! Started logfile: /d2/scr/pima/bp171ab_uvs/J1222+0413_X_uvs.log on Mon Dec  9 01:37:59 2013
obs /d2/scr/pima/bp171ab_uvs/J1222+0413_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171ab_uvs/J1222+0413_X_uva.fits
! AN table 1: 6 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.525926 visibilities/baseline/integration-bin.
! Found source: J1222+0413
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1136 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171ab_uvs/J1222+0413_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.189197Jy  sigma=28.113055
! Fit after  self-cal, rms=0.385583Jy  sigma=8.774537
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7661 mas, bmaj=2.077 mas, bpa=-2.924 degrees
! Estimated noise=1.23219 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.48166 Jy
! Component: 100  -  total flux cleaned = 0.586886 Jy
! Total flux subtracted in 100 components = 0.586886 Jy
! Clean residual min=-0.023483 max=0.031739 Jy/beam
! Clean residual mean=-0.000006 rms=0.005232 Jy/beam
! Combined flux in latest and established models = 0.586886 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.586886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086776Jy  sigma=2.217196
! Fit after  self-cal, rms=0.086767Jy  sigma=2.216610
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357836 Jy
! Component: 100  -  total flux cleaned = 0.0575481 Jy
! Total flux subtracted in 100 components = 0.0575481 Jy
! Clean residual min=-0.019473 max=0.018025 Jy/beam
! Clean residual mean=-0.000013 rms=0.003587 Jy/beam
! Combined flux in latest and established models = 0.644435 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 24 components and 0.644434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.067404Jy  sigma=1.657193
! Fit after  self-cal, rms=0.067306Jy  sigma=1.654980
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8815 mas, bmaj=2.248 mas, bpa=-1.085 degrees
! Estimated noise=0.945312 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205857 Jy
! Component: 100  -  total flux cleaned = 0.0324475 Jy
! Component: 150  -  total flux cleaned = 0.0400202 Jy
! Component: 200  -  total flux cleaned = 0.0449896 Jy
! Total flux subtracted in 200 components = 0.0449896 Jy
! Clean residual min=-0.015727 max=0.019130 Jy/beam
! Clean residual mean=-0.000038 rms=0.003821 Jy/beam
! Combined flux in latest and established models = 0.689424 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 46 components and 0.689424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.061700Jy  sigma=1.469087
! Fit after  self-cal, rms=0.061643Jy  sigma=1.467647
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8815 x 2.248 at -1.085 degrees (North through East)
! Clean map  min=-0.0147  max=0.62037 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.17     HN        0.92     KP        0.96     
!   LA        1.03     MK        1.02     NL        1.05     OV        1.02     
!   PT        0.89     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.06     HN        0.92     KP        0.95     
!   LA        0.96     MK        1.04     NL        1.05     OV        0.99     
!   PT        0.92     SC        0.95     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.17     HN        0.98     KP        1.07     
!   LA        0.94     MK        1.08     NL        1.04     OV        1.03     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.17     HN        1.00     KP        0.93     
!   LA        0.97     MK        1.10     NL        1.00     OV        1.02     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.05     HN        0.97     KP        1.04     
!   LA        0.96     MK        0.98     NL        0.94     OV        0.98     
!   PT        0.89     SC        0.95     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.08     HN        1.05     KP        1.03     
!   LA        1.03     MK        1.02     NL        1.00     OV        1.05     
!   PT        0.93     SC        1.03     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        0.98     KP        1.01     
!   LA        0.94     MK        1.00     NL        1.00     OV        1.05     
!   PT        0.90     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.06     HN        0.98     KP        1.06     
!   LA        0.90     MK        0.98     NL        1.00     OV        1.04     
!   PT        0.85     SC        1.09     
! 
! 
! Fit before self-cal, rms=0.061643Jy  sigma=1.467647
! Fit after  self-cal, rms=0.025918Jy  sigma=0.455232
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9191 mas, bmaj=2.343 mas, bpa=-1.527 degrees
! Estimated noise=0.95415 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275126 Jy
! Component: 100  -  total flux cleaned = 0.00342465 Jy
! Component: 150  -  total flux cleaned = 0.00383895 Jy
! Component: 200  -  total flux cleaned = 0.00412386 Jy
! Total flux subtracted in 200 components = 0.00412386 Jy
! Clean residual min=-0.003184 max=0.002807 Jy/beam
! Clean residual mean=-0.000004 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.693548 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 64 components and 0.693548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024705Jy  sigma=0.423976
! Fit after  self-cal, rms=0.024656Jy  sigma=0.422709
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024656Jy  sigma=0.422709
! Fit after  self-cal, rms=0.024714Jy  sigma=0.420326
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9198 mas, bmaj=2.345 mas, bpa=-1.546 degrees
! Estimated noise=0.952467 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00202614 Jy
! Component: 100  -  total flux cleaned = -0.00209346 Jy
! Component: 150  -  total flux cleaned = -0.00204018 Jy
! Component: 200  -  total flux cleaned = -0.00199126 Jy
! Total flux subtracted in 200 components = -0.00199126 Jy
! Clean residual min=-0.002754 max=0.002537 Jy/beam
! Clean residual mean=-0.000004 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.691557 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 68 components and 0.691557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024301Jy  sigma=0.411868
! Fit after  self-cal, rms=0.024279Jy  sigma=0.411359
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.65849e-05 Jy
! Component: 100  -  total flux cleaned = 0.00017117 Jy
! Component: 150  -  total flux cleaned = 0.000291145 Jy
! Component: 200  -  total flux cleaned = 0.000290451 Jy
! Total flux subtracted in 200 components = 0.000290451 Jy
! Clean residual min=-0.002601 max=0.002395 Jy/beam
! Clean residual mean=-0.000004 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.691847 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 73 components and 0.691847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024147Jy  sigma=0.407184
! Fit after  self-cal, rms=0.024140Jy  sigma=0.406887
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024140Jy  sigma=0.406887
! Fit after  self-cal, rms=0.024197Jy  sigma=0.404462
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9206 mas, bmaj=2.347 mas, bpa=-1.558 degrees
! Estimated noise=0.950989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00175429 Jy
! Component: 100  -  total flux cleaned = -0.00233957 Jy
! Component: 150  -  total flux cleaned = -0.00240903 Jy
! Component: 200  -  total flux cleaned = -0.00243776 Jy
! Total flux subtracted in 200 components = -0.00243776 Jy
! Clean residual min=-0.002302 max=0.002213 Jy/beam
! Clean residual mean=-0.000003 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.689409 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 77 components and 0.689409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023961Jy  sigma=0.401574
! Fit after  self-cal, rms=0.023954Jy  sigma=0.401405
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.23256e-05 Jy
! Component: 100  -  total flux cleaned = -2.23724e-05 Jy
! Component: 150  -  total flux cleaned = -4.74529e-05 Jy
! Component: 200  -  total flux cleaned = -2.48165e-05 Jy
! Total flux subtracted in 200 components = -2.48165e-05 Jy
! Clean residual min=-0.002220 max=0.002138 Jy/beam
! Clean residual mean=-0.000003 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.689385 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 82 components and 0.689385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023899Jy  sigma=0.399929
! Fit after  self-cal, rms=0.023900Jy  sigma=0.399822
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023900Jy  sigma=0.399822
! Fit after  self-cal, rms=0.023982Jy  sigma=0.397805
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.121 mas, bmaj=3.555 mas, bpa=-2.438 degrees
! Estimated noise=1.15412 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00170019 Jy
! Component: 100  -  total flux cleaned = -0.00178272 Jy
! Component: 150  -  total flux cleaned = -0.00183923 Jy
! Component: 200  -  total flux cleaned = -0.00191563 Jy
! Total flux subtracted in 200 components = -0.00191563 Jy
! Clean residual min=-0.001831 max=0.002433 Jy/beam
! Clean residual mean=-0.000006 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.687469 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 97 components and 0.687469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023815Jy  sigma=0.397982
! Fit after  self-cal, rms=0.023821Jy  sigma=0.397756
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141296 Jy
! Component: 100  -  total flux cleaned = -0.00014083 Jy
! Component: 150  -  total flux cleaned = -0.000125107 Jy
! Component: 200  -  total flux cleaned = -0.000112078 Jy
! Total flux subtracted in 200 components = -0.000112078 Jy
! Clean residual min=-0.001831 max=0.002390 Jy/beam
! Clean residual mean=-0.000006 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.687357 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 101 components and 0.687357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023813Jy  sigma=0.397841
! Fit after  self-cal, rms=0.023815Jy  sigma=0.397793
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9212 mas, bmaj=2.349 mas, bpa=-1.561 degrees
! Estimated noise=0.94949 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9212 x 2.349 at -1.561 degrees (North through East)
! Clean map  min=-0.001941  max=0.62206 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023815Jy  sigma=0.397793
! Fit after  self-cal, rms=0.019790Jy  sigma=0.347147
! Inverting map and beam 
! Estimated beam: bmin=0.9219 mas, bmaj=2.35 mas, bpa=-1.572 degrees
! Estimated noise=0.949532 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000478283 Jy
! Component: 100  -  total flux cleaned = -0.000697371 Jy
! Component: 150  -  total flux cleaned = -0.000796028 Jy
! Component: 200  -  total flux cleaned = -0.000863532 Jy
! Total flux subtracted in 200 components = -0.000863532 Jy
! Clean residual min=-0.001787 max=0.001628 Jy/beam
! Clean residual mean=-0.000003 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.686493 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 113 components and 0.686493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019731Jy  sigma=0.345507
! Fit after  self-cal, rms=0.019732Jy  sigma=0.345419
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.80962e-05 Jy
! Component: 100  -  total flux cleaned = 4.35324e-05 Jy
! Component: 150  -  total flux cleaned = 1.72162e-05 Jy
! Component: 200  -  total flux cleaned = 1.76053e-05 Jy
! Total flux subtracted in 200 components = 1.76053e-05 Jy
! Clean residual min=-0.001750 max=0.001618 Jy/beam
! Clean residual mean=-0.000003 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.686511 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 120 components and 0.686511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019701Jy  sigma=0.344968
! Fit after  self-cal, rms=0.019708Jy  sigma=0.344900
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019708Jy  sigma=0.344900
! Fit after  self-cal, rms=0.019692Jy  sigma=0.344631
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7728 mas, bmaj=2.09 mas, bpa=-3.109 degrees
! Estimated noise=1.21547 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.481705 Jy
! Component: 100  -  total flux cleaned = 0.587351 Jy
! Component: 150  -  total flux cleaned = 0.620201 Jy
! Component: 200  -  total flux cleaned = 0.638753 Jy
! Total flux subtracted in 200 components = 0.638753 Jy
! Clean residual min=-0.005537 max=0.010696 Jy/beam
! Clean residual mean=-0.000001 rms=0.001548 Jy/beam
! Combined flux in latest and established models = 0.638753 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.638753 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9223 mas, bmaj=2.351 mas, bpa=-1.567 degrees
! Estimated noise=0.949387 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015162 Jy
! Component: 100  -  total flux cleaned = 0.0235771 Jy
! Component: 150  -  total flux cleaned = 0.0291387 Jy
! Component: 200  -  total flux cleaned = 0.0332399 Jy
! Total flux subtracted in 200 components = 0.0332399 Jy
! Clean residual min=-0.002602 max=0.003078 Jy/beam
! Clean residual mean=-0.000007 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.671993 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 56 components and 0.671993 Jy
! Inverting map 
! Added new window around map position (6.8, -14.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00333588 Jy
! Component: 100  -  total flux cleaned = 0.0058471 Jy
! Component: 150  -  total flux cleaned = 0.00782302 Jy
! Component: 200  -  total flux cleaned = 0.00892102 Jy
! Total flux subtracted in 200 components = 0.00892102 Jy
! Clean residual min=-0.001978 max=0.001833 Jy/beam
! Clean residual mean=-0.000005 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.680914 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 77 components and 0.680914 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.122 mas, bmaj=3.558 mas, bpa=-2.468 degrees
! Estimated noise=1.15256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162991 Jy
! Component: 100  -  total flux cleaned = 0.00266575 Jy
! Component: 150  -  total flux cleaned = 0.00303139 Jy
! Component: 200  -  total flux cleaned = 0.00318658 Jy
! Total flux subtracted in 200 components = 0.00318658 Jy
! Clean residual min=-0.001810 max=0.002125 Jy/beam
! Clean residual mean=-0.000008 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.684101 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000162722 Jy
! Component: 100  -  total flux cleaned = 0.000289986 Jy
! Component: 150  -  total flux cleaned = 0.000424971 Jy
! Component: 200  -  total flux cleaned = 0.000532047 Jy
! Total flux subtracted in 200 components = 0.000532047 Jy
! Clean residual min=-0.001771 max=0.002008 Jy/beam
! Clean residual mean=-0.000008 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.684633 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 110 components and 0.684632 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9223 mas, bmaj=2.351 mas, bpa=-1.567 degrees
! Estimated noise=0.949387 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000742859 Jy
! Component: 100  -  total flux cleaned = -0.000702391 Jy
! Component: 150  -  total flux cleaned = -0.000628063 Jy
! Component: 200  -  total flux cleaned = -0.000522959 Jy
! Total flux subtracted in 200 components = -0.000522959 Jy
! Clean residual min=-0.001803 max=0.001722 Jy/beam
! Clean residual mean=-0.000004 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.684109 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 126 components and 0.684109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019774Jy  sigma=0.345296
! Fit after  self-cal, rms=0.019832Jy  sigma=0.344567
wmodel /d2/scr/pima/bp171ab_uvs/J1222+0413_X_map.mod
! Writing 126 model components to file: /d2/scr/pima/bp171ab_uvs/J1222+0413_X_map.mod
wobs /d2/scr/pima/bp171ab_uvs/J1222+0413_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171ab_uvs/J1222+0413_X_uvs.fits
wwins /d2/scr/pima/bp171ab_uvs/J1222+0413_X_map.win
! wwins: Wrote 3 windows to /d2/scr/pima/bp171ab_uvs/J1222+0413_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000223717 Jy
! Component: 100  -  total flux cleaned = -0.000252827 Jy
! Component: 150  -  total flux cleaned = -0.000250803 Jy
! Component: 200  -  total flux cleaned = -0.000249969 Jy
! Component: 250  -  total flux cleaned = -0.000321938 Jy
! Component: 300  -  total flux cleaned = -0.000275389 Jy
! Component: 350  -  total flux cleaned = -0.000319454 Jy
! Component: 400  -  total flux cleaned = -0.000319472 Jy
! Component: 450  -  total flux cleaned = -0.000361312 Jy
! Component: 500  -  total flux cleaned = -0.000380987 Jy
! Component: 550  -  total flux cleaned = -0.000342476 Jy
! Component: 600  -  total flux cleaned = -0.000361522 Jy
! Component: 650  -  total flux cleaned = -0.000325942 Jy
! Component: 700  -  total flux cleaned = -0.000256483 Jy
! Component: 750  -  total flux cleaned = -0.000188821 Jy
! Component: 800  -  total flux cleaned = -0.000156284 Jy
! Component: 850  -  total flux cleaned = -0.000172067 Jy
! Component: 900  -  total flux cleaned = -0.000171731 Jy
! Component: 950  -  total flux cleaned = -0.00017171 Jy
! Component: 1000  -  total flux cleaned = -0.000201914 Jy
! Component: 1050  -  total flux cleaned = -0.000216586 Jy
! Component: 1100  -  total flux cleaned = -0.000245329 Jy
! Component: 1150  -  total flux cleaned = -0.000231049 Jy
! Component: 1200  -  total flux cleaned = -0.000203617 Jy
! Component: 1250  -  total flux cleaned = -0.000217593 Jy
! Component: 1300  -  total flux cleaned = -0.000311 Jy
! Component: 1350  -  total flux cleaned = -0.000324143 Jy
! Component: 1400  -  total flux cleaned = -0.000375568 Jy
! Component: 1450  -  total flux cleaned = -0.000400636 Jy
! Component: 1500  -  total flux cleaned = -0.00045017 Jy
! Component: 1550  -  total flux cleaned = -0.000474799 Jy
! Component: 1600  -  total flux cleaned = -0.000595128 Jy
! Component: 1650  -  total flux cleaned = -0.000606804 Jy
! Component: 1700  -  total flux cleaned = -0.000688525 Jy
! Component: 1750  -  total flux cleaned = -0.000734401 Jy
! Component: 1800  -  total flux cleaned = -0.000757211 Jy
! Component: 1850  -  total flux cleaned = -0.000813141 Jy
! Component: 1900  -  total flux cleaned = -0.000890308 Jy
! Component: 1950  -  total flux cleaned = -0.000890293 Jy
! Component: 2000  -  total flux cleaned = -0.000976071 Jy
! Component: 2050  -  total flux cleaned = -0.000997179 Jy
! Component: 2100  -  total flux cleaned = -0.00104941 Jy
! Component: 2150  -  total flux cleaned = -0.00108029 Jy
! Component: 2200  -  total flux cleaned = -0.00111076 Jy
! Component: 2250  -  total flux cleaned = -0.00116099 Jy
! Component: 2300  -  total flux cleaned = -0.00123032 Jy
! Component: 2350  -  total flux cleaned = -0.00128893 Jy
! Component: 2400  -  total flux cleaned = -0.00134667 Jy
! Component: 2450  -  total flux cleaned = -0.00138487 Jy
! Component: 2500  -  total flux cleaned = -0.00142246 Jy
! Component: 2550  -  total flux cleaned = -0.00145025 Jy
! Component: 2600  -  total flux cleaned = -0.0014685 Jy
! Component: 2650  -  total flux cleaned = -0.00147765 Jy
! Component: 2700  -  total flux cleaned = -0.00151384 Jy
! Component: 2750  -  total flux cleaned = -0.00158488 Jy
! Component: 2800  -  total flux cleaned = -0.00162871 Jy
! Component: 2850  -  total flux cleaned = -0.00165476 Jy
! Component: 2900  -  total flux cleaned = -0.00169788 Jy
! Component: 2950  -  total flux cleaned = -0.00176606 Jy
! Component: 3000  -  total flux cleaned = -0.00181657 Jy
! Component: 3050  -  total flux cleaned = -0.00184153 Jy
! Component: 3100  -  total flux cleaned = -0.00189104 Jy
! Component: 3150  -  total flux cleaned = -0.00194826 Jy
! Component: 3200  -  total flux cleaned = -0.00198864 Jy
! Component: 3250  -  total flux cleaned = -0.00201279 Jy
! Component: 3300  -  total flux cleaned = -0.00206055 Jy
! Component: 3350  -  total flux cleaned = -0.00212373 Jy
! Component: 3400  -  total flux cleaned = -0.00215495 Jy
! Component: 3450  -  total flux cleaned = -0.00220914 Jy
! Component: 3500  -  total flux cleaned = -0.00223985 Jy
! Component: 3550  -  total flux cleaned = -0.00227022 Jy
! Component: 3600  -  total flux cleaned = -0.0023005 Jy
! Component: 3650  -  total flux cleaned = -0.00232297 Jy
! Component: 3700  -  total flux cleaned = -0.00234517 Jy
! Component: 3750  -  total flux cleaned = -0.00238206 Jy
! Component: 3800  -  total flux cleaned = -0.00241859 Jy
! Component: 3850  -  total flux cleaned = -0.00245486 Jy
! Component: 3900  -  total flux cleaned = -0.00247643 Jy
! Component: 3950  -  total flux cleaned = -0.00252651 Jy
! Component: 4000  -  total flux cleaned = -0.00257618 Jy
! Component: 4050  -  total flux cleaned = -0.00260436 Jy
! Total flux subtracted in 4096 components = -0.00266036 Jy
! Clean residual min=-0.000450 max=0.000400 Jy/beam
! Clean residual mean=-0.000001 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.681449 Jy
keep
! Adding 276 model components to the UV plane model.
! The established model now contains 402 components and 0.681449 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp171ab_uvs/J1222+0413_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9223 x 2.351 at -1.567 degrees (North through East)
! Clean map  min=-0.0013614  max=0.62433 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171ab_uvs/J1222+0413_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.624334 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00011416 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0548551 0.0548551 0.10971 0.21942 0.438841 0.877681 1.75536 3.51072 7.02145 14.0429 28.0858 56.1716
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.624 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  5468.96 
quit
! Quitting program
! Log file /d2/scr/pima/bp171ab_uvs/J1222+0413_X_uvs.log closed on Mon Dec  9 01:38:04 2013