! Started logfile: /d2/scr/pima/bp177b_uvs/J0935-3849_X_uvs.log on Sat Mar 22 08:07:33 2014
obs /d2/scr/pima/bp177b_uvs/J0935-3849_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177b_uvs/J0935-3849_X_uva.fits
! AN table 1: 5 integrations on 10 of 10 possible baselines.
! AN table 2: 4 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.685185 visibilities/baseline/integration-bin.
! Found source: J0935-3849
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 296 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177b_uvs/J0935-3849_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000026Jy  sigma=28.194361
! Fit after  self-cal, rms=0.981865Jy  sigma=28.964718
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9427 mas, bmaj=14.57 mas, bpa=23.46 degrees
! Estimated noise=1.83121 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135255 Jy
! Component: 100  -  total flux cleaned = 0.0155461 Jy
! Total flux subtracted in 100 components = 0.0155461 Jy
! Clean residual min=-0.002416 max=0.002433 Jy/beam
! Clean residual mean=0.000008 rms=0.001003 Jy/beam
! Combined flux in latest and established models = 0.0155461 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0155461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017920Jy  sigma=0.493791
! Fit after  self-cal, rms=0.016908Jy  sigma=0.458296
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.169 mas, bmaj=16.37 mas, bpa=23.28 degrees
! Estimated noise=1.50383 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000626684 Jy
! Component: 100  -  total flux cleaned = -0.000228988 Jy
! Component: 150  -  total flux cleaned = -0.000544165 Jy
! Component: 200  -  total flux cleaned = -0.000780651 Jy
! Total flux subtracted in 200 components = -0.000780651 Jy
! Clean residual min=-0.001334 max=0.001316 Jy/beam
! Clean residual mean=0.000016 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.0147654 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 70 components and 0.0147654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015777Jy  sigma=0.430997
! Fit after  self-cal, rms=0.015516Jy  sigma=0.425479
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.169 x 16.37 at 23.28 degrees (North through East)
! Clean map  min=-0.0022996  max=0.012769 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    NL        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     LA        0.97     OV        0.92     PT        0.85     
!   SC        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    NL        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    NL        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     LA        0.92     OV        0.98     PT        0.97     
!   SC        0.86     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    NL        0.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    NL        0.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    NL        0.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    NL        0.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    NL        0.00*    
! 
! 
! Fit before self-cal, rms=0.015516Jy  sigma=0.425479
! Fit after  self-cal, rms=0.015068Jy  sigma=0.422372
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.162 mas, bmaj=16.43 mas, bpa=23.29 degrees
! Estimated noise=1.46047 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102384 Jy
! Component: 100  -  total flux cleaned = 0.00145739 Jy
! Component: 150  -  total flux cleaned = 0.00149213 Jy
! Component: 200  -  total flux cleaned = 0.00161938 Jy
! Total flux subtracted in 200 components = 0.00161938 Jy
! Clean residual min=-0.000529 max=0.000533 Jy/beam
! Clean residual mean=0.000003 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.0163848 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 112 components and 0.0163848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014848Jy  sigma=0.418038
! Fit after  self-cal, rms=0.014787Jy  sigma=0.417270
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014787Jy  sigma=0.417270
! Fit after  self-cal, rms=0.014839Jy  sigma=0.416166
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.163 mas, bmaj=16.35 mas, bpa=23.28 degrees
! Estimated noise=1.45325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000918121 Jy
! Component: 100  -  total flux cleaned = 0.00136078 Jy
! Component: 150  -  total flux cleaned = 0.00154228 Jy
! Component: 200  -  total flux cleaned = 0.00154247 Jy
! Total flux subtracted in 200 components = 0.00154247 Jy
! Clean residual min=-0.000372 max=0.000373 Jy/beam
! Clean residual mean=0.000001 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.0179273 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 158 components and 0.0179273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014720Jy  sigma=0.414167
! Fit after  self-cal, rms=0.014685Jy  sigma=0.413704
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000231658 Jy
! Component: 100  -  total flux cleaned = 7.27483e-05 Jy
! Component: 150  -  total flux cleaned = 0.000136798 Jy
! Component: 200  -  total flux cleaned = 9.49115e-05 Jy
! Total flux subtracted in 200 components = 9.49115e-05 Jy
! Clean residual min=-0.000352 max=0.000351 Jy/beam
! Clean residual mean=-0.000000 rms=0.000139 Jy/beam
! Combined flux in latest and established models = 0.0180222 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 194 components and 0.0180222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014607Jy  sigma=0.412210
! Fit after  self-cal, rms=0.014579Jy  sigma=0.411965
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014579Jy  sigma=0.411965
! Fit after  self-cal, rms=0.014609Jy  sigma=0.411705
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.159 mas, bmaj=16.35 mas, bpa=23.29 degrees
! Estimated noise=1.44391 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102667 Jy
! Component: 100  -  total flux cleaned = 0.000126496 Jy
! Component: 150  -  total flux cleaned = 6.85763e-05 Jy
! Component: 200  -  total flux cleaned = -4.38551e-05 Jy
! Total flux subtracted in 200 components = -4.38551e-05 Jy
! Clean residual min=-0.000312 max=0.000312 Jy/beam
! Clean residual mean=-0.000002 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.0179783 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 229 components and 0.0179783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014548Jy  sigma=0.410337
! Fit after  self-cal, rms=0.014522Jy  sigma=0.410179
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.41133e-05 Jy
! Component: 100  -  total flux cleaned = 9.12311e-06 Jy
! Component: 150  -  total flux cleaned = -2.26355e-05 Jy
! Component: 200  -  total flux cleaned = -7.1965e-05 Jy
! Total flux subtracted in 200 components = -7.1965e-05 Jy
! Clean residual min=-0.000279 max=0.000276 Jy/beam
! Clean residual mean=-0.000001 rms=0.000100 Jy/beam
! Combined flux in latest and established models = 0.0179064 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 254 components and 0.0179064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014486Jy  sigma=0.409303
! Fit after  self-cal, rms=0.014468Jy  sigma=0.409210
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014468Jy  sigma=0.409210
! Fit after  self-cal, rms=0.014198Jy  sigma=0.405913
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.042 mas, bmaj=17.95 mas, bpa=16.68 degrees
! Estimated noise=1.67987 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000218543 Jy
! Component: 100  -  total flux cleaned = -0.000266066 Jy
! Component: 150  -  total flux cleaned = -0.000303361 Jy
! Component: 200  -  total flux cleaned = -0.000342383 Jy
! Total flux subtracted in 200 components = -0.000342383 Jy
! Clean residual min=-0.000350 max=0.000343 Jy/beam
! Clean residual mean=-0.000009 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.017564 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 284 components and 0.017564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014176Jy  sigma=0.405398
! Fit after  self-cal, rms=0.014171Jy  sigma=0.404978
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123273 Jy
! Component: 100  -  total flux cleaned = 4.76684e-05 Jy
! Component: 150  -  total flux cleaned = -4.64333e-05 Jy
! Component: 200  -  total flux cleaned = -2.61228e-05 Jy
! Total flux subtracted in 200 components = -2.61228e-05 Jy
! Clean residual min=-0.000179 max=0.000182 Jy/beam
! Clean residual mean=-0.000002 rms=0.000067 Jy/beam
! Combined flux in latest and established models = 0.0175379 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 322 components and 0.0175379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014158Jy  sigma=0.404664
! Fit after  self-cal, rms=0.014147Jy  sigma=0.404558
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.154 mas, bmaj=16.33 mas, bpa=23.29 degrees
! Estimated noise=1.42328 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.154 x 16.33 at 23.29 degrees (North through East)
! Clean map  min=-0.0022827  max=0.012171 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9348 mas, bmaj=14.61 mas, bpa=23.47 degrees
! Estimated noise=1.70961 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00925391 Jy
! Component: 100  -  total flux cleaned = 0.0100971 Jy
! Component: 150  -  total flux cleaned = 0.0100367 Jy
! Component: 200  -  total flux cleaned = 0.00968111 Jy
! Total flux subtracted in 200 components = 0.00968111 Jy
! Clean residual min=-0.001575 max=0.001598 Jy/beam
! Clean residual mean=0.000007 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.00968111 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 50 model components to the UV plane model.
! The established model now contains 50 components and 0.00968111 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.154 mas, bmaj=16.33 mas, bpa=23.29 degrees
! Estimated noise=1.42328 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000129515 Jy
! Component: 100  -  total flux cleaned = -4.99496e-05 Jy
! Component: 150  -  total flux cleaned = -0.000765964 Jy
! Component: 200  -  total flux cleaned = -0.00155678 Jy
! Total flux subtracted in 200 components = -0.00155678 Jy
! Clean residual min=-0.000815 max=0.000809 Jy/beam
! Clean residual mean=0.000010 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.00812433 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 87 components and 0.00812433 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.042 mas, bmaj=17.95 mas, bpa=16.68 degrees
! Estimated noise=1.67987 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000691919 Jy
! Component: 100  -  total flux cleaned = -0.00081912 Jy
! Component: 150  -  total flux cleaned = -0.000906563 Jy
! Component: 200  -  total flux cleaned = -0.000878373 Jy
! Total flux subtracted in 200 components = -0.000878373 Jy
! Clean residual min=-0.000438 max=0.000433 Jy/beam
! Clean residual mean=-0.000003 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.00724595 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.68892e-05 Jy
! Component: 100  -  total flux cleaned = -5.24679e-05 Jy
! Component: 150  -  total flux cleaned = -0.000226487 Jy
! Component: 200  -  total flux cleaned = -0.000479495 Jy
! Total flux subtracted in 200 components = -0.000479495 Jy
! Clean residual min=-0.000942 max=0.000936 Jy/beam
! Clean residual mean=-0.000000 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.00676646 Jy
! Adding 85 model components to the UV plane model.
! The established model now contains 168 components and 0.00676646 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.154 mas, bmaj=16.33 mas, bpa=23.29 degrees
! Estimated noise=1.42328 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000220316 Jy
! Component: 100  -  total flux cleaned = 0.000100484 Jy
! Component: 150  -  total flux cleaned = 0.000209397 Jy
! Component: 200  -  total flux cleaned = 0.000513041 Jy
! Total flux subtracted in 200 components = 0.000513041 Jy
! Clean residual min=-0.000470 max=0.000470 Jy/beam
! Clean residual mean=-0.000002 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.0072795 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 201 components and 0.0072795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014229Jy  sigma=0.406759
! Fit after  self-cal, rms=0.014181Jy  sigma=0.406014
wmodel /d2/scr/pima/bp177b_uvs/J0935-3849_X_map.mod
! Writing 201 model components to file: /d2/scr/pima/bp177b_uvs/J0935-3849_X_map.mod
wobs /d2/scr/pima/bp177b_uvs/J0935-3849_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177b_uvs/J0935-3849_X_uvs.fits
wwins /d2/scr/pima/bp177b_uvs/J0935-3849_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp177b_uvs/J0935-3849_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.154 x 16.33 at 23.29 degrees (North through East)
! Clean map  min=-0.0019831  max=0.010783 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177b_uvs/J0935-3849_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0107825 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.47148e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.63523 2.63523 5.27046 10.5409 21.0818 42.1637 84.3274
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.01 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  113.842 
quit
! Quitting program
! Log file /d2/scr/pima/bp177b_uvs/J0935-3849_X_uvs.log closed on Sat Mar 22 08:07:36 2014