! Started logfile: /d2/scr/pima/bp177b_uvs/J1007+3444_C_uvs.log on Sat Mar 22 08:08:23 2014
obs /d2/scr/pima/bp177b_uvs/J1007+3444_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177b_uvs/J1007+3444_C_uva.fits
! AN table 1: 5 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.733333 visibilities/baseline/integration-bin.
! Found source: J1007+3444
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1056 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177b_uvs/J1007+3444_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001916Jy  sigma=48.461854
! Fit after  self-cal, rms=0.959033Jy  sigma=46.348812
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.22 mas, bmaj=3.895 mas, bpa=-7.559 degrees
! Estimated noise=0.605096 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0314641 Jy
! Component: 100  -  total flux cleaned = 0.0390273 Jy
! Total flux subtracted in 100 components = 0.0390273 Jy
! Clean residual min=-0.002563 max=0.007863 Jy/beam
! Clean residual mean=-0.000002 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.0390273 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0390273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020903Jy  sigma=0.861892
! Fit after  self-cal, rms=0.018074Jy  sigma=0.766448
! Inverting map 
! Added new window around map position (-2.1, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00677048 Jy
! Component: 100  -  total flux cleaned = 0.00990077 Jy
! Total flux subtracted in 100 components = 0.00990077 Jy
! Clean residual min=-0.001780 max=0.002038 Jy/beam
! Clean residual mean=-0.000001 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.048928 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.048928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015340Jy  sigma=0.608630
! Fit after  self-cal, rms=0.015131Jy  sigma=0.599612
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.415 mas, bmaj=4.159 mas, bpa=-8.862 degrees
! Estimated noise=0.467494 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00274651 Jy
! Component: 100  -  total flux cleaned = 0.00425191 Jy
! Component: 150  -  total flux cleaned = 0.00519079 Jy
! Component: 200  -  total flux cleaned = 0.00580139 Jy
! Total flux subtracted in 200 components = 0.00580139 Jy
! Clean residual min=-0.001352 max=0.001362 Jy/beam
! Clean residual mean=-0.000002 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.0547294 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 36 components and 0.0547294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014575Jy  sigma=0.570552
! Fit after  self-cal, rms=0.014539Jy  sigma=0.569119
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.415 x 4.159 at -8.862 degrees (North through East)
! Clean map  min=-0.0012055  max=0.041922 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.00     LA        1.04     
!   MK        1.06     NL        1.00     OV        0.96     PT        0.86     
!   SC        0.92     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.16     HN        1.02     LA        1.11     
!   MK        1.02     NL        1.08     OV        1.04     PT        0.97     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.87     HN        0.99     LA        1.08     
!   MK        0.87     NL        0.93     OV        1.05     PT        0.97     
!   SC        0.94     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.08     HN        1.00     LA        1.07     
!   MK        1.07     NL        1.01     OV        0.98     PT        0.97     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.99     LA        1.00     
!   MK        1.11     NL        0.99     OV        0.97     PT        0.88     
!   SC        1.05     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        1.00     LA        1.05     
!   MK        0.97     NL        0.90     OV        0.93     PT        1.08     
!   SC        1.06     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.04     LA        0.98     
!   MK        1.00     NL        0.96     OV        0.95     PT        0.91     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        0.98     LA        0.98     
!   MK        0.97     NL        0.94     OV        0.94     PT        0.97     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.014539Jy  sigma=0.569119
! Fit after  self-cal, rms=0.013380Jy  sigma=0.542309
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.448 mas, bmaj=4.176 mas, bpa=-9.012 degrees
! Estimated noise=0.462504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258812 Jy
! Component: 100  -  total flux cleaned = 0.000366888 Jy
! Component: 150  -  total flux cleaned = 0.000398222 Jy
! Component: 200  -  total flux cleaned = 0.000407294 Jy
! Total flux subtracted in 200 components = 0.000407294 Jy
! Clean residual min=-0.000993 max=0.001036 Jy/beam
! Clean residual mean=-0.000001 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.0551367 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 54 components and 0.0551367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013352Jy  sigma=0.540688
! Fit after  self-cal, rms=0.013349Jy  sigma=0.540499
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013349Jy  sigma=0.540499
! Fit after  self-cal, rms=0.013353Jy  sigma=0.540296
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.448 mas, bmaj=4.179 mas, bpa=-9.126 degrees
! Estimated noise=0.462531 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.58054e-05 Jy
! Component: 100  -  total flux cleaned = 0.000101858 Jy
! Component: 150  -  total flux cleaned = 0.000108975 Jy
! Component: 200  -  total flux cleaned = 0.000114739 Jy
! Total flux subtracted in 200 components = 0.000114739 Jy
! Clean residual min=-0.000985 max=0.001027 Jy/beam
! Clean residual mean=-0.000001 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.0552515 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 0.0552515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013342Jy  sigma=0.539734
! Fit after  self-cal, rms=0.013340Jy  sigma=0.539690
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.20261e-05 Jy
! Component: 100  -  total flux cleaned = 6.93646e-06 Jy
! Component: 150  -  total flux cleaned = 2.36462e-06 Jy
! Component: 200  -  total flux cleaned = -5.77723e-06 Jy
! Total flux subtracted in 200 components = -5.77723e-06 Jy
! Clean residual min=-0.000988 max=0.001016 Jy/beam
! Clean residual mean=-0.000001 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.0552457 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 68 components and 0.0552457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013336Jy  sigma=0.539512
! Fit after  self-cal, rms=0.013336Jy  sigma=0.539498
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013336Jy  sigma=0.539498
! Fit after  self-cal, rms=0.013331Jy  sigma=0.539347
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.449 mas, bmaj=4.182 mas, bpa=-9.237 degrees
! Estimated noise=0.462237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.78978e-05 Jy
! Component: 100  -  total flux cleaned = -4.77799e-05 Jy
! Component: 150  -  total flux cleaned = -4.28291e-05 Jy
! Component: 200  -  total flux cleaned = -4.68059e-05 Jy
! Total flux subtracted in 200 components = -4.68059e-05 Jy
! Clean residual min=-0.000985 max=0.001019 Jy/beam
! Clean residual mean=-0.000001 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.0551989 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 75 components and 0.0551989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013326Jy  sigma=0.539122
! Fit after  self-cal, rms=0.013326Jy  sigma=0.539109
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.11916e-05 Jy
! Component: 100  -  total flux cleaned = -1.46363e-05 Jy
! Component: 150  -  total flux cleaned = -1.45611e-05 Jy
! Component: 200  -  total flux cleaned = -1.44981e-05 Jy
! Total flux subtracted in 200 components = -1.44981e-05 Jy
! Clean residual min=-0.000989 max=0.001014 Jy/beam
! Clean residual mean=-0.000001 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.0551844 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.0551844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013325Jy  sigma=0.539015
! Fit after  self-cal, rms=0.013325Jy  sigma=0.539010
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013325Jy  sigma=0.539010
! Fit after  self-cal, rms=0.013316Jy  sigma=0.538934
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.332 mas, bmaj=4.888 mas, bpa=-9.034 degrees
! Estimated noise=0.599278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000211275 Jy
! Component: 100  -  total flux cleaned = -0.000300706 Jy
! Component: 150  -  total flux cleaned = -0.000322287 Jy
! Component: 200  -  total flux cleaned = -0.000331503 Jy
! Total flux subtracted in 200 components = -0.000331503 Jy
! Clean residual min=-0.001034 max=0.001267 Jy/beam
! Clean residual mean=-0.000004 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.0548529 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 88 components and 0.0548529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013314Jy  sigma=0.539092
! Fit after  self-cal, rms=0.013314Jy  sigma=0.539065
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.86597e-05 Jy
! Component: 100  -  total flux cleaned = -3.2976e-05 Jy
! Component: 150  -  total flux cleaned = -3.53696e-05 Jy
! Component: 200  -  total flux cleaned = -3.99683e-05 Jy
! Total flux subtracted in 200 components = -3.99683e-05 Jy
! Clean residual min=-0.001036 max=0.001266 Jy/beam
! Clean residual mean=-0.000004 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.0548129 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 92 components and 0.0548129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013314Jy  sigma=0.539198
! Fit after  self-cal, rms=0.013314Jy  sigma=0.539184
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.45 mas, bmaj=4.185 mas, bpa=-9.318 degrees
! Estimated noise=0.461763 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.45 x 4.185 at -9.318 degrees (North through East)
! Clean map  min=-0.00093726  max=0.04144 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.223 mas, bmaj=3.887 mas, bpa=-7.999 degrees
! Estimated noise=0.596715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0317797 Jy
! Component: 100  -  total flux cleaned = 0.0416783 Jy
! Component: 150  -  total flux cleaned = 0.0467037 Jy
! Component: 200  -  total flux cleaned = 0.0495855 Jy
! Total flux subtracted in 200 components = 0.0495855 Jy
! Clean residual min=-0.001563 max=0.001764 Jy/beam
! Clean residual mean=-0.000001 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.0495854 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0495854 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.45 mas, bmaj=4.185 mas, bpa=-9.318 degrees
! Estimated noise=0.461763 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225167 Jy
! Component: 100  -  total flux cleaned = 0.00359833 Jy
! Component: 150  -  total flux cleaned = 0.00440168 Jy
! Component: 200  -  total flux cleaned = 0.0046471 Jy
! Total flux subtracted in 200 components = 0.0046471 Jy
! Clean residual min=-0.001023 max=0.001047 Jy/beam
! Clean residual mean=-0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.0542325 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 33 components and 0.0542325 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.332 mas, bmaj=4.888 mas, bpa=-9.034 degrees
! Estimated noise=0.599278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00042798 Jy
! Component: 100  -  total flux cleaned = 0.000491294 Jy
! Component: 150  -  total flux cleaned = 0.000529035 Jy
! Component: 200  -  total flux cleaned = 0.000528816 Jy
! Total flux subtracted in 200 components = 0.000528816 Jy
! Clean residual min=-0.001016 max=0.001249 Jy/beam
! Clean residual mean=-0.000004 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.0547614 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.0082e-07 Jy
! Component: 100  -  total flux cleaned = -4.97302e-07 Jy
! Component: 150  -  total flux cleaned = -3.82462e-06 Jy
! Component: 200  -  total flux cleaned = -6.8448e-06 Jy
! Total flux subtracted in 200 components = -6.8448e-06 Jy
! Clean residual min=-0.001023 max=0.001257 Jy/beam
! Clean residual mean=-0.000004 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.0547545 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 46 components and 0.0547545 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.45 mas, bmaj=4.185 mas, bpa=-9.318 degrees
! Estimated noise=0.461763 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.23601e-05 Jy
! Component: 100  -  total flux cleaned = 0.000121195 Jy
! Component: 150  -  total flux cleaned = 0.000153801 Jy
! Component: 200  -  total flux cleaned = 0.000174638 Jy
! Total flux subtracted in 200 components = 0.000174638 Jy
! Clean residual min=-0.000980 max=0.001026 Jy/beam
! Clean residual mean=-0.000001 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.0549291 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 57 components and 0.0549291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013315Jy  sigma=0.539589
! Fit after  self-cal, rms=0.013313Jy  sigma=0.539522
wmodel /d2/scr/pima/bp177b_uvs/J1007+3444_C_map.mod
! Writing 57 model components to file: /d2/scr/pima/bp177b_uvs/J1007+3444_C_map.mod
wobs /d2/scr/pima/bp177b_uvs/J1007+3444_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177b_uvs/J1007+3444_C_uvs.fits
wwins /d2/scr/pima/bp177b_uvs/J1007+3444_C_map.win
! wwins: Wrote 2 windows to /d2/scr/pima/bp177b_uvs/J1007+3444_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000190295 Jy
! Component: 100  -  total flux cleaned = 0.000224568 Jy
! Component: 150  -  total flux cleaned = 0.000240913 Jy
! Component: 200  -  total flux cleaned = 0.000256363 Jy
! Component: 250  -  total flux cleaned = 0.000285657 Jy
! Component: 300  -  total flux cleaned = 0.000342432 Jy
! Component: 350  -  total flux cleaned = 0.000328433 Jy
! Component: 400  -  total flux cleaned = 0.00028863 Jy
! Component: 450  -  total flux cleaned = 0.000275665 Jy
! Component: 500  -  total flux cleaned = 0.000250413 Jy
! Component: 550  -  total flux cleaned = 0.000262493 Jy
! Component: 600  -  total flux cleaned = 0.000226888 Jy
! Component: 650  -  total flux cleaned = 0.000227166 Jy
! Component: 700  -  total flux cleaned = 0.000238265 Jy
! Component: 750  -  total flux cleaned = 0.000227232 Jy
! Component: 800  -  total flux cleaned = 0.000248814 Jy
! Component: 850  -  total flux cleaned = 0.000248977 Jy
! Component: 900  -  total flux cleaned = 0.000238698 Jy
! Component: 950  -  total flux cleaned = 0.000259305 Jy
! Component: 1000  -  total flux cleaned = 0.00025916 Jy
! Component: 1050  -  total flux cleaned = 0.000278906 Jy
! Component: 1100  -  total flux cleaned = 0.000298234 Jy
! Component: 1150  -  total flux cleaned = 0.000278817 Jy
! Component: 1200  -  total flux cleaned = 0.000297915 Jy
! Component: 1250  -  total flux cleaned = 0.000335196 Jy
! Component: 1300  -  total flux cleaned = 0.000298671 Jy
! Component: 1350  -  total flux cleaned = 0.000307747 Jy
! Component: 1400  -  total flux cleaned = 0.000281023 Jy
! Component: 1450  -  total flux cleaned = 0.000307475 Jy
! Component: 1500  -  total flux cleaned = 0.000281381 Jy
! Component: 1550  -  total flux cleaned = 0.000281167 Jy
! Component: 1600  -  total flux cleaned = 0.000264276 Jy
! Component: 1650  -  total flux cleaned = 0.000264356 Jy
! Component: 1700  -  total flux cleaned = 0.000280967 Jy
! Component: 1750  -  total flux cleaned = 0.000297216 Jy
! Component: 1800  -  total flux cleaned = 0.00029729 Jy
! Component: 1850  -  total flux cleaned = 0.000305133 Jy
! Component: 1900  -  total flux cleaned = 0.000281559 Jy
! Component: 1950  -  total flux cleaned = 0.000258156 Jy
! Component: 2000  -  total flux cleaned = 0.000258115 Jy
! Component: 2050  -  total flux cleaned = 0.000265669 Jy
! Component: 2100  -  total flux cleaned = 0.000243123 Jy
! Component: 2150  -  total flux cleaned = 0.000228284 Jy
! Component: 2200  -  total flux cleaned = 0.000235537 Jy
! Component: 2250  -  total flux cleaned = 0.000198954 Jy
! Component: 2300  -  total flux cleaned = 0.000198958 Jy
! Component: 2350  -  total flux cleaned = 0.000177476 Jy
! Component: 2400  -  total flux cleaned = 0.000149152 Jy
! Component: 2450  -  total flux cleaned = 0.000121122 Jy
! Component: 2500  -  total flux cleaned = 0.00010721 Jy
! Component: 2550  -  total flux cleaned = 8.64725e-05 Jy
! Component: 2600  -  total flux cleaned = 7.95378e-05 Jy
! Component: 2650  -  total flux cleaned = 2.54236e-05 Jy
! Component: 2700  -  total flux cleaned = 1.87898e-05 Jy
! Component: 2750  -  total flux cleaned = -1.44702e-05 Jy
! Component: 2800  -  total flux cleaned = -2.10662e-05 Jy
! Component: 2850  -  total flux cleaned = -4.72439e-05 Jy
! Component: 2900  -  total flux cleaned = -9.26724e-05 Jy
! Component: 2950  -  total flux cleaned = -9.91278e-05 Jy
! Component: 3000  -  total flux cleaned = -0.000105633 Jy
! Component: 3050  -  total flux cleaned = -0.000156466 Jy
! Component: 3100  -  total flux cleaned = -0.000175323 Jy
! Component: 3150  -  total flux cleaned = -0.000181571 Jy
! Component: 3200  -  total flux cleaned = -0.000212748 Jy
! Component: 3250  -  total flux cleaned = -0.000206556 Jy
! Component: 3300  -  total flux cleaned = -0.000231122 Jy
! Component: 3350  -  total flux cleaned = -0.000243326 Jy
! Component: 3400  -  total flux cleaned = -0.000291905 Jy
! Component: 3450  -  total flux cleaned = -0.000297947 Jy
! Component: 3500  -  total flux cleaned = -0.000321883 Jy
! Component: 3550  -  total flux cleaned = -0.00035164 Jy
! Component: 3600  -  total flux cleaned = -0.000363479 Jy
! Component: 3650  -  total flux cleaned = -0.000387054 Jy
! Component: 3700  -  total flux cleaned = -0.000428037 Jy
! Component: 3750  -  total flux cleaned = -0.000433879 Jy
! Component: 3800  -  total flux cleaned = -0.000462818 Jy
! Component: 3850  -  total flux cleaned = -0.000497327 Jy
! Component: 3900  -  total flux cleaned = -0.000497309 Jy
! Component: 3950  -  total flux cleaned = -0.000525779 Jy
! Component: 4000  -  total flux cleaned = -0.000525803 Jy
! Component: 4050  -  total flux cleaned = -0.000553954 Jy
! Total flux subtracted in 4096 components = -0.00055957 Jy
! Clean residual min=-0.000329 max=0.000310 Jy/beam
! Clean residual mean=-0.000002 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.0543696 Jy
keep
! Adding 269 model components to the UV plane model.
! The established model now contains 326 components and 0.0543696 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177b_uvs/J1007+3444_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.45 x 4.185 at -9.318 degrees (North through East)
! Clean map  min=-0.00060074  max=0.041254 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177b_uvs/J1007+3444_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0412541 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.32833e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.678357 0.678357 1.35671 2.71343 5.42686 10.8537 21.7074 43.4148 86.8297
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.041 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  442.245 
quit
! Quitting program
! Log file /d2/scr/pima/bp177b_uvs/J1007+3444_C_uvs.log closed on Sat Mar 22 08:08:28 2014