! Started logfile: /d2/scr/pima/bp177c_uvs/J1504+2218_X_uvs.log on Sat Mar 22 21:17:27 2014
obs /d2/scr/pima/bp177c_uvs/J1504+2218_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177c_uvs/J1504+2218_X_uva.fits
! AN table 1: 5 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.838889 visibilities/baseline/integration-bin.
! Found source: J1504+2218
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1208 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177c_uvs/J1504+2218_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004938Jy  sigma=37.974379
! Fit after  self-cal, rms=0.937795Jy  sigma=35.463179
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7941 mas, bmaj=2.103 mas, bpa=16.32 degrees
! Estimated noise=0.747305 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0435173 Jy
! Component: 100  -  total flux cleaned = 0.0574773 Jy
! Total flux subtracted in 100 components = 0.0574773 Jy
! Clean residual min=-0.003583 max=0.006290 Jy/beam
! Clean residual mean=-0.000027 rms=0.001103 Jy/beam
! Combined flux in latest and established models = 0.0574774 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0574774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022952Jy  sigma=0.818100
! Fit after  self-cal, rms=0.022870Jy  sigma=0.814705
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00726216 Jy
! Component: 100  -  total flux cleaned = 0.0113916 Jy
! Total flux subtracted in 100 components = 0.0113916 Jy
! Clean residual min=-0.002964 max=0.003157 Jy/beam
! Clean residual mean=-0.000017 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.068869 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 19 components and 0.068869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018938Jy  sigma=0.672201
! Fit after  self-cal, rms=0.018914Jy  sigma=0.671083
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9834 mas, bmaj=2.253 mas, bpa=15.08 degrees
! Estimated noise=0.546404 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00475826 Jy
! Component: 100  -  total flux cleaned = 0.00770514 Jy
! Component: 150  -  total flux cleaned = 0.0098428 Jy
! Component: 200  -  total flux cleaned = 0.0114128 Jy
! Total flux subtracted in 200 components = 0.0114128 Jy
! Clean residual min=-0.002957 max=0.002529 Jy/beam
! Clean residual mean=-0.000011 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.0802818 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 46 components and 0.0802818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017320Jy  sigma=0.620437
! Fit after  self-cal, rms=0.017313Jy  sigma=0.620074
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9834 x 2.253 at 15.08 degrees (North through East)
! Clean map  min=-0.002756  max=0.060081 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.11     HN        1.03     LA        1.03     
!   MK        0.95     NL        1.06     OV        0.96     PT        0.85     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.97     HN        1.09     LA        0.96     
!   MK        1.03     NL        1.02     OV        0.93     PT        0.88     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        1.13     LA        0.98     
!   MK        1.05     NL        1.04     OV        1.03     PT        0.91     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.12     LA        0.97     
!   MK        0.92     NL        0.92     OV        0.98     PT        0.86     
!   SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.19     LA        0.92     
!   MK        1.03     NL        0.98     OV        1.05     PT        0.92     
!   SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.017313Jy  sigma=0.620074
! Fit after  self-cal, rms=0.016387Jy  sigma=0.586787
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9874 mas, bmaj=2.273 mas, bpa=15.26 degrees
! Estimated noise=0.542895 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000218351 Jy
! Component: 100  -  total flux cleaned = 0.000243951 Jy
! Component: 150  -  total flux cleaned = 0.000233567 Jy
! Component: 200  -  total flux cleaned = 0.000243368 Jy
! Total flux subtracted in 200 components = 0.000243368 Jy
! Clean residual min=-0.001988 max=0.001570 Jy/beam
! Clean residual mean=-0.000003 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.0805252 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 53 components and 0.0805252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016367Jy  sigma=0.586179
! Fit after  self-cal, rms=0.016366Jy  sigma=0.586032
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016366Jy  sigma=0.586032
! Fit after  self-cal, rms=0.016371Jy  sigma=0.586007
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9865 mas, bmaj=2.272 mas, bpa=15.3 degrees
! Estimated noise=0.543093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000170499 Jy
! Component: 100  -  total flux cleaned = 0.000170557 Jy
! Component: 150  -  total flux cleaned = 0.000188559 Jy
! Component: 200  -  total flux cleaned = 0.000197255 Jy
! Total flux subtracted in 200 components = 0.000197255 Jy
! Clean residual min=-0.001977 max=0.001553 Jy/beam
! Clean residual mean=-0.000003 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.0807224 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 57 components and 0.0807224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016359Jy  sigma=0.585629
! Fit after  self-cal, rms=0.016358Jy  sigma=0.585578
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.84265e-05 Jy
! Component: 100  -  total flux cleaned = 2.7467e-05 Jy
! Component: 150  -  total flux cleaned = 3.54832e-05 Jy
! Component: 200  -  total flux cleaned = 5.0659e-05 Jy
! Total flux subtracted in 200 components = 5.0659e-05 Jy
! Clean residual min=-0.001962 max=0.001553 Jy/beam
! Clean residual mean=-0.000003 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.0807731 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 59 components and 0.0807731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016349Jy  sigma=0.585268
! Fit after  self-cal, rms=0.016348Jy  sigma=0.585226
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016348Jy  sigma=0.585226
! Fit after  self-cal, rms=0.016346Jy  sigma=0.585206
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9857 mas, bmaj=2.271 mas, bpa=15.33 degrees
! Estimated noise=0.543014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105798 Jy
! Component: 100  -  total flux cleaned = 0.000138954 Jy
! Component: 150  -  total flux cleaned = 0.000161307 Jy
! Component: 200  -  total flux cleaned = 0.000175464 Jy
! Total flux subtracted in 200 components = 0.000175464 Jy
! Clean residual min=-0.001953 max=0.001552 Jy/beam
! Clean residual mean=-0.000003 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.0809486 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 60 components and 0.0809486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016338Jy  sigma=0.584958
! Fit after  self-cal, rms=0.016337Jy  sigma=0.584926
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.63746e-06 Jy
! Component: 100  -  total flux cleaned = 1.09056e-05 Jy
! Component: 150  -  total flux cleaned = 1.75539e-05 Jy
! Component: 200  -  total flux cleaned = 2.40535e-05 Jy
! Total flux subtracted in 200 components = 2.40535e-05 Jy
! Clean residual min=-0.001938 max=0.001555 Jy/beam
! Clean residual mean=-0.000003 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.0809726 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 60 components and 0.0809726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016331Jy  sigma=0.584700
! Fit after  self-cal, rms=0.016331Jy  sigma=0.584674
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016331Jy  sigma=0.584674
! Fit after  self-cal, rms=0.016327Jy  sigma=0.584660
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.981 mas, bmaj=2.859 mas, bpa=6.439 degrees
! Estimated noise=0.680798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000805826 Jy
! Component: 100  -  total flux cleaned = 0.000935044 Jy
! Component: 150  -  total flux cleaned = 0.000985038 Jy
! Component: 200  -  total flux cleaned = 0.00100742 Jy
! Total flux subtracted in 200 components = 0.00100742 Jy
! Clean residual min=-0.002213 max=0.002126 Jy/beam
! Clean residual mean=-0.000004 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.08198 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 66 components and 0.08198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016345Jy  sigma=0.585937
! Fit after  self-cal, rms=0.016341Jy  sigma=0.585673
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000117307 Jy
! Component: 100  -  total flux cleaned = 8.50834e-05 Jy
! Component: 150  -  total flux cleaned = 8.4859e-05 Jy
! Component: 200  -  total flux cleaned = 9.28871e-05 Jy
! Total flux subtracted in 200 components = 9.28871e-05 Jy
! Clean residual min=-0.002153 max=0.002125 Jy/beam
! Clean residual mean=-0.000004 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.0820729 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 73 components and 0.0820729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016364Jy  sigma=0.586529
! Fit after  self-cal, rms=0.016363Jy  sigma=0.586398
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.985 mas, bmaj=2.27 mas, bpa=15.35 degrees
! Estimated noise=0.54285 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.985 x 2.27 at 15.35 degrees (North through East)
! Clean map  min=-0.0017058  max=0.059033 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7939 mas, bmaj=2.121 mas, bpa=16.55 degrees
! Estimated noise=0.749251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0435973 Jy
! Component: 100  -  total flux cleaned = 0.0581997 Jy
! Component: 150  -  total flux cleaned = 0.0654007 Jy
! Component: 200  -  total flux cleaned = 0.0694649 Jy
! Total flux subtracted in 200 components = 0.0694649 Jy
! Clean residual min=-0.002096 max=0.002979 Jy/beam
! Clean residual mean=-0.000011 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.0694649 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0694649 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.985 mas, bmaj=2.27 mas, bpa=15.35 degrees
! Estimated noise=0.54285 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00431096 Jy
! Component: 100  -  total flux cleaned = 0.00677578 Jy
! Component: 150  -  total flux cleaned = 0.0083494 Jy
! Component: 200  -  total flux cleaned = 0.00951931 Jy
! Total flux subtracted in 200 components = 0.00951931 Jy
! Clean residual min=-0.001774 max=0.001709 Jy/beam
! Clean residual mean=-0.000006 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.0789843 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 52 components and 0.0789843 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.981 mas, bmaj=2.859 mas, bpa=6.439 degrees
! Estimated noise=0.680798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164375 Jy
! Component: 100  -  total flux cleaned = 0.00260196 Jy
! Component: 150  -  total flux cleaned = 0.00326873 Jy
! Component: 200  -  total flux cleaned = 0.00371667 Jy
! Total flux subtracted in 200 components = 0.00371667 Jy
! Clean residual min=-0.001773 max=0.002160 Jy/beam
! Clean residual mean=-0.000002 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.0827009 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (23.6, -34.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147768 Jy
! Component: 100  -  total flux cleaned = 0.00155811 Jy
! Component: 150  -  total flux cleaned = 0.00167027 Jy
! Component: 200  -  total flux cleaned = 0.00181925 Jy
! Total flux subtracted in 200 components = 0.00181925 Jy
! Clean residual min=-0.001597 max=0.001282 Jy/beam
! Clean residual mean=-0.000001 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.0845202 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 104 components and 0.0845202 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.985 mas, bmaj=2.27 mas, bpa=15.35 degrees
! Estimated noise=0.54285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00020702 Jy
! Component: 100  -  total flux cleaned = 0.000232931 Jy
! Component: 150  -  total flux cleaned = 0.000232173 Jy
! Component: 200  -  total flux cleaned = 0.000272834 Jy
! Total flux subtracted in 200 components = 0.000272834 Jy
! Clean residual min=-0.001439 max=0.001275 Jy/beam
! Clean residual mean=-0.000001 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.084793 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 126 components and 0.084793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016010Jy  sigma=0.574253
! Fit after  self-cal, rms=0.015985Jy  sigma=0.572957
wmodel /d2/scr/pima/bp177c_uvs/J1504+2218_X_map.mod
! Writing 126 model components to file: /d2/scr/pima/bp177c_uvs/J1504+2218_X_map.mod
wobs /d2/scr/pima/bp177c_uvs/J1504+2218_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177c_uvs/J1504+2218_X_uvs.fits
wwins /d2/scr/pima/bp177c_uvs/J1504+2218_X_map.win
! wwins: Wrote 3 windows to /d2/scr/pima/bp177c_uvs/J1504+2218_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000513385 Jy
! Component: 100  -  total flux cleaned = -0.000685899 Jy
! Component: 150  -  total flux cleaned = -0.000786177 Jy
! Component: 200  -  total flux cleaned = -0.000842777 Jy
! Component: 250  -  total flux cleaned = -0.000897151 Jy
! Component: 300  -  total flux cleaned = -0.000966683 Jy
! Component: 350  -  total flux cleaned = -0.00101642 Jy
! Component: 400  -  total flux cleaned = -0.00103254 Jy
! Component: 450  -  total flux cleaned = -0.00103233 Jy
! Component: 500  -  total flux cleaned = -0.00101725 Jy
! Component: 550  -  total flux cleaned = -0.00101717 Jy
! Component: 600  -  total flux cleaned = -0.00098826 Jy
! Component: 650  -  total flux cleaned = -0.000973938 Jy
! Component: 700  -  total flux cleaned = -0.000946296 Jy
! Component: 750  -  total flux cleaned = -0.000946626 Jy
! Component: 800  -  total flux cleaned = -0.000920379 Jy
! Component: 850  -  total flux cleaned = -0.000881722 Jy
! Component: 900  -  total flux cleaned = -0.00085603 Jy
! Component: 950  -  total flux cleaned = -0.000781606 Jy
! Component: 1000  -  total flux cleaned = -0.000769411 Jy
! Component: 1050  -  total flux cleaned = -0.000745407 Jy
! Component: 1100  -  total flux cleaned = -0.000698247 Jy
! Component: 1150  -  total flux cleaned = -0.000663806 Jy
! Component: 1200  -  total flux cleaned = -0.000618718 Jy
! Component: 1250  -  total flux cleaned = -0.000574289 Jy
! Component: 1300  -  total flux cleaned = -0.000552623 Jy
! Component: 1350  -  total flux cleaned = -0.000509899 Jy
! Component: 1400  -  total flux cleaned = -0.000488801 Jy
! Component: 1450  -  total flux cleaned = -0.000416406 Jy
! Component: 1500  -  total flux cleaned = -0.000386001 Jy
! Component: 1550  -  total flux cleaned = -0.000295764 Jy
! Component: 1600  -  total flux cleaned = -0.00023669 Jy
! Component: 1650  -  total flux cleaned = -0.000207395 Jy
! Component: 1700  -  total flux cleaned = -0.000140218 Jy
! Component: 1750  -  total flux cleaned = -9.28449e-05 Jy
! Component: 1800  -  total flux cleaned = -1.78939e-05 Jy
! Component: 1850  -  total flux cleaned = 4.70385e-05 Jy
! Component: 1900  -  total flux cleaned = 0.00011138 Jy
! Component: 1950  -  total flux cleaned = 0.000202208 Jy
! Component: 2000  -  total flux cleaned = 0.000246989 Jy
! Component: 2050  -  total flux cleaned = 0.000309263 Jy
! Component: 2100  -  total flux cleaned = 0.000335798 Jy
! Component: 2150  -  total flux cleaned = 0.000414255 Jy
! Component: 2200  -  total flux cleaned = 0.000466022 Jy
! Component: 2250  -  total flux cleaned = 0.000508775 Jy
! Component: 2300  -  total flux cleaned = 0.000542705 Jy
! Component: 2350  -  total flux cleaned = 0.000576322 Jy
! Component: 2400  -  total flux cleaned = 0.000634517 Jy
! Component: 2450  -  total flux cleaned = 0.000675702 Jy
! Component: 2500  -  total flux cleaned = 0.000667527 Jy
! Component: 2550  -  total flux cleaned = 0.000740475 Jy
! Component: 2600  -  total flux cleaned = 0.000756647 Jy
! Component: 2650  -  total flux cleaned = 0.000748678 Jy
! Component: 2700  -  total flux cleaned = 0.000764561 Jy
! Component: 2750  -  total flux cleaned = 0.000788209 Jy
! Component: 2800  -  total flux cleaned = 0.000827142 Jy
! Component: 2850  -  total flux cleaned = 0.000788306 Jy
! Component: 2900  -  total flux cleaned = 0.000819072 Jy
! Component: 2950  -  total flux cleaned = 0.000803786 Jy
! Component: 3000  -  total flux cleaned = 0.000818941 Jy
! Component: 3050  -  total flux cleaned = 0.000818962 Jy
! Component: 3100  -  total flux cleaned = 0.000849065 Jy
! Component: 3150  -  total flux cleaned = 0.000856554 Jy
! Component: 3200  -  total flux cleaned = 0.000871441 Jy
! Component: 3250  -  total flux cleaned = 0.000893679 Jy
! Component: 3300  -  total flux cleaned = 0.000901093 Jy
! Component: 3350  -  total flux cleaned = 0.00094519 Jy
! Component: 3400  -  total flux cleaned = 0.000967158 Jy
! Component: 3450  -  total flux cleaned = 0.000996383 Jy
! Component: 3500  -  total flux cleaned = 0.00102544 Jy
! Component: 3550  -  total flux cleaned = 0.00105439 Jy
! Component: 3600  -  total flux cleaned = 0.00109048 Jy
! Component: 3650  -  total flux cleaned = 0.00110494 Jy
! Component: 3700  -  total flux cleaned = 0.00115516 Jy
! Component: 3750  -  total flux cleaned = 0.00117662 Jy
! Component: 3800  -  total flux cleaned = 0.00121224 Jy
! Component: 3850  -  total flux cleaned = 0.00124776 Jy
! Component: 3900  -  total flux cleaned = 0.00124065 Jy
! Component: 3950  -  total flux cleaned = 0.00127605 Jy
! Component: 4000  -  total flux cleaned = 0.00131839 Jy
! Component: 4050  -  total flux cleaned = 0.00134654 Jy
! Total flux subtracted in 4096 components = 0.00137468 Jy
! Clean residual min=-0.000471 max=0.000435 Jy/beam
! Clean residual mean=0.000002 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.0861677 Jy
keep
! Adding 244 model components to the UV plane model.
! The established model now contains 370 components and 0.0861677 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177c_uvs/J1504+2218_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.985 x 2.27 at 15.35 degrees (North through East)
! Clean map  min=-0.00079835  max=0.059408 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177c_uvs/J1504+2218_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.059408 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00010983 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.554624 0.554624 1.10925 2.2185 4.437 8.87399 17.748 35.496 70.9919
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.059 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  540.906 
quit
! Quitting program
! Log file /d2/scr/pima/bp177c_uvs/J1504+2218_X_uvs.log closed on Sat Mar 22 21:17:31 2014