! Started logfile: /d2/scr/pima/bp177e_uvs/J1927+6117_C_uvs.log on Sat Mar 22 18:59:38 2014
obs /d2/scr/pima/bp177e_uvs/J1927+6117_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177e_uvs/J1927+6117_C_uva.fits
! AN table 1: 8 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.399306 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1927+6117
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 920 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177e_uvs/J1927+6117_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.267850Jy  sigma=402.754423
! Fit after  self-cal, rms=0.687450Jy  sigma=388.509029
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.909 mas, bmaj=5.185 mas, bpa=29.05 degrees
! Estimated noise=0.312122 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.221086 Jy
! Component: 100  -  total flux cleaned = 0.30451 Jy
! Total flux subtracted in 100 components = 0.30451 Jy
! Clean residual min=-0.056307 max=0.132817 Jy/beam
! Clean residual mean=-0.000125 rms=0.019633 Jy/beam
! Combined flux in latest and established models = 0.30451 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.30451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.644031Jy  sigma=83.369820
! Fit after  self-cal, rms=0.640229Jy  sigma=82.321955
! Inverting map 
! Added new window around map position (4.2, 0.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116239 Jy
! Component: 100  -  total flux cleaned = 0.1885 Jy
! Total flux subtracted in 100 components = 0.1885 Jy
! Clean residual min=-0.053075 max=0.097362 Jy/beam
! Clean residual mean=-0.000071 rms=0.014319 Jy/beam
! Combined flux in latest and established models = 0.493011 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 22 components and 0.493011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.598211Jy  sigma=67.955649
! Fit after  self-cal, rms=0.579265Jy  sigma=66.801741
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.334 mas, bmaj=5.393 mas, bpa=24.54 degrees
! Estimated noise=0.20419 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.5, -0.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102867 Jy
! Component: 100  -  total flux cleaned = 0.177563 Jy
! Component: 150  -  total flux cleaned = 0.236266 Jy
! Component: 200  -  total flux cleaned = 0.26727 Jy
! Total flux subtracted in 200 components = 0.26727 Jy
! Clean residual min=-0.041237 max=0.038711 Jy/beam
! Clean residual mean=-0.000089 rms=0.010706 Jy/beam
! Combined flux in latest and established models = 0.76028 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 42 components and 0.76028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.540126Jy  sigma=52.592882
! Fit after  self-cal, rms=0.505510Jy  sigma=52.328811
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.334 x 5.393 at 24.54 degrees (North through East)
! Clean map  min=-0.04276  max=0.4237 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.505510Jy  sigma=52.328811
! Fit after  self-cal, rms=0.511013Jy  sigma=53.017158
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.349 mas, bmaj=5.437 mas, bpa=24.7 degrees
! Estimated noise=0.204018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.049084 Jy
! Component: 100  -  total flux cleaned = 0.0864688 Jy
! Component: 150  -  total flux cleaned = 0.10756 Jy
! Component: 200  -  total flux cleaned = 0.1256 Jy
! Total flux subtracted in 200 components = 0.1256 Jy
! Clean residual min=-0.035334 max=0.029710 Jy/beam
! Clean residual mean=-0.000082 rms=0.009153 Jy/beam
! Combined flux in latest and established models = 0.88588 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 57 components and 0.88588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.499990Jy  sigma=50.601494
! Fit after  self-cal, rms=0.489694Jy  sigma=50.449159
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.489694Jy  sigma=50.449159
! Fit after  self-cal, rms=0.489694Jy  sigma=50.449159
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.349 mas, bmaj=5.437 mas, bpa=24.7 degrees
! Estimated noise=0.204018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0201301 Jy
! Component: 100  -  total flux cleaned = 0.0342556 Jy
! Component: 150  -  total flux cleaned = 0.0474021 Jy
! Component: 200  -  total flux cleaned = 0.0584399 Jy
! Total flux subtracted in 200 components = 0.0584399 Jy
! Clean residual min=-0.032948 max=0.025555 Jy/beam
! Clean residual mean=-0.000072 rms=0.008627 Jy/beam
! Combined flux in latest and established models = 0.94432 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 75 components and 0.94432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.486070Jy  sigma=49.927601
! Fit after  self-cal, rms=0.482811Jy  sigma=49.879697
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00666005 Jy
! Component: 100  -  total flux cleaned = 0.0161472 Jy
! Component: 150  -  total flux cleaned = 0.0252597 Jy
! Component: 200  -  total flux cleaned = 0.0335999 Jy
! Total flux subtracted in 200 components = 0.0335999 Jy
! Clean residual min=-0.031554 max=0.025820 Jy/beam
! Clean residual mean=-0.000063 rms=0.008380 Jy/beam
! Combined flux in latest and established models = 0.97792 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 93 components and 0.97792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.480722Jy  sigma=49.459636
! Fit after  self-cal, rms=0.479225Jy  sigma=49.449030
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.479225Jy  sigma=49.449030
! Fit after  self-cal, rms=0.479225Jy  sigma=49.449030
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.349 mas, bmaj=5.437 mas, bpa=24.7 degrees
! Estimated noise=0.204018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00432561 Jy
! Component: 100  -  total flux cleaned = 0.0108997 Jy
! Component: 150  -  total flux cleaned = 0.017277 Jy
! Component: 200  -  total flux cleaned = 0.0238422 Jy
! Total flux subtracted in 200 components = 0.0238422 Jy
! Clean residual min=-0.031165 max=0.026077 Jy/beam
! Clean residual mean=-0.000056 rms=0.008237 Jy/beam
! Combined flux in latest and established models = 1.00176 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 104 components and 1.00176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.478126Jy  sigma=49.055563
! Fit after  self-cal, rms=0.477245Jy  sigma=49.049827
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214861 Jy
! Component: 100  -  total flux cleaned = 0.00746111 Jy
! Component: 150  -  total flux cleaned = 0.0120418 Jy
! Component: 200  -  total flux cleaned = 0.0155081 Jy
! Total flux subtracted in 200 components = 0.0155081 Jy
! Clean residual min=-0.030842 max=0.026082 Jy/beam
! Clean residual mean=-0.000052 rms=0.008130 Jy/beam
! Combined flux in latest and established models = 1.01727 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 113 components and 1.01727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.476701Jy  sigma=48.619314
! Fit after  self-cal, rms=0.476046Jy  sigma=48.615055
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.476046Jy  sigma=48.615055
! Fit after  self-cal, rms=0.476046Jy  sigma=48.615055
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.267 mas, bmaj=6.285 mas, bpa=11.95 degrees
! Estimated noise=0.226938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00616447 Jy
! Component: 100  -  total flux cleaned = 0.0115315 Jy
! Component: 150  -  total flux cleaned = 0.0164533 Jy
! Component: 200  -  total flux cleaned = 0.020504 Jy
! Total flux subtracted in 200 components = 0.020504 Jy
! Clean residual min=-0.037909 max=0.029361 Jy/beam
! Clean residual mean=-0.000076 rms=0.009743 Jy/beam
! Combined flux in latest and established models = 1.03777 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 130 components and 1.03777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.475457Jy  sigma=48.950522
! Fit after  self-cal, rms=0.475016Jy  sigma=48.927926
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000277594 Jy
! Component: 100  -  total flux cleaned = 0.00194293 Jy
! Component: 150  -  total flux cleaned = 0.00445493 Jy
! Component: 200  -  total flux cleaned = 0.0067729 Jy
! Total flux subtracted in 200 components = 0.0067729 Jy
! Clean residual min=-0.036323 max=0.029749 Jy/beam
! Clean residual mean=-0.000068 rms=0.009714 Jy/beam
! Combined flux in latest and established models = 1.04455 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 142 components and 1.04455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.474796Jy  sigma=48.822515
! Fit after  self-cal, rms=0.473959Jy  sigma=48.819169
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.349 mas, bmaj=5.437 mas, bpa=24.7 degrees
! Estimated noise=0.204018 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.349 x 5.437 at 24.7 degrees (North through East)
! Clean map  min=-0.064409  max=0.48698 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.913 mas, bmaj=5.186 mas, bpa=29.04 degrees
! Estimated noise=0.307194 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.254015 Jy
! Component: 100  -  total flux cleaned = 0.392105 Jy
! Component: 150  -  total flux cleaned = 0.488375 Jy
! Component: 200  -  total flux cleaned = 0.564592 Jy
! Total flux subtracted in 200 components = 0.564592 Jy
! Clean residual min=-0.041320 max=0.049354 Jy/beam
! Clean residual mean=-0.000056 rms=0.011079 Jy/beam
! Combined flux in latest and established models = 0.564592 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.564592 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.349 mas, bmaj=5.437 mas, bpa=24.7 degrees
! Estimated noise=0.204018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.084734 Jy
! Component: 100  -  total flux cleaned = 0.151496 Jy
! Component: 150  -  total flux cleaned = 0.186843 Jy
! Component: 200  -  total flux cleaned = 0.216863 Jy
! Total flux subtracted in 200 components = 0.216863 Jy
! Clean residual min=-0.042474 max=0.041857 Jy/beam
! Clean residual mean=-0.000094 rms=0.010733 Jy/beam
! Combined flux in latest and established models = 0.781455 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 41 components and 0.781455 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.267 mas, bmaj=6.285 mas, bpa=11.95 degrees
! Estimated noise=0.226938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0582006 Jy
! Component: 100  -  total flux cleaned = 0.0855368 Jy
! Component: 150  -  total flux cleaned = 0.108459 Jy
! Component: 200  -  total flux cleaned = 0.12911 Jy
! Total flux subtracted in 200 components = 0.12911 Jy
! Clean residual min=-0.041200 max=0.033286 Jy/beam
! Clean residual mean=-0.000109 rms=0.010995 Jy/beam
! Combined flux in latest and established models = 0.910565 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174918 Jy
! Component: 100  -  total flux cleaned = 0.0323513 Jy
! Component: 150  -  total flux cleaned = 0.0450305 Jy
! Component: 200  -  total flux cleaned = 0.0565684 Jy
! Total flux subtracted in 200 components = 0.0565684 Jy
! Clean residual min=-0.037736 max=0.031297 Jy/beam
! Clean residual mean=-0.000083 rms=0.010180 Jy/beam
! Combined flux in latest and established models = 0.967133 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 92 components and 0.967133 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.349 mas, bmaj=5.437 mas, bpa=24.7 degrees
! Estimated noise=0.204018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00414611 Jy
! Component: 100  -  total flux cleaned = 0.0129245 Jy
! Component: 150  -  total flux cleaned = 0.0221922 Jy
! Component: 200  -  total flux cleaned = 0.0293987 Jy
! Total flux subtracted in 200 components = 0.0293987 Jy
! Clean residual min=-0.030211 max=0.026662 Jy/beam
! Clean residual mean=-0.000044 rms=0.008257 Jy/beam
! Combined flux in latest and established models = 0.996532 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 106 components and 0.996532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.474587Jy  sigma=48.667985
! Fit after  self-cal, rms=0.475740Jy  sigma=48.646048
wmodel /d2/scr/pima/bp177e_uvs/J1927+6117_C_map.mod
! Writing 106 model components to file: /d2/scr/pima/bp177e_uvs/J1927+6117_C_map.mod
wobs /d2/scr/pima/bp177e_uvs/J1927+6117_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177e_uvs/J1927+6117_C_uvs.fits
wwins /d2/scr/pima/bp177e_uvs/J1927+6117_C_map.win
! wwins: Wrote 3 windows to /d2/scr/pima/bp177e_uvs/J1927+6117_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0134217 Jy
! Component: 100  -  total flux cleaned = -0.0236769 Jy
! Component: 150  -  total flux cleaned = -0.0303112 Jy
! Component: 200  -  total flux cleaned = -0.03554 Jy
! Component: 250  -  total flux cleaned = -0.0396444 Jy
! Component: 300  -  total flux cleaned = -0.0428262 Jy
! Component: 350  -  total flux cleaned = -0.0455192 Jy
! Component: 400  -  total flux cleaned = -0.0469201 Jy
! Component: 450  -  total flux cleaned = -0.0479817 Jy
! Component: 500  -  total flux cleaned = -0.0484847 Jy
! Component: 550  -  total flux cleaned = -0.0489589 Jy
! Component: 600  -  total flux cleaned = -0.0487375 Jy
! Component: 650  -  total flux cleaned = -0.0476469 Jy
! Component: 700  -  total flux cleaned = -0.0472283 Jy
! Component: 750  -  total flux cleaned = -0.0466242 Jy
! Component: 800  -  total flux cleaned = -0.0460414 Jy
! Component: 850  -  total flux cleaned = -0.0452877 Jy
! Component: 900  -  total flux cleaned = -0.0443634 Jy
! Component: 950  -  total flux cleaned = -0.0431074 Jy
! Component: 1000  -  total flux cleaned = -0.0418882 Jy
! Component: 1050  -  total flux cleaned = -0.04087 Jy
! Component: 1100  -  total flux cleaned = -0.0407017 Jy
! Component: 1150  -  total flux cleaned = -0.0405389 Jy
! Component: 1200  -  total flux cleaned = -0.0402221 Jy
! Component: 1250  -  total flux cleaned = -0.0402197 Jy
! Component: 1300  -  total flux cleaned = -0.0393097 Jy
! Component: 1350  -  total flux cleaned = -0.0388626 Jy
! Component: 1400  -  total flux cleaned = -0.0384244 Jy
! Component: 1450  -  total flux cleaned = -0.0381387 Jy
! Component: 1500  -  total flux cleaned = -0.0378536 Jy
! Component: 1550  -  total flux cleaned = -0.0372975 Jy
! Component: 1600  -  total flux cleaned = -0.0368879 Jy
! Component: 1650  -  total flux cleaned = -0.0368884 Jy
! Component: 1700  -  total flux cleaned = -0.03662 Jy
! Component: 1750  -  total flux cleaned = -0.0363568 Jy
! Component: 1800  -  total flux cleaned = -0.0360982 Jy
! Component: 1850  -  total flux cleaned = -0.0359694 Jy
! Component: 1900  -  total flux cleaned = -0.0354577 Jy
! Component: 1950  -  total flux cleaned = -0.0353336 Jy
! Component: 2000  -  total flux cleaned = -0.0352081 Jy
! Component: 2050  -  total flux cleaned = -0.0345902 Jy
! Component: 2100  -  total flux cleaned = -0.034347 Jy
! Component: 2150  -  total flux cleaned = -0.0341038 Jy
! Component: 2200  -  total flux cleaned = -0.0336253 Jy
! Component: 2250  -  total flux cleaned = -0.0333897 Jy
! Component: 2300  -  total flux cleaned = -0.0331543 Jy
! Component: 2350  -  total flux cleaned = -0.032805 Jy
! Component: 2400  -  total flux cleaned = -0.032574 Jy
! Component: 2450  -  total flux cleaned = -0.0321162 Jy
! Component: 2500  -  total flux cleaned = -0.0320026 Jy
! Component: 2550  -  total flux cleaned = -0.031777 Jy
! Component: 2600  -  total flux cleaned = -0.031332 Jy
! Component: 2650  -  total flux cleaned = -0.0313322 Jy
! Component: 2700  -  total flux cleaned = -0.0312226 Jy
! Component: 2750  -  total flux cleaned = -0.0310043 Jy
! Component: 2800  -  total flux cleaned = -0.0307875 Jy
! Component: 2850  -  total flux cleaned = -0.0305719 Jy
! Component: 2900  -  total flux cleaned = -0.0301463 Jy
! Component: 2950  -  total flux cleaned = -0.0300405 Jy
! Component: 3000  -  total flux cleaned = -0.0296203 Jy
! Component: 3050  -  total flux cleaned = -0.0293075 Jy
! Component: 3100  -  total flux cleaned = -0.0287897 Jy
! Component: 3150  -  total flux cleaned = -0.028482 Jy
! Component: 3200  -  total flux cleaned = -0.0285841 Jy
! Component: 3250  -  total flux cleaned = -0.0279745 Jy
! Component: 3300  -  total flux cleaned = -0.0275706 Jy
! Component: 3350  -  total flux cleaned = -0.02737 Jy
! Component: 3400  -  total flux cleaned = -0.0268712 Jy
! Component: 3450  -  total flux cleaned = -0.026574 Jy
! Component: 3500  -  total flux cleaned = -0.0260798 Jy
! Component: 3550  -  total flux cleaned = -0.0256859 Jy
! Component: 3600  -  total flux cleaned = -0.025196 Jy
! Component: 3650  -  total flux cleaned = -0.0247089 Jy
! Component: 3700  -  total flux cleaned = -0.0244179 Jy
! Component: 3750  -  total flux cleaned = -0.023645 Jy
! Component: 3800  -  total flux cleaned = -0.023453 Jy
! Component: 3850  -  total flux cleaned = -0.0228775 Jy
! Component: 3900  -  total flux cleaned = -0.0223997 Jy
! Component: 3950  -  total flux cleaned = -0.0217325 Jy
! Component: 4000  -  total flux cleaned = -0.0211627 Jy
! Component: 4050  -  total flux cleaned = -0.020594 Jy
! Total flux subtracted in 4096 components = -0.0199321 Jy
! Clean residual min=-0.005520 max=0.005148 Jy/beam
! Clean residual mean=0.000008 rms=0.001722 Jy/beam
! Combined flux in latest and established models = 0.9766 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 398 components and 0.9766 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177e_uvs/J1927+6117_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.349 x 5.437 at 24.7 degrees (North through East)
! Clean map  min=-0.06224  max=0.48098 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177e_uvs/J1927+6117_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.480983 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00174552 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.08872 1.08872 2.17745 4.35489 8.70978 17.4196 34.8391 69.6783
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0052 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.48 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  275.552 
quit
! Quitting program
! Log file /d2/scr/pima/bp177e_uvs/J1927+6117_C_uvs.log closed on Sat Mar 22 18:59:44 2014