! Started logfile: /d2/scr/pima/bp177e_uvs/J1737+0236_C_uvs.log on Sat Mar 22 18:54:22 2014
obs /d2/scr/pima/bp177e_uvs/J1737+0236_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177e_uvs/J1737+0236_C_uva.fits
! AN table 1: 4 integrations on 15 of 15 possible baselines.
! AN table 2: 4 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.5 visibilities/baseline/integration-bin.
! Found source: J1737+0236
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 256 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177e_uvs/J1737+0236_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.999287Jy  sigma=46.713958
! Fit after  self-cal, rms=0.990073Jy  sigma=48.166143
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.381 mas, bmaj=17.35 mas, bpa=-30.82 degrees
! Estimated noise=1.37367 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00443921 Jy
! Component: 100  -  total flux cleaned = 0.00397468 Jy
! Total flux subtracted in 100 components = 0.00397468 Jy
! Clean residual min=-0.001201 max=0.001198 Jy/beam
! Clean residual mean=0.000001 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.00397468 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.00397468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011881Jy  sigma=0.534019
! Fit after  self-cal, rms=0.010210Jy  sigma=0.443963
! Inverting map 
! Added new window around map position (0.3, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112183 Jy
! Component: 100  -  total flux cleaned = 0.000935711 Jy
! Total flux subtracted in 100 components = 0.000935711 Jy
! Clean residual min=-0.001289 max=0.001340 Jy/beam
! Clean residual mean=0.000001 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.00491039 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 48 components and 0.00491039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009503Jy  sigma=0.423938
! Fit after  self-cal, rms=0.009476Jy  sigma=0.422999
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.725 mas, bmaj=17.69 mas, bpa=-29.17 degrees
! Estimated noise=1.17388 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.38998e-05 Jy
! Component: 100  -  total flux cleaned = -3.41947e-05 Jy
! Component: 150  -  total flux cleaned = 6.58792e-06 Jy
! Component: 200  -  total flux cleaned = 1.50649e-05 Jy
! Total flux subtracted in 200 components = 1.50649e-05 Jy
! Clean residual min=-0.001030 max=0.001164 Jy/beam
! Clean residual mean=0.000001 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.00492546 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 87 components and 0.00492545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009393Jy  sigma=0.422030
! Fit after  self-cal, rms=0.009384Jy  sigma=0.421586
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.725 x 17.69 at -29.17 degrees (North through East)
! Clean map  min=-0.0016435  max=0.0093191 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    PT        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    PT        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    PT        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    PT        0.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    PT        0.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    PT        0.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    PT        0.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.85     HN        1.00*    KP        1.09     
!   LA        1.15     NL        1.10     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    PT        0.00*    
! 
! 
! Fit before self-cal, rms=0.009384Jy  sigma=0.421586
! Fit after  self-cal, rms=0.009564Jy  sigma=0.420522
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.732 mas, bmaj=17.57 mas, bpa=-29.31 degrees
! Estimated noise=1.18943 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131388 Jy
! Component: 100  -  total flux cleaned = 0.000161878 Jy
! Component: 150  -  total flux cleaned = 0.000141098 Jy
! Component: 200  -  total flux cleaned = 0.000116258 Jy
! Total flux subtracted in 200 components = 0.000116258 Jy
! Clean residual min=-0.000931 max=0.001099 Jy/beam
! Clean residual mean=0.000001 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.00504171 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 118 components and 0.00504171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009520Jy  sigma=0.420105
! Fit after  self-cal, rms=0.009520Jy  sigma=0.419782
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009520Jy  sigma=0.419782
! Fit after  self-cal, rms=0.009746Jy  sigma=0.419613
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.737 mas, bmaj=17.54 mas, bpa=-29.37 degrees
! Estimated noise=1.19501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000119807 Jy
! Component: 100  -  total flux cleaned = -0.000238346 Jy
! Component: 150  -  total flux cleaned = -0.000278312 Jy
! Component: 200  -  total flux cleaned = -0.000320256 Jy
! Total flux subtracted in 200 components = -0.000320256 Jy
! Clean residual min=-0.000874 max=0.001035 Jy/beam
! Clean residual mean=0.000000 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.00472146 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 135 components and 0.00472146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009730Jy  sigma=0.419212
! Fit after  self-cal, rms=0.009744Jy  sigma=0.418856
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.38748e-05 Jy
! Component: 100  -  total flux cleaned = -0.000135503 Jy
! Component: 150  -  total flux cleaned = -0.000200626 Jy
! Component: 200  -  total flux cleaned = -0.000229482 Jy
! Total flux subtracted in 200 components = -0.000229482 Jy
! Clean residual min=-0.000845 max=0.000932 Jy/beam
! Clean residual mean=0.000000 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.00449198 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 144 components and 0.00449198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009731Jy  sigma=0.418394
! Fit after  self-cal, rms=0.009737Jy  sigma=0.417569
! Inverting map 
! Added new window around map position (28.8, 42).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000305395 Jy
! Component: 100  -  total flux cleaned = 0.000746368 Jy
! Component: 150  -  total flux cleaned = 0.000943112 Jy
! Component: 200  -  total flux cleaned = 0.000993012 Jy
! Total flux subtracted in 200 components = 0.000993012 Jy
! Clean residual min=-0.000601 max=0.000703 Jy/beam
! Clean residual mean=0.000000 rms=0.000160 Jy/beam
! Combined flux in latest and established models = 0.00548499 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 196 components and 0.00548499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009566Jy  sigma=0.411516
! Fit after  self-cal, rms=0.009571Jy  sigma=0.409148
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009571Jy  sigma=0.409148
! Fit after  self-cal, rms=0.009452Jy  sigma=0.407792
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.744 mas, bmaj=17.49 mas, bpa=-29.41 degrees
! Estimated noise=1.17774 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000464453 Jy
! Component: 100  -  total flux cleaned = 0.000673893 Jy
! Component: 150  -  total flux cleaned = 0.00076215 Jy
! Component: 200  -  total flux cleaned = 0.000725112 Jy
! Total flux subtracted in 200 components = 0.000725112 Jy
! Clean residual min=-0.000442 max=0.000528 Jy/beam
! Clean residual mean=0.000000 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.0062101 Jy
selfcal
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 244 components and 0.0062101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009381Jy  sigma=0.405133
! Fit after  self-cal, rms=0.009386Jy  sigma=0.404284
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168337 Jy
! Component: 100  -  total flux cleaned = 0.000251581 Jy
! Component: 150  -  total flux cleaned = 0.000287459 Jy
! Component: 200  -  total flux cleaned = 0.000324841 Jy
! Total flux subtracted in 200 components = 0.000324841 Jy
! Clean residual min=-0.000479 max=0.000563 Jy/beam
! Clean residual mean=0.000000 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.00653494 Jy
! Performing phase self-cal
! Adding 95 model components to the UV plane model.
! The established model now contains 326 components and 0.00653494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009354Jy  sigma=0.403093
! Fit after  self-cal, rms=0.009355Jy  sigma=0.402730
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009355Jy  sigma=0.402730
! Fit after  self-cal, rms=0.009563Jy  sigma=0.401763
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.126 mas, bmaj=16.67 mas, bpa=-30.15 degrees
! Estimated noise=1.20811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000299078 Jy
! Component: 100  -  total flux cleaned = 0.000291774 Jy
! Component: 150  -  total flux cleaned = 0.000262308 Jy
! Component: 200  -  total flux cleaned = 0.000231491 Jy
! Total flux subtracted in 200 components = 0.000231491 Jy
! Clean residual min=-0.000427 max=0.000520 Jy/beam
! Clean residual mean=0.000000 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.00676643 Jy
selfcal
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 374 components and 0.00676643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009533Jy  sigma=0.400817
! Fit after  self-cal, rms=0.009535Jy  sigma=0.400128
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000261112 Jy
! Component: 100  -  total flux cleaned = 0.000250327 Jy
! Component: 150  -  total flux cleaned = 0.000223303 Jy
! Component: 200  -  total flux cleaned = 0.000223406 Jy
! Total flux subtracted in 200 components = 0.000223406 Jy
! Clean residual min=-0.000480 max=0.000507 Jy/beam
! Clean residual mean=0.000000 rms=0.000133 Jy/beam
! Combined flux in latest and established models = 0.00698984 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 413 components and 0.00698984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009499Jy  sigma=0.399040
! Fit after  self-cal, rms=0.009487Jy  sigma=0.398428
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.716 mas, bmaj=17.55 mas, bpa=-29.43 degrees
! Estimated noise=1.18509 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.716 x 17.55 at -29.43 degrees (North through East)
! Clean map  min=-0.001528  max=0.0088557 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.375 mas, bmaj=17.37 mas, bpa=-31.15 degrees
! Estimated noise=1.36308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00604473 Jy
! Component: 100  -  total flux cleaned = 0.00527081 Jy
! Component: 150  -  total flux cleaned = 0.00507334 Jy
! Component: 200  -  total flux cleaned = 0.00500788 Jy
! Total flux subtracted in 200 components = 0.00500788 Jy
! Clean residual min=-0.001327 max=0.001084 Jy/beam
! Clean residual mean=0.000001 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.00500788 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.00500788 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.716 mas, bmaj=17.55 mas, bpa=-29.43 degrees
! Estimated noise=1.18509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000405033 Jy
! Component: 100  -  total flux cleaned = -0.000281957 Jy
! Component: 150  -  total flux cleaned = -0.000152148 Jy
! Component: 200  -  total flux cleaned = -8.99486e-05 Jy
! Total flux subtracted in 200 components = -8.99486e-05 Jy
! Clean residual min=-0.001037 max=0.000776 Jy/beam
! Clean residual mean=0.000001 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.00491793 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 64 components and 0.00491793 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.126 mas, bmaj=16.67 mas, bpa=-30.15 degrees
! Estimated noise=1.20811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.01633e-05 Jy
! Component: 100  -  total flux cleaned = 2.16541e-05 Jy
! Component: 150  -  total flux cleaned = -7.66301e-05 Jy
! Component: 200  -  total flux cleaned = -0.000142399 Jy
! Total flux subtracted in 200 components = -0.000142399 Jy
! Clean residual min=-0.000874 max=0.000689 Jy/beam
! Clean residual mean=0.000001 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.00477553 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.00364e-05 Jy
! Component: 100  -  total flux cleaned = -4.70859e-05 Jy
! Component: 150  -  total flux cleaned = -6.38269e-05 Jy
! Component: 200  -  total flux cleaned = -7.96422e-05 Jy
! Total flux subtracted in 200 components = -7.96422e-05 Jy
! Clean residual min=-0.000799 max=0.000665 Jy/beam
! Clean residual mean=0.000001 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.00469589 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 121 components and 0.00469589 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.716 mas, bmaj=17.55 mas, bpa=-29.43 degrees
! Estimated noise=1.18509 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.83709e-05 Jy
! Component: 100  -  total flux cleaned = -9.096e-05 Jy
! Component: 150  -  total flux cleaned = -0.000114707 Jy
! Component: 200  -  total flux cleaned = -0.000142465 Jy
! Total flux subtracted in 200 components = -0.000142465 Jy
! Clean residual min=-0.000781 max=0.000686 Jy/beam
! Clean residual mean=0.000001 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.00455343 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 152 components and 0.00455342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009494Jy  sigma=0.399068
! Fit after  self-cal, rms=0.009484Jy  sigma=0.397506
wmodel /d2/scr/pima/bp177e_uvs/J1737+0236_C_map.mod
! Writing 152 model components to file: /d2/scr/pima/bp177e_uvs/J1737+0236_C_map.mod
wobs /d2/scr/pima/bp177e_uvs/J1737+0236_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177e_uvs/J1737+0236_C_uvs.fits
wwins /d2/scr/pima/bp177e_uvs/J1737+0236_C_map.win
! wwins: Wrote 2 windows to /d2/scr/pima/bp177e_uvs/J1737+0236_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -2.18437e-05 Jy
! Component: 100  -  total flux cleaned = 2.5325e-05 Jy
! Component: 150  -  total flux cleaned = 4.14349e-05 Jy
! Component: 200  -  total flux cleaned = 7.80951e-05 Jy
! Component: 250  -  total flux cleaned = 0.000112487 Jy
! Component: 300  -  total flux cleaned = 0.000138609 Jy
! Component: 350  -  total flux cleaned = 0.000144821 Jy
! Component: 400  -  total flux cleaned = 0.000144767 Jy
! Component: 450  -  total flux cleaned = 0.000169413 Jy
! Component: 500  -  total flux cleaned = 0.000181724 Jy
! Component: 550  -  total flux cleaned = 0.000200155 Jy
! Component: 600  -  total flux cleaned = 0.000206278 Jy
! Component: 650  -  total flux cleaned = 0.000218774 Jy
! Component: 700  -  total flux cleaned = 0.000231381 Jy
! Component: 750  -  total flux cleaned = 0.000244112 Jy
! Component: 800  -  total flux cleaned = 0.000263226 Jy
! Component: 850  -  total flux cleaned = 0.000289007 Jy
! Component: 900  -  total flux cleaned = 0.000302018 Jy
! Component: 950  -  total flux cleaned = 0.000341556 Jy
! Component: 1000  -  total flux cleaned = 0.000368314 Jy
! Component: 1050  -  total flux cleaned = 0.000388668 Jy
! Component: 1100  -  total flux cleaned = 0.000416272 Jy
! Component: 1150  -  total flux cleaned = 0.000451274 Jy
! Component: 1200  -  total flux cleaned = 0.000472728 Jy
! Component: 1250  -  total flux cleaned = 0.000509199 Jy
! Component: 1300  -  total flux cleaned = 0.000553756 Jy
! Component: 1350  -  total flux cleaned = 0.000576653 Jy
! Component: 1400  -  total flux cleaned = 0.000607618 Jy
! Component: 1450  -  total flux cleaned = 0.000631405 Jy
! Component: 1500  -  total flux cleaned = 0.000671955 Jy
! Component: 1550  -  total flux cleaned = 0.000696894 Jy
! Component: 1600  -  total flux cleaned = 0.000739069 Jy
! Component: 1650  -  total flux cleaned = 0.000765018 Jy
! Component: 1700  -  total flux cleaned = 0.000782744 Jy
! Component: 1750  -  total flux cleaned = 0.000837167 Jy
! Component: 1800  -  total flux cleaned = 0.00087455 Jy
! Component: 1850  -  total flux cleaned = 0.000931703 Jy
! Component: 1900  -  total flux cleaned = 0.000980883 Jy
! Component: 1950  -  total flux cleaned = 0.00104198 Jy
! Component: 2000  -  total flux cleaned = 0.00108364 Jy
! Component: 2050  -  total flux cleaned = 0.00115904 Jy
! Component: 2100  -  total flux cleaned = 0.00120343 Jy
! Component: 2150  -  total flux cleaned = 0.00127203 Jy
! Component: 2200  -  total flux cleaned = 0.00134287 Jy
! Component: 2250  -  total flux cleaned = 0.00142853 Jy
! Component: 2300  -  total flux cleaned = 0.0014913 Jy
! Component: 2350  -  total flux cleaned = 0.00156917 Jy
! Component: 2400  -  total flux cleaned = 0.00164975 Jy
! Component: 2450  -  total flux cleaned = 0.00174651 Jy
! Component: 2500  -  total flux cleaned = 0.00186077 Jy
! Component: 2550  -  total flux cleaned = 0.00196444 Jy
! Component: 2600  -  total flux cleaned = 0.00207158 Jy
! Component: 2650  -  total flux cleaned = 0.0021509 Jy
! Component: 2700  -  total flux cleaned = 0.00226461 Jy
! Component: 2750  -  total flux cleaned = 0.00241594 Jy
! Component: 2800  -  total flux cleaned = 0.00252046 Jy
! Component: 2850  -  total flux cleaned = 0.00266405 Jy
! Component: 2900  -  total flux cleaned = 0.00281261 Jy
! Component: 2950  -  total flux cleaned = 0.00292785 Jy
! Component: 3000  -  total flux cleaned = 0.00306681 Jy
! Component: 3050  -  total flux cleaned = 0.00323147 Jy
! Component: 3100  -  total flux cleaned = 0.00335906 Jy
! Component: 3150  -  total flux cleaned = 0.00351251 Jy
! Component: 3200  -  total flux cleaned = 0.00367184 Jy
! Component: 3250  -  total flux cleaned = 0.00383659 Jy
! Component: 3300  -  total flux cleaned = 0.00400676 Jy
! Component: 3350  -  total flux cleaned = 0.00418259 Jy
! Component: 3400  -  total flux cleaned = 0.00436427 Jy
! Component: 3450  -  total flux cleaned = 0.00455303 Jy
! Component: 3500  -  total flux cleaned = 0.00466368 Jy
! Component: 3550  -  total flux cleaned = 0.0048075 Jy
! Component: 3600  -  total flux cleaned = 0.00495711 Jy
! Component: 3650  -  total flux cleaned = 0.00504998 Jy
! Component: 3700  -  total flux cleaned = 0.00511435 Jy
! Component: 3750  -  total flux cleaned = 0.00517994 Jy
! Component: 3800  -  total flux cleaned = 0.00528262 Jy
! Component: 3850  -  total flux cleaned = 0.00528298 Jy
! Component: 3900  -  total flux cleaned = 0.00535692 Jy
! Component: 3950  -  total flux cleaned = 0.00539554 Jy
! Component: 4000  -  total flux cleaned = 0.00543497 Jy
! Component: 4050  -  total flux cleaned = 0.0054764 Jy
! Total flux subtracted in 4096 components = 0.005562 Jy
! Clean residual min=-0.002283 max=0.002275 Jy/beam
! Clean residual mean=-0.000002 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.0101154 Jy
keep
! Adding 128 model components to the UV plane model.
! The established model now contains 280 components and 0.0101154 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177e_uvs/J1737+0236_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.716 x 17.55 at -29.43 degrees (North through East)
! Clean map  min=-0.0038592  max=0.007719 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177e_uvs/J1737+0236_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.00771898 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000852747 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -33.1422 33.1422 66.2844
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0025 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.007 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  9.051 
quit
! Quitting program
! Log file /d2/scr/pima/bp177e_uvs/J1737+0236_C_uvs.log closed on Sat Mar 22 18:54:28 2014