! Started logfile: /d2/scr/pima/bp177b_uvs/J1007+3444_X_uvs.log on Sat Mar 22 08:08:01 2014
obs /d2/scr/pima/bp177b_uvs/J1007+3444_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177b_uvs/J1007+3444_X_uva.fits
! AN table 1: 5 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.733333 visibilities/baseline/integration-bin.
! Found source: J1007+3444
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1056 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177b_uvs/J1007+3444_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001402Jy  sigma=41.170723
! Fit after  self-cal, rms=0.953477Jy  sigma=39.286693
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6947 mas, bmaj=2.297 mas, bpa=-9.306 degrees
! Estimated noise=0.76057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.035315 Jy
! Component: 100  -  total flux cleaned = 0.0445432 Jy
! Total flux subtracted in 100 components = 0.0445432 Jy
! Clean residual min=-0.002853 max=0.005391 Jy/beam
! Clean residual mean=-0.000004 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.0445432 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0445432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020572Jy  sigma=0.742086
! Fit after  self-cal, rms=0.018968Jy  sigma=0.672083
! Inverting map 
! Added new window around map position (-2.2, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00550629 Jy
! Component: 100  -  total flux cleaned = 0.00865108 Jy
! Total flux subtracted in 100 components = 0.00865108 Jy
! Clean residual min=-0.002480 max=0.002191 Jy/beam
! Clean residual mean=-0.000002 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.0531943 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 16 components and 0.0531943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017402Jy  sigma=0.594248
! Fit after  self-cal, rms=0.017298Jy  sigma=0.591753
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7982 mas, bmaj=2.37 mas, bpa=-8.729 degrees
! Estimated noise=0.549363 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00252942 Jy
! Component: 100  -  total flux cleaned = 0.00422224 Jy
! Component: 150  -  total flux cleaned = 0.00540596 Jy
! Component: 200  -  total flux cleaned = 0.00626702 Jy
! Total flux subtracted in 200 components = 0.00626702 Jy
! Clean residual min=-0.001697 max=0.001499 Jy/beam
! Clean residual mean=-0.000001 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.0594613 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 42 components and 0.0594613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016841Jy  sigma=0.569727
! Fit after  self-cal, rms=0.016806Jy  sigma=0.568754
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7982 x 2.37 at -8.729 degrees (North through East)
! Clean map  min=-0.0015023  max=0.046394 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.09     HN        0.88     LA        1.03     
!   MK        0.95     NL        1.08     OV        0.93     PT        0.90     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.97     HN        1.03     LA        0.95     
!   MK        1.06     NL        1.02     OV        0.97     PT        0.92     
!   SC        0.92     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.10     HN        1.03     LA        0.98     
!   MK        0.97     NL        1.02     OV        1.02     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        1.00     LA        0.97     
!   MK        1.01     NL        0.93     OV        0.97     PT        0.89     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        1.16     LA        1.05     
!   MK        0.92     NL        0.96     OV        1.01     PT        0.95     
!   SC        1.06     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.95     LA        0.95     
!   MK        1.10     NL        0.96     OV        1.01     PT        0.89     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.03     HN        1.05     LA        0.91     
!   MK        0.99     NL        1.02     OV        0.97     PT        0.85     
!   SC        1.14     
! 
! 
! Fit before self-cal, rms=0.016806Jy  sigma=0.568754
! Fit after  self-cal, rms=0.014939Jy  sigma=0.541362
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8176 mas, bmaj=2.397 mas, bpa=-9.02 degrees
! Estimated noise=0.544691 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156089 Jy
! Component: 100  -  total flux cleaned = 0.000155648 Jy
! Component: 150  -  total flux cleaned = 0.000156055 Jy
! Component: 200  -  total flux cleaned = 0.000143216 Jy
! Total flux subtracted in 200 components = 0.000143216 Jy
! Clean residual min=-0.001046 max=0.001149 Jy/beam
! Clean residual mean=-0.000000 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.0596045 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 54 components and 0.0596045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014910Jy  sigma=0.539711
! Fit after  self-cal, rms=0.014906Jy  sigma=0.539486
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014906Jy  sigma=0.539486
! Fit after  self-cal, rms=0.014766Jy  sigma=0.530504
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8184 mas, bmaj=2.397 mas, bpa=-8.931 degrees
! Estimated noise=0.543726 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.65086e-05 Jy
! Component: 100  -  total flux cleaned = -5.96164e-05 Jy
! Component: 150  -  total flux cleaned = -7.89409e-05 Jy
! Component: 200  -  total flux cleaned = -0.00010332 Jy
! Total flux subtracted in 200 components = -0.00010332 Jy
! Clean residual min=-0.001056 max=0.001048 Jy/beam
! Clean residual mean=0.000000 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.0595012 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 64 components and 0.0595012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014749Jy  sigma=0.529879
! Fit after  self-cal, rms=0.014748Jy  sigma=0.529804
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.17003e-05 Jy
! Component: 100  -  total flux cleaned = 1.38633e-05 Jy
! Component: 150  -  total flux cleaned = -5.73195e-06 Jy
! Component: 200  -  total flux cleaned = 5.21427e-07 Jy
! Total flux subtracted in 200 components = 5.21427e-07 Jy
! Clean residual min=-0.001043 max=0.001018 Jy/beam
! Clean residual mean=0.000000 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.0595017 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 69 components and 0.0595017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014742Jy  sigma=0.529495
! Fit after  self-cal, rms=0.014741Jy  sigma=0.529478
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014741Jy  sigma=0.529478
! Fit after  self-cal, rms=0.014712Jy  sigma=0.529395
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8181 mas, bmaj=2.397 mas, bpa=-8.903 degrees
! Estimated noise=0.542227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.42515e-05 Jy
! Component: 100  -  total flux cleaned = -0.000118437 Jy
! Component: 150  -  total flux cleaned = -0.000118835 Jy
! Component: 200  -  total flux cleaned = -0.00011357 Jy
! Total flux subtracted in 200 components = -0.00011357 Jy
! Clean residual min=-0.001029 max=0.000993 Jy/beam
! Clean residual mean=0.000000 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.0593882 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 75 components and 0.0593882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014706Jy  sigma=0.529172
! Fit after  self-cal, rms=0.014705Jy  sigma=0.529164
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.12805e-05 Jy
! Component: 100  -  total flux cleaned = 2.60394e-05 Jy
! Component: 150  -  total flux cleaned = 3.5448e-05 Jy
! Component: 200  -  total flux cleaned = 4.46825e-05 Jy
! Total flux subtracted in 200 components = 4.46825e-05 Jy
! Clean residual min=-0.001030 max=0.000987 Jy/beam
! Clean residual mean=0.000000 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.0594329 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 80 components and 0.0594329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014703Jy  sigma=0.529021
! Fit after  self-cal, rms=0.014702Jy  sigma=0.529016
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014702Jy  sigma=0.529016
! Fit after  self-cal, rms=0.014662Jy  sigma=0.528960
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.909 mas, bmaj=2.792 mas, bpa=-7.405 degrees
! Estimated noise=0.708299 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00015707 Jy
! Component: 100  -  total flux cleaned = -0.000155047 Jy
! Component: 150  -  total flux cleaned = -0.000167445 Jy
! Component: 200  -  total flux cleaned = -0.000178171 Jy
! Total flux subtracted in 200 components = -0.000178171 Jy
! Clean residual min=-0.000926 max=0.000983 Jy/beam
! Clean residual mean=-0.000000 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0592547 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 84 components and 0.0592547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014662Jy  sigma=0.529073
! Fit after  self-cal, rms=0.014660Jy  sigma=0.528999
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.63689e-05 Jy
! Component: 100  -  total flux cleaned = 4.76328e-05 Jy
! Component: 150  -  total flux cleaned = 4.76139e-05 Jy
! Component: 200  -  total flux cleaned = 4.06392e-05 Jy
! Total flux subtracted in 200 components = 4.06392e-05 Jy
! Clean residual min=-0.000907 max=0.000985 Jy/beam
! Clean residual mean=0.000000 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.0592953 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 91 components and 0.0592953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014664Jy  sigma=0.529141
! Fit after  self-cal, rms=0.014664Jy  sigma=0.529115
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8179 mas, bmaj=2.397 mas, bpa=-8.894 degrees
! Estimated noise=0.540482 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8179 x 2.397 at -8.894 degrees (North through East)
! Clean map  min=-0.00092356  max=0.045649 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7012 mas, bmaj=2.287 mas, bpa=-9.873 degrees
! Estimated noise=0.751036 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0353275 Jy
! Component: 100  -  total flux cleaned = 0.0451193 Jy
! Component: 150  -  total flux cleaned = 0.0503134 Jy
! Component: 200  -  total flux cleaned = 0.0533449 Jy
! Total flux subtracted in 200 components = 0.0533449 Jy
! Clean residual min=-0.001855 max=0.001979 Jy/beam
! Clean residual mean=-0.000001 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.0533449 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0533449 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8179 mas, bmaj=2.397 mas, bpa=-8.894 degrees
! Estimated noise=0.540482 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219071 Jy
! Component: 100  -  total flux cleaned = 0.00363948 Jy
! Component: 150  -  total flux cleaned = 0.00445251 Jy
! Component: 200  -  total flux cleaned = 0.00487239 Jy
! Total flux subtracted in 200 components = 0.00487239 Jy
! Clean residual min=-0.001106 max=0.001040 Jy/beam
! Clean residual mean=-0.000000 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.0582173 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 35 components and 0.0582173 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.909 mas, bmaj=2.792 mas, bpa=-7.405 degrees
! Estimated noise=0.708299 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229025 Jy
! Component: 100  -  total flux cleaned = 0.000338948 Jy
! Component: 150  -  total flux cleaned = 0.000337803 Jy
! Component: 200  -  total flux cleaned = 0.000337129 Jy
! Total flux subtracted in 200 components = 0.000337129 Jy
! Clean residual min=-0.000954 max=0.000908 Jy/beam
! Clean residual mean=-0.000000 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.0585544 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.50351e-07 Jy
! Component: 100  -  total flux cleaned = -6.81245e-07 Jy
! Component: 150  -  total flux cleaned = -2.60195e-07 Jy
! Component: 200  -  total flux cleaned = 6.46246e-06 Jy
! Total flux subtracted in 200 components = 6.46246e-06 Jy
! Clean residual min=-0.000978 max=0.000890 Jy/beam
! Clean residual mean=-0.000000 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.0585608 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 59 components and 0.0585608 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8179 mas, bmaj=2.397 mas, bpa=-8.894 degrees
! Estimated noise=0.540482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000170995 Jy
! Component: 100  -  total flux cleaned = 0.000186674 Jy
! Component: 150  -  total flux cleaned = 0.00020101 Jy
! Component: 200  -  total flux cleaned = 0.000200807 Jy
! Total flux subtracted in 200 components = 0.000200807 Jy
! Clean residual min=-0.001094 max=0.000987 Jy/beam
! Clean residual mean=-0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.0587617 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 70 components and 0.0587617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014669Jy  sigma=0.529281
! Fit after  self-cal, rms=0.014670Jy  sigma=0.529152
wmodel /d2/scr/pima/bp177b_uvs/J1007+3444_X_map.mod
! Writing 70 model components to file: /d2/scr/pima/bp177b_uvs/J1007+3444_X_map.mod
wobs /d2/scr/pima/bp177b_uvs/J1007+3444_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177b_uvs/J1007+3444_X_uvs.fits
wwins /d2/scr/pima/bp177b_uvs/J1007+3444_X_map.win
! wwins: Wrote 3 windows to /d2/scr/pima/bp177b_uvs/J1007+3444_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.63167e-05 Jy
! Component: 100  -  total flux cleaned = -0.000116157 Jy
! Component: 150  -  total flux cleaned = -0.000198843 Jy
! Component: 200  -  total flux cleaned = -0.000277362 Jy
! Component: 250  -  total flux cleaned = -0.000336811 Jy
! Component: 300  -  total flux cleaned = -0.00037964 Jy
! Component: 350  -  total flux cleaned = -0.000449321 Jy
! Component: 400  -  total flux cleaned = -0.000476033 Jy
! Component: 450  -  total flux cleaned = -0.000501416 Jy
! Component: 500  -  total flux cleaned = -0.000488458 Jy
! Component: 550  -  total flux cleaned = -0.000500352 Jy
! Component: 600  -  total flux cleaned = -0.000476298 Jy
! Component: 650  -  total flux cleaned = -0.000488071 Jy
! Component: 700  -  total flux cleaned = -0.000488016 Jy
! Component: 750  -  total flux cleaned = -0.000487936 Jy
! Component: 800  -  total flux cleaned = -0.000498839 Jy
! Component: 850  -  total flux cleaned = -0.000477361 Jy
! Component: 900  -  total flux cleaned = -0.000467211 Jy
! Component: 950  -  total flux cleaned = -0.000477614 Jy
! Component: 1000  -  total flux cleaned = -0.000467487 Jy
! Component: 1050  -  total flux cleaned = -0.00044782 Jy
! Component: 1100  -  total flux cleaned = -0.000457401 Jy
! Component: 1150  -  total flux cleaned = -0.000438566 Jy
! Component: 1200  -  total flux cleaned = -0.000429353 Jy
! Component: 1250  -  total flux cleaned = -0.000420251 Jy
! Component: 1300  -  total flux cleaned = -0.000393265 Jy
! Component: 1350  -  total flux cleaned = -0.000366817 Jy
! Component: 1400  -  total flux cleaned = -0.000323551 Jy
! Component: 1450  -  total flux cleaned = -0.000323914 Jy
! Component: 1500  -  total flux cleaned = -0.000340645 Jy
! Component: 1550  -  total flux cleaned = -0.000307439 Jy
! Component: 1600  -  total flux cleaned = -0.000307472 Jy
! Component: 1650  -  total flux cleaned = -0.000299438 Jy
! Component: 1700  -  total flux cleaned = -0.000275509 Jy
! Component: 1750  -  total flux cleaned = -0.000251984 Jy
! Component: 1800  -  total flux cleaned = -0.000236507 Jy
! Component: 1850  -  total flux cleaned = -0.000221068 Jy
! Component: 1900  -  total flux cleaned = -0.000190934 Jy
! Component: 1950  -  total flux cleaned = -0.000183655 Jy
! Component: 2000  -  total flux cleaned = -0.000169054 Jy
! Component: 2050  -  total flux cleaned = -0.000140208 Jy
! Component: 2100  -  total flux cleaned = -0.000126033 Jy
! Component: 2150  -  total flux cleaned = -0.00012596 Jy
! Component: 2200  -  total flux cleaned = -8.39534e-05 Jy
! Component: 2250  -  total flux cleaned = -6.31908e-05 Jy
! Component: 2300  -  total flux cleaned = -2.21437e-05 Jy
! Component: 2350  -  total flux cleaned = -1.79921e-06 Jy
! Component: 2400  -  total flux cleaned = 1.17187e-05 Jy
! Component: 2450  -  total flux cleaned = 5.17494e-05 Jy
! Component: 2500  -  total flux cleaned = 9.12985e-05 Jy
! Component: 2550  -  total flux cleaned = 0.000110858 Jy
! Component: 2600  -  total flux cleaned = 0.000149576 Jy
! Component: 2650  -  total flux cleaned = 0.000162396 Jy
! Component: 2700  -  total flux cleaned = 0.000200533 Jy
! Component: 2750  -  total flux cleaned = 0.000225697 Jy
! Component: 2800  -  total flux cleaned = 0.000232039 Jy
! Component: 2850  -  total flux cleaned = 0.000293978 Jy
! Component: 2900  -  total flux cleaned = 0.000306234 Jy
! Component: 2950  -  total flux cleaned = 0.000318356 Jy
! Component: 3000  -  total flux cleaned = 0.000342531 Jy
! Component: 3050  -  total flux cleaned = 0.000378597 Jy
! Component: 3100  -  total flux cleaned = 0.000396513 Jy
! Component: 3150  -  total flux cleaned = 0.000437923 Jy
! Component: 3200  -  total flux cleaned = 0.000449735 Jy
! Component: 3250  -  total flux cleaned = 0.000484812 Jy
! Component: 3300  -  total flux cleaned = 0.000513861 Jy
! Component: 3350  -  total flux cleaned = 0.00054266 Jy
! Component: 3400  -  total flux cleaned = 0.000576992 Jy
! Component: 3450  -  total flux cleaned = 0.000582644 Jy
! Component: 3500  -  total flux cleaned = 0.0006222 Jy
! Component: 3550  -  total flux cleaned = 0.000633426 Jy
! Component: 3600  -  total flux cleaned = 0.00065017 Jy
! Component: 3650  -  total flux cleaned = 0.000700073 Jy
! Component: 3700  -  total flux cleaned = 0.000694539 Jy
! Component: 3750  -  total flux cleaned = 0.000721965 Jy
! Component: 3800  -  total flux cleaned = 0.000732835 Jy
! Component: 3850  -  total flux cleaned = 0.000732861 Jy
! Component: 3900  -  total flux cleaned = 0.000759828 Jy
! Component: 3950  -  total flux cleaned = 0.000781279 Jy
! Component: 4000  -  total flux cleaned = 0.000786652 Jy
! Component: 4050  -  total flux cleaned = 0.00077608 Jy
! Total flux subtracted in 4096 components = 0.000802521 Jy
! Clean residual min=-0.000335 max=0.000288 Jy/beam
! Clean residual mean=0.000000 rms=0.000089 Jy/beam
! Combined flux in latest and established models = 0.0595642 Jy
keep
! Adding 261 model components to the UV plane model.
! The established model now contains 331 components and 0.0595642 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177b_uvs/J1007+3444_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8179 x 2.397 at -8.894 degrees (North through East)
! Clean map  min=-0.00061727  max=0.045727 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177b_uvs/J1007+3444_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0457272 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.87507e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.582262 0.582262 1.16452 2.32905 4.65809 9.31619 18.6324 37.2648 74.5295
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.045 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  515.232 
quit
! Quitting program
! Log file /d2/scr/pima/bp177b_uvs/J1007+3444_X_uvs.log closed on Sat Mar 22 08:08:05 2014