! Started logfile: /d2/scr/pima/bp177g_uvs/J1308+5530_C_uvs.log on Thu Mar  6 00:34:00 2014
obs /d2/scr/pima/bp177g_uvs/J1308+5530_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177g_uvs/J1308+5530_C_uva.fits
! AN table 1: 9 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.42963 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1308+5530
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1392 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177g_uvs/J1308+5530_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004312Jy  sigma=46.848268
! Fit after  self-cal, rms=0.949990Jy  sigma=44.332963
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.238 mas, bmaj=4.709 mas, bpa=-2.795 degrees
! Estimated noise=0.585007 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0364118 Jy
! Component: 100  -  total flux cleaned = 0.0467753 Jy
! Total flux subtracted in 100 components = 0.0467753 Jy
! Clean residual min=-0.002580 max=0.004858 Jy/beam
! Clean residual mean=-0.000001 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.0467753 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0467753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021114Jy  sigma=0.805715
! Fit after  self-cal, rms=0.020407Jy  sigma=0.782166
! Inverting map 
! Added new window around map position (1.2, 0.3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00550178 Jy
! Component: 100  -  total flux cleaned = 0.0083561 Jy
! Total flux subtracted in 100 components = 0.0083561 Jy
! Clean residual min=-0.001983 max=0.002373 Jy/beam
! Clean residual mean=-0.000001 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.0551314 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.0551314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018421Jy  sigma=0.679374
! Fit after  self-cal, rms=0.018391Jy  sigma=0.678086
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.505 mas, bmaj=4.935 mas, bpa=-2.128 degrees
! Estimated noise=0.422181 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267659 Jy
! Component: 100  -  total flux cleaned = 0.00437599 Jy
! Component: 150  -  total flux cleaned = 0.00558622 Jy
! Component: 200  -  total flux cleaned = 0.00639307 Jy
! Total flux subtracted in 200 components = 0.00639307 Jy
! Clean residual min=-0.001663 max=0.002594 Jy/beam
! Clean residual mean=-0.000004 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.0615245 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 23 components and 0.0615245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017817Jy  sigma=0.654042
! Fit after  self-cal, rms=0.017812Jy  sigma=0.653663
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.505 x 4.935 at -2.128 degrees (North through East)
! Clean map  min=-0.0016247  max=0.049834 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.98     KP        0.86     
!   LA        1.12     MK        0.99     NL        1.16     OV        0.97     
!   PT        0.86     SC        1.02     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.10     HN        0.92     KP        0.97     
!   LA        1.13     MK        0.97     NL        1.06     OV        0.95     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        0.97     KP        0.94     
!   LA        1.20     MK        1.03     NL        1.16     OV        0.91     
!   PT        0.93     SC        1.06     
! 
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.90     HN        0.96     KP        0.89     
!   LA        1.14     MK        0.96     NL        1.10     OV        0.90     
!   PT        0.91     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.00     HN        1.01     KP        0.93     
!   LA        1.08     MK        0.99     NL        1.19     OV        0.95     
!   PT        0.92     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.017812Jy  sigma=0.653663
! Fit after  self-cal, rms=0.017166Jy  sigma=0.621358
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.498 mas, bmaj=4.919 mas, bpa=-1.643 degrees
! Estimated noise=0.4292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000109621 Jy
! Component: 100  -  total flux cleaned = -0.000207231 Jy
! Component: 150  -  total flux cleaned = -0.000240609 Jy
! Component: 200  -  total flux cleaned = -0.000250269 Jy
! Total flux subtracted in 200 components = -0.000250269 Jy
! Clean residual min=-0.001266 max=0.001482 Jy/beam
! Clean residual mean=-0.000003 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.0612742 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 37 components and 0.0612742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017142Jy  sigma=0.620432
! Fit after  self-cal, rms=0.017148Jy  sigma=0.620271
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017148Jy  sigma=0.620271
! Fit after  self-cal, rms=0.017137Jy  sigma=0.620226
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.497 mas, bmaj=4.923 mas, bpa=-1.633 degrees
! Estimated noise=0.428578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.12541e-05 Jy
! Component: 100  -  total flux cleaned = -7.1771e-05 Jy
! Component: 150  -  total flux cleaned = -6.43613e-05 Jy
! Component: 200  -  total flux cleaned = -5.73893e-05 Jy
! Total flux subtracted in 200 components = -5.73893e-05 Jy
! Clean residual min=-0.001266 max=0.001474 Jy/beam
! Clean residual mean=-0.000003 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.0612168 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 41 components and 0.0612168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017129Jy  sigma=0.619878
! Fit after  self-cal, rms=0.017129Jy  sigma=0.619864
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.51489e-05 Jy
! Component: 100  -  total flux cleaned = 3.46263e-05 Jy
! Component: 150  -  total flux cleaned = 3.45909e-05 Jy
! Component: 200  -  total flux cleaned = 4.0654e-05 Jy
! Total flux subtracted in 200 components = 4.0654e-05 Jy
! Clean residual min=-0.001263 max=0.001472 Jy/beam
! Clean residual mean=-0.000003 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.0612575 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 48 components and 0.0612575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017123Jy  sigma=0.619667
! Fit after  self-cal, rms=0.017123Jy  sigma=0.619660
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017123Jy  sigma=0.619660
! Fit after  self-cal, rms=0.017107Jy  sigma=0.619639
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.496 mas, bmaj=4.924 mas, bpa=-1.621 degrees
! Estimated noise=0.428033 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.12188e-05 Jy
! Component: 100  -  total flux cleaned = -1.90191e-05 Jy
! Component: 150  -  total flux cleaned = -1.30163e-05 Jy
! Component: 200  -  total flux cleaned = -1.29647e-05 Jy
! Total flux subtracted in 200 components = -1.29647e-05 Jy
! Clean residual min=-0.001260 max=0.001469 Jy/beam
! Clean residual mean=-0.000003 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.0612445 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 48 components and 0.0612445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017103Jy  sigma=0.619455
! Fit after  self-cal, rms=0.017103Jy  sigma=0.619452
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.19793e-05 Jy
! Component: 100  -  total flux cleaned = 1.21487e-05 Jy
! Component: 150  -  total flux cleaned = 1.75828e-05 Jy
! Component: 200  -  total flux cleaned = 2.2818e-05 Jy
! Total flux subtracted in 200 components = 2.2818e-05 Jy
! Clean residual min=-0.001259 max=0.001468 Jy/beam
! Clean residual mean=-0.000003 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.0612673 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 50 components and 0.0612673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017098Jy  sigma=0.619327
! Fit after  self-cal, rms=0.017099Jy  sigma=0.619325
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017099Jy  sigma=0.619325
! Fit after  self-cal, rms=0.017086Jy  sigma=0.619314
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.524 mas, bmaj=5.391 mas, bpa=-3.269 degrees
! Estimated noise=0.553632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000450334 Jy
! Component: 100  -  total flux cleaned = 0.000420189 Jy
! Component: 150  -  total flux cleaned = 0.000409018 Jy
! Component: 200  -  total flux cleaned = 0.000399202 Jy
! Total flux subtracted in 200 components = 0.000399202 Jy
! Clean residual min=-0.001947 max=0.002036 Jy/beam
! Clean residual mean=-0.000008 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.0616665 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 54 components and 0.0616665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017086Jy  sigma=0.620409
! Fit after  self-cal, rms=0.017083Jy  sigma=0.620347
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.46332e-05 Jy
! Component: 100  -  total flux cleaned = 3.41288e-05 Jy
! Component: 150  -  total flux cleaned = 4.2364e-05 Jy
! Component: 200  -  total flux cleaned = 5.78485e-05 Jy
! Total flux subtracted in 200 components = 5.78485e-05 Jy
! Clean residual min=-0.001931 max=0.002012 Jy/beam
! Clean residual mean=-0.000008 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.0617244 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 58 components and 0.0617244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017091Jy  sigma=0.621152
! Fit after  self-cal, rms=0.017090Jy  sigma=0.621133
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.496 mas, bmaj=4.925 mas, bpa=-1.613 degrees
! Estimated noise=0.427642 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.496 x 4.925 at -1.613 degrees (North through East)
! Clean map  min=-0.0012231  max=0.04903 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.239 mas, bmaj=4.705 mas, bpa=-2.795 degrees
! Estimated noise=0.583551 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0362139 Jy
! Component: 100  -  total flux cleaned = 0.0469508 Jy
! Component: 150  -  total flux cleaned = 0.0523571 Jy
! Component: 200  -  total flux cleaned = 0.0551318 Jy
! Total flux subtracted in 200 components = 0.0551318 Jy
! Clean residual min=-0.001835 max=0.001681 Jy/beam
! Clean residual mean=-0.000001 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.0551318 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0551318 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.496 mas, bmaj=4.925 mas, bpa=-1.613 degrees
! Estimated noise=0.427642 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.3, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00258079 Jy
! Component: 100  -  total flux cleaned = 0.00413282 Jy
! Component: 150  -  total flux cleaned = 0.00521233 Jy
! Component: 200  -  total flux cleaned = 0.00598569 Jy
! Total flux subtracted in 200 components = 0.00598569 Jy
! Clean residual min=-0.001224 max=0.001498 Jy/beam
! Clean residual mean=-0.000003 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.0611175 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 40 components and 0.0611175 Jy
! Inverting map 
! Added new window around map position (-24, -24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138749 Jy
! Component: 100  -  total flux cleaned = 0.00220798 Jy
! Component: 150  -  total flux cleaned = 0.0027947 Jy
! Component: 200  -  total flux cleaned = 0.00325273 Jy
! Total flux subtracted in 200 components = 0.00325273 Jy
! Clean residual min=-0.001146 max=0.001110 Jy/beam
! Clean residual mean=-0.000002 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.0643702 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 65 components and 0.0643702 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.524 mas, bmaj=5.391 mas, bpa=-3.269 degrees
! Estimated noise=0.553632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000666664 Jy
! Component: 100  -  total flux cleaned = 0.000817169 Jy
! Component: 150  -  total flux cleaned = 0.000893634 Jy
! Component: 200  -  total flux cleaned = 0.000946018 Jy
! Total flux subtracted in 200 components = 0.000946018 Jy
! Clean residual min=-0.001737 max=0.001532 Jy/beam
! Clean residual mean=-0.000005 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.0653162 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.56581e-05 Jy
! Component: 100  -  total flux cleaned = 9.49631e-05 Jy
! Component: 150  -  total flux cleaned = 0.000120951 Jy
! Component: 200  -  total flux cleaned = 0.000145997 Jy
! Total flux subtracted in 200 components = 0.000145997 Jy
! Clean residual min=-0.001685 max=0.001503 Jy/beam
! Clean residual mean=-0.000005 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.0654622 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 92 components and 0.0654622 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.496 mas, bmaj=4.925 mas, bpa=-1.613 degrees
! Estimated noise=0.427642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.72073e-05 Jy
! Component: 100  -  total flux cleaned = -6.42461e-05 Jy
! Component: 150  -  total flux cleaned = -2.85954e-05 Jy
! Component: 200  -  total flux cleaned = -7.02325e-06 Jy
! Total flux subtracted in 200 components = -7.02325e-06 Jy
! Clean residual min=-0.001105 max=0.001059 Jy/beam
! Clean residual mean=-0.000002 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.0654552 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 114 components and 0.0654552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016776Jy  sigma=0.611557
! Fit after  self-cal, rms=0.016755Jy  sigma=0.609926
wmodel /d2/scr/pima/bp177g_uvs/J1308+5530_C_map.mod
! Writing 114 model components to file: /d2/scr/pima/bp177g_uvs/J1308+5530_C_map.mod
wobs /d2/scr/pima/bp177g_uvs/J1308+5530_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177g_uvs/J1308+5530_C_uvs.fits
wwins /d2/scr/pima/bp177g_uvs/J1308+5530_C_map.win
! wwins: Wrote 4 windows to /d2/scr/pima/bp177g_uvs/J1308+5530_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108381 Jy
! Component: 100  -  total flux cleaned = 3.76214e-05 Jy
! Component: 150  -  total flux cleaned = 0.00014136 Jy
! Component: 200  -  total flux cleaned = 0.000240915 Jy
! Component: 250  -  total flux cleaned = 0.00030521 Jy
! Component: 300  -  total flux cleaned = 0.000320825 Jy
! Component: 350  -  total flux cleaned = 0.000366175 Jy
! Component: 400  -  total flux cleaned = 0.000351315 Jy
! Component: 450  -  total flux cleaned = 0.000351637 Jy
! Component: 500  -  total flux cleaned = 0.000393641 Jy
! Component: 550  -  total flux cleaned = 0.000434248 Jy
! Component: 600  -  total flux cleaned = 0.000434393 Jy
! Component: 650  -  total flux cleaned = 0.000512923 Jy
! Component: 700  -  total flux cleaned = 0.00056412 Jy
! Component: 750  -  total flux cleaned = 0.00062686 Jy
! Component: 800  -  total flux cleaned = 0.000651415 Jy
! Component: 850  -  total flux cleaned = 0.000651403 Jy
! Component: 900  -  total flux cleaned = 0.000699376 Jy
! Component: 950  -  total flux cleaned = 0.000711134 Jy
! Component: 1000  -  total flux cleaned = 0.00073439 Jy
! Component: 1050  -  total flux cleaned = 0.000768759 Jy
! Component: 1100  -  total flux cleaned = 0.000802406 Jy
! Component: 1150  -  total flux cleaned = 0.000846648 Jy
! Component: 1200  -  total flux cleaned = 0.000868449 Jy
! Component: 1250  -  total flux cleaned = 0.000889981 Jy
! Component: 1300  -  total flux cleaned = 0.00095339 Jy
! Component: 1350  -  total flux cleaned = 0.000921978 Jy
! Component: 1400  -  total flux cleaned = 0.000942632 Jy
! Component: 1450  -  total flux cleaned = 0.000932545 Jy
! Component: 1500  -  total flux cleaned = 0.000942617 Jy
! Component: 1550  -  total flux cleaned = 0.000972211 Jy
! Component: 1600  -  total flux cleaned = 0.000981912 Jy
! Component: 1650  -  total flux cleaned = 0.000981697 Jy
! Component: 1700  -  total flux cleaned = 0.000972139 Jy
! Component: 1750  -  total flux cleaned = 0.00096288 Jy
! Component: 1800  -  total flux cleaned = 0.000990812 Jy
! Component: 1850  -  total flux cleaned = 0.000963486 Jy
! Component: 1900  -  total flux cleaned = 0.000963558 Jy
! Component: 1950  -  total flux cleaned = 0.000963666 Jy
! Component: 2000  -  total flux cleaned = 0.000963654 Jy
! Component: 2050  -  total flux cleaned = 0.000989883 Jy
! Component: 2100  -  total flux cleaned = 0.0009811 Jy
! Component: 2150  -  total flux cleaned = 0.000998084 Jy
! Component: 2200  -  total flux cleaned = 0.00102336 Jy
! Component: 2250  -  total flux cleaned = 0.00103169 Jy
! Component: 2300  -  total flux cleaned = 0.00104825 Jy
! Component: 2350  -  total flux cleaned = 0.00104833 Jy
! Component: 2400  -  total flux cleaned = 0.00106461 Jy
! Component: 2450  -  total flux cleaned = 0.00108061 Jy
! Component: 2500  -  total flux cleaned = 0.00109639 Jy
! Component: 2550  -  total flux cleaned = 0.00109648 Jy
! Component: 2600  -  total flux cleaned = 0.00110428 Jy
! Component: 2650  -  total flux cleaned = 0.00115048 Jy
! Component: 2700  -  total flux cleaned = 0.00113521 Jy
! Component: 2750  -  total flux cleaned = 0.00117303 Jy
! Component: 2800  -  total flux cleaned = 0.00120294 Jy
! Component: 2850  -  total flux cleaned = 0.00121776 Jy
! Component: 2900  -  total flux cleaned = 0.00122508 Jy
! Component: 2950  -  total flux cleaned = 0.00123239 Jy
! Component: 3000  -  total flux cleaned = 0.00122521 Jy
! Component: 3050  -  total flux cleaned = 0.00123959 Jy
! Component: 3100  -  total flux cleaned = 0.00126805 Jy
! Component: 3150  -  total flux cleaned = 0.00126804 Jy
! Component: 3200  -  total flux cleaned = 0.00124001 Jy
! Component: 3250  -  total flux cleaned = 0.00126093 Jy
! Component: 3300  -  total flux cleaned = 0.00124715 Jy
! Component: 3350  -  total flux cleaned = 0.00126768 Jy
! Component: 3400  -  total flux cleaned = 0.00126096 Jy
! Component: 3450  -  total flux cleaned = 0.00129468 Jy
! Component: 3500  -  total flux cleaned = 0.00130805 Jy
! Component: 3550  -  total flux cleaned = 0.001328 Jy
! Component: 3600  -  total flux cleaned = 0.00132801 Jy
! Component: 3650  -  total flux cleaned = 0.00131493 Jy
! Component: 3700  -  total flux cleaned = 0.00132144 Jy
! Component: 3750  -  total flux cleaned = 0.00135376 Jy
! Component: 3800  -  total flux cleaned = 0.00136655 Jy
! Component: 3850  -  total flux cleaned = 0.00137927 Jy
! Component: 3900  -  total flux cleaned = 0.00136028 Jy
! Component: 3950  -  total flux cleaned = 0.00137292 Jy
! Component: 4000  -  total flux cleaned = 0.00137297 Jy
! Component: 4050  -  total flux cleaned = 0.00139164 Jy
! Total flux subtracted in 4096 components = 0.00141016 Jy
! Clean residual min=-0.000453 max=0.000371 Jy/beam
! Clean residual mean=-0.000000 rms=0.000112 Jy/beam
! Combined flux in latest and established models = 0.0668654 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 410 components and 0.0668653 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177g_uvs/J1308+5530_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.496 x 4.925 at -1.613 degrees (North through East)
! Clean map  min=-0.00099229  max=0.047766 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177g_uvs/J1308+5530_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0477661 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000112288 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.705236 0.705236 1.41047 2.82094 5.64188 11.2838 22.5675 45.1351 90.2701
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.047 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  425.389 
quit
! Quitting program
! Log file /d2/scr/pima/bp177g_uvs/J1308+5530_C_uvs.log closed on Thu Mar  6 00:34:05 2014