! Started logfile: /d2/scr/pima/bp177g_uvs/J1308+5530_X_uvs.log on Thu Mar  6 00:15:40 2014
obs /d2/scr/pima/bp177g_uvs/J1308+5530_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177g_uvs/J1308+5530_X_uva.fits
! AN table 1: 9 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.42963 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1308+5530
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1392 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177g_uvs/J1308+5530_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002668Jy  sigma=38.330850
! Fit after  self-cal, rms=0.949353Jy  sigma=36.276056
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7083 mas, bmaj=2.754 mas, bpa=-2.645 degrees
! Estimated noise=0.73758 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.037415 Jy
! Component: 100  -  total flux cleaned = 0.0465034 Jy
! Total flux subtracted in 100 components = 0.0465034 Jy
! Clean residual min=-0.003080 max=0.005284 Jy/beam
! Clean residual mean=-0.000000 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.0465034 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0465034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022765Jy  sigma=0.740416
! Fit after  self-cal, rms=0.022375Jy  sigma=0.724468
! Inverting map 
! Added new window around map position (-2, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00525518 Jy
! Component: 100  -  total flux cleaned = 0.00847712 Jy
! Total flux subtracted in 100 components = 0.00847712 Jy
! Clean residual min=-0.002417 max=0.003444 Jy/beam
! Clean residual mean=-0.000000 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.0549805 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 0.0549805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020812Jy  sigma=0.648104
! Fit after  self-cal, rms=0.020646Jy  sigma=0.642662
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8454 mas, bmaj=2.9 mas, bpa=-2.116 degrees
! Estimated noise=0.518812 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045415 Jy
! Component: 100  -  total flux cleaned = 0.0073229 Jy
! Component: 150  -  total flux cleaned = 0.00922062 Jy
! Component: 200  -  total flux cleaned = 0.0105298 Jy
! Total flux subtracted in 200 components = 0.0105298 Jy
! Clean residual min=-0.002118 max=0.001809 Jy/beam
! Clean residual mean=-0.000000 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.0655103 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 43 components and 0.0655103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019511Jy  sigma=0.587381
! Fit after  self-cal, rms=0.019452Jy  sigma=0.585307
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8454 x 2.9 at -2.116 degrees (North through East)
! Clean map  min=-0.0018192  max=0.047813 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.05     HN        0.99     KP        1.01     
!   LA        0.97     MK        1.02     NL        1.08     OV        0.91     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.05     HN        1.00     KP        0.84     
!   LA        1.00     MK        1.11     NL        0.95     OV        0.90     
!   PT        1.06     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.96     HN        0.98     KP        0.96     
!   LA        1.00     MK        0.97     NL        0.94     OV        0.91     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.05     HN        1.03     KP        0.91     
!   LA        1.07     MK        0.99     NL        1.09     OV        0.95     
!   PT        1.08     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.00     HN        0.98     KP        0.92     
!   LA        1.03     MK        1.05     NL        1.07     OV        0.94     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        0.94     HN        1.02     KP        1.01     
!   LA        0.97     MK        1.04     NL        1.08     OV        0.93     
!   PT        0.92     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.019452Jy  sigma=0.585307
! Fit after  self-cal, rms=0.018933Jy  sigma=0.569179
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8467 mas, bmaj=2.901 mas, bpa=-1.647 degrees
! Estimated noise=0.525524 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000452612 Jy
! Component: 100  -  total flux cleaned = 0.000749355 Jy
! Component: 150  -  total flux cleaned = 0.000770989 Jy
! Component: 200  -  total flux cleaned = 0.000787698 Jy
! Total flux subtracted in 200 components = 0.000787698 Jy
! Clean residual min=-0.001523 max=0.001489 Jy/beam
! Clean residual mean=-0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.066298 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 62 components and 0.066298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018853Jy  sigma=0.566274
! Fit after  self-cal, rms=0.018854Jy  sigma=0.565794
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018854Jy  sigma=0.565794
! Fit after  self-cal, rms=0.018865Jy  sigma=0.565588
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8454 mas, bmaj=2.901 mas, bpa=-1.653 degrees
! Estimated noise=0.526113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000615744 Jy
! Component: 100  -  total flux cleaned = 0.000718608 Jy
! Component: 150  -  total flux cleaned = 0.000704871 Jy
! Component: 200  -  total flux cleaned = 0.000691835 Jy
! Total flux subtracted in 200 components = 0.000691835 Jy
! Clean residual min=-0.001515 max=0.001394 Jy/beam
! Clean residual mean=-0.000001 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.0669899 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 73 components and 0.0669899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018822Jy  sigma=0.564508
! Fit after  self-cal, rms=0.018819Jy  sigma=0.564370
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141126 Jy
! Component: 100  -  total flux cleaned = 0.000102254 Jy
! Component: 150  -  total flux cleaned = 5.38835e-05 Jy
! Component: 200  -  total flux cleaned = 3.10394e-05 Jy
! Total flux subtracted in 200 components = 3.10394e-05 Jy
! Clean residual min=-0.001501 max=0.001344 Jy/beam
! Clean residual mean=-0.000001 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.0670209 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 84 components and 0.0670209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018794Jy  sigma=0.563839
! Fit after  self-cal, rms=0.018794Jy  sigma=0.563782
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018794Jy  sigma=0.563782
! Fit after  self-cal, rms=0.018797Jy  sigma=0.563628
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8448 mas, bmaj=2.899 mas, bpa=-1.653 degrees
! Estimated noise=0.526672 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000412662 Jy
! Component: 100  -  total flux cleaned = 0.000555181 Jy
! Component: 150  -  total flux cleaned = 0.000565738 Jy
! Component: 200  -  total flux cleaned = 0.000555822 Jy
! Total flux subtracted in 200 components = 0.000555822 Jy
! Clean residual min=-0.001495 max=0.001316 Jy/beam
! Clean residual mean=-0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.0675767 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 91 components and 0.0675767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018776Jy  sigma=0.563075
! Fit after  self-cal, rms=0.018775Jy  sigma=0.563028
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.5672e-05 Jy
! Component: 100  -  total flux cleaned = 5.40988e-06 Jy
! Component: 150  -  total flux cleaned = -4.02646e-06 Jy
! Component: 200  -  total flux cleaned = -2.23922e-05 Jy
! Total flux subtracted in 200 components = -2.23922e-05 Jy
! Clean residual min=-0.001485 max=0.001284 Jy/beam
! Clean residual mean=-0.000001 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.0675543 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 96 components and 0.0675543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018761Jy  sigma=0.562690
! Fit after  self-cal, rms=0.018761Jy  sigma=0.562661
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018761Jy  sigma=0.562661
! Fit after  self-cal, rms=0.018386Jy  sigma=0.551570
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.991 mas, bmaj=3.171 mas, bpa=-4.816 degrees
! Estimated noise=0.678307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000694614 Jy
! Component: 100  -  total flux cleaned = -0.000897959 Jy
! Component: 150  -  total flux cleaned = -0.00100922 Jy
! Component: 200  -  total flux cleaned = -0.00102971 Jy
! Total flux subtracted in 200 components = -0.00102971 Jy
! Clean residual min=-0.001662 max=0.001450 Jy/beam
! Clean residual mean=-0.000002 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.0665246 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 118 components and 0.0665246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018373Jy  sigma=0.551829
! Fit after  self-cal, rms=0.018371Jy  sigma=0.551766
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.57998e-05 Jy
! Component: 100  -  total flux cleaned = -2.68264e-05 Jy
! Component: 150  -  total flux cleaned = -1.83491e-05 Jy
! Component: 200  -  total flux cleaned = -1.83946e-05 Jy
! Total flux subtracted in 200 components = -1.83946e-05 Jy
! Clean residual min=-0.001644 max=0.001427 Jy/beam
! Clean residual mean=-0.000002 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.0665062 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 127 components and 0.0665062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018366Jy  sigma=0.551825
! Fit after  self-cal, rms=0.018367Jy  sigma=0.551791
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8451 mas, bmaj=2.9 mas, bpa=-1.67 degrees
! Estimated noise=0.521667 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8451 x 2.9 at -1.67 degrees (North through East)
! Clean map  min=-0.0010925  max=0.046354 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7107 mas, bmaj=2.75 mas, bpa=-2.676 degrees
! Estimated noise=0.742126 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0369151 Jy
! Component: 100  -  total flux cleaned = 0.0465134 Jy
! Component: 150  -  total flux cleaned = 0.0518884 Jy
! Component: 200  -  total flux cleaned = 0.055638 Jy
! Total flux subtracted in 200 components = 0.055638 Jy
! Clean residual min=-0.002101 max=0.002450 Jy/beam
! Clean residual mean=-0.000001 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.0556381 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0556381 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8451 mas, bmaj=2.9 mas, bpa=-1.67 degrees
! Estimated noise=0.521667 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00409969 Jy
! Component: 100  -  total flux cleaned = 0.00664989 Jy
! Component: 150  -  total flux cleaned = 0.00837665 Jy
! Component: 200  -  total flux cleaned = 0.00936264 Jy
! Total flux subtracted in 200 components = 0.00936264 Jy
! Clean residual min=-0.001334 max=0.001385 Jy/beam
! Clean residual mean=-0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.0650007 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 42 components and 0.0650007 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.991 mas, bmaj=3.171 mas, bpa=-4.816 degrees
! Estimated noise=0.678307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122594 Jy
! Component: 100  -  total flux cleaned = 0.00170976 Jy
! Component: 150  -  total flux cleaned = 0.00171264 Jy
! Component: 200  -  total flux cleaned = 0.00169624 Jy
! Total flux subtracted in 200 components = 0.00169624 Jy
! Clean residual min=-0.001754 max=0.001442 Jy/beam
! Clean residual mean=-0.000002 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.0666969 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.38834e-05 Jy
! Component: 100  -  total flux cleaned = -6.85996e-05 Jy
! Component: 150  -  total flux cleaned = -7.9557e-05 Jy
! Component: 200  -  total flux cleaned = -9.98043e-05 Jy
! Total flux subtracted in 200 components = -9.98043e-05 Jy
! Clean residual min=-0.001700 max=0.001445 Jy/beam
! Clean residual mean=-0.000002 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.0665971 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 77 components and 0.0665971 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8451 mas, bmaj=2.9 mas, bpa=-1.67 degrees
! Estimated noise=0.521667 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000217269 Jy
! Component: 100  -  total flux cleaned = 0.000305355 Jy
! Component: 150  -  total flux cleaned = 0.000380928 Jy
! Component: 200  -  total flux cleaned = 0.000419977 Jy
! Total flux subtracted in 200 components = 0.000419977 Jy
! Clean residual min=-0.001244 max=0.001351 Jy/beam
! Clean residual mean=-0.000001 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0670171 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 96 components and 0.0670171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018387Jy  sigma=0.551882
! Fit after  self-cal, rms=0.018386Jy  sigma=0.551636
wmodel /d2/scr/pima/bp177g_uvs/J1308+5530_X_map.mod
! Writing 96 model components to file: /d2/scr/pima/bp177g_uvs/J1308+5530_X_map.mod
wobs /d2/scr/pima/bp177g_uvs/J1308+5530_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177g_uvs/J1308+5530_X_uvs.fits
wwins /d2/scr/pima/bp177g_uvs/J1308+5530_X_map.win
! wwins: Wrote 3 windows to /d2/scr/pima/bp177g_uvs/J1308+5530_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.93821e-05 Jy
! Component: 100  -  total flux cleaned = 6.86472e-05 Jy
! Component: 150  -  total flux cleaned = -6.55933e-06 Jy
! Component: 200  -  total flux cleaned = -4.23799e-05 Jy
! Component: 250  -  total flux cleaned = -7.67796e-05 Jy
! Component: 300  -  total flux cleaned = -0.00010995 Jy
! Component: 350  -  total flux cleaned = -9.43484e-05 Jy
! Component: 400  -  total flux cleaned = -9.4811e-05 Jy
! Component: 450  -  total flux cleaned = -6.43182e-05 Jy
! Component: 500  -  total flux cleaned = 9.54515e-06 Jy
! Component: 550  -  total flux cleaned = 3.84786e-05 Jy
! Component: 600  -  total flux cleaned = 0.000122266 Jy
! Component: 650  -  total flux cleaned = 0.000190499 Jy
! Component: 700  -  total flux cleaned = 0.000270471 Jy
! Component: 750  -  total flux cleaned = 0.000335396 Jy
! Component: 800  -  total flux cleaned = 0.000335248 Jy
! Component: 850  -  total flux cleaned = 0.000410609 Jy
! Component: 900  -  total flux cleaned = 0.000496336 Jy
! Component: 950  -  total flux cleaned = 0.00050823 Jy
! Component: 1000  -  total flux cleaned = 0.000579051 Jy
! Component: 1050  -  total flux cleaned = 0.000648431 Jy
! Component: 1100  -  total flux cleaned = 0.000705105 Jy
! Component: 1150  -  total flux cleaned = 0.000749905 Jy
! Component: 1200  -  total flux cleaned = 0.000772053 Jy
! Component: 1250  -  total flux cleaned = 0.000804726 Jy
! Component: 1300  -  total flux cleaned = 0.000879319 Jy
! Component: 1350  -  total flux cleaned = 0.000942206 Jy
! Component: 1400  -  total flux cleaned = 0.000983255 Jy
! Component: 1450  -  total flux cleaned = 0.000993425 Jy
! Component: 1500  -  total flux cleaned = 0.00101348 Jy
! Component: 1550  -  total flux cleaned = 0.00101355 Jy
! Component: 1600  -  total flux cleaned = 0.00102342 Jy
! Component: 1650  -  total flux cleaned = 0.00104279 Jy
! Component: 1700  -  total flux cleaned = 0.00108093 Jy
! Component: 1750  -  total flux cleaned = 0.00110912 Jy
! Component: 1800  -  total flux cleaned = 0.00110897 Jy
! Component: 1850  -  total flux cleaned = 0.00113648 Jy
! Component: 1900  -  total flux cleaned = 0.00114547 Jy
! Component: 1950  -  total flux cleaned = 0.0011273 Jy
! Component: 2000  -  total flux cleaned = 0.00111851 Jy
! Component: 2050  -  total flux cleaned = 0.00112757 Jy
! Component: 2100  -  total flux cleaned = 0.00111889 Jy
! Component: 2150  -  total flux cleaned = 0.0011189 Jy
! Component: 2200  -  total flux cleaned = 0.00111026 Jy
! Component: 2250  -  total flux cleaned = 0.00110178 Jy
! Component: 2300  -  total flux cleaned = 0.00106807 Jy
! Component: 2350  -  total flux cleaned = 0.00106807 Jy
! Component: 2400  -  total flux cleaned = 0.00106802 Jy
! Component: 2450  -  total flux cleaned = 0.00105165 Jy
! Component: 2500  -  total flux cleaned = 0.00104352 Jy
! Component: 2550  -  total flux cleaned = 0.00101943 Jy
! Component: 2600  -  total flux cleaned = 0.00101154 Jy
! Component: 2650  -  total flux cleaned = 0.00100358 Jy
! Component: 2700  -  total flux cleaned = 0.00100351 Jy
! Component: 2750  -  total flux cleaned = 0.000987954 Jy
! Component: 2800  -  total flux cleaned = 0.000964875 Jy
! Component: 2850  -  total flux cleaned = 0.000941916 Jy
! Component: 2900  -  total flux cleaned = 0.00094949 Jy
! Component: 2950  -  total flux cleaned = 0.000941972 Jy
! Component: 3000  -  total flux cleaned = 0.00094192 Jy
! Component: 3050  -  total flux cleaned = 0.000912335 Jy
! Component: 3100  -  total flux cleaned = 0.000912414 Jy
! Component: 3150  -  total flux cleaned = 0.000912476 Jy
! Component: 3200  -  total flux cleaned = 0.000898098 Jy
! Component: 3250  -  total flux cleaned = 0.000890919 Jy
! Component: 3300  -  total flux cleaned = 0.000890906 Jy
! Component: 3350  -  total flux cleaned = 0.000855474 Jy
! Component: 3400  -  total flux cleaned = 0.000841394 Jy
! Component: 3450  -  total flux cleaned = 0.000827484 Jy
! Component: 3500  -  total flux cleaned = 0.000834364 Jy
! Component: 3550  -  total flux cleaned = 0.000792897 Jy
! Component: 3600  -  total flux cleaned = 0.000786016 Jy
! Component: 3650  -  total flux cleaned = 0.000758763 Jy
! Component: 3700  -  total flux cleaned = 0.00075197 Jy
! Component: 3750  -  total flux cleaned = 0.00073172 Jy
! Component: 3800  -  total flux cleaned = 0.00072498 Jy
! Component: 3850  -  total flux cleaned = 0.000704844 Jy
! Component: 3900  -  total flux cleaned = 0.000698168 Jy
! Component: 3950  -  total flux cleaned = 0.000671595 Jy
! Component: 4000  -  total flux cleaned = 0.000671607 Jy
! Component: 4050  -  total flux cleaned = 0.000645223 Jy
! Total flux subtracted in 4096 components = 0.000625497 Jy
! Clean residual min=-0.000431 max=0.000381 Jy/beam
! Clean residual mean=-0.000000 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.0676426 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 399 components and 0.0676426 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177g_uvs/J1308+5530_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8451 x 2.9 at -1.67 degrees (North through East)
! Clean map  min=-0.00069781  max=0.04611 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177g_uvs/J1308+5530_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0461103 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000110233 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.717191 0.717191 1.43438 2.86876 5.73753 11.4751 22.9501 45.9002 91.8004
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.046 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  418.298 
quit
! Quitting program
! Log file /d2/scr/pima/bp177g_uvs/J1308+5530_X_uvs.log closed on Thu Mar  6 00:15:45 2014