! Started logfile: /d2/scr/pima/bp177c_uvs/J1504-0249_X_uvs.log on Sat Mar 22 21:17:32 2014
obs /d2/scr/pima/bp177c_uvs/J1504-0249_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177c_uvs/J1504-0249_X_uva.fits
! AN table 1: 7 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.535714 visibilities/baseline/integration-bin.
! Found source: J1504-0249
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1080 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177c_uvs/J1504-0249_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002315Jy  sigma=34.916266
! Fit after  self-cal, rms=0.956758Jy  sigma=33.357553
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8836 mas, bmaj=1.85 mas, bpa=1.611 degrees
! Estimated noise=0.886191 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0309541 Jy
! Component: 100  -  total flux cleaned = 0.0439158 Jy
! Total flux subtracted in 100 components = 0.0439158 Jy
! Clean residual min=-0.006012 max=0.012629 Jy/beam
! Clean residual mean=-0.000031 rms=0.001958 Jy/beam
! Combined flux in latest and established models = 0.0439158 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0439158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035685Jy  sigma=1.049412
! Fit after  self-cal, rms=0.035044Jy  sigma=1.035827
! Inverting map 
! Added new window around map position (-6, 7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117453 Jy
! Component: 100  -  total flux cleaned = 0.0191269 Jy
! Total flux subtracted in 100 components = 0.0191269 Jy
! Clean residual min=-0.004730 max=0.005076 Jy/beam
! Clean residual mean=-0.000026 rms=0.001360 Jy/beam
! Combined flux in latest and established models = 0.0630427 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.0630427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029788Jy  sigma=0.841445
! Fit after  self-cal, rms=0.029666Jy  sigma=0.836461
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.037 mas, bmaj=2 mas, bpa=-1.553 degrees
! Estimated noise=0.640362 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0076042 Jy
! Component: 100  -  total flux cleaned = 0.0131374 Jy
! Component: 150  -  total flux cleaned = 0.0174617 Jy
! Component: 200  -  total flux cleaned = 0.021004 Jy
! Total flux subtracted in 200 components = 0.021004 Jy
! Clean residual min=-0.004428 max=0.005252 Jy/beam
! Clean residual mean=-0.000034 rms=0.001453 Jy/beam
! Combined flux in latest and established models = 0.0840467 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 36 components and 0.0840467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026526Jy  sigma=0.728235
! Fit after  self-cal, rms=0.026470Jy  sigma=0.725891
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.037 x 2 at -1.553 degrees (North through East)
! Clean map  min=-0.0043132  max=0.045083 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        1.18     LA        0.85     
!   MK        1.00     NL        0.88     OV        0.97     PT        0.86     
!   SC        0.97     
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.026470Jy  sigma=0.725891
! Fit after  self-cal, rms=0.026593Jy  sigma=0.732142
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.031 mas, bmaj=2.068 mas, bpa=1.9 degrees
! Estimated noise=0.657298 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312163 Jy
! Component: 100  -  total flux cleaned = 0.00551584 Jy
! Component: 150  -  total flux cleaned = 0.00750063 Jy
! Component: 200  -  total flux cleaned = 0.00917872 Jy
! Total flux subtracted in 200 components = 0.00917872 Jy
! Clean residual min=-0.004123 max=0.004812 Jy/beam
! Clean residual mean=-0.000031 rms=0.001343 Jy/beam
! Combined flux in latest and established models = 0.0932254 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 52 components and 0.0932254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025932Jy  sigma=0.712325
! Fit after  self-cal, rms=0.025922Jy  sigma=0.711772
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025922Jy  sigma=0.711772
! Fit after  self-cal, rms=0.025955Jy  sigma=0.711323
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.03 mas, bmaj=2.065 mas, bpa=1.949 degrees
! Estimated noise=0.658622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164905 Jy
! Component: 100  -  total flux cleaned = 0.00297383 Jy
! Component: 150  -  total flux cleaned = 0.00409289 Jy
! Component: 200  -  total flux cleaned = 0.00504346 Jy
! Total flux subtracted in 200 components = 0.00504346 Jy
! Clean residual min=-0.004064 max=0.004722 Jy/beam
! Clean residual mean=-0.000029 rms=0.001305 Jy/beam
! Combined flux in latest and established models = 0.0982689 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 55 components and 0.0982689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025738Jy  sigma=0.706461
! Fit after  self-cal, rms=0.025736Jy  sigma=0.706211
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000888668 Jy
! Component: 100  -  total flux cleaned = 0.00131064 Jy
! Component: 150  -  total flux cleaned = 0.00166878 Jy
! Component: 200  -  total flux cleaned = 0.00202491 Jy
! Total flux subtracted in 200 components = 0.00202491 Jy
! Clean residual min=-0.004043 max=0.004705 Jy/beam
! Clean residual mean=-0.000028 rms=0.001288 Jy/beam
! Combined flux in latest and established models = 0.100294 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 0.100294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025659Jy  sigma=0.704564
! Fit after  self-cal, rms=0.025661Jy  sigma=0.704437
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025661Jy  sigma=0.704437
! Fit after  self-cal, rms=0.025698Jy  sigma=0.704069
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=2.062 mas, bpa=1.97 degrees
! Estimated noise=0.659844 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000640634 Jy
! Component: 100  -  total flux cleaned = 0.000983631 Jy
! Component: 150  -  total flux cleaned = 0.0012309 Jy
! Component: 200  -  total flux cleaned = 0.00146241 Jy
! Total flux subtracted in 200 components = 0.00146241 Jy
! Clean residual min=-0.004014 max=0.004704 Jy/beam
! Clean residual mean=-0.000027 rms=0.001284 Jy/beam
! Combined flux in latest and established models = 0.101756 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 0.101756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025645Jy  sigma=0.703043
! Fit after  self-cal, rms=0.025648Jy  sigma=0.702941
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000269601 Jy
! Component: 100  -  total flux cleaned = 0.000432194 Jy
! Component: 150  -  total flux cleaned = 0.000583811 Jy
! Component: 200  -  total flux cleaned = 0.000761156 Jy
! Total flux subtracted in 200 components = 0.000761156 Jy
! Clean residual min=-0.004007 max=0.004679 Jy/beam
! Clean residual mean=-0.000027 rms=0.001276 Jy/beam
! Combined flux in latest and established models = 0.102517 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 58 components and 0.102517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025614Jy  sigma=0.702126
! Fit after  self-cal, rms=0.025617Jy  sigma=0.702032
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025617Jy  sigma=0.702032
! Fit after  self-cal, rms=0.025622Jy  sigma=0.701984
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.006 mas, bmaj=3.237 mas, bpa=-2.732 degrees
! Estimated noise=0.863899 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241697 Jy
! Component: 100  -  total flux cleaned = 0.00403969 Jy
! Component: 150  -  total flux cleaned = 0.00481574 Jy
! Component: 200  -  total flux cleaned = 0.00523353 Jy
! Total flux subtracted in 200 components = 0.00523353 Jy
! Clean residual min=-0.007305 max=0.008049 Jy/beam
! Clean residual mean=-0.000056 rms=0.002496 Jy/beam
! Combined flux in latest and established models = 0.107751 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 59 components and 0.107751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025601Jy  sigma=0.705324
! Fit after  self-cal, rms=0.025601Jy  sigma=0.705024
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000476207 Jy
! Component: 100  -  total flux cleaned = 0.000854388 Jy
! Component: 150  -  total flux cleaned = 0.00116317 Jy
! Component: 200  -  total flux cleaned = 0.00148286 Jy
! Total flux subtracted in 200 components = 0.00148286 Jy
! Clean residual min=-0.007246 max=0.007925 Jy/beam
! Clean residual mean=-0.000055 rms=0.002452 Jy/beam
! Combined flux in latest and established models = 0.109234 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 59 components and 0.109234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025607Jy  sigma=0.706664
! Fit after  self-cal, rms=0.025608Jy  sigma=0.706468
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=2.06 mas, bpa=1.974 degrees
! Estimated noise=0.659554 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.028 x 2.06 at 1.974 degrees (North through East)
! Clean map  min=-0.0040733  max=0.044446 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8801 mas, bmaj=1.84 mas, bpa=1.691 degrees
! Estimated noise=0.906417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0309734 Jy
! Component: 100  -  total flux cleaned = 0.0457451 Jy
! Component: 150  -  total flux cleaned = 0.0562347 Jy
! Component: 200  -  total flux cleaned = 0.0639242 Jy
! Total flux subtracted in 200 components = 0.0639242 Jy
! Clean residual min=-0.004518 max=0.005004 Jy/beam
! Clean residual mean=-0.000025 rms=0.001378 Jy/beam
! Combined flux in latest and established models = 0.0639242 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0639242 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=2.06 mas, bpa=1.974 degrees
! Estimated noise=0.659554 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00770716 Jy
! Component: 100  -  total flux cleaned = 0.013472 Jy
! Component: 150  -  total flux cleaned = 0.0180269 Jy
! Component: 200  -  total flux cleaned = 0.0217333 Jy
! Total flux subtracted in 200 components = 0.0217333 Jy
! Clean residual min=-0.004127 max=0.005366 Jy/beam
! Clean residual mean=-0.000035 rms=0.001476 Jy/beam
! Combined flux in latest and established models = 0.0856576 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 41 components and 0.0856576 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.006 mas, bmaj=3.237 mas, bpa=-2.732 degrees
! Estimated noise=0.863899 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00658627 Jy
! Component: 100  -  total flux cleaned = 0.0112591 Jy
! Component: 150  -  total flux cleaned = 0.0147467 Jy
! Component: 200  -  total flux cleaned = 0.0173985 Jy
! Total flux subtracted in 200 components = 0.0173985 Jy
! Clean residual min=-0.007115 max=0.008031 Jy/beam
! Clean residual mean=-0.000061 rms=0.002558 Jy/beam
! Combined flux in latest and established models = 0.103056 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206413 Jy
! Component: 100  -  total flux cleaned = 0.00367315 Jy
! Component: 150  -  total flux cleaned = 0.00474663 Jy
! Component: 200  -  total flux cleaned = 0.00514503 Jy
! Total flux subtracted in 200 components = 0.00514503 Jy
! Clean residual min=-0.007344 max=0.007932 Jy/beam
! Clean residual mean=-0.000056 rms=0.002458 Jy/beam
! Combined flux in latest and established models = 0.108201 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 49 components and 0.108201 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=2.06 mas, bpa=1.974 degrees
! Estimated noise=0.659554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000419973 Jy
! Component: 100  -  total flux cleaned = -0.000781256 Jy
! Component: 150  -  total flux cleaned = -0.000991194 Jy
! Component: 200  -  total flux cleaned = -0.00113519 Jy
! Total flux subtracted in 200 components = -0.00113519 Jy
! Clean residual min=-0.004047 max=0.004865 Jy/beam
! Clean residual mean=-0.000025 rms=0.001249 Jy/beam
! Combined flux in latest and established models = 0.107066 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 63 components and 0.107066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025600Jy  sigma=0.704773
! Fit after  self-cal, rms=0.025603Jy  sigma=0.704391
wmodel /d2/scr/pima/bp177c_uvs/J1504-0249_X_map.mod
! Writing 63 model components to file: /d2/scr/pima/bp177c_uvs/J1504-0249_X_map.mod
wobs /d2/scr/pima/bp177c_uvs/J1504-0249_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177c_uvs/J1504-0249_X_uvs.fits
wwins /d2/scr/pima/bp177c_uvs/J1504-0249_X_map.win
! wwins: Wrote 2 windows to /d2/scr/pima/bp177c_uvs/J1504-0249_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018984 Jy
! Component: 100  -  total flux cleaned = 0.00285653 Jy
! Component: 150  -  total flux cleaned = 0.00373649 Jy
! Component: 200  -  total flux cleaned = 0.00449396 Jy
! Component: 250  -  total flux cleaned = 0.00519951 Jy
! Component: 300  -  total flux cleaned = 0.00591286 Jy
! Component: 350  -  total flux cleaned = 0.00669087 Jy
! Component: 400  -  total flux cleaned = 0.00743058 Jy
! Component: 450  -  total flux cleaned = 0.00808795 Jy
! Component: 500  -  total flux cleaned = 0.00875844 Jy
! Component: 550  -  total flux cleaned = 0.00922843 Jy
! Component: 600  -  total flux cleaned = 0.00967886 Jy
! Component: 650  -  total flux cleaned = 0.01003 Jy
! Component: 700  -  total flux cleaned = 0.0103667 Jy
! Component: 750  -  total flux cleaned = 0.010583 Jy
! Component: 800  -  total flux cleaned = 0.0108244 Jy
! Component: 850  -  total flux cleaned = 0.010958 Jy
! Component: 900  -  total flux cleaned = 0.0110558 Jy
! Component: 950  -  total flux cleaned = 0.0112434 Jy
! Component: 1000  -  total flux cleaned = 0.0113639 Jy
! Component: 1050  -  total flux cleaned = 0.0114506 Jy
! Component: 1100  -  total flux cleaned = 0.0115347 Jy
! Component: 1150  -  total flux cleaned = 0.011589 Jy
! Component: 1200  -  total flux cleaned = 0.0116941 Jy
! Component: 1250  -  total flux cleaned = 0.0117956 Jy
! Component: 1300  -  total flux cleaned = 0.0117953 Jy
! Component: 1350  -  total flux cleaned = 0.0118429 Jy
! Component: 1400  -  total flux cleaned = 0.0118664 Jy
! Component: 1450  -  total flux cleaned = 0.0118214 Jy
! Component: 1500  -  total flux cleaned = 0.0118222 Jy
! Component: 1550  -  total flux cleaned = 0.011886 Jy
! Component: 1600  -  total flux cleaned = 0.0118851 Jy
! Component: 1650  -  total flux cleaned = 0.0119053 Jy
! Component: 1700  -  total flux cleaned = 0.0119251 Jy
! Component: 1750  -  total flux cleaned = 0.0119443 Jy
! Component: 1800  -  total flux cleaned = 0.0119633 Jy
! Component: 1850  -  total flux cleaned = 0.0119821 Jy
! Component: 1900  -  total flux cleaned = 0.0120005 Jy
! Component: 1950  -  total flux cleaned = 0.0120183 Jy
! Component: 2000  -  total flux cleaned = 0.0120358 Jy
! Component: 2050  -  total flux cleaned = 0.0120358 Jy
! Component: 2100  -  total flux cleaned = 0.012052 Jy
! Component: 2150  -  total flux cleaned = 0.012002 Jy
! Component: 2200  -  total flux cleaned = 0.0119694 Jy
! Component: 2250  -  total flux cleaned = 0.0119693 Jy
! Component: 2300  -  total flux cleaned = 0.0119537 Jy
! Component: 2350  -  total flux cleaned = 0.0119388 Jy
! Component: 2400  -  total flux cleaned = 0.0119087 Jy
! Component: 2450  -  total flux cleaned = 0.0119087 Jy
! Component: 2500  -  total flux cleaned = 0.0119089 Jy
! Component: 2550  -  total flux cleaned = 0.011952 Jy
! Component: 2600  -  total flux cleaned = 0.0119234 Jy
! Component: 2650  -  total flux cleaned = 0.0119798 Jy
! Component: 2700  -  total flux cleaned = 0.0119936 Jy
! Component: 2750  -  total flux cleaned = 0.0119662 Jy
! Component: 2800  -  total flux cleaned = 0.0120472 Jy
! Component: 2850  -  total flux cleaned = 0.0120472 Jy
! Component: 2900  -  total flux cleaned = 0.0120604 Jy
! Component: 2950  -  total flux cleaned = 0.0120995 Jy
! Component: 3000  -  total flux cleaned = 0.0121253 Jy
! Component: 3050  -  total flux cleaned = 0.0121507 Jy
! Component: 3100  -  total flux cleaned = 0.0121884 Jy
! Component: 3150  -  total flux cleaned = 0.0122258 Jy
! Component: 3200  -  total flux cleaned = 0.0122628 Jy
! Component: 3250  -  total flux cleaned = 0.0123239 Jy
! Component: 3300  -  total flux cleaned = 0.012348 Jy
! Component: 3350  -  total flux cleaned = 0.012396 Jy
! Component: 3400  -  total flux cleaned = 0.0124199 Jy
! Component: 3450  -  total flux cleaned = 0.0124318 Jy
! Component: 3500  -  total flux cleaned = 0.0124903 Jy
! Component: 3550  -  total flux cleaned = 0.012502 Jy
! Component: 3600  -  total flux cleaned = 0.0125136 Jy
! Component: 3650  -  total flux cleaned = 0.0125366 Jy
! Component: 3700  -  total flux cleaned = 0.0125366 Jy
! Component: 3750  -  total flux cleaned = 0.0125365 Jy
! Component: 3800  -  total flux cleaned = 0.0125252 Jy
! Component: 3850  -  total flux cleaned = 0.0125589 Jy
! Component: 3900  -  total flux cleaned = 0.0125921 Jy
! Component: 3950  -  total flux cleaned = 0.0125698 Jy
! Component: 4000  -  total flux cleaned = 0.0125478 Jy
! Component: 4050  -  total flux cleaned = 0.0125697 Jy
! Total flux subtracted in 4096 components = 0.0125806 Jy
! Clean residual min=-0.000636 max=0.000706 Jy/beam
! Clean residual mean=-0.000002 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.119647 Jy
keep
! Adding 329 model components to the UV plane model.
! The established model now contains 392 components and 0.119647 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177c_uvs/J1504-0249_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.028 x 2.06 at 1.974 degrees (North through East)
! Clean map  min=-0.001215  max=0.044336 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177c_uvs/J1504-0249_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0443364 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000163096 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.10358 1.10358 2.20716 4.41432 8.82864 17.6573 35.3146 70.6291
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.044 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  271.842 
quit
! Quitting program
! Log file /d2/scr/pima/bp177c_uvs/J1504-0249_X_uvs.log closed on Sat Mar 22 21:17:37 2014