! Started logfile: /d2/scr/pima/bp171aa_uvs/J1043-3400_X_uvs.log on Thu Nov 28 23:34:17 2013
obs /d2/scr/pima/bp171aa_uvs/J1043-3400_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171aa_uvs/J1043-3400_X_uva.fits
! AN table 1: 13 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.479853 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1043-3400
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1048 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171aa_uvs/J1043-3400_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999786Jy  sigma=0.706888
! Fit after  self-cal, rms=0.971438Jy  sigma=0.686853
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.697 mas, bmaj=16.81 mas, bpa=20.36 degrees
! Estimated noise=38.8932 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0234787 Jy
! Component: 100  -  total flux cleaned = 0.0287248 Jy
! Total flux subtracted in 100 components = 0.0287248 Jy
! Clean residual min=-0.003053 max=0.003082 Jy/beam
! Clean residual mean=-0.000123 rms=0.001285 Jy/beam
! Combined flux in latest and established models = 0.0287248 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0287248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032530Jy  sigma=0.022999
! Fit after  self-cal, rms=0.030349Jy  sigma=0.021457
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.178 mas, bmaj=16.12 mas, bpa=19.52 degrees
! Estimated noise=31.8815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104962 Jy
! Component: 100  -  total flux cleaned = -0.000767042 Jy
! Component: 150  -  total flux cleaned = -0.00196784 Jy
! Component: 200  -  total flux cleaned = -0.0030378 Jy
! Total flux subtracted in 200 components = -0.0030378 Jy
! Clean residual min=-0.001116 max=0.001113 Jy/beam
! Clean residual mean=-0.000029 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.025687 Jy
! Performing phase self-cal
! Adding 95 model components to the UV plane model.
! The established model now contains 116 components and 0.025687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029508Jy  sigma=0.020862
! Fit after  self-cal, rms=0.029433Jy  sigma=0.020809
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.178 x 16.12 at 19.52 degrees (North through East)
! Clean map  min=-0.0035253  max=0.025401 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.85     KP        1.09     LA        0.93     
!   OV        1.00     PT        0.87     SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.91     KP        1.04     LA        1.04     
!   OV        0.91     PT        0.98     SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.029433Jy  sigma=0.020809
! Fit after  self-cal, rms=0.028986Jy  sigma=0.020487
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.196 mas, bmaj=16.3 mas, bpa=19.13 degrees
! Estimated noise=31.9427 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000486448 Jy
! Component: 100  -  total flux cleaned = -0.0001435 Jy
! Component: 150  -  total flux cleaned = -0.000885835 Jy
! Component: 200  -  total flux cleaned = -0.00152101 Jy
! Total flux subtracted in 200 components = -0.00152101 Jy
! Clean residual min=-0.000545 max=0.000529 Jy/beam
! Clean residual mean=-0.000004 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.024166 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 187 components and 0.024166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028862Jy  sigma=0.020400
! Fit after  self-cal, rms=0.028866Jy  sigma=0.020377
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028866Jy  sigma=0.020377
! Fit after  self-cal, rms=0.028866Jy  sigma=0.020347
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.199 mas, bmaj=16.37 mas, bpa=19.06 degrees
! Estimated noise=31.7638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.04702e-05 Jy
! Component: 100  -  total flux cleaned = -0.000311367 Jy
! Component: 150  -  total flux cleaned = -0.000549021 Jy
! Component: 200  -  total flux cleaned = -0.00074472 Jy
! Total flux subtracted in 200 components = -0.00074472 Jy
! Clean residual min=-0.000396 max=0.000396 Jy/beam
! Clean residual mean=-0.000009 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.0234213 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 265 components and 0.0234213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028813Jy  sigma=0.020309
! Fit after  self-cal, rms=0.028836Jy  sigma=0.020299
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000145703 Jy
! Component: 100  -  total flux cleaned = -0.000344787 Jy
! Component: 150  -  total flux cleaned = -0.000466537 Jy
! Component: 200  -  total flux cleaned = -0.000623099 Jy
! Total flux subtracted in 200 components = -0.000623099 Jy
! Clean residual min=-0.000324 max=0.000325 Jy/beam
! Clean residual mean=-0.000003 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.0227982 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 337 components and 0.0227982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028809Jy  sigma=0.020280
! Fit after  self-cal, rms=0.028804Jy  sigma=0.020274
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028804Jy  sigma=0.020274
! Fit after  self-cal, rms=0.028946Jy  sigma=0.020243
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.181 mas, bmaj=16.39 mas, bpa=19.17 degrees
! Estimated noise=31.7898 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000234636 Jy
! Component: 100  -  total flux cleaned = -0.000154539 Jy
! Component: 150  -  total flux cleaned = -0.000228209 Jy
! Component: 200  -  total flux cleaned = -0.00031954 Jy
! Total flux subtracted in 200 components = -0.00031954 Jy
! Clean residual min=-0.000300 max=0.000304 Jy/beam
! Clean residual mean=0.000000 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.0224786 Jy
selfcal
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 406 components and 0.0224786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028922Jy  sigma=0.020228
! Fit after  self-cal, rms=0.028942Jy  sigma=0.020223
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000213158 Jy
! Component: 100  -  total flux cleaned = -0.000359173 Jy
! Component: 150  -  total flux cleaned = -0.000438235 Jy
! Component: 200  -  total flux cleaned = -0.000548299 Jy
! Total flux subtracted in 200 components = -0.000548299 Jy
! Clean residual min=-0.000263 max=0.000263 Jy/beam
! Clean residual mean=-0.000001 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.0219303 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 457 components and 0.0219303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028926Jy  sigma=0.020213
! Fit after  self-cal, rms=0.028924Jy  sigma=0.020211
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028924Jy  sigma=0.020211
! Fit after  self-cal, rms=0.028968Jy  sigma=0.020208
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.288 mas, bmaj=16.33 mas, bpa=19.02 degrees
! Estimated noise=31.7921 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.48509e-05 Jy
! Component: 100  -  total flux cleaned = -0.000251662 Jy
! Component: 150  -  total flux cleaned = -0.000342459 Jy
! Component: 200  -  total flux cleaned = -0.000446745 Jy
! Total flux subtracted in 200 components = -0.000446745 Jy
! Clean residual min=-0.000248 max=0.000244 Jy/beam
! Clean residual mean=0.000001 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.0214836 Jy
selfcal
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 506 components and 0.0214836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028952Jy  sigma=0.020199
! Fit after  self-cal, rms=0.028961Jy  sigma=0.020197
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000146088 Jy
! Component: 100  -  total flux cleaned = -0.000256577 Jy
! Component: 150  -  total flux cleaned = -0.000349652 Jy
! Component: 200  -  total flux cleaned = -0.000455962 Jy
! Total flux subtracted in 200 components = -0.000455962 Jy
! Clean residual min=-0.000221 max=0.000222 Jy/beam
! Clean residual mean=-0.000001 rms=0.000087 Jy/beam
! Combined flux in latest and established models = 0.0210276 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 539 components and 0.0210276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028949Jy  sigma=0.020190
! Fit after  self-cal, rms=0.028947Jy  sigma=0.020189
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.171 mas, bmaj=16.4 mas, bpa=19.21 degrees
! Estimated noise=31.76 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.171 x 16.4 at 19.21 degrees (North through East)
! Clean map  min=-0.0033948  max=0.024644 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.673 mas, bmaj=17.06 mas, bpa=20.36 degrees
! Estimated noise=39.0545 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0238285 Jy
! Component: 100  -  total flux cleaned = 0.0241897 Jy
! Component: 150  -  total flux cleaned = 0.020912 Jy
! Component: 200  -  total flux cleaned = 0.0180352 Jy
! Total flux subtracted in 200 components = 0.0180352 Jy
! Clean residual min=-0.001912 max=0.001914 Jy/beam
! Clean residual mean=-0.000058 rms=0.000778 Jy/beam
! Combined flux in latest and established models = 0.0180352 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 82 model components to the UV plane model.
! The established model now contains 82 components and 0.0180352 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.171 mas, bmaj=16.4 mas, bpa=19.21 degrees
! Estimated noise=31.76 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00044519 Jy
! Component: 100  -  total flux cleaned = -0.000483514 Jy
! Component: 150  -  total flux cleaned = -0.00158839 Jy
! Component: 200  -  total flux cleaned = -0.00269583 Jy
! Total flux subtracted in 200 components = -0.00269583 Jy
! Clean residual min=-0.000928 max=0.000938 Jy/beam
! Clean residual mean=-0.000020 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.0153394 Jy
! Adding 100 model components to the UV plane model.
! The established model now contains 180 components and 0.0153394 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.288 mas, bmaj=16.33 mas, bpa=19.02 degrees
! Estimated noise=31.7921 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.31802e-05 Jy
! Component: 100  -  total flux cleaned = -0.000219348 Jy
! Component: 150  -  total flux cleaned = -0.000511525 Jy
! Component: 200  -  total flux cleaned = -0.000873758 Jy
! Total flux subtracted in 200 components = -0.000873758 Jy
! Clean residual min=-0.000457 max=0.000453 Jy/beam
! Clean residual mean=-0.000005 rms=0.000180 Jy/beam
! Combined flux in latest and established models = 0.0144657 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000381044 Jy
! Component: 100  -  total flux cleaned = -0.000761073 Jy
! Component: 150  -  total flux cleaned = -0.00106345 Jy
! Component: 200  -  total flux cleaned = -0.0013468 Jy
! Total flux subtracted in 200 components = -0.0013468 Jy
! Clean residual min=-0.000478 max=0.000481 Jy/beam
! Clean residual mean=-0.000009 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0131189 Jy
! Adding 160 model components to the UV plane model.
! The established model now contains 335 components and 0.0131189 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.171 mas, bmaj=16.4 mas, bpa=19.21 degrees
! Estimated noise=31.76 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000271232 Jy
! Component: 100  -  total flux cleaned = 0.000307129 Jy
! Component: 150  -  total flux cleaned = 0.00026087 Jy
! Component: 200  -  total flux cleaned = 0.000215543 Jy
! Total flux subtracted in 200 components = 0.000215543 Jy
! Clean residual min=-0.000249 max=0.000249 Jy/beam
! Clean residual mean=0.000001 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.0133344 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 391 components and 0.0133344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028959Jy  sigma=0.020199
! Fit after  self-cal, rms=0.028957Jy  sigma=0.020197
wmodel /d2/scr/pima/bp171aa_uvs/J1043-3400_X_map.mod
! Writing 391 model components to file: /d2/scr/pima/bp171aa_uvs/J1043-3400_X_map.mod
wobs /d2/scr/pima/bp171aa_uvs/J1043-3400_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171aa_uvs/J1043-3400_X_uvs.fits
wwins /d2/scr/pima/bp171aa_uvs/J1043-3400_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp171aa_uvs/J1043-3400_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.171 x 16.4 at 19.21 degrees (North through East)
! Clean map  min=-0.0039459  max=0.023314 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171aa_uvs/J1043-3400_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0233135 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.65999e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.11437 1.11437 2.22875 4.4575 8.91499 17.83 35.66 71.3199
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.023 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  269.209 
quit
! Quitting program
! Log file /d2/scr/pima/bp171aa_uvs/J1043-3400_X_uvs.log closed on Thu Nov 28 23:34:22 2013