! Started logfile: /d2/scr/pima/bp177b_uvs/J1302+5748_X_uvs.log on Sat Mar 22 08:09:31 2014
obs /d2/scr/pima/bp177b_uvs/J1302+5748_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177b_uvs/J1302+5748_X_uva.fits
! AN table 1: 4 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.770833 visibilities/baseline/integration-bin.
! Found source: J1302+5748
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 888 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177b_uvs/J1302+5748_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.087426Jy  sigma=44.273769
! Fit after  self-cal, rms=0.566277Jy  sigma=23.216506
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6793 mas, bmaj=2.852 mas, bpa=16.81 degrees
! Estimated noise=0.831432 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.335215 Jy
! Component: 100  -  total flux cleaned = 0.408577 Jy
! Total flux subtracted in 100 components = 0.408577 Jy
! Clean residual min=-0.011906 max=0.022642 Jy/beam
! Clean residual mean=-0.000012 rms=0.003473 Jy/beam
! Combined flux in latest and established models = 0.408577 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.408577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.062979Jy  sigma=2.407027
! Fit after  self-cal, rms=0.062982Jy  sigma=2.406778
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0236646 Jy
! Component: 100  -  total flux cleaned = 0.0353664 Jy
! Total flux subtracted in 100 components = 0.0353664 Jy
! Clean residual min=-0.010592 max=0.010934 Jy/beam
! Clean residual mean=-0.000009 rms=0.002497 Jy/beam
! Combined flux in latest and established models = 0.443943 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.443943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052816Jy  sigma=1.964975
! Fit after  self-cal, rms=0.052804Jy  sigma=1.964090
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8179 mas, bmaj=2.772 mas, bpa=16.53 degrees
! Estimated noise=0.604403 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00848577 Jy
! Component: 100  -  total flux cleaned = 0.0142746 Jy
! Component: 150  -  total flux cleaned = 0.0187567 Jy
! Component: 200  -  total flux cleaned = 0.022302 Jy
! Total flux subtracted in 200 components = 0.022302 Jy
! Clean residual min=-0.011852 max=0.010299 Jy/beam
! Clean residual mean=-0.000027 rms=0.002520 Jy/beam
! Combined flux in latest and established models = 0.466245 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 39 components and 0.466245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051329Jy  sigma=1.879136
! Fit after  self-cal, rms=0.051329Jy  sigma=1.878495
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8179 x 2.772 at 16.53 degrees (North through East)
! Clean map  min=-0.010974  max=0.43489 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.13     HN        0.91     LA        1.04     
!   MK        1.00     NL        1.03     OV        0.98     PT        0.87     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        0.90     LA        0.97     
!   MK        1.00     NL        1.02     OV        0.93     PT        0.89     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.10     HN        1.03     LA        0.98     
!   MK        1.09     NL        1.00     OV        0.98     PT        0.93     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     LA        1.00     
!   MK        0.97     NL        0.94     OV        0.95     PT        0.89     
!   SC        0.96     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        1.08     LA        1.07     
!   MK        1.03     NL        1.02     OV        1.02     PT        0.94     
!   SC        1.03     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.00     LA        0.98     
!   MK        1.01     NL        1.00     OV        1.04     PT        0.90     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.03     HN        1.01     LA        0.93     
!   MK        0.99     NL        1.01     OV        1.04     PT        0.86     
!   SC        1.11     
! 
! 
! Fit before self-cal, rms=0.051329Jy  sigma=1.878495
! Fit after  self-cal, rms=0.036752Jy  sigma=1.187239
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8436 mas, bmaj=2.797 mas, bpa=16.36 degrees
! Estimated noise=0.605808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00308044 Jy
! Component: 100  -  total flux cleaned = -0.00450869 Jy
! Component: 150  -  total flux cleaned = -0.0055107 Jy
! Component: 200  -  total flux cleaned = -0.00595711 Jy
! Total flux subtracted in 200 components = -0.00595711 Jy
! Clean residual min=-0.003619 max=0.004175 Jy/beam
! Clean residual mean=-0.000004 rms=0.000907 Jy/beam
! Combined flux in latest and established models = 0.460288 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 53 components and 0.460288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036254Jy  sigma=1.176713
! Fit after  self-cal, rms=0.036250Jy  sigma=1.176555
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036250Jy  sigma=1.176555
! Fit after  self-cal, rms=0.031671Jy  sigma=0.920467
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8456 mas, bmaj=2.796 mas, bpa=16.34 degrees
! Estimated noise=0.601749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00262237 Jy
! Component: 100  -  total flux cleaned = -0.00391227 Jy
! Component: 150  -  total flux cleaned = -0.00458451 Jy
! Component: 200  -  total flux cleaned = -0.00480472 Jy
! Total flux subtracted in 200 components = -0.00480472 Jy
! Clean residual min=-0.002700 max=0.003440 Jy/beam
! Clean residual mean=0.000000 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.455483 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 63 components and 0.455483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031150Jy  sigma=0.921475
! Fit after  self-cal, rms=0.031153Jy  sigma=0.921393
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025389 Jy
! Component: 100  -  total flux cleaned = 0.00301885 Jy
! Component: 150  -  total flux cleaned = 0.00325655 Jy
! Component: 200  -  total flux cleaned = 0.00336678 Jy
! Total flux subtracted in 200 components = 0.00336678 Jy
! Clean residual min=-0.002213 max=0.002159 Jy/beam
! Clean residual mean=0.000002 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.45885 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 84 components and 0.45885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030726Jy  sigma=0.910252
! Fit after  self-cal, rms=0.030717Jy  sigma=0.909981
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030717Jy  sigma=0.909981
! Fit after  self-cal, rms=0.031014Jy  sigma=0.899266
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8473 mas, bmaj=2.797 mas, bpa=16.31 degrees
! Estimated noise=0.598324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00185256 Jy
! Component: 100  -  total flux cleaned = -0.00218468 Jy
! Component: 150  -  total flux cleaned = -0.00241564 Jy
! Component: 200  -  total flux cleaned = -0.00250894 Jy
! Total flux subtracted in 200 components = -0.00250894 Jy
! Clean residual min=-0.002015 max=0.002161 Jy/beam
! Clean residual mean=0.000005 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.456341 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 97 components and 0.456341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030541Jy  sigma=0.901997
! Fit after  self-cal, rms=0.030541Jy  sigma=0.901852
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000335791 Jy
! Component: 100  -  total flux cleaned = -0.000561636 Jy
! Component: 150  -  total flux cleaned = -0.00080394 Jy
! Component: 200  -  total flux cleaned = -0.00106068 Jy
! Total flux subtracted in 200 components = -0.00106068 Jy
! Clean residual min=-0.001904 max=0.002043 Jy/beam
! Clean residual mean=0.000004 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.45528 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 111 components and 0.45528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030449Jy  sigma=0.902538
! Fit after  self-cal, rms=0.030451Jy  sigma=0.902440
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030451Jy  sigma=0.902440
! Fit after  self-cal, rms=0.030732Jy  sigma=0.896114
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.831 mas, bmaj=2.924 mas, bpa=15.77 degrees
! Estimated noise=0.768941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00290476 Jy
! Component: 100  -  total flux cleaned = -0.00410014 Jy
! Component: 150  -  total flux cleaned = -0.00464794 Jy
! Component: 200  -  total flux cleaned = -0.004999 Jy
! Total flux subtracted in 200 components = -0.004999 Jy
! Clean residual min=-0.002438 max=0.003513 Jy/beam
! Clean residual mean=0.000012 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.450281 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 127 components and 0.450281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030269Jy  sigma=0.902589
! Fit after  self-cal, rms=0.030269Jy  sigma=0.902329
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000114777 Jy
! Component: 100  -  total flux cleaned = -0.000350786 Jy
! Component: 150  -  total flux cleaned = -0.000580534 Jy
! Component: 200  -  total flux cleaned = -0.00078946 Jy
! Total flux subtracted in 200 components = -0.00078946 Jy
! Clean residual min=-0.002412 max=0.003380 Jy/beam
! Clean residual mean=0.000010 rms=0.000863 Jy/beam
! Combined flux in latest and established models = 0.449492 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 135 components and 0.449492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030205Jy  sigma=0.904066
! Fit after  self-cal, rms=0.030205Jy  sigma=0.903942
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8485 mas, bmaj=2.797 mas, bpa=16.29 degrees
! Estimated noise=0.595615 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8485 x 2.797 at 16.29 degrees (North through East)
! Clean map  min=-0.0022784  max=0.42863 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7003 mas, bmaj=2.848 mas, bpa=16.41 degrees
! Estimated noise=0.808947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.331811 Jy
! Component: 100  -  total flux cleaned = 0.404357 Jy
! Component: 150  -  total flux cleaned = 0.423299 Jy
! Component: 200  -  total flux cleaned = 0.432477 Jy
! Total flux subtracted in 200 components = 0.432477 Jy
! Clean residual min=-0.004050 max=0.004317 Jy/beam
! Clean residual mean=-0.000001 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.432477 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.432477 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8485 mas, bmaj=2.797 mas, bpa=16.29 degrees
! Estimated noise=0.595615 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00558003 Jy
! Component: 100  -  total flux cleaned = 0.0090073 Jy
! Component: 150  -  total flux cleaned = 0.0115775 Jy
! Component: 200  -  total flux cleaned = 0.0131819 Jy
! Total flux subtracted in 200 components = 0.0131819 Jy
! Clean residual min=-0.002367 max=0.002889 Jy/beam
! Clean residual mean=0.000002 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.445659 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 35 components and 0.445659 Jy
! Inverting map 
! Added new window around map position (-18.6, -9.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00251136 Jy
! Component: 100  -  total flux cleaned = 0.00372769 Jy
! Component: 150  -  total flux cleaned = 0.00443679 Jy
! Component: 200  -  total flux cleaned = 0.0050749 Jy
! Total flux subtracted in 200 components = 0.0050749 Jy
! Clean residual min=-0.001901 max=0.002267 Jy/beam
! Clean residual mean=0.000001 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.450734 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 64 components and 0.450734 Jy
! Inverting map 
! Added new window around map position (18.8, 10.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147225 Jy
! Component: 100  -  total flux cleaned = 0.00254432 Jy
! Component: 150  -  total flux cleaned = 0.00330877 Jy
! Component: 200  -  total flux cleaned = 0.00395346 Jy
! Total flux subtracted in 200 components = 0.00395346 Jy
! Clean residual min=-0.001657 max=0.001409 Jy/beam
! Clean residual mean=0.000001 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.454687 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 90 components and 0.454687 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.831 mas, bmaj=2.924 mas, bpa=15.77 degrees
! Estimated noise=0.768941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147551 Jy
! Component: 100  -  total flux cleaned = 0.0023926 Jy
! Component: 150  -  total flux cleaned = 0.00306869 Jy
! Component: 200  -  total flux cleaned = 0.00350626 Jy
! Total flux subtracted in 200 components = 0.00350626 Jy
! Clean residual min=-0.001434 max=0.001409 Jy/beam
! Clean residual mean=0.000001 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.458194 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000354516 Jy
! Component: 100  -  total flux cleaned = 0.000741534 Jy
! Component: 150  -  total flux cleaned = 0.00113987 Jy
! Component: 200  -  total flux cleaned = 0.00151007 Jy
! Total flux subtracted in 200 components = 0.00151007 Jy
! Clean residual min=-0.001360 max=0.001278 Jy/beam
! Clean residual mean=0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.459704 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 142 components and 0.459704 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8485 mas, bmaj=2.797 mas, bpa=16.29 degrees
! Estimated noise=0.595615 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000443876 Jy
! Component: 100  -  total flux cleaned = 0.000820987 Jy
! Component: 150  -  total flux cleaned = 0.00113773 Jy
! Component: 200  -  total flux cleaned = 0.00140804 Jy
! Total flux subtracted in 200 components = 0.00140804 Jy
! Clean residual min=-0.001380 max=0.001244 Jy/beam
! Clean residual mean=0.000000 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.461112 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 163 components and 0.461112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029496Jy  sigma=0.909132
! Fit after  self-cal, rms=0.029492Jy  sigma=0.908721
wmodel /d2/scr/pima/bp177b_uvs/J1302+5748_X_map.mod
! Writing 163 model components to file: /d2/scr/pima/bp177b_uvs/J1302+5748_X_map.mod
wobs /d2/scr/pima/bp177b_uvs/J1302+5748_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177b_uvs/J1302+5748_X_uvs.fits
wwins /d2/scr/pima/bp177b_uvs/J1302+5748_X_map.win
! wwins: Wrote 4 windows to /d2/scr/pima/bp177b_uvs/J1302+5748_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000351431 Jy
! Component: 100  -  total flux cleaned = -0.000431306 Jy
! Component: 150  -  total flux cleaned = -0.000544937 Jy
! Component: 200  -  total flux cleaned = -0.000651905 Jy
! Component: 250  -  total flux cleaned = -0.000668168 Jy
! Component: 300  -  total flux cleaned = -0.000652072 Jy
! Component: 350  -  total flux cleaned = -0.000637014 Jy
! Component: 400  -  total flux cleaned = -0.00065273 Jy
! Component: 450  -  total flux cleaned = -0.000682425 Jy
! Component: 500  -  total flux cleaned = -0.000653767 Jy
! Component: 550  -  total flux cleaned = -0.000751819 Jy
! Component: 600  -  total flux cleaned = -0.00071061 Jy
! Component: 650  -  total flux cleaned = -0.000724394 Jy
! Component: 700  -  total flux cleaned = -0.000697952 Jy
! Component: 750  -  total flux cleaned = -0.000723786 Jy
! Component: 800  -  total flux cleaned = -0.000698307 Jy
! Component: 850  -  total flux cleaned = -0.000723144 Jy
! Component: 900  -  total flux cleaned = -0.000722998 Jy
! Component: 950  -  total flux cleaned = -0.000746731 Jy
! Component: 1000  -  total flux cleaned = -0.000699911 Jy
! Component: 1050  -  total flux cleaned = -0.000688607 Jy
! Component: 1100  -  total flux cleaned = -0.000700048 Jy
! Component: 1150  -  total flux cleaned = -0.000655207 Jy
! Component: 1200  -  total flux cleaned = -0.000644165 Jy
! Component: 1250  -  total flux cleaned = -0.000665854 Jy
! Component: 1300  -  total flux cleaned = -0.000601605 Jy
! Component: 1350  -  total flux cleaned = -0.000591233 Jy
! Component: 1400  -  total flux cleaned = -0.000591266 Jy
! Component: 1450  -  total flux cleaned = -0.00052963 Jy
! Component: 1500  -  total flux cleaned = -0.000478911 Jy
! Component: 1550  -  total flux cleaned = -0.000428779 Jy
! Component: 1600  -  total flux cleaned = -0.000369473 Jy
! Component: 1650  -  total flux cleaned = -0.00034026 Jy
! Component: 1700  -  total flux cleaned = -0.000311373 Jy
! Component: 1750  -  total flux cleaned = -0.000301707 Jy
! Component: 1800  -  total flux cleaned = -0.000273455 Jy
! Component: 1850  -  total flux cleaned = -0.000264044 Jy
! Component: 1900  -  total flux cleaned = -0.000273257 Jy
! Component: 1950  -  total flux cleaned = -0.000273135 Jy
! Component: 2000  -  total flux cleaned = -0.000227609 Jy
! Component: 2050  -  total flux cleaned = -0.000218689 Jy
! Component: 2100  -  total flux cleaned = -0.00021876 Jy
! Component: 2150  -  total flux cleaned = -0.000201085 Jy
! Component: 2200  -  total flux cleaned = -0.000192295 Jy
! Component: 2250  -  total flux cleaned = -0.000148728 Jy
! Component: 2300  -  total flux cleaned = -0.000122877 Jy
! Component: 2350  -  total flux cleaned = -7.99785e-05 Jy
! Component: 2400  -  total flux cleaned = -6.29152e-05 Jy
! Component: 2450  -  total flux cleaned = -5.44376e-05 Jy
! Component: 2500  -  total flux cleaned = -2.07605e-05 Jy
! Component: 2550  -  total flux cleaned = 1.26901e-05 Jy
! Component: 2600  -  total flux cleaned = 2.93099e-05 Jy
! Component: 2650  -  total flux cleaned = 5.40652e-05 Jy
! Component: 2700  -  total flux cleaned = 9.49676e-05 Jy
! Component: 2750  -  total flux cleaned = 0.00010315 Jy
! Component: 2800  -  total flux cleaned = 0.000135553 Jy
! Component: 2850  -  total flux cleaned = 0.000135467 Jy
! Component: 2900  -  total flux cleaned = 0.000151391 Jy
! Component: 2950  -  total flux cleaned = 0.000151383 Jy
! Component: 3000  -  total flux cleaned = 0.000183101 Jy
! Component: 3050  -  total flux cleaned = 0.000191046 Jy
! Component: 3100  -  total flux cleaned = 0.000214612 Jy
! Component: 3150  -  total flux cleaned = 0.000238076 Jy
! Component: 3200  -  total flux cleaned = 0.000238081 Jy
! Component: 3250  -  total flux cleaned = 0.000253593 Jy
! Component: 3300  -  total flux cleaned = 0.000253577 Jy
! Component: 3350  -  total flux cleaned = 0.000284284 Jy
! Component: 3400  -  total flux cleaned = 0.000253627 Jy
! Component: 3450  -  total flux cleaned = 0.000246046 Jy
! Component: 3500  -  total flux cleaned = 0.000276513 Jy
! Component: 3550  -  total flux cleaned = 0.000253689 Jy
! Component: 3600  -  total flux cleaned = 0.000261286 Jy
! Component: 3650  -  total flux cleaned = 0.000253755 Jy
! Component: 3700  -  total flux cleaned = 0.000261294 Jy
! Component: 3750  -  total flux cleaned = 0.00027633 Jy
! Component: 3800  -  total flux cleaned = 0.000268829 Jy
! Component: 3850  -  total flux cleaned = 0.000283802 Jy
! Component: 3900  -  total flux cleaned = 0.000276315 Jy
! Component: 3950  -  total flux cleaned = 0.000291219 Jy
! Component: 4000  -  total flux cleaned = 0.000298691 Jy
! Component: 4050  -  total flux cleaned = 0.000321015 Jy
! Total flux subtracted in 4096 components = 0.000298732 Jy
! Clean residual min=-0.000588 max=0.000453 Jy/beam
! Clean residual mean=0.000000 rms=0.000129 Jy/beam
! Combined flux in latest and established models = 0.46141 Jy
keep
! Adding 261 model components to the UV plane model.
! The established model now contains 424 components and 0.46141 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177b_uvs/J1302+5748_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8485 x 2.797 at 16.29 degrees (North through East)
! Clean map  min=-0.0010986  max=0.42785 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177b_uvs/J1302+5748_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.427847 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00012467 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0874167 0.0874167 0.174833 0.349667 0.699333 1.39867 2.79733 5.59467 11.1893 22.3787 44.7573 89.5147
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.427 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3431.84 
quit
! Quitting program
! Log file /d2/scr/pima/bp177b_uvs/J1302+5748_X_uvs.log closed on Sat Mar 22 08:09:35 2014