! Started logfile: /d2/scr/pima/bp177g_uvs/J1510-4324_C_uvs.log on Thu Mar  6 00:35:14 2014
obs /d2/scr/pima/bp177g_uvs/J1510-4324_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177g_uvs/J1510-4324_C_uva.fits
! AN table 1: 9 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.7 visibilities/baseline/integration-bin.
! Found source: J1510-4324
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 504 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177g_uvs/J1510-4324_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001750Jy  sigma=28.910463
! Fit after  self-cal, rms=0.966334Jy  sigma=28.574455
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.15 mas, bmaj=60.21 mas, bpa=-8.352 degrees
! Estimated noise=3.21239 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0222611 Jy
! Component: 100  -  total flux cleaned = 0.0207422 Jy
! Total flux subtracted in 100 components = 0.0207422 Jy
! Clean residual min=-0.005731 max=0.005746 Jy/beam
! Clean residual mean=0.000003 rms=0.002487 Jy/beam
! Combined flux in latest and established models = 0.0207422 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.0207422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021952Jy  sigma=0.614751
! Fit after  self-cal, rms=0.020891Jy  sigma=0.597279
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.46 mas, bmaj=56.83 mas, bpa=-7.745 degrees
! Estimated noise=1.1643 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00185534 Jy
! Component: 100  -  total flux cleaned = -0.00231503 Jy
! Component: 150  -  total flux cleaned = -0.00261511 Jy
! Component: 200  -  total flux cleaned = -0.00311279 Jy
! Total flux subtracted in 200 components = -0.00311279 Jy
! Clean residual min=-0.001264 max=0.001277 Jy/beam
! Clean residual mean=-0.000002 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.0176294 Jy
! Performing phase self-cal
! Adding 118 model components to the UV plane model.
! The established model now contains 156 components and 0.0176294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018785Jy  sigma=0.528992
! Fit after  self-cal, rms=0.018844Jy  sigma=0.526414
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.46 x 56.83 at -7.745 degrees (North through East)
! Clean map  min=-0.0059396  max=0.025463 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        0.97     LA        0.91     OV        1.00*    
!   PT        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        1.03     LA        1.01     OV        1.00*    
!   PT        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.84     KP        1.17     LA        1.06     OV        1.00*    
!   PT        1.17     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.86     KP        0.92     LA        0.97     OV        1.00*    
!   PT        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.018844Jy  sigma=0.526414
! Fit after  self-cal, rms=0.018413Jy  sigma=0.516588
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.46 mas, bmaj=56.53 mas, bpa=-7.541 degrees
! Estimated noise=1.14606 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.94233e-05 Jy
! Component: 100  -  total flux cleaned = -0.000235262 Jy
! Component: 150  -  total flux cleaned = -0.000207593 Jy
! Component: 200  -  total flux cleaned = -0.000131177 Jy
! Total flux subtracted in 200 components = -0.000131177 Jy
! Clean residual min=-0.000413 max=0.000416 Jy/beam
! Clean residual mean=-0.000022 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.0174982 Jy
! Performing phase self-cal
! Adding 106 model components to the UV plane model.
! The established model now contains 262 components and 0.0174982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018332Jy  sigma=0.513592
! Fit after  self-cal, rms=0.018368Jy  sigma=0.513307
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018368Jy  sigma=0.513307
! Fit after  self-cal, rms=0.018352Jy  sigma=0.512982
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.47 mas, bmaj=56.5 mas, bpa=-7.479 degrees
! Estimated noise=1.14019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000410019 Jy
! Component: 100  -  total flux cleaned = -0.000549579 Jy
! Component: 150  -  total flux cleaned = -0.000508476 Jy
! Component: 200  -  total flux cleaned = -0.000407317 Jy
! Total flux subtracted in 200 components = -0.000407317 Jy
! Clean residual min=-0.000331 max=0.000331 Jy/beam
! Clean residual mean=-0.000019 rms=0.000153 Jy/beam
! Combined flux in latest and established models = 0.0170909 Jy
selfcal
! Performing phase self-cal
! Adding 110 model components to the UV plane model.
! The established model now contains 352 components and 0.0170909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018310Jy  sigma=0.511336
! Fit after  self-cal, rms=0.018308Jy  sigma=0.511295
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000137431 Jy
! Component: 100  -  total flux cleaned = -0.000156532 Jy
! Component: 150  -  total flux cleaned = -8.50661e-05 Jy
! Component: 200  -  total flux cleaned = -4.98689e-05 Jy
! Total flux subtracted in 200 components = -4.98689e-05 Jy
! Clean residual min=-0.000291 max=0.000290 Jy/beam
! Clean residual mean=-0.000018 rms=0.000139 Jy/beam
! Combined flux in latest and established models = 0.017041 Jy
! Performing phase self-cal
! Adding 100 model components to the UV plane model.
! The established model now contains 434 components and 0.017041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018279Jy  sigma=0.510283
! Fit after  self-cal, rms=0.018273Jy  sigma=0.510260
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018273Jy  sigma=0.510260
! Fit after  self-cal, rms=0.018242Jy  sigma=0.510086
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.46 mas, bmaj=56.5 mas, bpa=-7.445 degrees
! Estimated noise=1.13547 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000383699 Jy
! Component: 100  -  total flux cleaned = -0.000419532 Jy
! Component: 150  -  total flux cleaned = -0.00041976 Jy
! Component: 200  -  total flux cleaned = -0.000370425 Jy
! Total flux subtracted in 200 components = -0.000370425 Jy
! Clean residual min=-0.000278 max=0.000276 Jy/beam
! Clean residual mean=-0.000017 rms=0.000132 Jy/beam
! Combined flux in latest and established models = 0.0166706 Jy
selfcal
! Performing phase self-cal
! Adding 118 model components to the UV plane model.
! The established model now contains 505 components and 0.0166706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018216Jy  sigma=0.509088
! Fit after  self-cal, rms=0.018214Jy  sigma=0.509067
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000131743 Jy
! Component: 100  -  total flux cleaned = -0.000225115 Jy
! Component: 150  -  total flux cleaned = -0.000225065 Jy
! Component: 200  -  total flux cleaned = -0.000224747 Jy
! Total flux subtracted in 200 components = -0.000224747 Jy
! Clean residual min=-0.000248 max=0.000249 Jy/beam
! Clean residual mean=-0.000017 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.0164459 Jy
! Performing phase self-cal
! Adding 112 model components to the UV plane model.
! The established model now contains 579 components and 0.0164459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018192Jy  sigma=0.508336
! Fit after  self-cal, rms=0.018189Jy  sigma=0.508323
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018189Jy  sigma=0.508323
! Fit after  self-cal, rms=0.018176Jy  sigma=0.508256
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.6 mas, bmaj=56.23 mas, bpa=-7.389 degrees
! Estimated noise=1.1346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000267875 Jy
! Component: 100  -  total flux cleaned = -0.000343525 Jy
! Component: 150  -  total flux cleaned = -0.000416923 Jy
! Component: 200  -  total flux cleaned = -0.000445785 Jy
! Total flux subtracted in 200 components = -0.000445785 Jy
! Clean residual min=-0.000240 max=0.000243 Jy/beam
! Clean residual mean=-0.000017 rms=0.000120 Jy/beam
! Combined flux in latest and established models = 0.0160001 Jy
selfcal
! Performing phase self-cal
! Adding 123 model components to the UV plane model.
! The established model now contains 638 components and 0.0160001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018156Jy  sigma=0.507519
! Fit after  self-cal, rms=0.018155Jy  sigma=0.507507
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.39428e-05 Jy
! Component: 100  -  total flux cleaned = -9.94453e-05 Jy
! Component: 150  -  total flux cleaned = -0.00011282 Jy
! Component: 200  -  total flux cleaned = -0.000112339 Jy
! Total flux subtracted in 200 components = -0.000112339 Jy
! Clean residual min=-0.000225 max=0.000221 Jy/beam
! Clean residual mean=-0.000016 rms=0.000112 Jy/beam
! Combined flux in latest and established models = 0.0158877 Jy
! Performing phase self-cal
! Adding 127 model components to the UV plane model.
! The established model now contains 718 components and 0.0158877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018138Jy  sigma=0.506929
! Fit after  self-cal, rms=0.018136Jy  sigma=0.506922
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=11.45 mas, bmaj=56.5 mas, bpa=-7.427 degrees
! Estimated noise=1.13325 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.45 x 56.5 at -7.427 degrees (North through East)
! Clean map  min=-0.0056626  max=0.025384 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.12 mas, bmaj=59.94 mas, bpa=-8.109 degrees
! Estimated noise=3.12549 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0207801 Jy
! Component: 100  -  total flux cleaned = 0.0202152 Jy
! Component: 150  -  total flux cleaned = 0.0208507 Jy
! Component: 200  -  total flux cleaned = 0.022219 Jy
! Total flux subtracted in 200 components = 0.022219 Jy
! Clean residual min=-0.004345 max=0.004393 Jy/beam
! Clean residual mean=0.000022 rms=0.001806 Jy/beam
! Combined flux in latest and established models = 0.022219 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 93 model components to the UV plane model.
! The established model now contains 93 components and 0.022219 Jy
! Inverting map and beam 
! Estimated beam: bmin=11.45 mas, bmaj=56.5 mas, bpa=-7.427 degrees
! Estimated noise=1.13325 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00195499 Jy
! Component: 100  -  total flux cleaned = -0.00212483 Jy
! Component: 150  -  total flux cleaned = -0.00211982 Jy
! Component: 200  -  total flux cleaned = -0.00186226 Jy
! Total flux subtracted in 200 components = -0.00186226 Jy
! Clean residual min=-0.002113 max=0.002124 Jy/beam
! Clean residual mean=-0.000038 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.0203567 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 148 components and 0.0203567 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.6 mas, bmaj=56.23 mas, bpa=-7.389 degrees
! Estimated noise=1.1346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000598557 Jy
! Component: 100  -  total flux cleaned = 7.98736e-05 Jy
! Component: 150  -  total flux cleaned = -0.000128319 Jy
! Component: 200  -  total flux cleaned = -0.000166583 Jy
! Total flux subtracted in 200 components = -0.000166583 Jy
! Clean residual min=-0.000514 max=0.000504 Jy/beam
! Clean residual mean=-0.000016 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.0201902 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.46557e-05 Jy
! Component: 100  -  total flux cleaned = 0.000220697 Jy
! Component: 150  -  total flux cleaned = 0.000325656 Jy
! Component: 200  -  total flux cleaned = 0.000273569 Jy
! Total flux subtracted in 200 components = 0.000273569 Jy
! Clean residual min=-0.000430 max=0.000434 Jy/beam
! Clean residual mean=-0.000015 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.0204637 Jy
! Adding 195 model components to the UV plane model.
! The established model now contains 343 components and 0.0204637 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=11.45 mas, bmaj=56.5 mas, bpa=-7.427 degrees
! Estimated noise=1.13325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000631579 Jy
! Component: 100  -  total flux cleaned = -0.000791139 Jy
! Component: 150  -  total flux cleaned = -0.00076612 Jy
! Component: 200  -  total flux cleaned = -0.000650604 Jy
! Total flux subtracted in 200 components = -0.000650604 Jy
! Clean residual min=-0.000376 max=0.000377 Jy/beam
! Clean residual mean=-0.000022 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.0198131 Jy
selfcal
! Performing phase self-cal
! Adding 105 model components to the UV plane model.
! The established model now contains 443 components and 0.0198131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018261Jy  sigma=0.510766
! Fit after  self-cal, rms=0.018267Jy  sigma=0.510425
wmodel /d2/scr/pima/bp177g_uvs/J1510-4324_C_map.mod
! Writing 443 model components to file: /d2/scr/pima/bp177g_uvs/J1510-4324_C_map.mod
wobs /d2/scr/pima/bp177g_uvs/J1510-4324_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177g_uvs/J1510-4324_C_uvs.fits
wwins /d2/scr/pima/bp177g_uvs/J1510-4324_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177g_uvs/J1510-4324_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.45 x 56.5 at -7.427 degrees (North through East)
! Clean map  min=-0.006605  max=0.019146 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177g_uvs/J1510-4324_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0191463 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000152806 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.39428 2.39428 4.78857 9.57713 19.1543 38.3085 76.6171
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.019 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  125.298 
quit
! Quitting program
! Log file /d2/scr/pima/bp177g_uvs/J1510-4324_C_uvs.log closed on Thu Mar  6 00:35:24 2014