! Started logfile: /d2/scr/pima/bp171aa_uvs/J1117+1904_X_uvs.log on Thu Nov 28 23:35:12 2013
obs /d2/scr/pima/bp171aa_uvs/J1117+1904_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171aa_uvs/J1117+1904_X_uva.fits
! AN table 1: 13 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.859829 visibilities/baseline/integration-bin.
! Found source: J1117+1904
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4024 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171aa_uvs/J1117+1904_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.997661Jy  sigma=0.705116
! Fit after  self-cal, rms=0.974625Jy  sigma=0.688838
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7356 mas, bmaj=2.084 mas, bpa=3.14 degrees
! Estimated noise=23.7798 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191057 Jy
! Component: 100  -  total flux cleaned = 0.0238288 Jy
! Total flux subtracted in 100 components = 0.0238288 Jy
! Clean residual min=-0.002509 max=0.002557 Jy/beam
! Clean residual mean=-0.000001 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.0238288 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0238288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030607Jy  sigma=0.021608
! Fit after  self-cal, rms=0.029971Jy  sigma=0.021158
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.904 mas, bmaj=2.297 mas, bpa=3.471 degrees
! Estimated noise=15.7718 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0032806 Jy
! Component: 100  -  total flux cleaned = 0.00478818 Jy
! Component: 150  -  total flux cleaned = 0.00568831 Jy
! Component: 200  -  total flux cleaned = 0.00627182 Jy
! Total flux subtracted in 200 components = 0.00627182 Jy
! Clean residual min=-0.001481 max=0.001478 Jy/beam
! Clean residual mean=-0.000003 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.0301006 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 31 components and 0.0301006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029633Jy  sigma=0.020919
! Fit after  self-cal, rms=0.029624Jy  sigma=0.020913
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.904 x 2.297 at 3.471 degrees (North through East)
! Clean map  min=-0.0013768  max=0.025987 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.13     HN        0.86     KP        0.98     
!   LA        0.94     MK        1.13     NL        0.96     OV        1.15     
!   PT        0.88     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        1.00     KP        0.97     
!   LA        0.91     MK        0.97     NL        0.89     OV        1.15     
!   PT        1.03     SC        0.94     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.01     HN        0.84     KP        0.95     
!   LA        1.02     MK        1.17     NL        1.04     OV        0.90     
!   PT        0.90     SC        1.15     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.029624Jy  sigma=0.020913
! Fit after  self-cal, rms=0.029411Jy  sigma=0.020862
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9084 mas, bmaj=2.305 mas, bpa=3.572 degrees
! Estimated noise=15.6781 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000237298 Jy
! Component: 100  -  total flux cleaned = 0.000313974 Jy
! Component: 150  -  total flux cleaned = 0.000366107 Jy
! Component: 200  -  total flux cleaned = 0.000402452 Jy
! Total flux subtracted in 200 components = 0.000402452 Jy
! Clean residual min=-0.001431 max=0.001381 Jy/beam
! Clean residual mean=-0.000002 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.0305031 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 39 components and 0.0305031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029401Jy  sigma=0.020856
! Fit after  self-cal, rms=0.029418Jy  sigma=0.020851
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029418Jy  sigma=0.020851
! Fit after  self-cal, rms=0.029414Jy  sigma=0.020850
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9078 mas, bmaj=2.302 mas, bpa=3.583 degrees
! Estimated noise=15.6588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.2151e-05 Jy
! Component: 100  -  total flux cleaned = 0.000126998 Jy
! Component: 150  -  total flux cleaned = 0.000158075 Jy
! Component: 200  -  total flux cleaned = 0.000178357 Jy
! Total flux subtracted in 200 components = 0.000178357 Jy
! Clean residual min=-0.001430 max=0.001379 Jy/beam
! Clean residual mean=-0.000002 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.0306814 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 46 components and 0.0306814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029409Jy  sigma=0.020847
! Fit after  self-cal, rms=0.029411Jy  sigma=0.020846
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.70162e-05 Jy
! Component: 100  -  total flux cleaned = 4.36485e-05 Jy
! Component: 150  -  total flux cleaned = 5.56573e-05 Jy
! Component: 200  -  total flux cleaned = 6.12524e-05 Jy
! Total flux subtracted in 200 components = 6.12524e-05 Jy
! Clean residual min=-0.001431 max=0.001380 Jy/beam
! Clean residual mean=-0.000002 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.0307427 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 50 components and 0.0307427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029408Jy  sigma=0.020844
! Fit after  self-cal, rms=0.029408Jy  sigma=0.020844
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029408Jy  sigma=0.020844
! Fit after  self-cal, rms=0.029373Jy  sigma=0.020844
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9073 mas, bmaj=2.301 mas, bpa=3.588 degrees
! Estimated noise=15.6398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.13079e-05 Jy
! Component: 100  -  total flux cleaned = 5.86379e-05 Jy
! Component: 150  -  total flux cleaned = 6.91954e-05 Jy
! Component: 200  -  total flux cleaned = 7.42345e-05 Jy
! Total flux subtracted in 200 components = 7.42345e-05 Jy
! Clean residual min=-0.001428 max=0.001383 Jy/beam
! Clean residual mean=-0.000002 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.0308169 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 52 components and 0.0308169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029371Jy  sigma=0.020842
! Fit after  self-cal, rms=0.029371Jy  sigma=0.020842
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.31816e-05 Jy
! Component: 100  -  total flux cleaned = 2.30255e-05 Jy
! Component: 150  -  total flux cleaned = 3.23482e-05 Jy
! Component: 200  -  total flux cleaned = 4.12347e-05 Jy
! Total flux subtracted in 200 components = 4.12347e-05 Jy
! Clean residual min=-0.001428 max=0.001383 Jy/beam
! Clean residual mean=-0.000002 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.0308581 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 55 components and 0.0308581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029370Jy  sigma=0.020841
! Fit after  self-cal, rms=0.029370Jy  sigma=0.020841
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029370Jy  sigma=0.020841
! Fit after  self-cal, rms=0.029355Jy  sigma=0.020841
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.007 mas, bmaj=3.084 mas, bpa=-1.589 degrees
! Estimated noise=20.4071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.21434e-05 Jy
! Component: 100  -  total flux cleaned = -3.02332e-05 Jy
! Component: 150  -  total flux cleaned = -6.50068e-05 Jy
! Component: 200  -  total flux cleaned = -9.64971e-05 Jy
! Total flux subtracted in 200 components = -9.64971e-05 Jy
! Clean residual min=-0.001762 max=0.001685 Jy/beam
! Clean residual mean=-0.000005 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.0307616 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 58 components and 0.0307616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029360Jy  sigma=0.020843
! Fit after  self-cal, rms=0.029358Jy  sigma=0.020842
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.56198e-06 Jy
! Component: 100  -  total flux cleaned = -3.54419e-05 Jy
! Component: 150  -  total flux cleaned = -3.53051e-05 Jy
! Component: 200  -  total flux cleaned = -3.52826e-05 Jy
! Total flux subtracted in 200 components = -3.52826e-05 Jy
! Clean residual min=-0.001759 max=0.001686 Jy/beam
! Clean residual mean=-0.000005 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.0307264 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 61 components and 0.0307264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029360Jy  sigma=0.020843
! Fit after  self-cal, rms=0.029359Jy  sigma=0.020843
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.907 mas, bmaj=2.3 mas, bpa=3.588 degrees
! Estimated noise=15.6327 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.907 x 2.3 at 3.588 degrees (North through East)
! Clean map  min=-0.001348  max=0.025162 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7381 mas, bmaj=2.084 mas, bpa=3.176 degrees
! Estimated noise=24.06 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0195016 Jy
! Component: 100  -  total flux cleaned = 0.0248201 Jy
! Component: 150  -  total flux cleaned = 0.0273225 Jy
! Component: 200  -  total flux cleaned = 0.0287421 Jy
! Total flux subtracted in 200 components = 0.0287421 Jy
! Clean residual min=-0.002049 max=0.002077 Jy/beam
! Clean residual mean=-0.000001 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.0287421 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0287421 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.907 mas, bmaj=2.3 mas, bpa=3.588 degrees
! Estimated noise=15.6327 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101831 Jy
! Component: 100  -  total flux cleaned = 0.00158371 Jy
! Component: 150  -  total flux cleaned = 0.00180671 Jy
! Component: 200  -  total flux cleaned = 0.00184264 Jy
! Total flux subtracted in 200 components = 0.00184264 Jy
! Clean residual min=-0.001419 max=0.001394 Jy/beam
! Clean residual mean=-0.000002 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.0305847 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 25 components and 0.0305847 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.007 mas, bmaj=3.084 mas, bpa=-1.589 degrees
! Estimated noise=20.4071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.22446e-05 Jy
! Component: 100  -  total flux cleaned = 7.72304e-05 Jy
! Component: 150  -  total flux cleaned = 9.64393e-05 Jy
! Component: 200  -  total flux cleaned = 0.000106564 Jy
! Total flux subtracted in 200 components = 0.000106564 Jy
! Clean residual min=-0.001774 max=0.001687 Jy/beam
! Clean residual mean=-0.000005 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.0306913 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.44631e-07 Jy
! Component: 100  -  total flux cleaned = 2.55374e-07 Jy
! Component: 150  -  total flux cleaned = -2.7868e-07 Jy
! Component: 200  -  total flux cleaned = -1.59877e-07 Jy
! Total flux subtracted in 200 components = -1.59877e-07 Jy
! Clean residual min=-0.001766 max=0.001685 Jy/beam
! Clean residual mean=-0.000005 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.0306911 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 36 components and 0.0306911 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.907 mas, bmaj=2.3 mas, bpa=3.588 degrees
! Estimated noise=15.6327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.87989e-05 Jy
! Component: 100  -  total flux cleaned = 0.000113487 Jy
! Component: 150  -  total flux cleaned = 0.000113432 Jy
! Component: 200  -  total flux cleaned = 0.000113195 Jy
! Total flux subtracted in 200 components = 0.000113195 Jy
! Clean residual min=-0.001419 max=0.001380 Jy/beam
! Clean residual mean=-0.000002 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.0308043 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 47 components and 0.0308043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029364Jy  sigma=0.020846
! Fit after  self-cal, rms=0.029360Jy  sigma=0.020843
wmodel /d2/scr/pima/bp171aa_uvs/J1117+1904_X_map.mod
! Writing 47 model components to file: /d2/scr/pima/bp171aa_uvs/J1117+1904_X_map.mod
wobs /d2/scr/pima/bp171aa_uvs/J1117+1904_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171aa_uvs/J1117+1904_X_uvs.fits
wwins /d2/scr/pima/bp171aa_uvs/J1117+1904_X_map.win
! wwins: Wrote 1 windows to /d2/scr/pima/bp171aa_uvs/J1117+1904_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000189449 Jy
! Component: 100  -  total flux cleaned = -0.000329649 Jy
! Component: 150  -  total flux cleaned = -0.000418692 Jy
! Component: 200  -  total flux cleaned = -0.000587639 Jy
! Component: 250  -  total flux cleaned = -0.000648639 Jy
! Component: 300  -  total flux cleaned = -0.000707276 Jy
! Component: 350  -  total flux cleaned = -0.000707759 Jy
! Component: 400  -  total flux cleaned = -0.000762536 Jy
! Component: 450  -  total flux cleaned = -0.000762309 Jy
! Component: 500  -  total flux cleaned = -0.000744749 Jy
! Component: 550  -  total flux cleaned = -0.000694491 Jy
! Component: 600  -  total flux cleaned = -0.000711352 Jy
! Component: 650  -  total flux cleaned = -0.000711365 Jy
! Component: 700  -  total flux cleaned = -0.000648641 Jy
! Component: 750  -  total flux cleaned = -0.000664053 Jy
! Component: 800  -  total flux cleaned = -0.000619084 Jy
! Component: 850  -  total flux cleaned = -0.000619047 Jy
! Component: 900  -  total flux cleaned = -0.000590408 Jy
! Component: 950  -  total flux cleaned = -0.000590462 Jy
! Component: 1000  -  total flux cleaned = -0.000576749 Jy
! Component: 1050  -  total flux cleaned = -0.000536716 Jy
! Component: 1100  -  total flux cleaned = -0.000511011 Jy
! Component: 1150  -  total flux cleaned = -0.000510878 Jy
! Component: 1200  -  total flux cleaned = -0.000447272 Jy
! Component: 1250  -  total flux cleaned = -0.000435022 Jy
! Component: 1300  -  total flux cleaned = -0.000435088 Jy
! Component: 1350  -  total flux cleaned = -0.000398955 Jy
! Component: 1400  -  total flux cleaned = -0.000387334 Jy
! Component: 1450  -  total flux cleaned = -0.000340984 Jy
! Component: 1500  -  total flux cleaned = -0.000318165 Jy
! Component: 1550  -  total flux cleaned = -0.000295508 Jy
! Component: 1600  -  total flux cleaned = -0.000217904 Jy
! Component: 1650  -  total flux cleaned = -0.000195964 Jy
! Component: 1700  -  total flux cleaned = -0.000163658 Jy
! Component: 1750  -  total flux cleaned = -0.000142348 Jy
! Component: 1800  -  total flux cleaned = -0.000173613 Jy
! Component: 1850  -  total flux cleaned = -0.000132115 Jy
! Component: 1900  -  total flux cleaned = -9.12546e-05 Jy
! Component: 1950  -  total flux cleaned = -5.08326e-05 Jy
! Component: 2000  -  total flux cleaned = 9.01025e-06 Jy
! Component: 2050  -  total flux cleaned = 5.81641e-05 Jy
! Component: 2100  -  total flux cleaned = 8.72699e-05 Jy
! Component: 2150  -  total flux cleaned = 0.000135463 Jy
! Component: 2200  -  total flux cleaned = 0.000202146 Jy
! Component: 2250  -  total flux cleaned = 0.000230321 Jy
! Component: 2300  -  total flux cleaned = 0.000248916 Jy
! Component: 2350  -  total flux cleaned = 0.000332079 Jy
! Component: 2400  -  total flux cleaned = 0.000368573 Jy
! Component: 2450  -  total flux cleaned = 0.000422781 Jy
! Component: 2500  -  total flux cleaned = 0.000476433 Jy
! Component: 2550  -  total flux cleaned = 0.000485285 Jy
! Component: 2600  -  total flux cleaned = 0.000581676 Jy
! Component: 2650  -  total flux cleaned = 0.000616477 Jy
! Component: 2700  -  total flux cleaned = 0.000676479 Jy
! Component: 2750  -  total flux cleaned = 0.000727589 Jy
! Component: 2800  -  total flux cleaned = 0.00076961 Jy
! Component: 2850  -  total flux cleaned = 0.00082805 Jy
! Component: 2900  -  total flux cleaned = 0.000869439 Jy
! Component: 2950  -  total flux cleaned = 0.000902193 Jy
! Component: 3000  -  total flux cleaned = 0.000910301 Jy
! Component: 3050  -  total flux cleaned = 0.000918346 Jy
! Component: 3100  -  total flux cleaned = 0.000942385 Jy
! Component: 3150  -  total flux cleaned = 0.000958197 Jy
! Component: 3200  -  total flux cleaned = 0.000966055 Jy
! Component: 3250  -  total flux cleaned = 0.000997384 Jy
! Component: 3300  -  total flux cleaned = 0.00105164 Jy
! Component: 3350  -  total flux cleaned = 0.0010669 Jy
! Component: 3400  -  total flux cleaned = 0.00106685 Jy
! Component: 3450  -  total flux cleaned = 0.00112003 Jy
! Component: 3500  -  total flux cleaned = 0.0011276 Jy
! Component: 3550  -  total flux cleaned = 0.00114255 Jy
! Component: 3600  -  total flux cleaned = 0.00116494 Jy
! Component: 3650  -  total flux cleaned = 0.00120925 Jy
! Component: 3700  -  total flux cleaned = 0.00123131 Jy
! Component: 3750  -  total flux cleaned = 0.00123138 Jy
! Component: 3800  -  total flux cleaned = 0.00127489 Jy
! Component: 3850  -  total flux cleaned = 0.00128208 Jy
! Component: 3900  -  total flux cleaned = 0.00130356 Jy
! Component: 3950  -  total flux cleaned = 0.00129637 Jy
! Component: 4000  -  total flux cleaned = 0.00130345 Jy
! Component: 4050  -  total flux cleaned = 0.00133175 Jy
! Total flux subtracted in 4096 components = 0.00136679 Jy
! Clean residual min=-0.000537 max=0.000477 Jy/beam
! Clean residual mean=-0.000000 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.0321711 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 337 components and 0.0321711 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp171aa_uvs/J1117+1904_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.907 x 2.3 at 3.588 degrees (North through East)
! Clean map  min=-0.00092575  max=0.025223 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171aa_uvs/J1117+1904_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0252231 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00011854 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.4099 1.4099 2.81981 5.63961 11.2792 22.5584 45.1169 90.2338
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.025 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  212.78 
quit
! Quitting program
! Log file /d2/scr/pima/bp171aa_uvs/J1117+1904_X_uvs.log closed on Thu Nov 28 23:35:18 2013