! Started logfile: /d2/scr/pima/bp177e_uvs/J1545+0149_C_uvs.log on Sat Mar 22 18:48:04 2014
obs /d2/scr/pima/bp177e_uvs/J1545+0149_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177e_uvs/J1545+0149_C_uva.fits
! AN table 1: 3 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.7 visibilities/baseline/integration-bin.
! Found source: J1545+0149
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 168 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177e_uvs/J1545+0149_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.995442Jy  sigma=49.147997
! Fit after  self-cal, rms=0.982774Jy  sigma=48.621965
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.97 mas, bmaj=20.93 mas, bpa=16.81 degrees
! Estimated noise=1.28231 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00917918 Jy
! Component: 100  -  total flux cleaned = 0.00559292 Jy
! Total flux subtracted in 100 components = 0.00559292 Jy
! Clean residual min=-0.002953 max=0.002984 Jy/beam
! Clean residual mean=-0.000021 rms=0.001370 Jy/beam
! Combined flux in latest and established models = 0.00559292 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.00559292 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014139Jy  sigma=0.620319
! Fit after  self-cal, rms=0.013379Jy  sigma=0.578361
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.526 mas, bmaj=19.74 mas, bpa=17.75 degrees
! Estimated noise=1.12156 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00131218 Jy
! Component: 100  -  total flux cleaned = -0.0033122 Jy
! Component: 150  -  total flux cleaned = -0.00470427 Jy
! Component: 200  -  total flux cleaned = -0.00593025 Jy
! Total flux subtracted in 200 components = -0.00593025 Jy
! Clean residual min=-0.001195 max=0.001166 Jy/beam
! Clean residual mean=-0.000011 rms=0.000529 Jy/beam
! Combined flux in latest and established models = -0.000337326 Jy
! Performing phase self-cal
! Adding 119 model components to the UV plane model.
! The established model now contains 151 components and -0.000337327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010738Jy  sigma=0.473591
! Fit after  self-cal, rms=0.010660Jy  sigma=0.469098
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.526 x 19.74 at 17.75 degrees (North through East)
! Clean map  min=-0.0057221  max=0.012944 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.19     KP        0.85     LA        0.84     OV        0.94     
!   PT        1.05     
! 
! 
! Fit before self-cal, rms=0.010660Jy  sigma=0.469098
! Fit after  self-cal, rms=0.010586Jy  sigma=0.465831
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.486 mas, bmaj=19.78 mas, bpa=17.41 degrees
! Estimated noise=1.11497 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000513163 Jy
! Component: 100  -  total flux cleaned = 0.000418073 Jy
! Component: 150  -  total flux cleaned = 0.000771623 Jy
! Component: 200  -  total flux cleaned = 0.00143761 Jy
! Total flux subtracted in 200 components = 0.00143761 Jy
! Clean residual min=-0.000609 max=0.000613 Jy/beam
! Clean residual mean=0.000002 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.00110028 Jy
! Performing phase self-cal
! Adding 106 model components to the UV plane model.
! The established model now contains 257 components and 0.00110028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010142Jy  sigma=0.454785
! Fit after  self-cal, rms=0.010135Jy  sigma=0.454298
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010135Jy  sigma=0.454298
! Fit after  self-cal, rms=0.010119Jy  sigma=0.454071
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.461 mas, bmaj=19.8 mas, bpa=17.37 degrees
! Estimated noise=1.11366 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.88058e-05 Jy
! Component: 100  -  total flux cleaned = 0.000476339 Jy
! Component: 150  -  total flux cleaned = 0.000865203 Jy
! Component: 200  -  total flux cleaned = 0.00133948 Jy
! Total flux subtracted in 200 components = 0.00133948 Jy
! Clean residual min=-0.000395 max=0.000394 Jy/beam
! Clean residual mean=0.000003 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.00243976 Jy
selfcal
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 341 components and 0.00243976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009953Jy  sigma=0.450200
! Fit after  self-cal, rms=0.009949Jy  sigma=0.450016
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000182924 Jy
! Component: 100  -  total flux cleaned = 0.000148127 Jy
! Component: 150  -  total flux cleaned = 0.000300278 Jy
! Component: 200  -  total flux cleaned = 0.00041424 Jy
! Total flux subtracted in 200 components = 0.00041424 Jy
! Clean residual min=-0.000315 max=0.000316 Jy/beam
! Clean residual mean=0.000003 rms=0.000119 Jy/beam
! Combined flux in latest and established models = 0.002854 Jy
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 409 components and 0.002854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009853Jy  sigma=0.447941
! Fit after  self-cal, rms=0.009849Jy  sigma=0.447806
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009849Jy  sigma=0.447806
! Fit after  self-cal, rms=0.009822Jy  sigma=0.447706
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.459 mas, bmaj=19.81 mas, bpa=17.35 degrees
! Estimated noise=1.11049 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.97185e-05 Jy
! Component: 100  -  total flux cleaned = 0.000160501 Jy
! Component: 150  -  total flux cleaned = 0.000302608 Jy
! Component: 200  -  total flux cleaned = 0.000460202 Jy
! Total flux subtracted in 200 components = 0.000460202 Jy
! Clean residual min=-0.000262 max=0.000269 Jy/beam
! Clean residual mean=0.000004 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.0033142 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 464 components and 0.0033142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009759Jy  sigma=0.446111
! Fit after  self-cal, rms=0.009755Jy  sigma=0.445991
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.8557e-05 Jy
! Component: 100  -  total flux cleaned = -0.000232555 Jy
! Component: 150  -  total flux cleaned = -0.000407585 Jy
! Component: 200  -  total flux cleaned = -0.00058626 Jy
! Total flux subtracted in 200 components = -0.00058626 Jy
! Clean residual min=-0.000233 max=0.000232 Jy/beam
! Clean residual mean=0.000003 rms=0.000090 Jy/beam
! Combined flux in latest and established models = 0.00272794 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 513 components and 0.00272794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009715Jy  sigma=0.444675
! Fit after  self-cal, rms=0.009711Jy  sigma=0.444544
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009711Jy  sigma=0.444544
! Fit after  self-cal, rms=0.009699Jy  sigma=0.444473
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.635 mas, bmaj=19.66 mas, bpa=17.57 degrees
! Estimated noise=1.10873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173483 Jy
! Component: 100  -  total flux cleaned = 0.000299662 Jy
! Component: 150  -  total flux cleaned = 0.000436405 Jy
! Component: 200  -  total flux cleaned = 0.000549637 Jy
! Total flux subtracted in 200 components = 0.000549637 Jy
! Clean residual min=-0.000210 max=0.000213 Jy/beam
! Clean residual mean=0.000004 rms=0.000081 Jy/beam
! Combined flux in latest and established models = 0.00327757 Jy
selfcal
! Performing phase self-cal
! Adding 89 model components to the UV plane model.
! The established model now contains 563 components and 0.00327757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009657Jy  sigma=0.443504
! Fit after  self-cal, rms=0.009655Jy  sigma=0.443414
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0001163 Jy
! Component: 100  -  total flux cleaned = -0.000339862 Jy
! Component: 150  -  total flux cleaned = -0.000525226 Jy
! Component: 200  -  total flux cleaned = -0.0007969 Jy
! Total flux subtracted in 200 components = -0.0007969 Jy
! Clean residual min=-0.000202 max=0.000196 Jy/beam
! Clean residual mean=0.000003 rms=0.000078 Jy/beam
! Combined flux in latest and established models = 0.00248067 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 619 components and 0.00248067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009629Jy  sigma=0.442322
! Fit after  self-cal, rms=0.009625Jy  sigma=0.442213
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.46 mas, bmaj=19.82 mas, bpa=17.31 degrees
! Estimated noise=1.109 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.46 x 19.82 at 17.31 degrees (North through East)
! Clean map  min=-0.0052876  max=0.012092 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.916 mas, bmaj=21.06 mas, bpa=16.52 degrees
! Estimated noise=1.26642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00712738 Jy
! Component: 100  -  total flux cleaned = 0.00459543 Jy
! Component: 150  -  total flux cleaned = 0.00249129 Jy
! Component: 200  -  total flux cleaned = 0.000199943 Jy
! Total flux subtracted in 200 components = 0.000199943 Jy
! Clean residual min=-0.001873 max=0.001820 Jy/beam
! Clean residual mean=-0.000013 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.000199943 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 75 model components to the UV plane model.
! The established model now contains 75 components and 0.000199943 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.46 mas, bmaj=19.82 mas, bpa=17.31 degrees
! Estimated noise=1.109 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00077694 Jy
! Component: 100  -  total flux cleaned = -0.00143044 Jy
! Component: 150  -  total flux cleaned = -0.00114819 Jy
! Component: 200  -  total flux cleaned = -0.000524455 Jy
! Total flux subtracted in 200 components = -0.000524455 Jy
! Clean residual min=-0.000835 max=0.000839 Jy/beam
! Clean residual mean=-0.000003 rms=0.000346 Jy/beam
! Combined flux in latest and established models = -0.000324512 Jy
! Adding 114 model components to the UV plane model.
! The established model now contains 189 components and -0.000324512 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.635 mas, bmaj=19.66 mas, bpa=17.57 degrees
! Estimated noise=1.10873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000500182 Jy
! Component: 100  -  total flux cleaned = -0.00022321 Jy
! Component: 150  -  total flux cleaned = 0.00017235 Jy
! Component: 200  -  total flux cleaned = 0.000813932 Jy
! Total flux subtracted in 200 components = 0.000813932 Jy
! Clean residual min=-0.000523 max=0.000533 Jy/beam
! Clean residual mean=0.000002 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.00048942 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000733751 Jy
! Component: 100  -  total flux cleaned = 0.00146887 Jy
! Component: 150  -  total flux cleaned = 0.00215314 Jy
! Component: 200  -  total flux cleaned = 0.00293994 Jy
! Total flux subtracted in 200 components = 0.00293994 Jy
! Clean residual min=-0.000574 max=0.000591 Jy/beam
! Clean residual mean=0.000002 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.00342936 Jy
! Adding 133 model components to the UV plane model.
! The established model now contains 314 components and 0.00342937 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.46 mas, bmaj=19.82 mas, bpa=17.31 degrees
! Estimated noise=1.109 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000377376 Jy
! Component: 100  -  total flux cleaned = -0.000622438 Jy
! Component: 150  -  total flux cleaned = -0.000843457 Jy
! Component: 200  -  total flux cleaned = -0.00110916 Jy
! Total flux subtracted in 200 components = -0.00110916 Jy
! Clean residual min=-0.000294 max=0.000288 Jy/beam
! Clean residual mean=0.000003 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.0023202 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 379 components and 0.0023202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009715Jy  sigma=0.443605
! Fit after  self-cal, rms=0.009698Jy  sigma=0.443037
wmodel /d2/scr/pima/bp177e_uvs/J1545+0149_C_map.mod
! Writing 379 model components to file: /d2/scr/pima/bp177e_uvs/J1545+0149_C_map.mod
wobs /d2/scr/pima/bp177e_uvs/J1545+0149_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177e_uvs/J1545+0149_C_uvs.fits
wwins /d2/scr/pima/bp177e_uvs/J1545+0149_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177e_uvs/J1545+0149_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.46 x 19.82 at 17.31 degrees (North through East)
! Clean map  min=-0.0051796  max=0.0094221 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177e_uvs/J1545+0149_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.00942212 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000115905 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.69043 3.69043 7.38086 14.7617 29.5234 59.0468
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.009 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  81.291 
quit
! Quitting program
! Log file /d2/scr/pima/bp177e_uvs/J1545+0149_C_uvs.log closed on Sat Mar 22 18:48:08 2014