! Started logfile: /d2/scr/pima/bp177c_uvs/J1325-4301_C_uvs.log on Sat Mar 22 21:15:31 2014
obs /d2/scr/pima/bp177c_uvs/J1325-4301_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177c_uvs/J1325-4301_C_uva.fits
! AN table 1: 3 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J1325-4301
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 336 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177c_uvs/J1325-4301_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.428469Jy  sigma=32.060109
! Fit after  self-cal, rms=0.996391Jy  sigma=21.516086
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.512 mas, bmaj=11.79 mas, bpa=7.376 degrees
! Estimated noise=2.8831 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.279393 Jy
! Component: 100  -  total flux cleaned = 0.496809 Jy
! Total flux subtracted in 100 components = 0.496809 Jy
! Clean residual min=-0.097833 max=0.133557 Jy/beam
! Clean residual mean=-0.000586 rms=0.062347 Jy/beam
! Combined flux in latest and established models = 0.496809 Jy
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 79 components and 0.496809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.810949Jy  sigma=19.709383
! Fit after  self-cal, rms=0.810481Jy  sigma=19.703098
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.077 mas, bmaj=12.82 mas, bpa=6.687 degrees
! Estimated noise=1.91127 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.483888 Jy
! Component: 100  -  total flux cleaned = 0.823826 Jy
! Component: 150  -  total flux cleaned = 0.978953 Jy
! Component: 200  -  total flux cleaned = 1.03909 Jy
! Total flux subtracted in 200 components = 1.03909 Jy
! Clean residual min=-0.127774 max=0.127623 Jy/beam
! Clean residual mean=0.000455 rms=0.087153 Jy/beam
! Combined flux in latest and established models = 1.5359 Jy
! Performing phase self-cal
! Adding 188 model components to the UV plane model.
! The established model now contains 264 components and 1.5359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.391070Jy  sigma=9.592779
! Fit after  self-cal, rms=0.390896Jy  sigma=9.589625
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.077 x 12.82 at 6.687 degrees (North through East)
! Clean map  min=-0.1466  max=0.37305 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.390896Jy  sigma=9.589625
! Fit after  self-cal, rms=0.390896Jy  sigma=9.589625
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.077 mas, bmaj=12.82 mas, bpa=6.687 degrees
! Estimated noise=1.91127 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0263651 Jy
! Component: 100  -  total flux cleaned = -0.0354247 Jy
! Component: 150  -  total flux cleaned = -0.112517 Jy
! Component: 200  -  total flux cleaned = -0.20631 Jy
! Total flux subtracted in 200 components = -0.20631 Jy
! Clean residual min=-0.077786 max=0.076917 Jy/beam
! Clean residual mean=0.000318 rms=0.051300 Jy/beam
! Combined flux in latest and established models = 1.32959 Jy
! Performing phase self-cal
! Adding 170 model components to the UV plane model.
! The established model now contains 432 components and 1.32959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.237004Jy  sigma=5.767588
! Fit after  self-cal, rms=0.236889Jy  sigma=5.765926
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.236889Jy  sigma=5.765926
! Fit after  self-cal, rms=0.222962Jy  sigma=5.412849
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.079 mas, bmaj=12.93 mas, bpa=6.786 degrees
! Estimated noise=1.92659 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0092323 Jy
! Component: 100  -  total flux cleaned = 0.0217671 Jy
! Component: 150  -  total flux cleaned = 0.0513632 Jy
! Component: 200  -  total flux cleaned = 0.0400187 Jy
! Total flux subtracted in 200 components = 0.0400187 Jy
! Clean residual min=-0.034935 max=0.034905 Jy/beam
! Clean residual mean=0.000136 rms=0.024088 Jy/beam
! Combined flux in latest and established models = 1.3696 Jy
selfcal
! Performing phase self-cal
! Adding 195 model components to the UV plane model.
! The established model now contains 623 components and 1.3696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.163739Jy  sigma=4.005165
! Fit after  self-cal, rms=0.163709Jy  sigma=4.004832
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133261 Jy
! Component: 100  -  total flux cleaned = 0.00615195 Jy
! Component: 150  -  total flux cleaned = -0.0207608 Jy
! Component: 200  -  total flux cleaned = -0.0499106 Jy
! Total flux subtracted in 200 components = -0.0499106 Jy
! Clean residual min=-0.020707 max=0.020466 Jy/beam
! Clean residual mean=0.000056 rms=0.013437 Jy/beam
! Combined flux in latest and established models = 1.31969 Jy
! Performing phase self-cal
! Adding 157 model components to the UV plane model.
! The established model now contains 770 components and 1.31969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.138522Jy  sigma=3.491022
! Fit after  self-cal, rms=0.138473Jy  sigma=3.490385
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.138473Jy  sigma=3.490385
! Fit after  self-cal, rms=0.053518Jy  sigma=1.343741
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.1 mas, bmaj=12.99 mas, bpa=6.791 degrees
! Estimated noise=1.90569 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000134956 Jy
! Component: 100  -  total flux cleaned = 0.000843932 Jy
! Component: 150  -  total flux cleaned = 4.48053e-05 Jy
! Component: 200  -  total flux cleaned = -0.00180516 Jy
! Total flux subtracted in 200 components = -0.00180516 Jy
! Clean residual min=-0.003714 max=0.003665 Jy/beam
! Clean residual mean=-0.000072 rms=0.002070 Jy/beam
! Combined flux in latest and established models = 1.31789 Jy
selfcal
! Performing phase self-cal
! Adding 105 model components to the UV plane model.
! The established model now contains 874 components and 1.31789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051126Jy  sigma=1.281118
! Fit after  self-cal, rms=0.051105Jy  sigma=1.280725
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00283647 Jy
! Component: 100  -  total flux cleaned = -0.00660239 Jy
! Component: 150  -  total flux cleaned = -0.0104478 Jy
! Component: 200  -  total flux cleaned = -0.0142841 Jy
! Total flux subtracted in 200 components = -0.0142841 Jy
! Clean residual min=-0.002517 max=0.002462 Jy/beam
! Clean residual mean=-0.000065 rms=0.001278 Jy/beam
! Combined flux in latest and established models = 1.3036 Jy
! Performing phase self-cal
! Adding 99 model components to the UV plane model.
! The established model now contains 970 components and 1.3036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050393Jy  sigma=1.261764
! Fit after  self-cal, rms=0.050380Jy  sigma=1.261628
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050380Jy  sigma=1.261628
! Fit after  self-cal, rms=0.031953Jy  sigma=0.610189
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.239 mas, bmaj=16.54 mas, bpa=-2.772 degrees
! Estimated noise=2.16142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.86312e-05 Jy
! Component: 100  -  total flux cleaned = -0.000389082 Jy
! Component: 150  -  total flux cleaned = -0.000604969 Jy
! Component: 200  -  total flux cleaned = -0.00082491 Jy
! Total flux subtracted in 200 components = -0.00082491 Jy
! Clean residual min=-0.001205 max=0.001223 Jy/beam
! Clean residual mean=-0.000002 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 1.30278 Jy
selfcal
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 1026 components and 1.30278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031761Jy  sigma=0.607233
! Fit after  self-cal, rms=0.031762Jy  sigma=0.606734
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205322 Jy
! Component: 100  -  total flux cleaned = 0.000208597 Jy
! Component: 150  -  total flux cleaned = 5.03168e-05 Jy
! Component: 200  -  total flux cleaned = -0.000105027 Jy
! Total flux subtracted in 200 components = -0.000105027 Jy
! Clean residual min=-0.000850 max=0.000851 Jy/beam
! Clean residual mean=-0.000004 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 1.30268 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 1085 components and 1.30268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031619Jy  sigma=0.604389
! Fit after  self-cal, rms=0.031615Jy  sigma=0.604290
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.104 mas, bmaj=12.96 mas, bpa=6.738 degrees
! Estimated noise=1.90189 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.104 x 12.96 at 6.738 degrees (North through East)
! Clean map  min=-0.033538  max=0.25235 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.529 mas, bmaj=11.89 mas, bpa=7.518 degrees
! Estimated noise=2.92924 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.28358 Jy
! Component: 100  -  total flux cleaned = 0.502324 Jy
! Component: 150  -  total flux cleaned = 0.688847 Jy
! Component: 200  -  total flux cleaned = 0.851143 Jy
! Total flux subtracted in 200 components = 0.851143 Jy
! Clean residual min=-0.079274 max=0.100934 Jy/beam
! Clean residual mean=-0.000302 rms=0.050315 Jy/beam
! Combined flux in latest and established models = 0.851143 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 161 model components to the UV plane model.
! The established model now contains 161 components and 0.851143 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.104 mas, bmaj=12.96 mas, bpa=6.738 degrees
! Estimated noise=1.90189 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.358896 Jy
! Component: 100  -  total flux cleaned = 0.573759 Jy
! Component: 150  -  total flux cleaned = 0.661429 Jy
! Component: 200  -  total flux cleaned = 0.720434 Jy
! Total flux subtracted in 200 components = 0.720434 Jy
! Clean residual min=-0.098503 max=0.098738 Jy/beam
! Clean residual mean=0.000455 rms=0.067271 Jy/beam
! Combined flux in latest and established models = 1.57158 Jy
! Adding 190 model components to the UV plane model.
! The established model now contains 346 components and 1.57158 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.239 mas, bmaj=16.54 mas, bpa=-2.772 degrees
! Estimated noise=2.16142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0239315 Jy
! Component: 100  -  total flux cleaned = -0.134627 Jy
! Component: 150  -  total flux cleaned = -0.244274 Jy
! Component: 200  -  total flux cleaned = -0.334922 Jy
! Total flux subtracted in 200 components = -0.334922 Jy
! Clean residual min=-0.064611 max=0.062969 Jy/beam
! Clean residual mean=0.000125 rms=0.039855 Jy/beam
! Combined flux in latest and established models = 1.23666 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0810948 Jy
! Component: 100  -  total flux cleaned = -0.141889 Jy
! Component: 150  -  total flux cleaned = -0.152346 Jy
! Component: 200  -  total flux cleaned = -0.160187 Jy
! Total flux subtracted in 200 components = -0.160187 Jy
! Clean residual min=-0.043583 max=0.043758 Jy/beam
! Clean residual mean=-0.000234 rms=0.020181 Jy/beam
! Combined flux in latest and established models = 1.07647 Jy
! Adding 238 model components to the UV plane model.
! The established model now contains 583 components and 1.07647 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.104 mas, bmaj=12.96 mas, bpa=6.738 degrees
! Estimated noise=1.90189 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0264276 Jy
! Component: 100  -  total flux cleaned = -0.0296834 Jy
! Component: 150  -  total flux cleaned = -0.0297383 Jy
! Component: 200  -  total flux cleaned = -0.0303494 Jy
! Total flux subtracted in 200 components = -0.0303494 Jy
! Clean residual min=-0.009457 max=0.009459 Jy/beam
! Clean residual mean=0.000031 rms=0.004535 Jy/beam
! Combined flux in latest and established models = 1.04612 Jy
selfcal
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 666 components and 1.04612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045580Jy  sigma=0.936837
! Fit after  self-cal, rms=0.044370Jy  sigma=0.913969
wmodel /d2/scr/pima/bp177c_uvs/J1325-4301_C_map.mod
! Writing 666 model components to file: /d2/scr/pima/bp177c_uvs/J1325-4301_C_map.mod
wobs /d2/scr/pima/bp177c_uvs/J1325-4301_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177c_uvs/J1325-4301_C_uvs.fits
wwins /d2/scr/pima/bp177c_uvs/J1325-4301_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177c_uvs/J1325-4301_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.104 x 12.96 at 6.738 degrees (North through East)
! Clean map  min=-0.061535  max=0.26588 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177c_uvs/J1325-4301_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.265879 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00455719 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -5.14203 5.14203 10.2841 20.5681 41.1363 82.2725
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0136 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.265 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  58.342 
quit
! Quitting program
! Log file /d2/scr/pima/bp177c_uvs/J1325-4301_C_uvs.log closed on Sat Mar 22 21:15:35 2014