! Started logfile: /scr/pima/bp177a_uvs/J0735+1808_X_uvs.log on Fri Feb  7 04:24:59 2014
obs /scr/pima/bp177a_uvs/J0735+1808_X_uva.fits
! Reading UV FITS file: /scr/pima/bp177a_uvs/J0735+1808_X_uva.fits
! AN table 1: 3 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.6 visibilities/baseline/integration-bin.
! Found source: J0735+1808
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 216 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp177a_uvs/J0735+1808_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999599Jy  sigma=38.541874
! Fit after  self-cal, rms=0.987239Jy  sigma=38.245881
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.051 mas, bmaj=13.47 mas, bpa=15.87 degrees
! Estimated noise=1.76842 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103408 Jy
! Component: 100  -  total flux cleaned = 0.0106184 Jy
! Total flux subtracted in 100 components = 0.0106184 Jy
! Clean residual min=-0.001758 max=0.001753 Jy/beam
! Clean residual mean=0.000000 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.0106184 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0106184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014967Jy  sigma=0.554861
! Fit after  self-cal, rms=0.012787Jy  sigma=0.469618
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.272 mas, bmaj=12.52 mas, bpa=16.03 degrees
! Estimated noise=1.33598 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247692 Jy
! Component: 100  -  total flux cleaned = 0.00211971 Jy
! Component: 150  -  total flux cleaned = 0.00204452 Jy
! Component: 200  -  total flux cleaned = 0.00193736 Jy
! Total flux subtracted in 200 components = 0.00193736 Jy
! Clean residual min=-0.000844 max=0.000842 Jy/beam
! Clean residual mean=-0.000002 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.0125558 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 73 components and 0.0125558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011664Jy  sigma=0.431368
! Fit after  self-cal, rms=0.011577Jy  sigma=0.429509
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.272 x 12.52 at 16.03 degrees (North through East)
! Clean map  min=-0.0019274  max=0.010775 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.011577Jy  sigma=0.429509
! Fit after  self-cal, rms=0.011577Jy  sigma=0.429509
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.272 mas, bmaj=12.52 mas, bpa=16.03 degrees
! Estimated noise=1.33598 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110221 Jy
! Component: 100  -  total flux cleaned = -0.00153025 Jy
! Component: 150  -  total flux cleaned = -0.00185011 Jy
! Component: 200  -  total flux cleaned = -0.00211906 Jy
! Total flux subtracted in 200 components = -0.00211906 Jy
! Clean residual min=-0.000486 max=0.000487 Jy/beam
! Clean residual mean=0.000000 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.0104367 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 113 components and 0.0104367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011401Jy  sigma=0.423061
! Fit after  self-cal, rms=0.011372Jy  sigma=0.422335
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011372Jy  sigma=0.422335
! Fit after  self-cal, rms=0.011372Jy  sigma=0.422335
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.272 mas, bmaj=12.52 mas, bpa=16.03 degrees
! Estimated noise=1.33598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000254661 Jy
! Component: 100  -  total flux cleaned = -0.000493523 Jy
! Component: 150  -  total flux cleaned = -0.000529992 Jy
! Component: 200  -  total flux cleaned = -0.000564581 Jy
! Total flux subtracted in 200 components = -0.000564581 Jy
! Clean residual min=-0.000278 max=0.000276 Jy/beam
! Clean residual mean=0.000000 rms=0.000091 Jy/beam
! Combined flux in latest and established models = 0.00987216 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 150 components and 0.00987216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011312Jy  sigma=0.420335
! Fit after  self-cal, rms=0.011302Jy  sigma=0.420178
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.62801e-05 Jy
! Component: 100  -  total flux cleaned = 3.94824e-06 Jy
! Component: 150  -  total flux cleaned = -2.0291e-05 Jy
! Component: 200  -  total flux cleaned = -5.53746e-05 Jy
! Total flux subtracted in 200 components = -5.53746e-05 Jy
! Clean residual min=-0.000192 max=0.000194 Jy/beam
! Clean residual mean=0.000000 rms=0.000067 Jy/beam
! Combined flux in latest and established models = 0.00981679 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 198 components and 0.00981679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011277Jy  sigma=0.419290
! Fit after  self-cal, rms=0.011274Jy  sigma=0.419239
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011274Jy  sigma=0.419239
! Fit after  self-cal, rms=0.011278Jy  sigma=0.417268
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.257 mas, bmaj=12.55 mas, bpa=15.99 degrees
! Estimated noise=1.33224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000284885 Jy
! Component: 100  -  total flux cleaned = -0.000287332 Jy
! Component: 150  -  total flux cleaned = -0.000253625 Jy
! Component: 200  -  total flux cleaned = -0.000253807 Jy
! Total flux subtracted in 200 components = -0.000253807 Jy
! Clean residual min=-0.000170 max=0.000168 Jy/beam
! Clean residual mean=0.000000 rms=0.000060 Jy/beam
! Combined flux in latest and established models = 0.00956298 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 244 components and 0.00956298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011248Jy  sigma=0.416417
! Fit after  self-cal, rms=0.011249Jy  sigma=0.416300
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.30208e-05 Jy
! Component: 100  -  total flux cleaned = 0.000119067 Jy
! Component: 150  -  total flux cleaned = 0.000145132 Jy
! Component: 200  -  total flux cleaned = 0.000145454 Jy
! Total flux subtracted in 200 components = 0.000145454 Jy
! Clean residual min=-0.000134 max=0.000133 Jy/beam
! Clean residual mean=0.000000 rms=0.000048 Jy/beam
! Combined flux in latest and established models = 0.00970843 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 282 components and 0.00970843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011235Jy  sigma=0.415866
! Fit after  self-cal, rms=0.011234Jy  sigma=0.415837
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011234Jy  sigma=0.415837
! Fit after  self-cal, rms=0.011270Jy  sigma=0.415635
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.771 mas, bmaj=11.62 mas, bpa=19.62 degrees
! Estimated noise=1.49147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.85281e-05 Jy
! Component: 100  -  total flux cleaned = 0.000156246 Jy
! Component: 150  -  total flux cleaned = 0.000247414 Jy
! Component: 200  -  total flux cleaned = 0.000337404 Jy
! Total flux subtracted in 200 components = 0.000337404 Jy
! Clean residual min=-0.000116 max=0.000114 Jy/beam
! Clean residual mean=0.000001 rms=0.000045 Jy/beam
! Combined flux in latest and established models = 0.0100458 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 325 components and 0.0100458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011260Jy  sigma=0.415371
! Fit after  self-cal, rms=0.011261Jy  sigma=0.415332
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.26518e-05 Jy
! Component: 100  -  total flux cleaned = 0.000146642 Jy
! Component: 150  -  total flux cleaned = 0.000235791 Jy
! Component: 200  -  total flux cleaned = 0.000318731 Jy
! Total flux subtracted in 200 components = 0.000318731 Jy
! Clean residual min=-0.000117 max=0.000116 Jy/beam
! Clean residual mean=0.000001 rms=0.000045 Jy/beam
! Combined flux in latest and established models = 0.0103646 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 386 components and 0.0103646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011255Jy  sigma=0.415054
! Fit after  self-cal, rms=0.011255Jy  sigma=0.415024
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.252 mas, bmaj=12.57 mas, bpa=15.98 degrees
! Estimated noise=1.32958 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.252 x 12.57 at 15.98 degrees (North through East)
! Clean map  min=-0.0016209  max=0.010342 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=13.53 mas, bpa=15.84 degrees
! Estimated noise=1.76203 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109227 Jy
! Component: 100  -  total flux cleaned = 0.0114204 Jy
! Component: 150  -  total flux cleaned = 0.0114264 Jy
! Component: 200  -  total flux cleaned = 0.0108235 Jy
! Total flux subtracted in 200 components = 0.0108235 Jy
! Clean residual min=-0.001311 max=0.001314 Jy/beam
! Clean residual mean=-0.000001 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.0108235 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 42 model components to the UV plane model.
! The established model now contains 42 components and 0.0108235 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.252 mas, bmaj=12.57 mas, bpa=15.98 degrees
! Estimated noise=1.32958 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000213493 Jy
! Component: 100  -  total flux cleaned = -0.000474383 Jy
! Component: 150  -  total flux cleaned = -0.0005224 Jy
! Component: 200  -  total flux cleaned = -0.000605678 Jy
! Total flux subtracted in 200 components = -0.000605678 Jy
! Clean residual min=-0.000652 max=0.000655 Jy/beam
! Clean residual mean=-0.000002 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.0102178 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 84 components and 0.0102178 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.771 mas, bmaj=11.62 mas, bpa=19.62 degrees
! Estimated noise=1.49147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000545709 Jy
! Component: 100  -  total flux cleaned = 0.000567893 Jy
! Component: 150  -  total flux cleaned = 0.000606318 Jy
! Component: 200  -  total flux cleaned = 0.000682825 Jy
! Total flux subtracted in 200 components = 0.000682825 Jy
! Clean residual min=-0.000319 max=0.000324 Jy/beam
! Clean residual mean=0.000000 rms=0.000119 Jy/beam
! Combined flux in latest and established models = 0.0109006 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137098 Jy
! Component: 100  -  total flux cleaned = 0.00032095 Jy
! Component: 150  -  total flux cleaned = 0.00047132 Jy
! Component: 200  -  total flux cleaned = 0.00067652 Jy
! Total flux subtracted in 200 components = 0.00067652 Jy
! Clean residual min=-0.000390 max=0.000391 Jy/beam
! Clean residual mean=0.000000 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.0115772 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 163 components and 0.0115772 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.252 mas, bmaj=12.57 mas, bpa=15.98 degrees
! Estimated noise=1.32958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000178064 Jy
! Component: 100  -  total flux cleaned = -0.000245011 Jy
! Component: 150  -  total flux cleaned = -0.000243865 Jy
! Component: 200  -  total flux cleaned = -0.000310418 Jy
! Total flux subtracted in 200 components = -0.000310418 Jy
! Clean residual min=-0.000216 max=0.000216 Jy/beam
! Clean residual mean=0.000000 rms=0.000076 Jy/beam
! Combined flux in latest and established models = 0.0112667 Jy
selfcal
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 217 components and 0.0112668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011268Jy  sigma=0.416223
! Fit after  self-cal, rms=0.011259Jy  sigma=0.415909
wmodel /scr/pima/bp177a_uvs/J0735+1808_X_map.mod
! Writing 217 model components to file: /scr/pima/bp177a_uvs/J0735+1808_X_map.mod
wobs /scr/pima/bp177a_uvs/J0735+1808_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp177a_uvs/J0735+1808_X_uvs.fits
wwins /scr/pima/bp177a_uvs/J0735+1808_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bp177a_uvs/J0735+1808_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.252 x 12.57 at 15.98 degrees (North through East)
! Clean map  min=-0.0016059  max=0.010128 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp177a_uvs/J0735+1808_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0101282 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 6.7835e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.00929 2.00929 4.01858 8.03717 16.0743 32.1487 64.2974
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.01 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  149.306 
quit
! Quitting program
! Log file /scr/pima/bp177a_uvs/J0735+1808_X_uvs.log closed on Fri Feb  7 04:25:02 2014