! Started logfile: /scr/pima/bp177a_uvs/J1316-3025_C_uvs.log on Fri Feb  7 04:28:32 2014
obs /scr/pima/bp177a_uvs/J1316-3025_C_uva.fits
! Reading UV FITS file: /scr/pima/bp177a_uvs/J1316-3025_C_uva.fits
! AN table 1: 21 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.628571 visibilities/baseline/integration-bin.
! Found source: J1316-3025
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1584 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp177a_uvs/J1316-3025_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007541Jy  sigma=29.474960
! Fit after  self-cal, rms=0.744674Jy  sigma=22.119147
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.095 mas, bmaj=45.81 mas, bpa=-14.04 degrees
! Estimated noise=1.48692 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.195374 Jy
! Component: 100  -  total flux cleaned = 0.237999 Jy
! Total flux subtracted in 100 components = 0.237999 Jy
! Clean residual min=-0.008500 max=0.012077 Jy/beam
! Clean residual mean=-0.000071 rms=0.003896 Jy/beam
! Combined flux in latest and established models = 0.237999 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.237999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033895Jy  sigma=0.951225
! Fit after  self-cal, rms=0.033880Jy  sigma=0.950877
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.043 mas, bmaj=38.99 mas, bpa=-13.98 degrees
! Estimated noise=0.641936 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155023 Jy
! Component: 100  -  total flux cleaned = 0.0188032 Jy
! Component: 150  -  total flux cleaned = 0.0202542 Jy
! Component: 200  -  total flux cleaned = 0.0182588 Jy
! Total flux subtracted in 200 components = 0.0182588 Jy
! Clean residual min=-0.002478 max=0.002463 Jy/beam
! Clean residual mean=-0.000085 rms=0.001061 Jy/beam
! Combined flux in latest and established models = 0.256257 Jy
! Performing phase self-cal
! Adding 108 model components to the UV plane model.
! The established model now contains 110 components and 0.256257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024809Jy  sigma=0.706840
! Fit after  self-cal, rms=0.024813Jy  sigma=0.706665
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.043 x 38.99 at -13.98 degrees (North through East)
! Clean map  min=-0.003805  max=0.245 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.98     LA        0.99     OV        0.96     
!   PT        0.90     SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     HN        1.00     LA        1.05     OV        1.03     
!   PT        1.01     SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     HN        0.98     LA        1.01     OV        0.98     
!   PT        1.00     SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        0.99     LA        1.01     OV        0.97     
!   PT        1.04     SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        0.99     LA        1.00     OV        0.96     
!   PT        0.96     SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.05     LA        1.05     OV        0.98     
!   PT        1.04     SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        0.99     LA        0.97     OV        0.97     
!   PT        0.96     SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.03     LA        0.96     OV        1.00     
!   PT        0.94     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.024813Jy  sigma=0.706665
! Fit after  self-cal, rms=0.017733Jy  sigma=0.494630
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.052 mas, bmaj=39.12 mas, bpa=-13.97 degrees
! Estimated noise=0.636804 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000402149 Jy
! Component: 100  -  total flux cleaned = 0.000215711 Jy
! Component: 150  -  total flux cleaned = 0.000429524 Jy
! Component: 200  -  total flux cleaned = 0.000430739 Jy
! Total flux subtracted in 200 components = 0.000430739 Jy
! Clean residual min=-0.000369 max=0.000374 Jy/beam
! Clean residual mean=0.000006 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.256688 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 169 components and 0.256688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017587Jy  sigma=0.489920
! Fit after  self-cal, rms=0.017584Jy  sigma=0.489844
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017584Jy  sigma=0.489844
! Fit after  self-cal, rms=0.017572Jy  sigma=0.489645
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.052 mas, bmaj=39.13 mas, bpa=-13.97 degrees
! Estimated noise=0.636645 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000102372 Jy
! Component: 100  -  total flux cleaned = 0.000115499 Jy
! Component: 150  -  total flux cleaned = 0.000274457 Jy
! Component: 200  -  total flux cleaned = 0.000178293 Jy
! Total flux subtracted in 200 components = 0.000178293 Jy
! Clean residual min=-0.000258 max=0.000256 Jy/beam
! Clean residual mean=0.000003 rms=0.000097 Jy/beam
! Combined flux in latest and established models = 0.256867 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 210 components and 0.256867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017535Jy  sigma=0.488610
! Fit after  self-cal, rms=0.017537Jy  sigma=0.488600
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.29475e-05 Jy
! Component: 100  -  total flux cleaned = -1.5617e-05 Jy
! Component: 150  -  total flux cleaned = -1.58275e-05 Jy
! Component: 200  -  total flux cleaned = 9.52623e-06 Jy
! Total flux subtracted in 200 components = 9.52623e-06 Jy
! Clean residual min=-0.000207 max=0.000207 Jy/beam
! Clean residual mean=0.000001 rms=0.000081 Jy/beam
! Combined flux in latest and established models = 0.256876 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 257 components and 0.256876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017517Jy  sigma=0.488125
! Fit after  self-cal, rms=0.017518Jy  sigma=0.488120
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017518Jy  sigma=0.488120
! Fit after  self-cal, rms=0.017524Jy  sigma=0.487986
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.053 mas, bmaj=39.12 mas, bpa=-13.97 degrees
! Estimated noise=0.636777 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000119333 Jy
! Component: 100  -  total flux cleaned = -0.000185328 Jy
! Component: 150  -  total flux cleaned = -0.000269762 Jy
! Component: 200  -  total flux cleaned = -0.00028115 Jy
! Total flux subtracted in 200 components = -0.00028115 Jy
! Clean residual min=-0.000181 max=0.000185 Jy/beam
! Clean residual mean=0.000000 rms=0.000072 Jy/beam
! Combined flux in latest and established models = 0.256595 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 290 components and 0.256595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017506Jy  sigma=0.487542
! Fit after  self-cal, rms=0.017507Jy  sigma=0.487536
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.85429e-05 Jy
! Component: 100  -  total flux cleaned = 9.88584e-05 Jy
! Component: 150  -  total flux cleaned = 0.000157591 Jy
! Component: 200  -  total flux cleaned = 0.000166995 Jy
! Total flux subtracted in 200 components = 0.000166995 Jy
! Clean residual min=-0.000159 max=0.000159 Jy/beam
! Clean residual mean=0.000001 rms=0.000065 Jy/beam
! Combined flux in latest and established models = 0.256762 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 331 components and 0.256762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017497Jy  sigma=0.487281
! Fit after  self-cal, rms=0.017497Jy  sigma=0.487279
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017497Jy  sigma=0.487279
! Fit after  self-cal, rms=0.017502Jy  sigma=0.487208
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.095 mas, bmaj=37.07 mas, bpa=-13.25 degrees
! Estimated noise=0.669821 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.16213e-05 Jy
! Component: 100  -  total flux cleaned = -0.00010652 Jy
! Component: 150  -  total flux cleaned = -0.000191715 Jy
! Component: 200  -  total flux cleaned = -0.00031408 Jy
! Total flux subtracted in 200 components = -0.00031408 Jy
! Clean residual min=-0.000117 max=0.000117 Jy/beam
! Clean residual mean=-0.000000 rms=0.000045 Jy/beam
! Combined flux in latest and established models = 0.256448 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 366 components and 0.256448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017493Jy  sigma=0.486998
! Fit after  self-cal, rms=0.017494Jy  sigma=0.486995
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.42891e-05 Jy
! Component: 100  -  total flux cleaned = 4.45913e-05 Jy
! Component: 150  -  total flux cleaned = 8.72527e-06 Jy
! Component: 200  -  total flux cleaned = -2.09434e-05 Jy
! Total flux subtracted in 200 components = -2.09434e-05 Jy
! Clean residual min=-0.000099 max=0.000098 Jy/beam
! Clean residual mean=0.000000 rms=0.000040 Jy/beam
! Combined flux in latest and established models = 0.256427 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 414 components and 0.256427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017489Jy  sigma=0.486855
! Fit after  self-cal, rms=0.017490Jy  sigma=0.486852
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.054 mas, bmaj=39.12 mas, bpa=-13.97 degrees
! Estimated noise=0.636865 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.054 x 39.12 at -13.97 degrees (North through East)
! Clean map  min=-0.0017654  max=0.24274 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.101 mas, bmaj=45.89 mas, bpa=-14.03 degrees
! Estimated noise=1.47098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193273 Jy
! Component: 100  -  total flux cleaned = 0.235468 Jy
! Component: 150  -  total flux cleaned = 0.247311 Jy
! Component: 200  -  total flux cleaned = 0.253304 Jy
! Total flux subtracted in 200 components = 0.253304 Jy
! Clean residual min=-0.003419 max=0.003395 Jy/beam
! Clean residual mean=-0.000037 rms=0.001339 Jy/beam
! Combined flux in latest and established models = 0.253304 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 53 model components to the UV plane model.
! The established model now contains 53 components and 0.253304 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.054 mas, bmaj=39.12 mas, bpa=-13.97 degrees
! Estimated noise=0.636865 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275206 Jy
! Component: 100  -  total flux cleaned = 0.00396484 Jy
! Component: 150  -  total flux cleaned = 0.0030828 Jy
! Component: 200  -  total flux cleaned = 0.001863 Jy
! Total flux subtracted in 200 components = 0.001863 Jy
! Clean residual min=-0.001238 max=0.001245 Jy/beam
! Clean residual mean=-0.000037 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.255167 Jy
! Adding 117 model components to the UV plane model.
! The established model now contains 170 components and 0.255167 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.095 mas, bmaj=37.07 mas, bpa=-13.25 degrees
! Estimated noise=0.669821 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000790483 Jy
! Component: 100  -  total flux cleaned = 0.00063553 Jy
! Component: 150  -  total flux cleaned = 8.90259e-05 Jy
! Component: 200  -  total flux cleaned = -0.000525662 Jy
! Total flux subtracted in 200 components = -0.000525662 Jy
! Clean residual min=-0.000535 max=0.000532 Jy/beam
! Clean residual mean=-0.000009 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.254641 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000580748 Jy
! Component: 100  -  total flux cleaned = -0.00117806 Jy
! Component: 150  -  total flux cleaned = -0.00180242 Jy
! Component: 200  -  total flux cleaned = -0.00243726 Jy
! Total flux subtracted in 200 components = -0.00243726 Jy
! Clean residual min=-0.000487 max=0.000483 Jy/beam
! Clean residual mean=-0.000013 rms=0.000180 Jy/beam
! Combined flux in latest and established models = 0.252204 Jy
! Adding 160 model components to the UV plane model.
! The established model now contains 325 components and 0.252204 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.054 mas, bmaj=39.12 mas, bpa=-13.97 degrees
! Estimated noise=0.636865 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000292828 Jy
! Component: 100  -  total flux cleaned = -0.000448767 Jy
! Component: 150  -  total flux cleaned = -0.000567524 Jy
! Component: 200  -  total flux cleaned = -0.000708755 Jy
! Total flux subtracted in 200 components = -0.000708755 Jy
! Clean residual min=-0.000251 max=0.000250 Jy/beam
! Clean residual mean=0.000001 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 0.251495 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 392 components and 0.251495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017527Jy  sigma=0.487961
! Fit after  self-cal, rms=0.017512Jy  sigma=0.487599
wmodel /scr/pima/bp177a_uvs/J1316-3025_C_map.mod
! Writing 392 model components to file: /scr/pima/bp177a_uvs/J1316-3025_C_map.mod
wobs /scr/pima/bp177a_uvs/J1316-3025_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp177a_uvs/J1316-3025_C_uvs.fits
wwins /scr/pima/bp177a_uvs/J1316-3025_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bp177a_uvs/J1316-3025_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.054 x 39.12 at -13.97 degrees (North through East)
! Clean map  min=-0.0016408  max=0.24253 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp177a_uvs/J1316-3025_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.242533 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.60494e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.118808 0.118808 0.237616 0.475232 0.950464 1.90093 3.80185 7.60371 15.2074 30.4148 60.8297
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.242 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2525.08 
quit
! Quitting program
! Log file /scr/pima/bp177a_uvs/J1316-3025_C_uvs.log closed on Fri Feb  7 04:28:37 2014