Jy
! Component: 100  -  total flux cleaned = 0.00131919 Jy
! Component: 150  -  total flux cleaned = 0.00142471 Jy
! Component: 200  -  total flux cleaned = 0.00131691 Jy
! Total flux subtracted in 200 components = 0.00131691 Jy
! Clean residual min=-0.000443 max=0.000440 Jy/beam
! Clean residual mean=-0.000005 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.103738 Jy
selfcal
! Performing phase self-cal
! Adding 111 model components to the UV plane model.
! The established model now contains 660 components and 0.103738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023261Jy  sigma=0.514758
! Fit after  self-cal, rms=0.023252Jy  sigma=0.514719
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000184217 Jy
! Component: 100  -  total flux cleaned = -0.000431198 Jy
! Component: 150  -  total flux cleaned = -0.0006614 Jy
! Component: 200  -  total flux cleaned = -0.000880373 Jy
! Total flux subtracted in 200 components = -0.000880373 Jy
! Clean residual min=-0.000327 max=0.000327 Jy/beam
! Clean residual mean=-0.000002 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.102857 Jy
! Performing phase self-cal
! Adding 92 model components to the UV plane model.
! The established model now contains 741 components and 0.102857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023190Jy  sigma=0.514333
! Fit after  self-cal, rms=0.023187Jy  sigma=0.514322
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.099 mas, bmaj=67.88 mas, bpa=-23.5 degrees
! Estimated noise=1.42552 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.099 x 67.88 at -23.5 degrees (North through East)
! Clean map  min=-0.0035996  max=0.076274 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.928 mas, bmaj=75.88 mas, bpa=-23.73 degrees
! Estimated noise=2.55849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0554155 Jy
! Component: 100  -  total flux cleaned = 0.0784526 Jy
! Component: 150  -  total flux cleaned = 0.0911886 Jy
! Component: 200  -  total flux cleaned = 0.0962209 Jy
! Total flux subtracted in 200 components = 0.0962209 Jy
! Clean residual min=-0.004479 max=0.004467 Jy/beam
! Clean residual mean=-0.000019 rms=0.001945 Jy/beam
! Combined flux in latest and established models = 0.0962209 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 82 model components to the UV plane model.
! The established model now contains 82 components and 0.0962209 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.099 mas, bmaj=67.88 mas, bpa=-23.5 degrees
! Estimated noise=1.42552 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0051355 Jy
! Component: 100  -  total flux cleaned = 0.00653926 Jy
! Component: 150  -  total flux cleaned = 0.00860213 Jy
! Component: 200  -  total flux cleaned = 0.0101841 Jy
! Total flux subtracted in 200 components = 0.0101841 Jy
! Clean residual min=-0.002402 max=0.002411 Jy/beam
! Clean residual mean=0.000040 rms=0.001225 Jy/beam
! Combined flux in latest and established models = 0.106405 Jy
! Adding 108 model components to the UV plane model.
! The established model now contains 184 components and 0.106405 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.84 mas, bmaj=65.51 mas, bpa=-23.57 degrees
! Estimated noise=1.40324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.52081e-05 Jy
! Component: 100  -  total flux cleaned = 0.000701769 Jy
! Component: 150  -  total flux cleaned = 0.00203239 Jy
! Component: 200  -  total flux cleaned = 0.00313894 Jy
! Total flux subtracted in 200 components = 0.00313894 Jy
! Clean residual min=-0.001157 max=0.001150 Jy/beam
! Clean residual mean=0.000002 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.109544 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000595929 Jy
! Component: 100  -  total flux cleaned = 0.00150284 Jy
! Component: 150  -  total flux cleaned = 0.00211874 Jy
! Component: 200  -  total flux cleaned = 0.0031901 Jy
! Total flux subtracted in 200 components = 0.0031901 Jy
! Clean residual min=-0.000870 max=0.000881 Jy/beam
! Clean residual mean=0.000010 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.112734 Jy
! Adding 199 model components to the UV plane model.
! The established model now contains 378 components and 0.112734 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.099 mas, bmaj=67.88 mas, bpa=-23.5 degrees
! Estimated noise=1.42552 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103406 Jy
! Component: 100  -  total flux cleaned = -0.001626 Jy
! Component: 150  -  total flux cleaned = -0.00215394 Jy
! Component: 200  -  total flux cleaned = -0.002858 Jy
! Total flux subtracted in 200 components = -0.002858 Jy
! Clean residual min=-0.000573 max=0.000569 Jy/beam
! Clean residual mean=-0.000011 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.109876 Jy
selfcal
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 451 components and 0.109876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023375Jy  sigma=0.517576
! Fit after  self-cal, rms=0.023361Jy  sigma=0.517340
wmodel /d2/scr/pima/bp177g_uvs/J1523-3936_C_map.mod
! Writing 451 model components to file: /d2/scr/pima/bp177g_uvs/J1523-3936_C_map.mod
wobs /d2/scr/pima/bp177g_uvs/J1523-3936_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177g_uvs/J1523-3936_C_uvs.fits
wwins /d2/scr/pima/bp177g_uvs/J1523-3936_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177g_uvs/J1523-3936_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.099 x 67.88 at -23.5 degrees (North through East)
! Clean map  min=-0.0037169  max=0.075848 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177g_uvs/J1523-3936_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0758477 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000252274 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.997817 0.997817 1.99563 3.99127 7.98254 15.9651 31.9301 63.8603
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.075 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  300.656 
quit
! Quitting program
! Log file /d2/scr/pima/bp177g_uvs/J1523-3936_C_uvs.log closed on Thu Mar  6 00:36:14 2014