! Started logfile: /d2/scr/pima/bp177b_uvs/J1004+2225_X_uvs.log on Sat Mar 22 08:07:47 2014
obs /d2/scr/pima/bp177b_uvs/J1004+2225_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177b_uvs/J1004+2225_X_uva.fits
! AN table 1: 3 integrations on 10 of 10 possible baselines.
! AN table 2: 3 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.636364 visibilities/baseline/integration-bin.
! Found source: J1004+2225
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 168 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177b_uvs/J1004+2225_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 6 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000857Jy  sigma=45.443609
! Fit after  self-cal, rms=0.986898Jy  sigma=45.861978
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.631 mas, bmaj=11.91 mas, bpa=27.52 degrees
! Estimated noise=1.79657 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00944747 Jy
! Component: 100  -  total flux cleaned = 0.00811118 Jy
! Total flux subtracted in 100 components = 0.00811118 Jy
! Clean residual min=-0.001270 max=0.001270 Jy/beam
! Clean residual mean=0.000000 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.00811118 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.00811118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014225Jy  sigma=0.598041
! Fit after  self-cal, rms=0.012526Jy  sigma=0.506625
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.272 mas, bmaj=10.85 mas, bpa=28.88 degrees
! Estimated noise=1.43374 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000513603 Jy
! Component: 100  -  total flux cleaned = -0.00126491 Jy
! Component: 150  -  total flux cleaned = -0.00130532 Jy
! Component: 200  -  total flux cleaned = -0.00153349 Jy
! Total flux subtracted in 200 components = -0.00153349 Jy
! Clean residual min=-0.000817 max=0.000817 Jy/beam
! Clean residual mean=0.000003 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.00657769 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 87 components and 0.00657769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011458Jy  sigma=0.471483
! Fit after  self-cal, rms=0.011374Jy  sigma=0.468975
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.272 x 10.85 at 28.88 degrees (North through East)
! Clean map  min=-0.003506  max=0.0081713 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     LA        1.03     OV        1.07     PT        0.88     
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Fit before self-cal, rms=0.011374Jy  sigma=0.468975
! Fit after  self-cal, rms=0.011338Jy  sigma=0.467832
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.285 mas, bmaj=10.88 mas, bpa=29.02 degrees
! Estimated noise=1.41836 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000271419 Jy
! Component: 100  -  total flux cleaned = -0.000522924 Jy
! Component: 150  -  total flux cleaned = -0.000602503 Jy
! Component: 200  -  total flux cleaned = -0.000644237 Jy
! Total flux subtracted in 200 components = -0.000644237 Jy
! Clean residual min=-0.000396 max=0.000403 Jy/beam
! Clean residual mean=0.000001 rms=0.000118 Jy/beam
! Combined flux in latest and established models = 0.00593346 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 136 components and 0.00593345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011233Jy  sigma=0.465931
! Fit after  self-cal, rms=0.011222Jy  sigma=0.465417
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011222Jy  sigma=0.465417
! Fit after  self-cal, rms=0.011313Jy  sigma=0.465240
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.284 mas, bmaj=10.88 mas, bpa=29.03 degrees
! Estimated noise=1.42626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000290021 Jy
! Component: 100  -  total flux cleaned = -0.0003465 Jy
! Component: 150  -  total flux cleaned = -0.000296865 Jy
! Component: 200  -  total flux cleaned = -0.000247409 Jy
! Total flux subtracted in 200 components = -0.000247409 Jy
! Clean residual min=-0.000218 max=0.000224 Jy/beam
! Clean residual mean=0.000001 rms=0.000076 Jy/beam
! Combined flux in latest and established models = 0.00568605 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 181 components and 0.00568605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011271Jy  sigma=0.464514
! Fit after  self-cal, rms=0.011269Jy  sigma=0.464418
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000309375 Jy
! Component: 100  -  total flux cleaned = -0.000558318 Jy
! Component: 150  -  total flux cleaned = -0.000689633 Jy
! Component: 200  -  total flux cleaned = -0.000711157 Jy
! Total flux subtracted in 200 components = -0.000711157 Jy
! Clean residual min=-0.000181 max=0.000181 Jy/beam
! Clean residual mean=0.000001 rms=0.000067 Jy/beam
! Combined flux in latest and established models = 0.00497489 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 227 components and 0.00497489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011240Jy  sigma=0.463896
! Fit after  self-cal, rms=0.011238Jy  sigma=0.463834
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011238Jy  sigma=0.463834
! Fit after  self-cal, rms=0.011259Jy  sigma=0.463801
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.282 mas, bmaj=10.89 mas, bpa=29.02 degrees
! Estimated noise=1.42932 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000187581 Jy
! Component: 100  -  total flux cleaned = -0.000284712 Jy
! Component: 150  -  total flux cleaned = -0.000348279 Jy
! Component: 200  -  total flux cleaned = -0.000359977 Jy
! Total flux subtracted in 200 components = -0.000359977 Jy
! Clean residual min=-0.000198 max=0.000206 Jy/beam
! Clean residual mean=0.000001 rms=0.000072 Jy/beam
! Combined flux in latest and established models = 0.00461491 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 261 components and 0.00461491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011238Jy  sigma=0.463279
! Fit after  self-cal, rms=0.011235Jy  sigma=0.463196
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000252911 Jy
! Component: 100  -  total flux cleaned = -0.000471054 Jy
! Component: 150  -  total flux cleaned = -0.000609154 Jy
! Component: 200  -  total flux cleaned = -0.000655366 Jy
! Total flux subtracted in 200 components = -0.000655366 Jy
! Clean residual min=-0.000206 max=0.000207 Jy/beam
! Clean residual mean=0.000001 rms=0.000070 Jy/beam
! Combined flux in latest and established models = 0.00395955 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 300 components and 0.00395955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011212Jy  sigma=0.462736
! Fit after  self-cal, rms=0.011211Jy  sigma=0.462656
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011211Jy  sigma=0.462656
! Fit after  self-cal, rms=0.011222Jy  sigma=0.462637
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.517 mas, bmaj=10.72 mas, bpa=29.54 degrees
! Estimated noise=1.43967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.54975e-06 Jy
! Component: 100  -  total flux cleaned = -3.77841e-05 Jy
! Component: 150  -  total flux cleaned = -1.2827e-05 Jy
! Component: 200  -  total flux cleaned = 4.60991e-05 Jy
! Total flux subtracted in 200 components = 4.60991e-05 Jy
! Clean residual min=-0.000268 max=0.000260 Jy/beam
! Clean residual mean=0.000001 rms=0.000078 Jy/beam
! Combined flux in latest and established models = 0.00400564 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 330 components and 0.00400564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011206Jy  sigma=0.462105
! Fit after  self-cal, rms=0.011202Jy  sigma=0.462020
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.71746e-05 Jy
! Component: 100  -  total flux cleaned = -0.00015154 Jy
! Component: 150  -  total flux cleaned = -0.000224862 Jy
! Component: 200  -  total flux cleaned = -0.000269928 Jy
! Total flux subtracted in 200 components = -0.000269928 Jy
! Clean residual min=-0.000205 max=0.000199 Jy/beam
! Clean residual mean=0.000001 rms=0.000066 Jy/beam
! Combined flux in latest and established models = 0.00373572 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 360 components and 0.00373571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011180Jy  sigma=0.461554
! Fit after  self-cal, rms=0.011181Jy  sigma=0.461489
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.283 mas, bmaj=10.89 mas, bpa=29.01 degrees
! Estimated noise=1.43121 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.283 x 10.89 at 29.01 degrees (North through East)
! Clean map  min=-0.0032321  max=0.0078445 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.635 mas, bmaj=11.95 mas, bpa=27.61 degrees
! Estimated noise=1.79975 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00853564 Jy
! Component: 100  -  total flux cleaned = 0.00837819 Jy
! Component: 150  -  total flux cleaned = 0.00860325 Jy
! Component: 200  -  total flux cleaned = 0.00852914 Jy
! Total flux subtracted in 200 components = 0.00852914 Jy
! Clean residual min=-0.001246 max=0.001233 Jy/beam
! Clean residual mean=0.000002 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.00852914 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 62 model components to the UV plane model.
! The established model now contains 62 components and 0.00852914 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.283 mas, bmaj=10.89 mas, bpa=29.01 degrees
! Estimated noise=1.43121 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.365e-05 Jy
! Component: 100  -  total flux cleaned = -0.000321191 Jy
! Component: 150  -  total flux cleaned = -0.000424819 Jy
! Component: 200  -  total flux cleaned = -0.00061276 Jy
! Total flux subtracted in 200 components = -0.00061276 Jy
! Clean residual min=-0.000468 max=0.000468 Jy/beam
! Clean residual mean=0.000001 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.00791638 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 133 components and 0.00791639 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.517 mas, bmaj=10.72 mas, bpa=29.54 degrees
! Estimated noise=1.43967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.10284e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122638 Jy
! Component: 150  -  total flux cleaned = 0.000184515 Jy
! Component: 200  -  total flux cleaned = 0.000257669 Jy
! Total flux subtracted in 200 components = 0.000257669 Jy
! Clean residual min=-0.000335 max=0.000338 Jy/beam
! Clean residual mean=0.000001 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.00817405 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.95054e-05 Jy
! Component: 100  -  total flux cleaned = 0.000201218 Jy
! Component: 150  -  total flux cleaned = 0.000304156 Jy
! Component: 200  -  total flux cleaned = 0.000429034 Jy
! Total flux subtracted in 200 components = 0.000429034 Jy
! Clean residual min=-0.000781 max=0.000781 Jy/beam
! Clean residual mean=0.000002 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.00860309 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 204 components and 0.00860309 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.283 mas, bmaj=10.89 mas, bpa=29.01 degrees
! Estimated noise=1.43121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000382439 Jy
! Component: 100  -  total flux cleaned = 0.000269378 Jy
! Component: 150  -  total flux cleaned = 0.000217896 Jy
! Component: 200  -  total flux cleaned = 0.000246184 Jy
! Total flux subtracted in 200 components = 0.000246184 Jy
! Clean residual min=-0.000463 max=0.000453 Jy/beam
! Clean residual mean=0.000002 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.00884927 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 241 components and 0.00884927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011207Jy  sigma=0.461702
! Fit after  self-cal, rms=0.011198Jy  sigma=0.461488
wmodel /d2/scr/pima/bp177b_uvs/J1004+2225_X_map.mod
! Writing 241 model components to file: /d2/scr/pima/bp177b_uvs/J1004+2225_X_map.mod
wobs /d2/scr/pima/bp177b_uvs/J1004+2225_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177b_uvs/J1004+2225_X_uvs.fits
wwins /d2/scr/pima/bp177b_uvs/J1004+2225_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177b_uvs/J1004+2225_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.283 x 10.89 at 29.01 degrees (North through East)
! Clean map  min=-0.0038507  max=0.0083596 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177b_uvs/J1004+2225_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.00835965 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000100378 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.60222 3.60222 7.20444 14.4089 28.8178 57.6355
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.008 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  83.281 
quit
! Quitting program
! Log file /d2/scr/pima/bp177b_uvs/J1004+2225_X_uvs.log closed on Sat Mar 22 08:07:50 2014