! Started logfile: /d2/scr/pima/bp171ab_uvs/J1254+2737_C_uvs.log on Mon Dec  9 01:43:56 2013
obs /d2/scr/pima/bp171ab_uvs/J1254+2737_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171ab_uvs/J1254+2737_C_uva.fits
! AN table 1: 6 integrations on 1 of 1 possible baselines.
! AN table 2: 6 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.770833 visibilities/baseline/integration-bin.
! Found source: J1254+2737
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 592 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171ab_uvs/J1254+2737_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.999803Jy  sigma=0.876046
! Fit after  self-cal, rms=0.991222Jy  sigma=0.864886
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.348 mas, bmaj=9.959 mas, bpa=-18.62 degrees
! Estimated noise=47.9315 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00920513 Jy
! Component: 100  -  total flux cleaned = 0.0102809 Jy
! Total flux subtracted in 100 components = 0.0102809 Jy
! Clean residual min=-0.001765 max=0.001795 Jy/beam
! Clean residual mean=-0.000001 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.0102809 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0102809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015985Jy  sigma=0.015050
! Fit after  self-cal, rms=0.013594Jy  sigma=0.013005
! Inverting map 
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00410856 Jy
! Component: 100  -  total flux cleaned = 0.00512509 Jy
! Total flux subtracted in 100 components = 0.00512509 Jy
! Clean residual min=-0.001566 max=0.001458 Jy/beam
! Clean residual mean=-0.000000 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.015406 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 25 components and 0.015406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013611Jy  sigma=0.011335
! Fit after  self-cal, rms=0.013578Jy  sigma=0.011313
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.153 mas, bmaj=10.6 mas, bpa=-18.99 degrees
! Estimated noise=38.7016 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00055671 Jy
! Component: 100  -  total flux cleaned = 0.000764289 Jy
! Component: 150  -  total flux cleaned = 0.000927965 Jy
! Component: 200  -  total flux cleaned = 0.00100982 Jy
! Total flux subtracted in 200 components = 0.00100982 Jy
! Clean residual min=-0.001443 max=0.001525 Jy/beam
! Clean residual mean=0.000001 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.0164158 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 40 components and 0.0164158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013628Jy  sigma=0.011204
! Fit after  self-cal, rms=0.013624Jy  sigma=0.011198
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.153 x 10.6 at -18.99 degrees (North through East)
! Clean map  min=-0.001381  max=0.013863 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    MK        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    MK        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    MK        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    MK        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    MK        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    MK        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    MK        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    MK        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.013624Jy  sigma=0.011198
! Fit after  self-cal, rms=0.013256Jy  sigma=0.011062
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.093 mas, bmaj=10.71 mas, bpa=-19.78 degrees
! Estimated noise=39.1288 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000308231 Jy
! Component: 100  -  total flux cleaned = -0.000397982 Jy
! Component: 150  -  total flux cleaned = -0.000409613 Jy
! Component: 200  -  total flux cleaned = -0.000419135 Jy
! Total flux subtracted in 200 components = -0.000419135 Jy
! Clean residual min=-0.001586 max=0.001501 Jy/beam
! Clean residual mean=0.000002 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0159967 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 61 components and 0.0159967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013195Jy  sigma=0.011063
! Fit after  self-cal, rms=0.013197Jy  sigma=0.011060
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013197Jy  sigma=0.011060
! Fit after  self-cal, rms=0.013197Jy  sigma=0.011060
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.093 mas, bmaj=10.71 mas, bpa=-19.78 degrees
! Estimated noise=39.1288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.18311e-06 Jy
! Component: 100  -  total flux cleaned = -1.18628e-05 Jy
! Component: 150  -  total flux cleaned = -4.19771e-06 Jy
! Component: 200  -  total flux cleaned = 2.00237e-06 Jy
! Total flux subtracted in 200 components = 2.00237e-06 Jy
! Clean residual min=-0.001580 max=0.001465 Jy/beam
! Clean residual mean=0.000002 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.0159987 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 77 components and 0.0159987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013182Jy  sigma=0.011053
! Fit after  self-cal, rms=0.013185Jy  sigma=0.011051
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.18672e-06 Jy
! Component: 100  -  total flux cleaned = -9.87263e-06 Jy
! Component: 150  -  total flux cleaned = -1.58938e-05 Jy
! Component: 200  -  total flux cleaned = -4.46718e-06 Jy
! Total flux subtracted in 200 components = -4.46718e-06 Jy
! Clean residual min=-0.001570 max=0.001466 Jy/beam
! Clean residual mean=0.000002 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.0159943 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 87 components and 0.0159942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013176Jy  sigma=0.011045
! Fit after  self-cal, rms=0.013178Jy  sigma=0.011044
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013178Jy  sigma=0.011044
! Fit after  self-cal, rms=0.013178Jy  sigma=0.011044
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.093 mas, bmaj=10.71 mas, bpa=-19.78 degrees
! Estimated noise=39.1288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.33525e-07 Jy
! Component: 100  -  total flux cleaned = -1.21584e-05 Jy
! Component: 150  -  total flux cleaned = -2.32871e-05 Jy
! Component: 200  -  total flux cleaned = -1.27893e-05 Jy
! Total flux subtracted in 200 components = -1.27893e-05 Jy
! Clean residual min=-0.001560 max=0.001464 Jy/beam
! Clean residual mean=0.000002 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.0159815 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 95 components and 0.0159815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013170Jy  sigma=0.011041
! Fit after  self-cal, rms=0.013171Jy  sigma=0.011040
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.59264e-06 Jy
! Component: 100  -  total flux cleaned = -7.52161e-06 Jy
! Component: 150  -  total flux cleaned = -1.27504e-05 Jy
! Component: 200  -  total flux cleaned = -7.88125e-06 Jy
! Total flux subtracted in 200 components = -7.88125e-06 Jy
! Clean residual min=-0.001552 max=0.001461 Jy/beam
! Clean residual mean=0.000002 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.0159736 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 107 components and 0.0159736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013163Jy  sigma=0.011038
! Fit after  self-cal, rms=0.013165Jy  sigma=0.011037
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013165Jy  sigma=0.011037
! Fit after  self-cal, rms=0.013165Jy  sigma=0.011037
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.817 mas, bmaj=10.53 mas, bpa=-17.24 degrees
! Estimated noise=39.5715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.10492e-05 Jy
! Component: 100  -  total flux cleaned = -9.09591e-05 Jy
! Component: 150  -  total flux cleaned = -8.09904e-05 Jy
! Component: 200  -  total flux cleaned = -6.23808e-05 Jy
! Total flux subtracted in 200 components = -6.23808e-05 Jy
! Clean residual min=-0.001517 max=0.001457 Jy/beam
! Clean residual mean=0.000002 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.0159112 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 115 components and 0.0159112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013152Jy  sigma=0.011041
! Fit after  self-cal, rms=0.013152Jy  sigma=0.011040
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.12368e-05 Jy
! Component: 100  -  total flux cleaned = -3.12929e-05 Jy
! Component: 150  -  total flux cleaned = -1.75897e-05 Jy
! Component: 200  -  total flux cleaned = -8.88359e-06 Jy
! Total flux subtracted in 200 components = -8.88359e-06 Jy
! Clean residual min=-0.001508 max=0.001451 Jy/beam
! Clean residual mean=0.000002 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.0159023 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 122 components and 0.0159023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013145Jy  sigma=0.011039
! Fit after  self-cal, rms=0.013146Jy  sigma=0.011038
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.093 mas, bmaj=10.71 mas, bpa=-19.78 degrees
! Estimated noise=39.1288 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.093 x 10.71 at -19.78 degrees (North through East)
! Clean map  min=-0.0015132  max=0.01344 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.355 mas, bmaj=9.977 mas, bpa=-18.69 degrees
! Estimated noise=49.1464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117594 Jy
! Component: 100  -  total flux cleaned = 0.0146071 Jy
! Component: 150  -  total flux cleaned = 0.0154595 Jy
! Component: 200  -  total flux cleaned = 0.0156309 Jy
! Total flux subtracted in 200 components = 0.0156309 Jy
! Clean residual min=-0.001837 max=0.001957 Jy/beam
! Clean residual mean=0.000000 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.0156309 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0156309 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.093 mas, bmaj=10.71 mas, bpa=-19.78 degrees
! Estimated noise=39.1288 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000208574 Jy
! Component: 100  -  total flux cleaned = 0.000259983 Jy
! Component: 150  -  total flux cleaned = 0.000319945 Jy
! Component: 200  -  total flux cleaned = 0.000386048 Jy
! Total flux subtracted in 200 components = 0.000386048 Jy
! Clean residual min=-0.001611 max=0.001650 Jy/beam
! Clean residual mean=0.000001 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.0160169 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 37 components and 0.0160169 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.817 mas, bmaj=10.53 mas, bpa=-17.24 degrees
! Estimated noise=39.5715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109661 Jy
! Component: 100  -  total flux cleaned = 0.000128318 Jy
! Component: 150  -  total flux cleaned = 0.00015475 Jy
! Component: 200  -  total flux cleaned = 0.000155024 Jy
! Total flux subtracted in 200 components = 0.000155024 Jy
! Clean residual min=-0.001614 max=0.001531 Jy/beam
! Clean residual mean=0.000001 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.016172 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.67757e-06 Jy
! Component: 100  -  total flux cleaned = -8.07684e-07 Jy
! Component: 150  -  total flux cleaned = -7.53869e-06 Jy
! Component: 200  -  total flux cleaned = -8.26127e-07 Jy
! Total flux subtracted in 200 components = -8.26127e-07 Jy
! Clean residual min=-0.001600 max=0.001495 Jy/beam
! Clean residual mean=0.000001 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.0161711 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 59 components and 0.0161711 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.093 mas, bmaj=10.71 mas, bpa=-19.78 degrees
! Estimated noise=39.1288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.94703e-05 Jy
! Component: 100  -  total flux cleaned = 4.3477e-05 Jy
! Component: 150  -  total flux cleaned = 6.0569e-05 Jy
! Component: 200  -  total flux cleaned = 7.14236e-05 Jy
! Total flux subtracted in 200 components = 7.14236e-05 Jy
! Clean residual min=-0.001581 max=0.001500 Jy/beam
! Clean residual mean=0.000001 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0162426 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 64 components and 0.0162426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013178Jy  sigma=0.011216
! Fit after  self-cal, rms=0.013164Jy  sigma=0.011197
wmodel /d2/scr/pima/bp171ab_uvs/J1254+2737_C_map.mod
! Writing 64 model components to file: /d2/scr/pima/bp171ab_uvs/J1254+2737_C_map.mod
wobs /d2/scr/pima/bp171ab_uvs/J1254+2737_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171ab_uvs/J1254+2737_C_uvs.fits
wwins /d2/scr/pima/bp171ab_uvs/J1254+2737_C_map.win
! wwins: Wrote 1 windows to /d2/scr/pima/bp171ab_uvs/J1254+2737_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124561 Jy
! Component: 100  -  total flux cleaned = 0.000448191 Jy
! Component: 150  -  total flux cleaned = 0.000855262 Jy
! Component: 200  -  total flux cleaned = 0.00116776 Jy
! Component: 250  -  total flux cleaned = 0.00149624 Jy
! Component: 300  -  total flux cleaned = 0.00178476 Jy
! Component: 350  -  total flux cleaned = 0.00203731 Jy
! Component: 400  -  total flux cleaned = 0.00219558 Jy
! Component: 450  -  total flux cleaned = 0.00236013 Jy
! Component: 500  -  total flux cleaned = 0.002518 Jy
! Component: 550  -  total flux cleaned = 0.00265591 Jy
! Component: 600  -  total flux cleaned = 0.00280216 Jy
! Component: 650  -  total flux cleaned = 0.00289199 Jy
! Component: 700  -  total flux cleaned = 0.00301599 Jy
! Component: 750  -  total flux cleaned = 0.00309944 Jy
! Component: 800  -  total flux cleaned = 0.00316839 Jy
! Component: 850  -  total flux cleaned = 0.00324671 Jy
! Component: 900  -  total flux cleaned = 0.00327925 Jy
! Component: 950  -  total flux cleaned = 0.00330036 Jy
! Component: 1000  -  total flux cleaned = 0.00332092 Jy
! Component: 1050  -  total flux cleaned = 0.00332103 Jy
! Component: 1100  -  total flux cleaned = 0.00332119 Jy
! Component: 1150  -  total flux cleaned = 0.00335046 Jy
! Component: 1200  -  total flux cleaned = 0.00336941 Jy
! Component: 1250  -  total flux cleaned = 0.00336953 Jy
! Component: 1300  -  total flux cleaned = 0.0033788 Jy
! Component: 1350  -  total flux cleaned = 0.0033789 Jy
! Component: 1400  -  total flux cleaned = 0.00335201 Jy
! Component: 1450  -  total flux cleaned = 0.00333431 Jy
! Component: 1500  -  total flux cleaned = 0.00333433 Jy
! Component: 1550  -  total flux cleaned = 0.00331691 Jy
! Component: 1600  -  total flux cleaned = 0.00330827 Jy
! Component: 1650  -  total flux cleaned = 0.00331692 Jy
! Component: 1700  -  total flux cleaned = 0.00330829 Jy
! Component: 1750  -  total flux cleaned = 0.00329969 Jy
! Component: 1800  -  total flux cleaned = 0.00328269 Jy
! Component: 1850  -  total flux cleaned = 0.00328275 Jy
! Component: 1900  -  total flux cleaned = 0.00329118 Jy
! Component: 1950  -  total flux cleaned = 0.00326589 Jy
! Component: 2000  -  total flux cleaned = 0.00322388 Jy
! Component: 2050  -  total flux cleaned = 0.00319033 Jy
! Component: 2100  -  total flux cleaned = 0.00316515 Jy
! Component: 2150  -  total flux cleaned = 0.00311487 Jy
! Component: 2200  -  total flux cleaned = 0.00307294 Jy
! Component: 2250  -  total flux cleaned = 0.00303106 Jy
! Component: 2300  -  total flux cleaned = 0.00301425 Jy
! Component: 2350  -  total flux cleaned = 0.00300583 Jy
! Component: 2400  -  total flux cleaned = 0.00298904 Jy
! Component: 2450  -  total flux cleaned = 0.00296366 Jy
! Component: 2500  -  total flux cleaned = 0.00293822 Jy
! Component: 2550  -  total flux cleaned = 0.00292968 Jy
! Component: 2600  -  total flux cleaned = 0.00290401 Jy
! Component: 2650  -  total flux cleaned = 0.0028868 Jy
! Component: 2700  -  total flux cleaned = 0.00286947 Jy
! Component: 2750  -  total flux cleaned = 0.00286073 Jy
! Component: 2800  -  total flux cleaned = 0.00282564 Jy
! Component: 2850  -  total flux cleaned = 0.00278142 Jy
! Component: 2900  -  total flux cleaned = 0.00276363 Jy
! Component: 2950  -  total flux cleaned = 0.00272786 Jy
! Component: 3000  -  total flux cleaned = 0.00269157 Jy
! Component: 3050  -  total flux cleaned = 0.00264585 Jy
! Component: 3100  -  total flux cleaned = 0.00260884 Jy
! Component: 3150  -  total flux cleaned = 0.00259956 Jy
! Component: 3200  -  total flux cleaned = 0.00256196 Jy
! Component: 3250  -  total flux cleaned = 0.00252389 Jy
! Component: 3300  -  total flux cleaned = 0.00250462 Jy
! Component: 3350  -  total flux cleaned = 0.00244615 Jy
! Component: 3400  -  total flux cleaned = 0.00242629 Jy
! Component: 3450  -  total flux cleaned = 0.00241632 Jy
! Component: 3500  -  total flux cleaned = 0.00238592 Jy
! Component: 3550  -  total flux cleaned = 0.00235511 Jy
! Component: 3600  -  total flux cleaned = 0.00233428 Jy
! Component: 3650  -  total flux cleaned = 0.00232379 Jy
! Component: 3700  -  total flux cleaned = 0.00229198 Jy
! Component: 3750  -  total flux cleaned = 0.00224877 Jy
! Component: 3800  -  total flux cleaned = 0.0022269 Jy
! Component: 3850  -  total flux cleaned = 0.0022049 Jy
! Component: 3900  -  total flux cleaned = 0.00217127 Jy
! Component: 3950  -  total flux cleaned = 0.00216 Jy
! Component: 4000  -  total flux cleaned = 0.00211409 Jy
! Component: 4050  -  total flux cleaned = 0.00205582 Jy
! Total flux subtracted in 4096 components = 0.00204393 Jy
! Clean residual min=-0.000719 max=0.000618 Jy/beam
! Clean residual mean=0.000005 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.0182865 Jy
keep
! Adding 293 model components to the UV plane model.
! The established model now contains 357 components and 0.0182865 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp171ab_uvs/J1254+2737_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.093 x 10.71 at -19.78 degrees (North through East)
! Clean map  min=-0.0016224  max=0.014168 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171ab_uvs/J1254+2737_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0141681 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000221748 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.69535 4.69535 9.3907 18.7814 37.5628 75.1256
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.014 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  63.893 
quit
! Quitting program
! Log file /d2/scr/pima/bp171ab_uvs/J1254+2737_C_uvs.log closed on Mon Dec  9 01:44:02 2013