! Started logfile: /d2/scr/pima/bp177b_uvs/J0635+4333_X_uvs.log on Sat Mar 22 08:06:38 2014
obs /d2/scr/pima/bp177b_uvs/J0635+4333_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp177b_uvs/J0635+4333_X_uva.fits
! AN table 1: 5 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.772222 visibilities/baseline/integration-bin.
! Found source: J0635+4333
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1112 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp177b_uvs/J0635+4333_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002164Jy  sigma=40.205864
! Fit after  self-cal, rms=0.917707Jy  sigma=36.865493
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7641 mas, bmaj=2.635 mas, bpa=-34.61 degrees
! Estimated noise=0.850441 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0611297 Jy
! Component: 100  -  total flux cleaned = 0.0765512 Jy
! Total flux subtracted in 100 components = 0.0765512 Jy
! Clean residual min=-0.004093 max=0.006750 Jy/beam
! Clean residual mean=0.000003 rms=0.001165 Jy/beam
! Combined flux in latest and established models = 0.0765512 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0765512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024849Jy  sigma=0.853930
! Fit after  self-cal, rms=0.024833Jy  sigma=0.852850
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00762081 Jy
! Component: 100  -  total flux cleaned = 0.0121987 Jy
! Total flux subtracted in 100 components = 0.0121987 Jy
! Clean residual min=-0.003391 max=0.003692 Jy/beam
! Clean residual mean=0.000003 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.0887499 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 18 components and 0.0887499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021466Jy  sigma=0.705829
! Fit after  self-cal, rms=0.021448Jy  sigma=0.705061
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.03 mas, bmaj=2.597 mas, bpa=-34.77 degrees
! Estimated noise=0.553472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00457953 Jy
! Component: 100  -  total flux cleaned = 0.00763824 Jy
! Component: 150  -  total flux cleaned = 0.00986429 Jy
! Component: 200  -  total flux cleaned = 0.0115301 Jy
! Total flux subtracted in 200 components = 0.0115301 Jy
! Clean residual min=-0.003010 max=0.002931 Jy/beam
! Clean residual mean=0.000007 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.10028 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 39 components and 0.10028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020125Jy  sigma=0.648509
! Fit after  self-cal, rms=0.020104Jy  sigma=0.647620
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.03 x 2.597 at -34.77 degrees (North through East)
! Clean map  min=-0.0028844  max=0.081906 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.13     HN        0.94     LA        1.00     
!   MK        0.94     NL        1.07     OV        0.96     PT        0.87     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        0.94     LA        0.94     
!   MK        0.96     NL        1.02     OV        0.97     PT        0.90     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.10     HN        1.03     LA        0.98     
!   MK        1.06     NL        1.01     OV        1.00     PT        0.94     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     LA        0.96     
!   MK        1.03     NL        0.93     OV        0.96     PT        0.89     
!   SC        1.04     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.10     HN        1.16     LA        1.06     
!   MK        1.07     NL        1.01     OV        1.00     PT        0.93     
!   SC        1.08     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.02     LA        0.96     
!   MK        1.01     NL        1.05     OV        1.06     PT        0.86     
!   SC        1.05     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.08     HN        1.03     LA        0.87     
!   MK        1.02     NL        0.98     OV        1.02     PT        0.85     
!   SC        1.16     
! 
! 
! Fit before self-cal, rms=0.020104Jy  sigma=0.647620
! Fit after  self-cal, rms=0.018862Jy  sigma=0.570820
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.03 mas, bmaj=2.643 mas, bpa=-35.07 degrees
! Estimated noise=0.55947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000133596 Jy
! Component: 100  -  total flux cleaned = -0.000106416 Jy
! Component: 150  -  total flux cleaned = -0.000128536 Jy
! Component: 200  -  total flux cleaned = -0.000148749 Jy
! Total flux subtracted in 200 components = -0.000148749 Jy
! Clean residual min=-0.001991 max=0.001725 Jy/beam
! Clean residual mean=0.000002 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.100131 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 52 components and 0.100131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018763Jy  sigma=0.567427
! Fit after  self-cal, rms=0.018757Jy  sigma=0.567072
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018757Jy  sigma=0.567072
! Fit after  self-cal, rms=0.018921Jy  sigma=0.566384
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.031 mas, bmaj=2.646 mas, bpa=-35.13 degrees
! Estimated noise=0.563062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000255205 Jy
! Component: 100  -  total flux cleaned = 0.000187871 Jy
! Component: 150  -  total flux cleaned = 0.000116093 Jy
! Component: 200  -  total flux cleaned = 5.22403e-05 Jy
! Total flux subtracted in 200 components = 5.22403e-05 Jy
! Clean residual min=-0.001962 max=0.001675 Jy/beam
! Clean residual mean=0.000002 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.100183 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 57 components and 0.100183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018858Jy  sigma=0.564538
! Fit after  self-cal, rms=0.018858Jy  sigma=0.564491
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.79753e-05 Jy
! Component: 100  -  total flux cleaned = -7.9044e-05 Jy
! Component: 150  -  total flux cleaned = -0.000104452 Jy
! Component: 200  -  total flux cleaned = -0.000140831 Jy
! Total flux subtracted in 200 components = -0.000140831 Jy
! Clean residual min=-0.001959 max=0.001673 Jy/beam
! Clean residual mean=0.000002 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.100043 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.100043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018840Jy  sigma=0.563719
! Fit after  self-cal, rms=0.018840Jy  sigma=0.563697
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018840Jy  sigma=0.563697
! Fit after  self-cal, rms=0.019000Jy  sigma=0.562955
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.031 mas, bmaj=2.649 mas, bpa=-35.2 degrees
! Estimated noise=0.566814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000386715 Jy
! Component: 100  -  total flux cleaned = 0.000320684 Jy
! Component: 150  -  total flux cleaned = 0.000235845 Jy
! Component: 200  -  total flux cleaned = 0.000159049 Jy
! Total flux subtracted in 200 components = 0.000159049 Jy
! Clean residual min=-0.001986 max=0.001651 Jy/beam
! Clean residual mean=0.000002 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.100202 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 67 components and 0.100202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018956Jy  sigma=0.561877
! Fit after  self-cal, rms=0.018956Jy  sigma=0.561866
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.93894e-05 Jy
! Component: 100  -  total flux cleaned = -6.14267e-05 Jy
! Component: 150  -  total flux cleaned = -7.16124e-05 Jy
! Component: 200  -  total flux cleaned = -8.16598e-05 Jy
! Total flux subtracted in 200 components = -8.16598e-05 Jy
! Clean residual min=-0.001981 max=0.001655 Jy/beam
! Clean residual mean=0.000002 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.10012 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 70 components and 0.10012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018943Jy  sigma=0.561403
! Fit after  self-cal, rms=0.018943Jy  sigma=0.561391
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018943Jy  sigma=0.561391
! Fit after  self-cal, rms=0.018627Jy  sigma=0.542408
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.089 mas, bmaj=2.818 mas, bpa=-34.64 degrees
! Estimated noise=0.648722 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000178555 Jy
! Component: 100  -  total flux cleaned = -0.000299092 Jy
! Component: 150  -  total flux cleaned = -0.000362726 Jy
! Component: 200  -  total flux cleaned = -0.000400205 Jy
! Total flux subtracted in 200 components = -0.000400205 Jy
! Clean residual min=-0.001835 max=0.001674 Jy/beam
! Clean residual mean=0.000002 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.0997198 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 77 components and 0.0997198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018632Jy  sigma=0.541814
! Fit after  self-cal, rms=0.018633Jy  sigma=0.541733
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.25147e-05 Jy
! Component: 100  -  total flux cleaned = -6.88562e-05 Jy
! Component: 150  -  total flux cleaned = -8.08214e-05 Jy
! Component: 200  -  total flux cleaned = -8.65272e-05 Jy
! Total flux subtracted in 200 components = -8.65272e-05 Jy
! Clean residual min=-0.001807 max=0.001653 Jy/beam
! Clean residual mean=0.000002 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.0996333 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 78 components and 0.0996333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018635Jy  sigma=0.541553
! Fit after  self-cal, rms=0.018635Jy  sigma=0.541544
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=2.649 mas, bpa=-35.23 degrees
! Estimated noise=0.567097 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.034 x 2.649 at -35.23 degrees (North through East)
! Clean map  min=-0.0018742  max=0.083545 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7731 mas, bmaj=2.653 mas, bpa=-34.84 degrees
! Estimated noise=0.884442 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0629398 Jy
! Component: 100  -  total flux cleaned = 0.0788666 Jy
! Component: 150  -  total flux cleaned = 0.0866992 Jy
! Component: 200  -  total flux cleaned = 0.0910853 Jy
! Total flux subtracted in 200 components = 0.0910853 Jy
! Clean residual min=-0.002684 max=0.002997 Jy/beam
! Clean residual mean=0.000001 rms=0.000653 Jy/beam
! Combined flux in latest and established models = 0.0910854 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0910854 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=2.649 mas, bpa=-35.23 degrees
! Estimated noise=0.567097 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0034164 Jy
! Component: 100  -  total flux cleaned = 0.00530202 Jy
! Component: 150  -  total flux cleaned = 0.00585881 Jy
! Component: 200  -  total flux cleaned = 0.0062089 Jy
! Total flux subtracted in 200 components = 0.0062089 Jy
! Clean residual min=-0.001949 max=0.001796 Jy/beam
! Clean residual mean=0.000002 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.0972942 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 29 components and 0.0972943 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.089 mas, bmaj=2.818 mas, bpa=-34.64 degrees
! Estimated noise=0.648722 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127769 Jy
! Component: 100  -  total flux cleaned = 0.00155798 Jy
! Component: 150  -  total flux cleaned = 0.00178195 Jy
! Component: 200  -  total flux cleaned = 0.00194595 Jy
! Total flux subtracted in 200 components = 0.00194595 Jy
! Clean residual min=-0.001736 max=0.001627 Jy/beam
! Clean residual mean=0.000002 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.0992402 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123278 Jy
! Component: 100  -  total flux cleaned = 0.000218132 Jy
! Component: 150  -  total flux cleaned = 0.000277795 Jy
! Component: 200  -  total flux cleaned = 0.000320949 Jy
! Total flux subtracted in 200 components = 0.000320949 Jy
! Clean residual min=-0.001770 max=0.001617 Jy/beam
! Clean residual mean=0.000002 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.0995611 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 61 components and 0.0995611 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=2.649 mas, bpa=-35.23 degrees
! Estimated noise=0.567097 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.52478e-05 Jy
! Component: 100  -  total flux cleaned = -0.000143131 Jy
! Component: 150  -  total flux cleaned = -0.000180916 Jy
! Component: 200  -  total flux cleaned = -0.000181348 Jy
! Total flux subtracted in 200 components = -0.000181348 Jy
! Clean residual min=-0.002013 max=0.001526 Jy/beam
! Clean residual mean=0.000001 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.0993798 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 71 components and 0.0993798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018632Jy  sigma=0.543333
! Fit after  self-cal, rms=0.018622Jy  sigma=0.543110
wmodel /d2/scr/pima/bp177b_uvs/J0635+4333_X_map.mod
! Writing 71 model components to file: /d2/scr/pima/bp177b_uvs/J0635+4333_X_map.mod
wobs /d2/scr/pima/bp177b_uvs/J0635+4333_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp177b_uvs/J0635+4333_X_uvs.fits
wwins /d2/scr/pima/bp177b_uvs/J0635+4333_X_map.win
! wwins: Wrote 1 windows to /d2/scr/pima/bp177b_uvs/J0635+4333_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000838041 Jy
! Component: 100  -  total flux cleaned = -0.00114388 Jy
! Component: 150  -  total flux cleaned = -0.00132274 Jy
! Component: 200  -  total flux cleaned = -0.00148987 Jy
! Component: 250  -  total flux cleaned = -0.00153515 Jy
! Component: 300  -  total flux cleaned = -0.00153477 Jy
! Component: 350  -  total flux cleaned = -0.00153449 Jy
! Component: 400  -  total flux cleaned = -0.001515 Jy
! Component: 450  -  total flux cleaned = -0.0015341 Jy
! Component: 500  -  total flux cleaned = -0.00155192 Jy
! Component: 550  -  total flux cleaned = -0.0016036 Jy
! Component: 600  -  total flux cleaned = -0.00160363 Jy
! Component: 650  -  total flux cleaned = -0.0016683 Jy
! Component: 700  -  total flux cleaned = -0.00168374 Jy
! Component: 750  -  total flux cleaned = -0.00169911 Jy
! Component: 800  -  total flux cleaned = -0.00169931 Jy
! Component: 850  -  total flux cleaned = -0.00172823 Jy
! Component: 900  -  total flux cleaned = -0.00171416 Jy
! Component: 950  -  total flux cleaned = -0.00171378 Jy
! Component: 1000  -  total flux cleaned = -0.00174019 Jy
! Component: 1050  -  total flux cleaned = -0.0017525 Jy
! Component: 1100  -  total flux cleaned = -0.00173952 Jy
! Component: 1150  -  total flux cleaned = -0.00171452 Jy
! Component: 1200  -  total flux cleaned = -0.00172697 Jy
! Component: 1250  -  total flux cleaned = -0.0016913 Jy
! Component: 1300  -  total flux cleaned = -0.00170323 Jy
! Component: 1350  -  total flux cleaned = -0.00170326 Jy
! Component: 1400  -  total flux cleaned = -0.00170296 Jy
! Component: 1450  -  total flux cleaned = -0.00168064 Jy
! Component: 1500  -  total flux cleaned = -0.00165901 Jy
! Component: 1550  -  total flux cleaned = -0.00165906 Jy
! Component: 1600  -  total flux cleaned = -0.00166926 Jy
! Component: 1650  -  total flux cleaned = -0.00163823 Jy
! Component: 1700  -  total flux cleaned = -0.00160779 Jy
! Component: 1750  -  total flux cleaned = -0.00155798 Jy
! Component: 1800  -  total flux cleaned = -0.00153868 Jy
! Component: 1850  -  total flux cleaned = -0.00150975 Jy
! Component: 1900  -  total flux cleaned = -0.00144317 Jy
! Component: 1950  -  total flux cleaned = -0.00141523 Jy
! Component: 2000  -  total flux cleaned = -0.00137843 Jy
! Component: 2050  -  total flux cleaned = -0.0013239 Jy
! Component: 2100  -  total flux cleaned = -0.00130581 Jy
! Component: 2150  -  total flux cleaned = -0.0012348 Jy
! Component: 2200  -  total flux cleaned = -0.00119093 Jy
! Component: 2250  -  total flux cleaned = -0.00114761 Jy
! Component: 2300  -  total flux cleaned = -0.00110471 Jy
! Component: 2350  -  total flux cleaned = -0.00107071 Jy
! Component: 2400  -  total flux cleaned = -0.00100367 Jy
! Component: 2450  -  total flux cleaned = -0.000970633 Jy
! Component: 2500  -  total flux cleaned = -0.000954182 Jy
! Component: 2550  -  total flux cleaned = -0.000945962 Jy
! Component: 2600  -  total flux cleaned = -0.000913715 Jy
! Component: 2650  -  total flux cleaned = -0.000897795 Jy
! Component: 2700  -  total flux cleaned = -0.000889874 Jy
! Component: 2750  -  total flux cleaned = -0.00088983 Jy
! Component: 2800  -  total flux cleaned = -0.000874275 Jy
! Component: 2850  -  total flux cleaned = -0.000881991 Jy
! Component: 2900  -  total flux cleaned = -0.000866695 Jy
! Component: 2950  -  total flux cleaned = -0.000881911 Jy
! Component: 3000  -  total flux cleaned = -0.000904403 Jy
! Component: 3050  -  total flux cleaned = -0.000889417 Jy
! Component: 3100  -  total flux cleaned = -0.00091922 Jy
! Component: 3150  -  total flux cleaned = -0.000919265 Jy
! Component: 3200  -  total flux cleaned = -0.00093388 Jy
! Component: 3250  -  total flux cleaned = -0.000933854 Jy
! Component: 3300  -  total flux cleaned = -0.00095563 Jy
! Component: 3350  -  total flux cleaned = -0.000962816 Jy
! Component: 3400  -  total flux cleaned = -0.000969975 Jy
! Component: 3450  -  total flux cleaned = -0.000984136 Jy
! Component: 3500  -  total flux cleaned = -0.000998288 Jy
! Component: 3550  -  total flux cleaned = -0.0010333 Jy
! Component: 3600  -  total flux cleaned = -0.00103332 Jy
! Component: 3650  -  total flux cleaned = -0.00101943 Jy
! Component: 3700  -  total flux cleaned = -0.00104007 Jy
! Component: 3750  -  total flux cleaned = -0.00103326 Jy
! Component: 3800  -  total flux cleaned = -0.00102646 Jy
! Component: 3850  -  total flux cleaned = -0.00102648 Jy
! Component: 3900  -  total flux cleaned = -0.00101976 Jy
! Component: 3950  -  total flux cleaned = -0.00104658 Jy
! Component: 4000  -  total flux cleaned = -0.00101992 Jy
! Component: 4050  -  total flux cleaned = -0.00101328 Jy
! Total flux subtracted in 4096 components = -0.00101328 Jy
! Clean residual min=-0.000476 max=0.000394 Jy/beam
! Clean residual mean=0.000000 rms=0.000114 Jy/beam
! Combined flux in latest and established models = 0.0983665 Jy
keep
! Adding 267 model components to the UV plane model.
! The established model now contains 338 components and 0.0983665 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp177b_uvs/J0635+4333_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.034 x 2.649 at -35.23 degrees (North through East)
! Clean map  min=-0.0014125  max=0.083483 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp177b_uvs/J0635+4333_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0834835 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000111029 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.398984 0.398984 0.797968 1.59594 3.19187 6.38375 12.7675 25.535 51.07
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.083 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  751.909 
quit
! Quitting program
! Log file /d2/scr/pima/bp177b_uvs/J0635+4333_X_uvs.log closed on Sat Mar 22 08:06:42 2014