! Started logfile: /d2/scr/pima/bp177g_uvs/J1522-3920_C_uvs.log on Thu Mar  6 00:35:47 2014
obs /d2/scr/pima/bp177g_uvs/J1522-3920_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177g_uvs/J1522-3920_C_uva.fits
! AN table 1: 9 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.7 visibilities/baseline/integration-bin.
! Found source: J1522-3920
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 504 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177g_uvs/J1522-3920_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999929Jy  sigma=29.356958
! Fit after  self-cal, rms=0.978398Jy  sigma=27.522170
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.4 mas, bmaj=67.86 mas, bpa=-28.34 degrees
! Estimated noise=1.61869 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0167142 Jy
! Component: 100  -  total flux cleaned = 0.0179597 Jy
! Total flux subtracted in 100 components = 0.0179597 Jy
! Clean residual min=-0.001824 max=0.001811 Jy/beam
! Clean residual mean=-0.000216 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.0179597 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0179597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020434Jy  sigma=0.543722
! Fit after  self-cal, rms=0.018873Jy  sigma=0.502190
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.31 mas, bmaj=62.18 mas, bpa=-26.34 degrees
! Estimated noise=1.22492 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000768312 Jy
! Component: 100  -  total flux cleaned = -0.00205418 Jy
! Component: 150  -  total flux cleaned = -0.00356455 Jy
! Component: 200  -  total flux cleaned = -0.00483021 Jy
! Total flux subtracted in 200 components = -0.00483021 Jy
! Clean residual min=-0.000797 max=0.000705 Jy/beam
! Clean residual mean=-0.000084 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.0131295 Jy
! Performing phase self-cal
! Adding 123 model components to the UV plane model.
! The established model now contains 144 components and 0.0131295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018152Jy  sigma=0.486227
! Fit after  self-cal, rms=0.017984Jy  sigma=0.484209
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.31 x 62.18 at -26.34 degrees (North through East)
! Clean map  min=-0.0033361  max=0.02078 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.19     KP        0.99     LA        0.99     PT        1.04     
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        0.97     LA        0.95     PT        0.84     
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.017984Jy  sigma=0.484209
! Fit after  self-cal, rms=0.017811Jy  sigma=0.481724
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.31 mas, bmaj=62.32 mas, bpa=-26.41 degrees
! Estimated noise=1.21528 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000567232 Jy
! Component: 100  -  total flux cleaned = -0.000512581 Jy
! Component: 150  -  total flux cleaned = -0.000379342 Jy
! Component: 200  -  total flux cleaned = -0.0002101 Jy
! Total flux subtracted in 200 components = -0.0002101 Jy
! Clean residual min=-0.000382 max=0.000385 Jy/beam
! Clean residual mean=-0.000008 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.0129194 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 210 components and 0.0129194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017664Jy  sigma=0.478966
! Fit after  self-cal, rms=0.017605Jy  sigma=0.476432
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017605Jy  sigma=0.476432
! Fit after  self-cal, rms=0.017897Jy  sigma=0.475151
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.27 mas, bmaj=62.53 mas, bpa=-26.48 degrees
! Estimated noise=1.23835 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000710407 Jy
! Component: 100  -  total flux cleaned = -0.000672487 Jy
! Component: 150  -  total flux cleaned = -0.00069885 Jy
! Component: 200  -  total flux cleaned = -0.000634399 Jy
! Total flux subtracted in 200 components = -0.000634399 Jy
! Clean residual min=-0.000348 max=0.000349 Jy/beam
! Clean residual mean=-0.000004 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.012285 Jy
selfcal
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 289 components and 0.012285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017785Jy  sigma=0.473106
! Fit after  self-cal, rms=0.017780Jy  sigma=0.472935
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000145719 Jy
! Component: 100  -  total flux cleaned = -6.72832e-05 Jy
! Component: 150  -  total flux cleaned = 6.9787e-05 Jy
! Component: 200  -  total flux cleaned = 0.000246182 Jy
! Total flux subtracted in 200 components = 0.000246182 Jy
! Clean residual min=-0.000261 max=0.000259 Jy/beam
! Clean residual mean=0.000009 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.0125312 Jy
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 354 components and 0.0125312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017734Jy  sigma=0.472151
! Fit after  self-cal, rms=0.017724Jy  sigma=0.472074
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017724Jy  sigma=0.472074
! Fit after  self-cal, rms=0.017979Jy  sigma=0.471675
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.27 mas, bmaj=62.61 mas, bpa=-26.53 degrees
! Estimated noise=1.25197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00011309 Jy
! Component: 100  -  total flux cleaned = -4.05472e-05 Jy
! Component: 150  -  total flux cleaned = -5.6066e-05 Jy
! Component: 200  -  total flux cleaned = -5.6135e-05 Jy
! Total flux subtracted in 200 components = -5.6135e-05 Jy
! Clean residual min=-0.000236 max=0.000237 Jy/beam
! Clean residual mean=0.000007 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.012475 Jy
selfcal
! Performing phase self-cal
! Adding 106 model components to the UV plane model.
! The established model now contains 446 components and 0.012475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017937Jy  sigma=0.470933
! Fit after  self-cal, rms=0.017937Jy  sigma=0.470905
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.82858e-05 Jy
! Component: 100  -  total flux cleaned = -3.13088e-05 Jy
! Component: 150  -  total flux cleaned = 5.85802e-05 Jy
! Component: 200  -  total flux cleaned = 0.000142188 Jy
! Total flux subtracted in 200 components = 0.000142188 Jy
! Clean residual min=-0.000195 max=0.000193 Jy/beam
! Clean residual mean=0.000009 rms=0.000090 Jy/beam
! Combined flux in latest and established models = 0.0126172 Jy
! Performing phase self-cal
! Adding 87 model components to the UV plane model.
! The established model now contains 514 components and 0.0126172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017916Jy  sigma=0.470478
! Fit after  self-cal, rms=0.017911Jy  sigma=0.470457
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017911Jy  sigma=0.470457
! Fit after  self-cal, rms=0.018082Jy  sigma=0.470309
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.4 mas, bmaj=62.34 mas, bpa=-26.54 degrees
! Estimated noise=1.2588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.6647e-05 Jy
! Component: 100  -  total flux cleaned = -2.42074e-05 Jy
! Component: 150  -  total flux cleaned = 4.83724e-05 Jy
! Component: 200  -  total flux cleaned = 0.000116379 Jy
! Total flux subtracted in 200 components = 0.000116379 Jy
! Clean residual min=-0.000184 max=0.000185 Jy/beam
! Clean residual mean=0.000006 rms=0.000088 Jy/beam
! Combined flux in latest and established models = 0.0127336 Jy
selfcal
! Performing phase self-cal
! Adding 100 model components to the UV plane model.
! The established model now contains 593 components and 0.0127336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018061Jy  sigma=0.469896
! Fit after  self-cal, rms=0.018060Jy  sigma=0.469884
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.64995e-05 Jy
! Component: 100  -  total flux cleaned = -5.39811e-05 Jy
! Component: 150  -  total flux cleaned = -1.21158e-05 Jy
! Component: 200  -  total flux cleaned = 5.7372e-05 Jy
! Total flux subtracted in 200 components = 5.7372e-05 Jy
! Clean residual min=-0.000159 max=0.000159 Jy/beam
! Clean residual mean=0.000006 rms=0.000079 Jy/beam
! Combined flux in latest and established models = 0.012791 Jy
! Performing phase self-cal
! Adding 96 model components to the UV plane model.
! The established model now contains 666 components and 0.012791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018047Jy  sigma=0.469570
! Fit after  self-cal, rms=0.018045Jy  sigma=0.469560
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=12.25 mas, bmaj=62.66 mas, bpa=-26.57 degrees
! Estimated noise=1.25873 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.25 x 62.66 at -26.57 degrees (North through East)
! Clean map  min=-0.0038164  max=0.02023 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.35 mas, bmaj=69.64 mas, bpa=-28.64 degrees
! Estimated noise=1.60026 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174855 Jy
! Component: 100  -  total flux cleaned = 0.0181524 Jy
! Component: 150  -  total flux cleaned = 0.0179976 Jy
! Component: 200  -  total flux cleaned = 0.0155841 Jy
! Total flux subtracted in 200 components = 0.0155841 Jy
! Clean residual min=-0.001711 max=0.001556 Jy/beam
! Clean residual mean=-0.000150 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.0155841 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 83 model components to the UV plane model.
! The established model now contains 83 components and 0.0155841 Jy
! Inverting map and beam 
! Estimated beam: bmin=12.25 mas, bmaj=62.66 mas, bpa=-26.57 degrees
! Estimated noise=1.25873 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00191621 Jy
! Component: 100  -  total flux cleaned = -0.00303253 Jy
! Component: 150  -  total flux cleaned = -0.00390957 Jy
! Component: 200  -  total flux cleaned = -0.00461042 Jy
! Total flux subtracted in 200 components = -0.00461042 Jy
! Clean residual min=-0.000660 max=0.000659 Jy/beam
! Clean residual mean=-0.000047 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.0109737 Jy
! Adding 98 model components to the UV plane model.
! The established model now contains 179 components and 0.0109737 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.4 mas, bmaj=62.34 mas, bpa=-26.54 degrees
! Estimated noise=1.2588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229208 Jy
! Component: 100  -  total flux cleaned = 0.000455795 Jy
! Component: 150  -  total flux cleaned = 0.000741483 Jy
! Component: 200  -  total flux cleaned = 0.00102768 Jy
! Total flux subtracted in 200 components = 0.00102768 Jy
! Clean residual min=-0.000419 max=0.000420 Jy/beam
! Clean residual mean=0.000010 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0120014 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00042233 Jy
! Component: 100  -  total flux cleaned = 0.00102899 Jy
! Component: 150  -  total flux cleaned = 0.0016974 Jy
! Component: 200  -  total flux cleaned = 0.00241361 Jy
! Total flux subtracted in 200 components = 0.00241361 Jy
! Clean residual min=-0.000448 max=0.000494 Jy/beam
! Clean residual mean=0.000019 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.014415 Jy
! Adding 106 model components to the UV plane model.
! The established model now contains 280 components and 0.014415 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=12.25 mas, bmaj=62.66 mas, bpa=-26.57 degrees
! Estimated noise=1.25873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000471865 Jy
! Component: 100  -  total flux cleaned = -0.000537921 Jy
! Component: 150  -  total flux cleaned = -0.000640662 Jy
! Component: 200  -  total flux cleaned = -0.000698183 Jy
! Total flux subtracted in 200 components = -0.000698183 Jy
! Clean residual min=-0.000308 max=0.000306 Jy/beam
! Clean residual mean=-0.000003 rms=0.000124 Jy/beam
! Combined flux in latest and established models = 0.0137168 Jy
selfcal
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 353 components and 0.0137168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018090Jy  sigma=0.471106
! Fit after  self-cal, rms=0.018096Jy  sigma=0.470937
wmodel /d2/scr/pima/bp177g_uvs/J1522-3920_C_map.mod
! Writing 353 model components to file: /d2/scr/pima/bp177g_uvs/J1522-3920_C_map.mod
wobs /d2/scr/pima/bp177g_uvs/J1522-3920_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177g_uvs/J1522-3920_C_uvs.fits
wwins /d2/scr/pima/bp177g_uvs/J1522-3920_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177g_uvs/J1522-3920_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.25 x 62.66 at -26.57 degrees (North through East)
! Clean map  min=-0.0033827  max=0.018668 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177g_uvs/J1522-3920_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0186678 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00011655 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.87301 1.87301 3.74601 7.49203 14.9841 29.9681 59.9362
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.018 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  160.17 
quit
! Quitting program
! Log file /d2/scr/pima/bp177g_uvs/J1522-3920_C_uvs.log closed on Thu Mar  6 00:35:56 2014