! Started logfile: /scr/pima/bp177a_uvs/J0809+8702_C_uvs.log on Fri Feb  7 04:25:36 2014
obs /scr/pima/bp177a_uvs/J0809+8702_C_uva.fits
! Reading UV FITS file: /scr/pima/bp177a_uvs/J0809+8702_C_uva.fits
! AN table 1: 5 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.506667 visibilities/baseline/integration-bin.
! Found source: J0809+8702
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 304 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp177a_uvs/J0809+8702_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000196Jy  sigma=40.762752
! Fit after  self-cal, rms=0.990234Jy  sigma=40.290695
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.081 mas, bmaj=15.84 mas, bpa=27.04 degrees
! Estimated noise=1.9464 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00679637 Jy
! Component: 100  -  total flux cleaned = 0.00618487 Jy
! Total flux subtracted in 100 components = 0.00618487 Jy
! Clean residual min=-0.001615 max=0.001589 Jy/beam
! Clean residual mean=-0.000009 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.00618487 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.00618487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014084Jy  sigma=0.535133
! Fit after  self-cal, rms=0.012167Jy  sigma=0.436463
! Inverting map 
! Added new window around map position (-0.9, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00331892 Jy
! Component: 100  -  total flux cleaned = 0.0033512 Jy
! Total flux subtracted in 100 components = 0.0033512 Jy
! Clean residual min=-0.001985 max=0.001566 Jy/beam
! Clean residual mean=-0.000007 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.00953607 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 42 components and 0.00953607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011391Jy  sigma=0.401455
! Fit after  self-cal, rms=0.011414Jy  sigma=0.399996
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.607 mas, bmaj=17.48 mas, bpa=28.1 degrees
! Estimated noise=1.0799 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000260302 Jy
! Component: 100  -  total flux cleaned = -5.10167e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103806 Jy
! Component: 200  -  total flux cleaned = 0.000194158 Jy
! Total flux subtracted in 200 components = 0.000194158 Jy
! Clean residual min=-0.001216 max=0.000980 Jy/beam
! Clean residual mean=-0.000003 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.00973022 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 72 components and 0.00973023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011369Jy  sigma=0.396108
! Fit after  self-cal, rms=0.011332Jy  sigma=0.395241
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.607 x 17.48 at 28.1 degrees (North through East)
! Clean map  min=-0.0014406  max=0.011249 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.011332Jy  sigma=0.395241
! Fit after  self-cal, rms=0.011332Jy  sigma=0.395241
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.607 mas, bmaj=17.48 mas, bpa=28.1 degrees
! Estimated noise=1.0799 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.00099e-05 Jy
! Component: 100  -  total flux cleaned = -5.78367e-05 Jy
! Component: 150  -  total flux cleaned = 1.7089e-05 Jy
! Component: 200  -  total flux cleaned = 6.2564e-05 Jy
! Total flux subtracted in 200 components = 6.2564e-05 Jy
! Clean residual min=-0.001126 max=0.001030 Jy/beam
! Clean residual mean=-0.000002 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.00979279 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 91 components and 0.00979279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011319Jy  sigma=0.393954
! Fit after  self-cal, rms=0.011296Jy  sigma=0.393579
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011296Jy  sigma=0.393579
! Fit after  self-cal, rms=0.011296Jy  sigma=0.393579
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.607 mas, bmaj=17.48 mas, bpa=28.1 degrees
! Estimated noise=1.0799 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.46399e-05 Jy
! Component: 100  -  total flux cleaned = -2.34725e-05 Jy
! Component: 150  -  total flux cleaned = -1.87099e-05 Jy
! Component: 200  -  total flux cleaned = 6.74507e-06 Jy
! Total flux subtracted in 200 components = 6.74507e-06 Jy
! Clean residual min=-0.001067 max=0.001054 Jy/beam
! Clean residual mean=-0.000002 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.00979954 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 106 components and 0.00979954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011290Jy  sigma=0.393032
! Fit after  self-cal, rms=0.011277Jy  sigma=0.392866
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.70817e-05 Jy
! Component: 100  -  total flux cleaned = -2.12287e-05 Jy
! Component: 150  -  total flux cleaned = -1.82829e-05 Jy
! Component: 200  -  total flux cleaned = 1.24036e-06 Jy
! Total flux subtracted in 200 components = 1.24036e-06 Jy
! Clean residual min=-0.001038 max=0.001064 Jy/beam
! Clean residual mean=-0.000001 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.00980078 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 119 components and 0.00980078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011274Jy  sigma=0.392612
! Fit after  self-cal, rms=0.011267Jy  sigma=0.392532
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011267Jy  sigma=0.392532
! Fit after  self-cal, rms=0.011267Jy  sigma=0.392532
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.607 mas, bmaj=17.48 mas, bpa=28.1 degrees
! Estimated noise=1.0799 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.07359e-06 Jy
! Component: 100  -  total flux cleaned = -1.15229e-05 Jy
! Component: 150  -  total flux cleaned = 1.44796e-05 Jy
! Component: 200  -  total flux cleaned = 2.84886e-05 Jy
! Total flux subtracted in 200 components = 2.84886e-05 Jy
! Clean residual min=-0.001028 max=0.001059 Jy/beam
! Clean residual mean=-0.000001 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.00982927 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 131 components and 0.00982927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011264Jy  sigma=0.392391
! Fit after  self-cal, rms=0.011261Jy  sigma=0.392348
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.77083e-06 Jy
! Component: 100  -  total flux cleaned = 6.12153e-06 Jy
! Component: 150  -  total flux cleaned = 2.69171e-05 Jy
! Component: 200  -  total flux cleaned = 3.68037e-05 Jy
! Total flux subtracted in 200 components = 3.68037e-05 Jy
! Clean residual min=-0.001011 max=0.001045 Jy/beam
! Clean residual mean=-0.000001 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.00986607 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 137 components and 0.00986607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011258Jy  sigma=0.392249
! Fit after  self-cal, rms=0.011261Jy  sigma=0.392163
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011261Jy  sigma=0.392163
! Fit after  self-cal, rms=0.011261Jy  sigma=0.392163
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.065 mas, bmaj=18.23 mas, bpa=26.72 degrees
! Estimated noise=1.09811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.4974e-06 Jy
! Component: 100  -  total flux cleaned = 2.01019e-05 Jy
! Component: 150  -  total flux cleaned = 1.60102e-05 Jy
! Component: 200  -  total flux cleaned = 3.24637e-05 Jy
! Total flux subtracted in 200 components = 3.24637e-05 Jy
! Clean residual min=-0.000796 max=0.000819 Jy/beam
! Clean residual mean=-0.000001 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.00989853 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 140 components and 0.00989853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011257Jy  sigma=0.392032
! Fit after  self-cal, rms=0.011262Jy  sigma=0.391957
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.28016e-05 Jy
! Component: 100  -  total flux cleaned = -3.9203e-05 Jy
! Component: 150  -  total flux cleaned = -3.33806e-05 Jy
! Component: 200  -  total flux cleaned = -2.7418e-05 Jy
! Total flux subtracted in 200 components = -2.7418e-05 Jy
! Clean residual min=-0.000759 max=0.000802 Jy/beam
! Clean residual mean=-0.000001 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.00987112 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 143 components and 0.00987112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011258Jy  sigma=0.391886
! Fit after  self-cal, rms=0.011261Jy  sigma=0.391849
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.607 mas, bmaj=17.48 mas, bpa=28.1 degrees
! Estimated noise=1.0799 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.607 x 17.48 at 28.1 degrees (North through East)
! Clean map  min=-0.0015053  max=0.011169 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.081 mas, bmaj=15.84 mas, bpa=27.04 degrees
! Estimated noise=1.9464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00944174 Jy
! Component: 100  -  total flux cleaned = 0.0101872 Jy
! Component: 150  -  total flux cleaned = 0.0104256 Jy
! Component: 200  -  total flux cleaned = 0.0107372 Jy
! Total flux subtracted in 200 components = 0.0107372 Jy
! Clean residual min=-0.001812 max=0.001804 Jy/beam
! Clean residual mean=-0.000004 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.0107372 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 53 model components to the UV plane model.
! The established model now contains 53 components and 0.0107372 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.607 mas, bmaj=17.48 mas, bpa=28.1 degrees
! Estimated noise=1.0799 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.98851e-05 Jy
! Component: 100  -  total flux cleaned = 0.000314815 Jy
! Component: 150  -  total flux cleaned = 0.00051505 Jy
! Component: 200  -  total flux cleaned = 0.000662342 Jy
! Total flux subtracted in 200 components = 0.000662342 Jy
! Clean residual min=-0.001605 max=0.001310 Jy/beam
! Clean residual mean=-0.000004 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0113995 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 77 components and 0.0113995 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.065 mas, bmaj=18.23 mas, bpa=26.72 degrees
! Estimated noise=1.09811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014645 Jy
! Component: 100  -  total flux cleaned = 0.000229499 Jy
! Component: 150  -  total flux cleaned = 0.000291738 Jy
! Component: 200  -  total flux cleaned = 0.000347906 Jy
! Total flux subtracted in 200 components = 0.000347906 Jy
! Clean residual min=-0.001351 max=0.001189 Jy/beam
! Clean residual mean=-0.000006 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0117474 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.12693e-05 Jy
! Component: 100  -  total flux cleaned = 0.000115719 Jy
! Component: 150  -  total flux cleaned = 0.000175177 Jy
! Component: 200  -  total flux cleaned = 0.000230899 Jy
! Total flux subtracted in 200 components = 0.000230899 Jy
! Clean residual min=-0.001291 max=0.001138 Jy/beam
! Clean residual mean=-0.000007 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.0119783 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 106 components and 0.0119783 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.607 mas, bmaj=17.48 mas, bpa=28.1 degrees
! Estimated noise=1.0799 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.16071e-05 Jy
! Component: 100  -  total flux cleaned = 0.000110849 Jy
! Component: 150  -  total flux cleaned = 0.000156507 Jy
! Component: 200  -  total flux cleaned = 0.00019379 Jy
! Total flux subtracted in 200 components = 0.00019379 Jy
! Clean residual min=-0.001300 max=0.001139 Jy/beam
! Clean residual mean=-0.000006 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.0121721 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 122 components and 0.0121721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011354Jy  sigma=0.395979
! Fit after  self-cal, rms=0.011238Jy  sigma=0.394823
wmodel /scr/pima/bp177a_uvs/J0809+8702_C_map.mod
! Writing 122 model components to file: /scr/pima/bp177a_uvs/J0809+8702_C_map.mod
wobs /scr/pima/bp177a_uvs/J0809+8702_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp177a_uvs/J0809+8702_C_uvs.fits
wwins /scr/pima/bp177a_uvs/J0809+8702_C_map.win
! wwins: Wrote 1 windows to /scr/pima/bp177a_uvs/J0809+8702_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000456341 Jy
! Component: 100  -  total flux cleaned = -0.000616152 Jy
! Component: 150  -  total flux cleaned = -0.000660899 Jy
! Component: 200  -  total flux cleaned = -0.000688552 Jy
! Component: 250  -  total flux cleaned = -0.000687994 Jy
! Component: 300  -  total flux cleaned = -0.00070051 Jy
! Component: 350  -  total flux cleaned = -0.000712604 Jy
! Component: 400  -  total flux cleaned = -0.000712479 Jy
! Component: 450  -  total flux cleaned = -0.000712307 Jy
! Component: 500  -  total flux cleaned = -0.000712122 Jy
! Component: 550  -  total flux cleaned = -0.000712201 Jy
! Component: 600  -  total flux cleaned = -0.000723534 Jy
! Component: 650  -  total flux cleaned = -0.000723701 Jy
! Component: 700  -  total flux cleaned = -0.000700602 Jy
! Component: 750  -  total flux cleaned = -0.000676728 Jy
! Component: 800  -  total flux cleaned = -0.000652308 Jy
! Component: 850  -  total flux cleaned = -0.000626989 Jy
! Component: 900  -  total flux cleaned = -0.000614029 Jy
! Component: 950  -  total flux cleaned = -0.00058713 Jy
! Component: 1000  -  total flux cleaned = -0.000573243 Jy
! Component: 1050  -  total flux cleaned = -0.00055892 Jy
! Component: 1100  -  total flux cleaned = -0.000544112 Jy
! Component: 1150  -  total flux cleaned = -0.000528838 Jy
! Component: 1200  -  total flux cleaned = -0.000497289 Jy
! Component: 1250  -  total flux cleaned = -0.000447662 Jy
! Component: 1300  -  total flux cleaned = -0.000429601 Jy
! Component: 1350  -  total flux cleaned = -0.000410927 Jy
! Component: 1400  -  total flux cleaned = -0.000391795 Jy
! Component: 1450  -  total flux cleaned = -0.000392006 Jy
! Component: 1500  -  total flux cleaned = -0.000351566 Jy
! Component: 1550  -  total flux cleaned = -0.000330404 Jy
! Component: 1600  -  total flux cleaned = -0.000308137 Jy
! Component: 1650  -  total flux cleaned = -0.000284484 Jy
! Component: 1700  -  total flux cleaned = -0.000259502 Jy
! Component: 1750  -  total flux cleaned = -0.000259757 Jy
! Component: 1800  -  total flux cleaned = -0.000233896 Jy
! Component: 1850  -  total flux cleaned = -0.000205686 Jy
! Component: 1900  -  total flux cleaned = -0.000176543 Jy
! Component: 1950  -  total flux cleaned = -0.000145165 Jy
! Component: 2000  -  total flux cleaned = -0.000112272 Jy
! Component: 2050  -  total flux cleaned = -7.7764e-05 Jy
! Component: 2100  -  total flux cleaned = -0.000113914 Jy
! Component: 2150  -  total flux cleaned = -0.00015143 Jy
! Component: 2200  -  total flux cleaned = -0.000151037 Jy
! Component: 2250  -  total flux cleaned = -0.000191871 Jy
! Component: 2300  -  total flux cleaned = -0.000279544 Jy
! Component: 2350  -  total flux cleaned = -0.000325667 Jy
! Component: 2400  -  total flux cleaned = -0.000373572 Jy
! Component: 2450  -  total flux cleaned = -0.000424568 Jy
! Component: 2500  -  total flux cleaned = -0.000425174 Jy
! Component: 2550  -  total flux cleaned = -0.000424665 Jy
! Component: 2600  -  total flux cleaned = -0.000541133 Jy
! Component: 2650  -  total flux cleaned = -0.000541259 Jy
! Component: 2700  -  total flux cleaned = -0.000477021 Jy
! Component: 2750  -  total flux cleaned = -0.000544534 Jy
! Component: 2800  -  total flux cleaned = -0.000615772 Jy
! Component: 2850  -  total flux cleaned = -0.000614855 Jy
! Component: 2900  -  total flux cleaned = -0.000774769 Jy
! Component: 2950  -  total flux cleaned = -0.000774935 Jy
! Component: 3000  -  total flux cleaned = -0.00077484 Jy
! Component: 3050  -  total flux cleaned = -0.000866047 Jy
! Component: 3100  -  total flux cleaned = -0.00096145 Jy
! Component: 3150  -  total flux cleaned = -0.00096172 Jy
! Component: 3200  -  total flux cleaned = -0.00106809 Jy
! Component: 3250  -  total flux cleaned = -0.00118035 Jy
! Component: 3300  -  total flux cleaned = -0.00117915 Jy
! Component: 3350  -  total flux cleaned = -0.00130083 Jy
! Component: 3400  -  total flux cleaned = -0.00129999 Jy
! Component: 3450  -  total flux cleaned = -0.00143372 Jy
! Component: 3500  -  total flux cleaned = -0.00157857 Jy
! Component: 3550  -  total flux cleaned = -0.00158221 Jy
! Component: 3600  -  total flux cleaned = -0.00158348 Jy
! Component: 3650  -  total flux cleaned = -0.00157828 Jy
! Component: 3700  -  total flux cleaned = -0.00174806 Jy
! Component: 3750  -  total flux cleaned = -0.00193311 Jy
! Component: 3800  -  total flux cleaned = -0.00193754 Jy
! Component: 3850  -  total flux cleaned = -0.00214156 Jy
! Component: 3900  -  total flux cleaned = -0.00214552 Jy
! Component: 3950  -  total flux cleaned = -0.00214389 Jy
! Component: 4000  -  total flux cleaned = -0.00213407 Jy
! Component: 4050  -  total flux cleaned = -0.00212932 Jy
! Total flux subtracted in 4096 components = -0.00237608 Jy
! Clean residual min=-0.014073 max=0.013357 Jy/beam
! Clean residual mean=0.000125 rms=0.004226 Jy/beam
! Combined flux in latest and established models = 0.00979606 Jy
keep
! Adding 94 model components to the UV plane model.
! The established model now contains 216 components and 0.00979606 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp177a_uvs/J0809+8702_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.607 x 17.48 at 28.1 degrees (North through East)
! Clean map  min=-0.029978  max=0.025286 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp177a_uvs/J0809+8702_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0252861 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00443391 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -52.605 52.605
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0133 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.025 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  5.702 
quit
! Quitting program
! Log file /scr/pima/bp177a_uvs/J0809+8702_C_uvs.log closed on Fri Feb  7 04:25:40 2014