! Started logfile: /d2/scr/pima/bp177e_uvs/J1945-3048_X_uvs.log on Sat Mar 22 21:10:14 2014
obs /d2/scr/pima/bp177e_uvs/J1945-3048_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177e_uvs/J1945-3048_X_uva.fits
! AN table 1: 5 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.677778 visibilities/baseline/integration-bin.
! Found source: J1945-3048
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 976 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177e_uvs/J1945-3048_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001419Jy  sigma=28.749880
! Fit after  self-cal, rms=0.918229Jy  sigma=26.261297
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.895 mas, bmaj=4.782 mas, bpa=12.08 degrees
! Estimated noise=1.06456 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0576059 Jy
! Component: 100  -  total flux cleaned = 0.0821747 Jy
! Total flux subtracted in 100 components = 0.0821747 Jy
! Clean residual min=-0.007120 max=0.014868 Jy/beam
! Clean residual mean=0.000022 rms=0.002389 Jy/beam
! Combined flux in latest and established models = 0.0821747 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0821747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037772Jy  sigma=1.027826
! Fit after  self-cal, rms=0.037616Jy  sigma=1.025066
! Inverting map 
! Added new window around map position (-11.6, 25.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146342 Jy
! Component: 100  -  total flux cleaned = 0.0234304 Jy
! Total flux subtracted in 100 components = 0.0234304 Jy
! Clean residual min=-0.005196 max=0.007117 Jy/beam
! Clean residual mean=0.000005 rms=0.001469 Jy/beam
! Combined flux in latest and established models = 0.105605 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 25 components and 0.105605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030180Jy  sigma=0.746263
! Fit after  self-cal, rms=0.030091Jy  sigma=0.742913
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=5.032 mas, bpa=11.76 degrees
! Estimated noise=0.842013 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00827278 Jy
! Component: 100  -  total flux cleaned = 0.0134252 Jy
! Component: 150  -  total flux cleaned = 0.0168112 Jy
! Component: 200  -  total flux cleaned = 0.0190571 Jy
! Total flux subtracted in 200 components = 0.0190571 Jy
! Clean residual min=-0.003865 max=0.004113 Jy/beam
! Clean residual mean=-0.000011 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.124662 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 69 components and 0.124662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027636Jy  sigma=0.650948
! Fit after  self-cal, rms=0.027580Jy  sigma=0.649143
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.087 x 5.032 at 11.76 degrees (North through East)
! Clean map  min=-0.0035635  max=0.074383 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.06     HN        1.02     KP        0.91     
!   LA        1.01     NL        0.96     OV        1.03     PT        0.88     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.97     HN        0.98     KP        0.91     
!   LA        0.91     NL        1.01     OV        0.93     PT        0.89     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        1.06     HN        1.04     KP        1.09     
!   LA        0.90     NL        1.00     OV        1.04     PT        0.90     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        1.19     KP        0.89     
!   LA        0.95     NL        0.99     OV        1.01     PT        0.95     
!   SC        1.04     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.00     HN        1.07     KP        1.04     
!   LA        0.95     NL        0.97     OV        0.99     PT        0.93     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.027580Jy  sigma=0.649143
! Fit after  self-cal, rms=0.026365Jy  sigma=0.613283
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.111 mas, bmaj=5.027 mas, bpa=11.67 degrees
! Estimated noise=0.835738 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128331 Jy
! Component: 100  -  total flux cleaned = -0.0012792 Jy
! Component: 150  -  total flux cleaned = -0.0012448 Jy
! Component: 200  -  total flux cleaned = -0.00118507 Jy
! Total flux subtracted in 200 components = -0.00118507 Jy
! Clean residual min=-0.002997 max=0.002875 Jy/beam
! Clean residual mean=-0.000005 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.123477 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 76 components and 0.123477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026255Jy  sigma=0.606774
! Fit after  self-cal, rms=0.026264Jy  sigma=0.606545
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026264Jy  sigma=0.606545
! Fit after  self-cal, rms=0.025865Jy  sigma=0.605143
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.11 mas, bmaj=5.023 mas, bpa=11.7 degrees
! Estimated noise=0.824667 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000796813 Jy
! Component: 100  -  total flux cleaned = -0.000796873 Jy
! Component: 150  -  total flux cleaned = -0.000770879 Jy
! Component: 200  -  total flux cleaned = -0.000745488 Jy
! Total flux subtracted in 200 components = -0.000745488 Jy
! Clean residual min=-0.002787 max=0.002818 Jy/beam
! Clean residual mean=-0.000005 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.122732 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 87 components and 0.122732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025795Jy  sigma=0.601801
! Fit after  self-cal, rms=0.025810Jy  sigma=0.601683
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111839 Jy
! Component: 100  -  total flux cleaned = 0.000161115 Jy
! Component: 150  -  total flux cleaned = 0.00018471 Jy
! Component: 200  -  total flux cleaned = 0.000206801 Jy
! Total flux subtracted in 200 components = 0.000206801 Jy
! Clean residual min=-0.002785 max=0.002781 Jy/beam
! Clean residual mean=-0.000005 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.122938 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 94 components and 0.122938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025766Jy  sigma=0.600377
! Fit after  self-cal, rms=0.025778Jy  sigma=0.600309
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025778Jy  sigma=0.600309
! Fit after  self-cal, rms=0.025759Jy  sigma=0.594889
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.108 mas, bmaj=5.037 mas, bpa=11.78 degrees
! Estimated noise=0.822416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00024641 Jy
! Component: 100  -  total flux cleaned = -0.000320167 Jy
! Component: 150  -  total flux cleaned = -0.000320414 Jy
! Component: 200  -  total flux cleaned = -0.000320694 Jy
! Total flux subtracted in 200 components = -0.000320694 Jy
! Clean residual min=-0.002578 max=0.002677 Jy/beam
! Clean residual mean=-0.000004 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.122618 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 98 components and 0.122618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025709Jy  sigma=0.593643
! Fit after  self-cal, rms=0.025726Jy  sigma=0.593550
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.10213e-05 Jy
! Component: 100  -  total flux cleaned = 6.07437e-05 Jy
! Component: 150  -  total flux cleaned = 6.10444e-05 Jy
! Component: 200  -  total flux cleaned = 7.99793e-05 Jy
! Total flux subtracted in 200 components = 7.99793e-05 Jy
! Clean residual min=-0.002523 max=0.002661 Jy/beam
! Clean residual mean=-0.000004 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.122698 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 104 components and 0.122698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025691Jy  sigma=0.592715
! Fit after  self-cal, rms=0.025700Jy  sigma=0.592667
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025700Jy  sigma=0.592667
! Fit after  self-cal, rms=0.025645Jy  sigma=0.592438
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.349 mas, bmaj=6.635 mas, bpa=2.562 degrees
! Estimated noise=0.947211 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000146686 Jy
! Component: 100  -  total flux cleaned = -0.000146554 Jy
! Component: 150  -  total flux cleaned = -0.000129972 Jy
! Component: 200  -  total flux cleaned = -0.000113772 Jy
! Total flux subtracted in 200 components = -0.000113772 Jy
! Clean residual min=-0.002242 max=0.002749 Jy/beam
! Clean residual mean=-0.000007 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.122584 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 112 components and 0.122584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025620Jy  sigma=0.592566
! Fit after  self-cal, rms=0.025641Jy  sigma=0.592303
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.14652e-05 Jy
! Component: 100  -  total flux cleaned = 3.74061e-05 Jy
! Component: 150  -  total flux cleaned = 5.24343e-05 Jy
! Component: 200  -  total flux cleaned = 8.22425e-05 Jy
! Total flux subtracted in 200 components = 8.22425e-05 Jy
! Clean residual min=-0.002243 max=0.002744 Jy/beam
! Clean residual mean=-0.000007 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.122666 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 114 components and 0.122666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025623Jy  sigma=0.592586
! Fit after  self-cal, rms=0.025639Jy  sigma=0.592420
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=5.039 mas, bpa=11.83 degrees
! Estimated noise=0.818734 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.106 x 5.039 at 11.83 degrees (North through East)
! Clean map  min=-0.0022619  max=0.069326 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8886 mas, bmaj=4.864 mas, bpa=12.33 degrees
! Estimated noise=1.06818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0554583 Jy
! Component: 100  -  total flux cleaned = 0.0796634 Jy
! Component: 150  -  total flux cleaned = 0.0933897 Jy
! Component: 200  -  total flux cleaned = 0.101475 Jy
! Total flux subtracted in 200 components = 0.101475 Jy
! Clean residual min=-0.004506 max=0.005626 Jy/beam
! Clean residual mean=0.000007 rms=0.001310 Jy/beam
! Combined flux in latest and established models = 0.101475 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.101475 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=5.039 mas, bpa=11.83 degrees
! Estimated noise=0.818734 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00745769 Jy
! Component: 100  -  total flux cleaned = 0.0120755 Jy
! Component: 150  -  total flux cleaned = 0.0150296 Jy
! Component: 200  -  total flux cleaned = 0.0169601 Jy
! Total flux subtracted in 200 components = 0.0169601 Jy
! Clean residual min=-0.002872 max=0.002939 Jy/beam
! Clean residual mean=-0.000004 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.118435 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 68 components and 0.118435 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.349 mas, bmaj=6.635 mas, bpa=2.562 degrees
! Estimated noise=0.947211 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191077 Jy
! Component: 100  -  total flux cleaned = 0.0023833 Jy
! Component: 150  -  total flux cleaned = 0.00256161 Jy
! Component: 200  -  total flux cleaned = 0.00272276 Jy
! Total flux subtracted in 200 components = 0.00272276 Jy
! Clean residual min=-0.002279 max=0.002843 Jy/beam
! Clean residual mean=-0.000007 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.121158 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011826 Jy
! Component: 100  -  total flux cleaned = 0.000229419 Jy
! Component: 150  -  total flux cleaned = 0.000358458 Jy
! Component: 200  -  total flux cleaned = 0.000456082 Jy
! Total flux subtracted in 200 components = 0.000456082 Jy
! Clean residual min=-0.002213 max=0.002816 Jy/beam
! Clean residual mean=-0.000007 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.121614 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 84 components and 0.121614 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=5.039 mas, bpa=11.83 degrees
! Estimated noise=0.818734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.19295e-05 Jy
! Component: 100  -  total flux cleaned = 7.36264e-05 Jy
! Component: 150  -  total flux cleaned = 0.000223129 Jy
! Component: 200  -  total flux cleaned = 0.000335127 Jy
! Total flux subtracted in 200 components = 0.000335127 Jy
! Clean residual min=-0.002842 max=0.002710 Jy/beam
! Clean residual mean=-0.000004 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.121949 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 95 components and 0.121949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025785Jy  sigma=0.596142
! Fit after  self-cal, rms=0.025774Jy  sigma=0.595979
wmodel /d2/scr/pima/bp177e_uvs/J1945-3048_X_map.mod
! Writing 95 model components to file: /d2/scr/pima/bp177e_uvs/J1945-3048_X_map.mod
wobs /d2/scr/pima/bp177e_uvs/J1945-3048_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177e_uvs/J1945-3048_X_uvs.fits
wwins /d2/scr/pima/bp177e_uvs/J1945-3048_X_map.win
! wwins: Wrote 2 windows to /d2/scr/pima/bp177e_uvs/J1945-3048_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.4813e-05 Jy
! Component: 100  -  total flux cleaned = 0.00030647 Jy
! Component: 150  -  total flux cleaned = 0.000305623 Jy
! Component: 200  -  total flux cleaned = 0.000226406 Jy
! Component: 250  -  total flux cleaned = 0.000189643 Jy
! Component: 300  -  total flux cleaned = 0.00019061 Jy
! Component: 350  -  total flux cleaned = 0.000156396 Jy
! Component: 400  -  total flux cleaned = 0.000124043 Jy
! Component: 450  -  total flux cleaned = 0.00012425 Jy
! Component: 500  -  total flux cleaned = 0.00012438 Jy
! Component: 550  -  total flux cleaned = 0.000124077 Jy
! Component: 600  -  total flux cleaned = 4.11884e-05 Jy
! Component: 650  -  total flux cleaned = -6.48438e-05 Jy
! Component: 700  -  total flux cleaned = -0.00024351 Jy
! Component: 750  -  total flux cleaned = -0.000342162 Jy
! Component: 800  -  total flux cleaned = -0.000438766 Jy
! Component: 850  -  total flux cleaned = -0.000485908 Jy
! Component: 900  -  total flux cleaned = -0.000509132 Jy
! Component: 950  -  total flux cleaned = -0.000620427 Jy
! Component: 1000  -  total flux cleaned = -0.000663669 Jy
! Component: 1050  -  total flux cleaned = -0.000790357 Jy
! Component: 1100  -  total flux cleaned = -0.000851992 Jy
! Component: 1150  -  total flux cleaned = -0.000932253 Jy
! Component: 1200  -  total flux cleaned = -0.000951559 Jy
! Component: 1250  -  total flux cleaned = -0.000932803 Jy
! Component: 1300  -  total flux cleaned = -0.000970566 Jy
! Component: 1350  -  total flux cleaned = -0.000934502 Jy
! Component: 1400  -  total flux cleaned = -0.000971037 Jy
! Component: 1450  -  total flux cleaned = -0.000935665 Jy
! Component: 1500  -  total flux cleaned = -0.000917998 Jy
! Component: 1550  -  total flux cleaned = -0.000832787 Jy
! Component: 1600  -  total flux cleaned = -0.000799543 Jy
! Component: 1650  -  total flux cleaned = -0.000783046 Jy
! Component: 1700  -  total flux cleaned = -0.000750501 Jy
! Component: 1750  -  total flux cleaned = -0.000686855 Jy
! Component: 1800  -  total flux cleaned = -0.000686831 Jy
! Component: 1850  -  total flux cleaned = -0.000609819 Jy
! Component: 1900  -  total flux cleaned = -0.000594678 Jy
! Component: 1950  -  total flux cleaned = -0.000519804 Jy
! Component: 2000  -  total flux cleaned = -0.000475731 Jy
! Component: 2050  -  total flux cleaned = -0.000432129 Jy
! Component: 2100  -  total flux cleaned = -0.000375044 Jy
! Component: 2150  -  total flux cleaned = -0.000332976 Jy
! Component: 2200  -  total flux cleaned = -0.000305589 Jy
! Component: 2250  -  total flux cleaned = -0.000251394 Jy
! Component: 2300  -  total flux cleaned = -0.000211136 Jy
! Component: 2350  -  total flux cleaned = -0.000224413 Jy
! Component: 2400  -  total flux cleaned = -0.000237315 Jy
! Component: 2450  -  total flux cleaned = -0.000224134 Jy
! Component: 2500  -  total flux cleaned = -0.000224006 Jy
! Component: 2550  -  total flux cleaned = -0.000223963 Jy
! Component: 2600  -  total flux cleaned = -0.000211596 Jy
! Component: 2650  -  total flux cleaned = -0.000211908 Jy
! Component: 2700  -  total flux cleaned = -0.000248072 Jy
! Component: 2750  -  total flux cleaned = -0.00021231 Jy
! Component: 2800  -  total flux cleaned = -0.000259242 Jy
! Component: 2850  -  total flux cleaned = -0.000235748 Jy
! Component: 2900  -  total flux cleaned = -0.000201458 Jy
! Component: 2950  -  total flux cleaned = -0.00015618 Jy
! Component: 3000  -  total flux cleaned = -0.000111345 Jy
! Component: 3050  -  total flux cleaned = -6.71708e-05 Jy
! Component: 3100  -  total flux cleaned = -2.30926e-05 Jy
! Component: 3150  -  total flux cleaned = 6.39251e-05 Jy
! Component: 3200  -  total flux cleaned = 0.000128505 Jy
! Component: 3250  -  total flux cleaned = 0.000181782 Jy
! Component: 3300  -  total flux cleaned = 0.000255574 Jy
! Component: 3350  -  total flux cleaned = 0.000297325 Jy
! Component: 3400  -  total flux cleaned = 0.000359353 Jy
! Component: 3450  -  total flux cleaned = 0.000400286 Jy
! Component: 3500  -  total flux cleaned = 0.000430688 Jy
! Component: 3550  -  total flux cleaned = 0.000450798 Jy
! Component: 3600  -  total flux cleaned = 0.000510789 Jy
! Component: 3650  -  total flux cleaned = 0.000510637 Jy
! Component: 3700  -  total flux cleaned = 0.000510651 Jy
! Component: 3750  -  total flux cleaned = 0.000520395 Jy
! Component: 3800  -  total flux cleaned = 0.000491178 Jy
! Component: 3850  -  total flux cleaned = 0.000500867 Jy
! Component: 3900  -  total flux cleaned = 0.000520144 Jy
! Component: 3950  -  total flux cleaned = 0.000520106 Jy
! Component: 4000  -  total flux cleaned = 0.0005391 Jy
! Component: 4050  -  total flux cleaned = 0.000529664 Jy
! Total flux subtracted in 4096 components = 0.00057674 Jy
! Clean residual min=-0.000694 max=0.000519 Jy/beam
! Clean residual mean=-0.000001 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.122526 Jy
keep
! Adding 297 model components to the UV plane model.
! The established model now contains 392 components and 0.122526 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177e_uvs/J1945-3048_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.106 x 5.039 at 11.83 degrees (North through East)
! Clean map  min=-0.0015418  max=0.070757 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177e_uvs/J1945-3048_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0707568 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000161023 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.682718 0.682718 1.36544 2.73087 5.46174 10.9235 21.847 43.6939 87.3878
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.07 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  439.42 
quit
! Quitting program
! Log file /d2/scr/pima/bp177e_uvs/J1945-3048_X_uvs.log closed on Sat Mar 22 21:10:19 2014