! Started logfile: /d2/scr/pima/bp177b_uvs/J1324-3623_X_uvs.log on Sat Mar 22 08:09:57 2014
obs /d2/scr/pima/bp177b_uvs/J1324-3623_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177b_uvs/J1324-3623_X_uva.fits
! AN table 1: 3 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.866667 visibilities/baseline/integration-bin.
! Found source: J1324-3623
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 312 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177b_uvs/J1324-3623_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.003090Jy  sigma=22.787080
! Fit after  self-cal, rms=0.955244Jy  sigma=21.644341
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.421 mas, bmaj=18.98 mas, bpa=-15.94 degrees
! Estimated noise=2.34881 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0338445 Jy
! Component: 100  -  total flux cleaned = 0.0412359 Jy
! Total flux subtracted in 100 components = 0.0412359 Jy
! Clean residual min=-0.004775 max=0.004847 Jy/beam
! Clean residual mean=-0.000028 rms=0.001854 Jy/beam
! Combined flux in latest and established models = 0.0412359 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.0412359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027544Jy  sigma=0.569085
! Fit after  self-cal, rms=0.027079Jy  sigma=0.560993
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.764 mas, bmaj=20 mas, bpa=-16.48 degrees
! Estimated noise=1.81612 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00642227 Jy
! Component: 100  -  total flux cleaned = 0.00742358 Jy
! Component: 150  -  total flux cleaned = 0.0076768 Jy
! Component: 200  -  total flux cleaned = 0.00810731 Jy
! Total flux subtracted in 200 components = 0.00810731 Jy
! Clean residual min=-0.001691 max=0.001687 Jy/beam
! Clean residual mean=0.000010 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.0493432 Jy
! Performing phase self-cal
! Adding 101 model components to the UV plane model.
! The established model now contains 136 components and 0.0493432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024638Jy  sigma=0.489584
! Fit after  self-cal, rms=0.024649Jy  sigma=0.488801
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.764 x 20 at -16.48 degrees (North through East)
! Clean map  min=-0.0040817  max=0.037925 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.88     HN        0.93     LA        1.15     NL        0.92     
!   OV        0.97     PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        0.94     LA        0.96     NL        1.12     
!   OV        1.10     PT        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.08     LA        0.91     NL        0.96     
!   OV        0.89     PT        0.90     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.03     LA        1.05     NL        1.12     
!   OV        1.00     PT        1.07     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     HN        0.90     LA        0.99     NL        1.05     
!   OV        0.89     PT        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.024649Jy  sigma=0.488801
! Fit after  self-cal, rms=0.023947Jy  sigma=0.479054
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.764 mas, bmaj=20.06 mas, bpa=-16.44 degrees
! Estimated noise=1.7767 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0004298 Jy
! Component: 100  -  total flux cleaned = -0.00028562 Jy
! Component: 150  -  total flux cleaned = -0.000345152 Jy
! Component: 200  -  total flux cleaned = -0.000286969 Jy
! Total flux subtracted in 200 components = -0.000286969 Jy
! Clean residual min=-0.000796 max=0.000799 Jy/beam
! Clean residual mean=-0.000000 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.0490562 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 200 components and 0.0490562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023521Jy  sigma=0.470309
! Fit after  self-cal, rms=0.023529Jy  sigma=0.469920
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023529Jy  sigma=0.469920
! Fit after  self-cal, rms=0.023737Jy  sigma=0.473466
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.764 mas, bmaj=20.03 mas, bpa=-16.48 degrees
! Estimated noise=1.77093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000172224 Jy
! Component: 100  -  total flux cleaned = -0.000261865 Jy
! Component: 150  -  total flux cleaned = -0.000146387 Jy
! Component: 200  -  total flux cleaned = -0.000148932 Jy
! Total flux subtracted in 200 components = -0.000148932 Jy
! Clean residual min=-0.000566 max=0.000562 Jy/beam
! Clean residual mean=0.000005 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.0489073 Jy
selfcal
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 253 components and 0.0489073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023572Jy  sigma=0.470503
! Fit after  self-cal, rms=0.023572Jy  sigma=0.470380
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.60984e-05 Jy
! Component: 100  -  total flux cleaned = 3.77578e-05 Jy
! Component: 150  -  total flux cleaned = 0.000218226 Jy
! Component: 200  -  total flux cleaned = 0.000417358 Jy
! Total flux subtracted in 200 components = 0.000417358 Jy
! Clean residual min=-0.000459 max=0.000460 Jy/beam
! Clean residual mean=0.000006 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.0493247 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 301 components and 0.0493247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023481Jy  sigma=0.468973
! Fit after  self-cal, rms=0.023478Jy  sigma=0.468937
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023478Jy  sigma=0.468937
! Fit after  self-cal, rms=0.023539Jy  sigma=0.468064
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.763 mas, bmaj=20.02 mas, bpa=-16.5 degrees
! Estimated noise=1.77408 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000150793 Jy
! Component: 100  -  total flux cleaned = -0.000212407 Jy
! Component: 150  -  total flux cleaned = -0.00015882 Jy
! Component: 200  -  total flux cleaned = -3.18997e-06 Jy
! Total flux subtracted in 200 components = -3.18997e-06 Jy
! Clean residual min=-0.000430 max=0.000426 Jy/beam
! Clean residual mean=0.000008 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.0493215 Jy
selfcal
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 369 components and 0.0493215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023458Jy  sigma=0.466684
! Fit after  self-cal, rms=0.023452Jy  sigma=0.466645
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.26487e-05 Jy
! Component: 100  -  total flux cleaned = 0.000283221 Jy
! Component: 150  -  total flux cleaned = 0.000522825 Jy
! Component: 200  -  total flux cleaned = 0.000732308 Jy
! Total flux subtracted in 200 components = 0.000732308 Jy
! Clean residual min=-0.000380 max=0.000381 Jy/beam
! Clean residual mean=0.000008 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.0500538 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 407 components and 0.0500538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023396Jy  sigma=0.465776
! Fit after  self-cal, rms=0.023393Jy  sigma=0.465755
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023393Jy  sigma=0.465755
! Fit after  self-cal, rms=0.023450Jy  sigma=0.465133
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.451 mas, bmaj=22.54 mas, bpa=-18.38 degrees
! Estimated noise=1.79061 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000106508 Jy
! Component: 100  -  total flux cleaned = 0.000171842 Jy
! Component: 150  -  total flux cleaned = 0.000349221 Jy
! Component: 200  -  total flux cleaned = 0.000415468 Jy
! Total flux subtracted in 200 components = 0.000415468 Jy
! Clean residual min=-0.000272 max=0.000275 Jy/beam
! Clean residual mean=0.000013 rms=0.000106 Jy/beam
! Combined flux in latest and established models = 0.0504693 Jy
selfcal
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 473 components and 0.0504693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023412Jy  sigma=0.464438
! Fit after  self-cal, rms=0.023416Jy  sigma=0.464405
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000129894 Jy
! Component: 100  -  total flux cleaned = -1.04755e-05 Jy
! Component: 150  -  total flux cleaned = -0.000308251 Jy
! Component: 200  -  total flux cleaned = -0.000578795 Jy
! Total flux subtracted in 200 components = -0.000578795 Jy
! Clean residual min=-0.000269 max=0.000266 Jy/beam
! Clean residual mean=0.000006 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.0498905 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 508 components and 0.0498905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023390Jy  sigma=0.463966
! Fit after  self-cal, rms=0.023390Jy  sigma=0.463955
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.762 mas, bmaj=20.02 mas, bpa=-16.52 degrees
! Estimated noise=1.77603 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.762 x 20.02 at -16.52 degrees (North through East)
! Clean map  min=-0.0028998  max=0.036743 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.421 mas, bmaj=18.96 mas, bpa=-15.98 degrees
! Estimated noise=2.29864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0332699 Jy
! Component: 100  -  total flux cleaned = 0.038641 Jy
! Component: 150  -  total flux cleaned = 0.040615 Jy
! Component: 200  -  total flux cleaned = 0.041422 Jy
! Total flux subtracted in 200 components = 0.041422 Jy
! Clean residual min=-0.002877 max=0.002861 Jy/beam
! Clean residual mean=-0.000017 rms=0.001199 Jy/beam
! Combined flux in latest and established models = 0.041422 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 72 model components to the UV plane model.
! The established model now contains 72 components and 0.041422 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.762 mas, bmaj=20.02 mas, bpa=-16.52 degrees
! Estimated noise=1.77603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00393826 Jy
! Component: 100  -  total flux cleaned = 0.00397117 Jy
! Component: 150  -  total flux cleaned = 0.00356952 Jy
! Component: 200  -  total flux cleaned = 0.00323812 Jy
! Total flux subtracted in 200 components = 0.00323812 Jy
! Clean residual min=-0.001263 max=0.001256 Jy/beam
! Clean residual mean=0.000005 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.0446602 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 144 components and 0.0446601 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.451 mas, bmaj=22.54 mas, bpa=-18.38 degrees
! Estimated noise=1.79061 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000172188 Jy
! Component: 100  -  total flux cleaned = -0.000787249 Jy
! Component: 150  -  total flux cleaned = -0.00121878 Jy
! Component: 200  -  total flux cleaned = -0.00155064 Jy
! Total flux subtracted in 200 components = -0.00155064 Jy
! Clean residual min=-0.000649 max=0.000652 Jy/beam
! Clean residual mean=0.000012 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.0431095 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000227632 Jy
! Component: 100  -  total flux cleaned = -0.000312291 Jy
! Component: 150  -  total flux cleaned = -0.000321429 Jy
! Component: 200  -  total flux cleaned = -0.000339401 Jy
! Total flux subtracted in 200 components = -0.000339401 Jy
! Clean residual min=-0.001285 max=0.001275 Jy/beam
! Clean residual mean=0.000005 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.0427701 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 220 components and 0.0427701 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.762 mas, bmaj=20.02 mas, bpa=-16.52 degrees
! Estimated noise=1.77603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000786438 Jy
! Component: 100  -  total flux cleaned = -0.00104299 Jy
! Component: 150  -  total flux cleaned = -0.00123651 Jy
! Component: 200  -  total flux cleaned = -0.00130825 Jy
! Total flux subtracted in 200 components = -0.00130825 Jy
! Clean residual min=-0.000573 max=0.000573 Jy/beam
! Clean residual mean=0.000009 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.0414619 Jy
selfcal
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 281 components and 0.0414619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023586Jy  sigma=0.466955
! Fit after  self-cal, rms=0.023583Jy  sigma=0.466758
wmodel /d2/scr/pima/bp177b_uvs/J1324-3623_X_map.mod
! Writing 281 model components to file: /d2/scr/pima/bp177b_uvs/J1324-3623_X_map.mod
wobs /d2/scr/pima/bp177b_uvs/J1324-3623_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177b_uvs/J1324-3623_X_uvs.fits
wwins /d2/scr/pima/bp177b_uvs/J1324-3623_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177b_uvs/J1324-3623_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.762 x 20.02 at -16.52 degrees (North through East)
! Clean map  min=-0.0030382  max=0.03505 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177b_uvs/J1324-3623_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0350497 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000205914 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.76248 1.76248 3.52495 7.04991 14.0998 28.1996 56.3993
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.035 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  170.215 
quit
! Quitting program
! Log file /d2/scr/pima/bp177b_uvs/J1324-3623_X_uvs.log closed on Sat Mar 22 08:10:01 2014