! Started logfile: /d2/scr/pima/bp177e_uvs/J1517-1639_C_uvs.log on Sat Mar 22 18:47:14 2014
obs /d2/scr/pima/bp177e_uvs/J1517-1639_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177e_uvs/J1517-1639_C_uva.fits
! AN table 1: 3 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.8 visibilities/baseline/integration-bin.
! Found source: J1517-1639
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 192 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177e_uvs/J1517-1639_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.998792Jy  sigma=46.546083
! Fit after  self-cal, rms=0.985202Jy  sigma=45.990239
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.822 mas, bmaj=21.9 mas, bpa=17.08 degrees
! Estimated noise=1.28331 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115795 Jy
! Component: 100  -  total flux cleaned = 0.0155775 Jy
! Total flux subtracted in 100 components = 0.0155775 Jy
! Clean residual min=-0.003064 max=0.003026 Jy/beam
! Clean residual mean=0.000003 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.0155775 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.0155775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015855Jy  sigma=0.617487
! Fit after  self-cal, rms=0.014479Jy  sigma=0.549537
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.672 mas, bmaj=22.23 mas, bpa=17.08 degrees
! Estimated noise=1.11857 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261389 Jy
! Component: 100  -  total flux cleaned = 0.00466284 Jy
! Component: 150  -  total flux cleaned = 0.00623216 Jy
! Component: 200  -  total flux cleaned = 0.00643852 Jy
! Total flux subtracted in 200 components = 0.00643852 Jy
! Clean residual min=-0.001089 max=0.001135 Jy/beam
! Clean residual mean=-0.000002 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.022016 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 109 components and 0.022016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012817Jy  sigma=0.493963
! Fit after  self-cal, rms=0.012689Jy  sigma=0.490210
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.672 x 22.23 at 17.08 degrees (North through East)
! Clean map  min=-0.0018805  max=0.0083395 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.012689Jy  sigma=0.490210
! Fit after  self-cal, rms=0.012689Jy  sigma=0.490210
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.672 mas, bmaj=22.23 mas, bpa=17.08 degrees
! Estimated noise=1.11857 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00061402 Jy
! Component: 100  -  total flux cleaned = -0.00086001 Jy
! Component: 150  -  total flux cleaned = -0.000472487 Jy
! Component: 200  -  total flux cleaned = -1.0915e-05 Jy
! Total flux subtracted in 200 components = -1.0915e-05 Jy
! Clean residual min=-0.000486 max=0.000488 Jy/beam
! Clean residual mean=0.000000 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.0220051 Jy
! Performing phase self-cal
! Adding 93 model components to the UV plane model.
! The established model now contains 200 components and 0.0220051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012301Jy  sigma=0.478943
! Fit after  self-cal, rms=0.012252Jy  sigma=0.477843
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012252Jy  sigma=0.477843
! Fit after  self-cal, rms=0.012326Jy  sigma=0.475299
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.689 mas, bmaj=22.24 mas, bpa=17.1 degrees
! Estimated noise=1.13349 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000166828 Jy
! Component: 100  -  total flux cleaned = -7.37085e-05 Jy
! Component: 150  -  total flux cleaned = -7.36008e-05 Jy
! Component: 200  -  total flux cleaned = -0.00010265 Jy
! Total flux subtracted in 200 components = -0.00010265 Jy
! Clean residual min=-0.000536 max=0.000518 Jy/beam
! Clean residual mean=-0.000001 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0219025 Jy
selfcal
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 254 components and 0.0219025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012158Jy  sigma=0.470851
! Fit after  self-cal, rms=0.012143Jy  sigma=0.470108
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000497653 Jy
! Component: 100  -  total flux cleaned = -0.000541867 Jy
! Component: 150  -  total flux cleaned = -0.000415017 Jy
! Component: 200  -  total flux cleaned = -0.000177373 Jy
! Total flux subtracted in 200 components = -0.000177373 Jy
! Clean residual min=-0.000251 max=0.000255 Jy/beam
! Clean residual mean=0.000000 rms=0.000108 Jy/beam
! Combined flux in latest and established models = 0.0217251 Jy
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 331 components and 0.0217251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012051Jy  sigma=0.467326
! Fit after  self-cal, rms=0.012040Jy  sigma=0.467055
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012040Jy  sigma=0.467055
! Fit after  self-cal, rms=0.011807Jy  sigma=0.463612
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.731 mas, bmaj=22.2 mas, bpa=17.05 degrees
! Estimated noise=1.13139 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000164637 Jy
! Component: 100  -  total flux cleaned = -8.00644e-05 Jy
! Component: 150  -  total flux cleaned = 0.000115169 Jy
! Component: 200  -  total flux cleaned = 0.000224578 Jy
! Total flux subtracted in 200 components = 0.000224578 Jy
! Clean residual min=-0.000197 max=0.000196 Jy/beam
! Clean residual mean=0.000001 rms=0.000081 Jy/beam
! Combined flux in latest and established models = 0.0219497 Jy
selfcal
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 399 components and 0.0219497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011753Jy  sigma=0.462443
! Fit after  self-cal, rms=0.011769Jy  sigma=0.462125
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000190152 Jy
! Component: 100  -  total flux cleaned = -0.000202888 Jy
! Component: 150  -  total flux cleaned = -0.000232881 Jy
! Component: 200  -  total flux cleaned = -0.000194225 Jy
! Total flux subtracted in 200 components = -0.000194225 Jy
! Clean residual min=-0.000158 max=0.000157 Jy/beam
! Clean residual mean=0.000001 rms=0.000065 Jy/beam
! Combined flux in latest and established models = 0.0217555 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 465 components and 0.0217555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011738Jy  sigma=0.461524
! Fit after  self-cal, rms=0.011735Jy  sigma=0.461418
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011735Jy  sigma=0.461418
! Fit after  self-cal, rms=0.011791Jy  sigma=0.461249
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.223 mas, bmaj=21.86 mas, bpa=16.74 degrees
! Estimated noise=1.13757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.51932e-05 Jy
! Component: 100  -  total flux cleaned = -0.000177267 Jy
! Component: 150  -  total flux cleaned = -0.000137537 Jy
! Component: 200  -  total flux cleaned = -7.39832e-05 Jy
! Total flux subtracted in 200 components = -7.39832e-05 Jy
! Clean residual min=-0.000148 max=0.000150 Jy/beam
! Clean residual mean=0.000001 rms=0.000064 Jy/beam
! Combined flux in latest and established models = 0.0216815 Jy
selfcal
! Performing phase self-cal
! Adding 87 model components to the UV plane model.
! The established model now contains 539 components and 0.0216815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011756Jy  sigma=0.460767
! Fit after  self-cal, rms=0.011756Jy  sigma=0.460695
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000172217 Jy
! Component: 100  -  total flux cleaned = -0.000243597 Jy
! Component: 150  -  total flux cleaned = -0.000316099 Jy
! Component: 200  -  total flux cleaned = -0.000346578 Jy
! Total flux subtracted in 200 components = -0.000346578 Jy
! Clean residual min=-0.000124 max=0.000124 Jy/beam
! Clean residual mean=0.000000 rms=0.000052 Jy/beam
! Combined flux in latest and established models = 0.0213349 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 591 components and 0.0213349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011735Jy  sigma=0.460360
! Fit after  self-cal, rms=0.011733Jy  sigma=0.460300
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.753 mas, bmaj=22.16 mas, bpa=17.03 degrees
! Estimated noise=1.13615 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.753 x 22.16 at 17.03 degrees (North through East)
! Clean map  min=-0.0015565  max=0.0084612 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.893 mas, bmaj=21.73 mas, bpa=17.07 degrees
! Estimated noise=1.31657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128644 Jy
! Component: 100  -  total flux cleaned = 0.0146153 Jy
! Component: 150  -  total flux cleaned = 0.0150143 Jy
! Component: 200  -  total flux cleaned = 0.0150172 Jy
! Total flux subtracted in 200 components = 0.0150172 Jy
! Clean residual min=-0.003693 max=0.003796 Jy/beam
! Clean residual mean=-0.000007 rms=0.001076 Jy/beam
! Combined flux in latest and established models = 0.0150172 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 50 model components to the UV plane model.
! The established model now contains 50 components and 0.0150172 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.753 mas, bmaj=22.16 mas, bpa=17.03 degrees
! Estimated noise=1.13615 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000371008 Jy
! Component: 100  -  total flux cleaned = 0.000213999 Jy
! Component: 150  -  total flux cleaned = 0.000882547 Jy
! Component: 200  -  total flux cleaned = 0.000745152 Jy
! Total flux subtracted in 200 components = 0.000745152 Jy
! Clean residual min=-0.001097 max=0.001141 Jy/beam
! Clean residual mean=0.000005 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.0157624 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 119 components and 0.0157624 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.223 mas, bmaj=21.86 mas, bpa=16.74 degrees
! Estimated noise=1.13757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.22616e-05 Jy
! Component: 100  -  total flux cleaned = 3.84641e-06 Jy
! Component: 150  -  total flux cleaned = -0.000106186 Jy
! Component: 200  -  total flux cleaned = -0.000271428 Jy
! Total flux subtracted in 200 components = -0.000271428 Jy
! Clean residual min=-0.000529 max=0.000536 Jy/beam
! Clean residual mean=0.000001 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0154909 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.30533e-07 Jy
! Component: 100  -  total flux cleaned = -3.97713e-05 Jy
! Component: 150  -  total flux cleaned = -8.09375e-05 Jy
! Component: 200  -  total flux cleaned = -7.88452e-05 Jy
! Total flux subtracted in 200 components = -7.88452e-05 Jy
! Clean residual min=-0.000765 max=0.000733 Jy/beam
! Clean residual mean=-0.000002 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.0154121 Jy
! Adding 91 model components to the UV plane model.
! The established model now contains 208 components and 0.0154121 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.753 mas, bmaj=22.16 mas, bpa=17.03 degrees
! Estimated noise=1.13615 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015008 Jy
! Component: 100  -  total flux cleaned = 0.000185447 Jy
! Component: 150  -  total flux cleaned = 0.000212164 Jy
! Component: 200  -  total flux cleaned = 0.00029836 Jy
! Total flux subtracted in 200 components = 0.00029836 Jy
! Clean residual min=-0.000340 max=0.000339 Jy/beam
! Clean residual mean=0.000001 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.0157104 Jy
selfcal
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 273 components and 0.0157104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011820Jy  sigma=0.462687
! Fit after  self-cal, rms=0.011814Jy  sigma=0.461758
wmodel /d2/scr/pima/bp177e_uvs/J1517-1639_C_map.mod
! Writing 273 model components to file: /d2/scr/pima/bp177e_uvs/J1517-1639_C_map.mod
wobs /d2/scr/pima/bp177e_uvs/J1517-1639_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177e_uvs/J1517-1639_C_uvs.fits
wwins /d2/scr/pima/bp177e_uvs/J1517-1639_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177e_uvs/J1517-1639_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.753 x 22.16 at 17.03 degrees (North through East)
! Clean map  min=-0.0024136  max=0.010972 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177e_uvs/J1517-1639_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0109717 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000113683 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.10844 3.10844 6.21689 12.4338 24.8675 49.7351 99.4702
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.01 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  96.511 
quit
! Quitting program
! Log file /d2/scr/pima/bp177e_uvs/J1517-1639_C_uvs.log closed on Sat Mar 22 18:47:18 2014