! Started logfile: /scr/pima/bp171ae_uvs/J1748-2907_C_uvs.log on Fri Oct 11 18:52:23 2013
obs /scr/pima/bp171ae_uvs/J1748-2907_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171ae_uvs/J1748-2907_C_uva.fits
! AN table 1: 9 integrations on 10 of 10 possible baselines.
! AN table 2: 9 integrations on 3 of 3 possible baselines.
! Apparent sampling: 0.692308 visibilities/baseline/integration-bin.
! Found source: J1748-2907
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 648 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171ae_uvs/J1748-2907_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.004601Jy  sigma=2.160553
! Fit after  self-cal, rms=0.954187Jy  sigma=1.970040
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.57 mas, bmaj=32.53 mas, bpa=-26.38 degrees
! Estimated noise=23.4721 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0414305 Jy
! Component: 100  -  total flux cleaned = 0.0411277 Jy
! Total flux subtracted in 100 components = 0.0411277 Jy
! Clean residual min=-0.008582 max=0.008418 Jy/beam
! Clean residual mean=-0.000141 rms=0.005114 Jy/beam
! Combined flux in latest and established models = 0.0411277 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 61 components and 0.0411277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032602Jy  sigma=0.090878
! Fit after  self-cal, rms=0.029553Jy  sigma=0.086403
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.07 mas, bmaj=37.02 mas, bpa=-24.05 degrees
! Estimated noise=15.8081 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00813175 Jy
! Component: 100  -  total flux cleaned = 0.00668575 Jy
! Component: 150  -  total flux cleaned = 0.00578513 Jy
! Component: 200  -  total flux cleaned = 0.00276416 Jy
! Total flux subtracted in 200 components = 0.00276416 Jy
! Clean residual min=-0.003217 max=0.003218 Jy/beam
! Clean residual mean=-0.000060 rms=0.001733 Jy/beam
! Combined flux in latest and established models = 0.0438919 Jy
! Performing phase self-cal
! Adding 90 model components to the UV plane model.
! The established model now contains 151 components and 0.0438919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022237Jy  sigma=0.033993
! Fit after  self-cal, rms=0.022191Jy  sigma=0.033939
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.38     KP        1.12     LA        1.08     OV        0.87     
!   PT        0.81     
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     KP        1.19     LA        1.11     OV        0.88     
!   PT        0.96     
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.65     KP        0.83     LA        1.12     OV        0.81     
!   PT        0.92     
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     KP        1.31     LA        1.15     OV        0.79     
!   PT        1.01     
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.47     KP        1.01     LA        0.99     OV        1.07     
!   PT        0.92     
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     KP        1.17     LA        1.06     OV        0.77     
!   PT        0.97     
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     KP        1.01     LA        1.09     OV        0.99     
!   PT        0.87     
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.52     KP        1.04     LA        1.05     OV        1.05     
!   PT        0.85     
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Fit before self-cal, rms=0.022191Jy  sigma=0.033939
! Fit after  self-cal, rms=0.020452Jy  sigma=0.023301
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.41 mas, bmaj=26.64 mas, bpa=-26.39 degrees
! Estimated noise=23.0748 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0022807 Jy
! Component: 100  -  total flux cleaned = -0.00287782 Jy
! Component: 150  -  total flux cleaned = -0.00358745 Jy
! Component: 200  -  total flux cleaned = -0.00415875 Jy
! Total flux subtracted in 200 components = -0.00415875 Jy
! Clean residual min=-0.000645 max=0.000630 Jy/beam
! Clean residual mean=-0.000002 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.0397332 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 218 components and 0.0397331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018971Jy  sigma=0.023371
! Fit after  self-cal, rms=0.019087Jy  sigma=0.023249
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019087Jy  sigma=0.023249
! Fit after  self-cal, rms=0.018569Jy  sigma=0.022886
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.39 mas, bmaj=26 mas, bpa=-26.61 degrees
! Estimated noise=22.1408 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00175976 Jy
! Component: 100  -  total flux cleaned = -0.00191648 Jy
! Component: 150  -  total flux cleaned = -0.00187058 Jy
! Component: 200  -  total flux cleaned = -0.00230826 Jy
! Total flux subtracted in 200 components = -0.00230826 Jy
! Clean residual min=-0.000379 max=0.000373 Jy/beam
! Clean residual mean=-0.000002 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.0374249 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 273 components and 0.0374249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017530Jy  sigma=0.023125
! Fit after  self-cal, rms=0.017544Jy  sigma=0.023115
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.55616e-05 Jy
! Component: 100  -  total flux cleaned = -0.000335 Jy
! Component: 150  -  total flux cleaned = -0.000634092 Jy
! Component: 200  -  total flux cleaned = -0.000864707 Jy
! Total flux subtracted in 200 components = -0.000864707 Jy
! Clean residual min=-0.000264 max=0.000264 Jy/beam
! Clean residual mean=-0.000000 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.0365602 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 345 components and 0.0365602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017346Jy  sigma=0.023141
! Fit after  self-cal, rms=0.017349Jy  sigma=0.023136
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017349Jy  sigma=0.023136
! Fit after  self-cal, rms=0.016789Jy  sigma=0.022777
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.3 mas, bmaj=25.51 mas, bpa=-26.91 degrees
! Estimated noise=21.0797 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00124673 Jy
! Component: 100  -  total flux cleaned = -0.00121635 Jy
! Component: 150  -  total flux cleaned = -0.00110638 Jy
! Component: 200  -  total flux cleaned = -0.00115071 Jy
! Total flux subtracted in 200 components = -0.00115071 Jy
! Clean residual min=-0.000242 max=0.000242 Jy/beam
! Clean residual mean=-0.000003 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.0354095 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 403 components and 0.0354095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016060Jy  sigma=0.023039
! Fit after  self-cal, rms=0.016062Jy  sigma=0.023031
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.43703e-07 Jy
! Component: 100  -  total flux cleaned = -0.000177926 Jy
! Component: 150  -  total flux cleaned = -0.000332662 Jy
! Component: 200  -  total flux cleaned = -0.000409283 Jy
! Total flux subtracted in 200 components = -0.000409283 Jy
! Clean residual min=-0.000183 max=0.000183 Jy/beam
! Clean residual mean=-0.000001 rms=0.000077 Jy/beam
! Combined flux in latest and established models = 0.0350002 Jy
! Performing phase self-cal
! Adding 93 model components to the UV plane model.
! The established model now contains 488 components and 0.0350002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015985Jy  sigma=0.023056
! Fit after  self-cal, rms=0.015982Jy  sigma=0.023050
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015982Jy  sigma=0.023050
! Fit after  self-cal, rms=0.015469Jy  sigma=0.022716
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.28 mas, bmaj=25.12 mas, bpa=-27.02 degrees
! Estimated noise=19.8769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012366 Jy
! Component: 100  -  total flux cleaned = -0.00150033 Jy
! Component: 150  -  total flux cleaned = -0.00175138 Jy
! Component: 200  -  total flux cleaned = -0.00189115 Jy
! Total flux subtracted in 200 components = -0.00189115 Jy
! Clean residual min=-0.000202 max=0.000203 Jy/beam
! Clean residual mean=-0.000003 rms=0.000079 Jy/beam
! Combined flux in latest and established models = 0.033109 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 534 components and 0.033109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014867Jy  sigma=0.022976
! Fit after  self-cal, rms=0.014868Jy  sigma=0.022970
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000164308 Jy
! Component: 100  -  total flux cleaned = -0.000287896 Jy
! Component: 150  -  total flux cleaned = -0.000424448 Jy
! Component: 200  -  total flux cleaned = -0.000532517 Jy
! Total flux subtracted in 200 components = -0.000532517 Jy
! Clean residual min=-0.000149 max=0.000149 Jy/beam
! Clean residual mean=-0.000001 rms=0.000062 Jy/beam
! Combined flux in latest and established models = 0.0325765 Jy
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 597 components and 0.0325765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014817Jy  sigma=0.022994
! Fit after  self-cal, rms=0.014813Jy  sigma=0.022988
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=14.18 mas, bmaj=25.05 mas, bpa=-27.3 degrees
! Estimated noise=20.0338 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.18 x 25.05 at -27.3 degrees (North through East)
! Clean map  min=-0.0051143  max=0.036278 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.42 mas, bmaj=25 mas, bpa=-33.02 degrees
! Estimated noise=25.6104 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0359677 Jy
! Component: 100  -  total flux cleaned = 0.027213 Jy
! Component: 150  -  total flux cleaned = 0.0199291 Jy
! Component: 200  -  total flux cleaned = 0.00897739 Jy
! Total flux subtracted in 200 components = 0.00897739 Jy
! Clean residual min=-0.007266 max=0.006992 Jy/beam
! Clean residual mean=-0.000093 rms=0.003484 Jy/beam
! Combined flux in latest and established models = 0.00897739 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 114 model components to the UV plane model.
! The established model now contains 114 components and 0.00897739 Jy
! Inverting map and beam 
! Estimated beam: bmin=14.18 mas, bmaj=25.05 mas, bpa=-27.3 degrees
! Estimated noise=20.0338 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00499781 Jy
! Component: 100  -  total flux cleaned = 0.00586129 Jy
! Component: 150  -  total flux cleaned = 0.0059977 Jy
! Component: 200  -  total flux cleaned = 0.0057632 Jy
! Total flux subtracted in 200 components = 0.0057632 Jy
! Clean residual min=-0.001793 max=0.001771 Jy/beam
! Clean residual mean=-0.000011 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.0147406 Jy
! Adding 87 model components to the UV plane model.
! The established model now contains 201 components and 0.0147406 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.28 mas, bmaj=25.12 mas, bpa=-27.02 degrees
! Estimated noise=19.8769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000882488 Jy
! Component: 100  -  total flux cleaned = 0.00138116 Jy
! Component: 150  -  total flux cleaned = 0.00199504 Jy
! Component: 200  -  total flux cleaned = 0.00260029 Jy
! Total flux subtracted in 200 components = 0.00260029 Jy
! Clean residual min=-0.001119 max=0.001113 Jy/beam
! Clean residual mean=0.000017 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.0173409 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000744562 Jy
! Component: 100  -  total flux cleaned = 0.00136735 Jy
! Component: 150  -  total flux cleaned = 0.00222911 Jy
! Component: 200  -  total flux cleaned = 0.0032945 Jy
! Total flux subtracted in 200 components = 0.0032945 Jy
! Clean residual min=-0.001292 max=0.001309 Jy/beam
! Clean residual mean=0.000021 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.0206354 Jy
! Adding 154 model components to the UV plane model.
! The established model now contains 344 components and 0.0206354 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=14.18 mas, bmaj=25.05 mas, bpa=-27.3 degrees
! Estimated noise=20.0338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000965227 Jy
! Component: 100  -  total flux cleaned = 0.00070158 Jy
! Component: 150  -  total flux cleaned = 0.000604996 Jy
! Component: 200  -  total flux cleaned = 0.00060501 Jy
! Total flux subtracted in 200 components = 0.00060501 Jy
! Clean residual min=-0.000470 max=0.000469 Jy/beam
! Clean residual mean=0.000007 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0212404 Jy
selfcal
! Performing phase self-cal
! Adding 94 model components to the UV plane model.
! The established model now contains 434 components and 0.0212404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015299Jy  sigma=0.023983
! Fit after  self-cal, rms=0.015277Jy  sigma=0.023943
wmodel /scr/pima/bp171ae_uvs/J1748-2907_C_map.mod
! Writing 434 model components to file: /scr/pima/bp171ae_uvs/J1748-2907_C_map.mod
wobs /scr/pima/bp171ae_uvs/J1748-2907_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171ae_uvs/J1748-2907_C_uvs.fits
wwins /scr/pima/bp171ae_uvs/J1748-2907_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bp171ae_uvs/J1748-2907_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.18 x 25.05 at -27.3 degrees (North through East)
! Clean map  min=-0.0096955  max=0.028389 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171ae_uvs/J1748-2907_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0283886 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000202964 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.14485 2.14485 4.2897 8.57939 17.1588 34.3176 68.6351
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.028 
quit
! Quitting program
! Log file /scr/pima/bp171ae_uvs/J1748-2907_C_uvs.log closed on Fri Oct 11 18:52:26 2013