! Started logfile: /d2/scr/pima/bp171aa_uvs/J0804-1038_X_uvs.log on Thu Nov 28 23:31:53 2013
obs /d2/scr/pima/bp171aa_uvs/J0804-1038_X_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171aa_uvs/J0804-1038_X_uva.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.806944 visibilities/baseline/integration-bin.
! Found source: J0804-1038
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4648 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171aa_uvs/J0804-1038_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003443Jy  sigma=0.709376
! Fit after  self-cal, rms=0.940080Jy  sigma=0.664585
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8571 mas, bmaj=2.023 mas, bpa=6.13 degrees
! Estimated noise=21.5736 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0382082 Jy
! Component: 100  -  total flux cleaned = 0.054538 Jy
! Total flux subtracted in 100 components = 0.054538 Jy
! Clean residual min=-0.004056 max=0.008417 Jy/beam
! Clean residual mean=-0.000005 rms=0.001258 Jy/beam
! Combined flux in latest and established models = 0.054538 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.054538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038302Jy  sigma=0.027068
! Fit after  self-cal, rms=0.038139Jy  sigma=0.026953
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102635 Jy
! Component: 100  -  total flux cleaned = 0.0166306 Jy
! Total flux subtracted in 100 components = 0.0166306 Jy
! Clean residual min=-0.002422 max=0.003396 Jy/beam
! Clean residual mean=-0.000004 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.0711686 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 0.0711686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032986Jy  sigma=0.023309
! Fit after  self-cal, rms=0.032972Jy  sigma=0.023300
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.063 mas, bmaj=2.534 mas, bpa=8.371 degrees
! Estimated noise=14.6713 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00761934 Jy
! Component: 100  -  total flux cleaned = 0.0117672 Jy
! Component: 150  -  total flux cleaned = 0.0142574 Jy
! Component: 200  -  total flux cleaned = 0.0158046 Jy
! Total flux subtracted in 200 components = 0.0158046 Jy
! Clean residual min=-0.003123 max=0.003828 Jy/beam
! Clean residual mean=-0.000007 rms=0.001045 Jy/beam
! Combined flux in latest and established models = 0.0869732 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 50 components and 0.0869732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031195Jy  sigma=0.022043
! Fit after  self-cal, rms=0.031186Jy  sigma=0.022037
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.063 x 2.534 at 8.371 degrees (North through East)
! Clean map  min=-0.0030304  max=0.057752 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.04     HN        0.93     KP        0.91     
!   LA        0.92     MK        1.04     NL        1.10     OV        1.03     
!   PT        0.87     SC        0.87     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.14     HN        0.98     KP        1.01     
!   LA        0.85     MK        1.14     NL        1.07     OV        1.13     
!   PT        0.86     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.11     HN        1.04     KP        0.89     
!   LA        0.92     MK        1.09     NL        1.08     OV        1.14     
!   PT        0.86     SC        1.05     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        1.09     KP        1.05     
!   LA        0.91     MK        1.10     NL        1.02     OV        1.05     
!   PT        0.86     SC        1.04     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.05     HN        1.01     KP        1.02     
!   LA        0.89     MK        0.98     NL        1.09     OV        1.07     
!   PT        0.87     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.031186Jy  sigma=0.022037
! Fit after  self-cal, rms=0.030633Jy  sigma=0.021509
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.066 mas, bmaj=2.565 mas, bpa=8.525 degrees
! Estimated noise=14.6311 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000375219 Jy
! Component: 100  -  total flux cleaned = -0.00025902 Jy
! Component: 150  -  total flux cleaned = -0.000192125 Jy
! Component: 200  -  total flux cleaned = -0.000147269 Jy
! Total flux subtracted in 200 components = -0.000147269 Jy
! Clean residual min=-0.002131 max=0.002863 Jy/beam
! Clean residual mean=-0.000004 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.086826 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 51 components and 0.086826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030611Jy  sigma=0.021491
! Fit after  self-cal, rms=0.030634Jy  sigma=0.021484
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030634Jy  sigma=0.021484
! Fit after  self-cal, rms=0.030609Jy  sigma=0.021381
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.063 mas, bmaj=2.559 mas, bpa=8.669 degrees
! Estimated noise=14.618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119146 Jy
! Component: 100  -  total flux cleaned = 0.000158608 Jy
! Component: 150  -  total flux cleaned = 0.000193175 Jy
! Component: 200  -  total flux cleaned = 0.000223693 Jy
! Total flux subtracted in 200 components = 0.000223693 Jy
! Clean residual min=-0.001981 max=0.002739 Jy/beam
! Clean residual mean=-0.000004 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.0870497 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 52 components and 0.0870496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030601Jy  sigma=0.021375
! Fit after  self-cal, rms=0.030607Jy  sigma=0.021372
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, -4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238982 Jy
! Component: 100  -  total flux cleaned = 0.00359424 Jy
! Component: 150  -  total flux cleaned = 0.00418072 Jy
! Component: 200  -  total flux cleaned = 0.00451973 Jy
! Total flux subtracted in 200 components = 0.00451973 Jy
! Clean residual min=-0.001795 max=0.002269 Jy/beam
! Clean residual mean=-0.000002 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.0915694 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 95 components and 0.0915694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030409Jy  sigma=0.021237
! Fit after  self-cal, rms=0.030400Jy  sigma=0.021228
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030400Jy  sigma=0.021228
! Fit after  self-cal, rms=0.030104Jy  sigma=0.021229
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.061 mas, bmaj=2.551 mas, bpa=8.634 degrees
! Estimated noise=14.502 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000796384 Jy
! Component: 100  -  total flux cleaned = 0.00110203 Jy
! Component: 150  -  total flux cleaned = 0.00130049 Jy
! Component: 200  -  total flux cleaned = 0.00149258 Jy
! Total flux subtracted in 200 components = 0.00149258 Jy
! Clean residual min=-0.001815 max=0.002254 Jy/beam
! Clean residual mean=-0.000002 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.0930619 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 114 components and 0.0930619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030072Jy  sigma=0.021207
! Fit after  self-cal, rms=0.030071Jy  sigma=0.021206
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11.8, 10.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210459 Jy
! Component: 100  -  total flux cleaned = 0.00318845 Jy
! Component: 150  -  total flux cleaned = 0.00391826 Jy
! Component: 200  -  total flux cleaned = 0.00451924 Jy
! Total flux subtracted in 200 components = 0.00451924 Jy
! Clean residual min=-0.001586 max=0.001929 Jy/beam
! Clean residual mean=-0.000000 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.0975812 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 144 components and 0.0975812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029922Jy  sigma=0.021094
! Fit after  self-cal, rms=0.029910Jy  sigma=0.021087
! Inverting map 
! Added new window around map position (-13.8, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170954 Jy
! Component: 100  -  total flux cleaned = 0.00267492 Jy
! Component: 150  -  total flux cleaned = 0.00341705 Jy
! Component: 200  -  total flux cleaned = 0.00403206 Jy
! Total flux subtracted in 200 components = 0.00403206 Jy
! Clean residual min=-0.001415 max=0.001266 Jy/beam
! Clean residual mean=0.000001 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.101613 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 176 components and 0.101613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029796Jy  sigma=0.021008
! Fit after  self-cal, rms=0.029784Jy  sigma=0.021000
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029784Jy  sigma=0.021000
! Fit after  self-cal, rms=0.029377Jy  sigma=0.020836
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.09 mas, bmaj=4.188 mas, bpa=4.861 degrees
! Estimated noise=17.8112 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120491 Jy
! Component: 100  -  total flux cleaned = 0.00199063 Jy
! Component: 150  -  total flux cleaned = 0.00259902 Jy
! Component: 200  -  total flux cleaned = 0.00307409 Jy
! Total flux subtracted in 200 components = 0.00307409 Jy
! Clean residual min=-0.001442 max=0.001185 Jy/beam
! Clean residual mean=0.000003 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.104687 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 220 components and 0.104687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029348Jy  sigma=0.020816
! Fit after  self-cal, rms=0.029349Jy  sigma=0.020811
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00054141 Jy
! Component: 100  -  total flux cleaned = 0.000776249 Jy
! Component: 150  -  total flux cleaned = 0.000987254 Jy
! Component: 200  -  total flux cleaned = 0.00117124 Jy
! Total flux subtracted in 200 components = 0.00117124 Jy
! Clean residual min=-0.001305 max=0.001165 Jy/beam
! Clean residual mean=0.000004 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.105859 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 259 components and 0.105859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029340Jy  sigma=0.020805
! Fit after  self-cal, rms=0.029340Jy  sigma=0.020804
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.058 mas, bmaj=2.551 mas, bpa=8.991 degrees
! Estimated noise=14.4181 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.058 x 2.551 at 8.991 degrees (North through East)
! Clean map  min=-0.0011041  max=0.056671 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8549 mas, bmaj=2.029 mas, bpa=7.029 degrees
! Estimated noise=21.3073 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0376922 Jy
! Component: 100  -  total flux cleaned = 0.0540593 Jy
! Component: 150  -  total flux cleaned = 0.0641323 Jy
! Component: 200  -  total flux cleaned = 0.0704163 Jy
! Total flux subtracted in 200 components = 0.0704163 Jy
! Clean residual min=-0.002571 max=0.003290 Jy/beam
! Clean residual mean=-0.000003 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.0704163 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0704163 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.058 mas, bmaj=2.551 mas, bpa=8.991 degrees
! Estimated noise=14.4181 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00715522 Jy
! Component: 100  -  total flux cleaned = 0.0111293 Jy
! Component: 150  -  total flux cleaned = 0.0141781 Jy
! Component: 200  -  total flux cleaned = 0.0166943 Jy
! Total flux subtracted in 200 components = 0.0166943 Jy
! Clean residual min=-0.001784 max=0.002073 Jy/beam
! Clean residual mean=-0.000003 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.0871106 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 67 components and 0.0871106 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.09 mas, bmaj=4.188 mas, bpa=4.861 degrees
! Estimated noise=17.8112 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00354951 Jy
! Component: 100  -  total flux cleaned = 0.00618094 Jy
! Component: 150  -  total flux cleaned = 0.00825834 Jy
! Component: 200  -  total flux cleaned = 0.00995047 Jy
! Total flux subtracted in 200 components = 0.00995047 Jy
! Clean residual min=-0.001748 max=0.001773 Jy/beam
! Clean residual mean=-0.000001 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.0970611 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140569 Jy
! Component: 100  -  total flux cleaned = 0.00259419 Jy
! Component: 150  -  total flux cleaned = 0.00360942 Jy
! Component: 200  -  total flux cleaned = 0.00448074 Jy
! Total flux subtracted in 200 components = 0.00448074 Jy
! Clean residual min=-0.001475 max=0.001286 Jy/beam
! Clean residual mean=0.000002 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.101542 Jy
! Adding 111 model components to the UV plane model.
! The established model now contains 171 components and 0.101542 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.058 mas, bmaj=2.551 mas, bpa=8.991 degrees
! Estimated noise=14.4181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00084753 Jy
! Component: 100  -  total flux cleaned = 0.00151528 Jy
! Component: 150  -  total flux cleaned = 0.00196733 Jy
! Component: 200  -  total flux cleaned = 0.0022645 Jy
! Total flux subtracted in 200 components = 0.0022645 Jy
! Clean residual min=-0.001273 max=0.001241 Jy/beam
! Clean residual mean=0.000002 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.103806 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 197 components and 0.103806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029355Jy  sigma=0.020814
! Fit after  self-cal, rms=0.029344Jy  sigma=0.020808
wmodel /d2/scr/pima/bp171aa_uvs/J0804-1038_X_map.mod
! Writing 197 model components to file: /d2/scr/pima/bp171aa_uvs/J0804-1038_X_map.mod
wobs /d2/scr/pima/bp171aa_uvs/J0804-1038_X_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171aa_uvs/J0804-1038_X_uvs.fits
wwins /d2/scr/pima/bp171aa_uvs/J0804-1038_X_map.win
! wwins: Wrote 4 windows to /d2/scr/pima/bp171aa_uvs/J0804-1038_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -6.45045e-05 Jy
! Component: 100  -  total flux cleaned = -0.000227481 Jy
! Component: 150  -  total flux cleaned = -0.000302047 Jy
! Component: 200  -  total flux cleaned = -0.00044435 Jy
! Component: 250  -  total flux cleaned = -0.000495098 Jy
! Component: 300  -  total flux cleaned = -0.000511361 Jy
! Component: 350  -  total flux cleaned = -0.00051171 Jy
! Component: 400  -  total flux cleaned = -0.000511679 Jy
! Component: 450  -  total flux cleaned = -0.00051167 Jy
! Component: 500  -  total flux cleaned = -0.000497495 Jy
! Component: 550  -  total flux cleaned = -0.000470105 Jy
! Component: 600  -  total flux cleaned = -0.000430925 Jy
! Component: 650  -  total flux cleaned = -0.000482431 Jy
! Component: 700  -  total flux cleaned = -0.000494515 Jy
! Component: 750  -  total flux cleaned = -0.000494563 Jy
! Component: 800  -  total flux cleaned = -0.000494593 Jy
! Component: 850  -  total flux cleaned = -0.000494433 Jy
! Component: 900  -  total flux cleaned = -0.000459974 Jy
! Component: 950  -  total flux cleaned = -0.000482595 Jy
! Component: 1000  -  total flux cleaned = -0.000504565 Jy
! Component: 1050  -  total flux cleaned = -0.000493722 Jy
! Component: 1100  -  total flux cleaned = -0.000504155 Jy
! Component: 1150  -  total flux cleaned = -0.000472853 Jy
! Component: 1200  -  total flux cleaned = -0.00045238 Jy
! Component: 1250  -  total flux cleaned = -0.000442222 Jy
! Component: 1300  -  total flux cleaned = -0.000412529 Jy
! Component: 1350  -  total flux cleaned = -0.000402782 Jy
! Component: 1400  -  total flux cleaned = -0.000374104 Jy
! Component: 1450  -  total flux cleaned = -0.000373946 Jy
! Component: 1500  -  total flux cleaned = -0.000364706 Jy
! Component: 1550  -  total flux cleaned = -0.000355362 Jy
! Component: 1600  -  total flux cleaned = -0.000310493 Jy
! Component: 1650  -  total flux cleaned = -0.00030147 Jy
! Component: 1700  -  total flux cleaned = -0.000257795 Jy
! Component: 1750  -  total flux cleaned = -0.000257727 Jy
! Component: 1800  -  total flux cleaned = -0.000223694 Jy
! Component: 1850  -  total flux cleaned = -0.000207143 Jy
! Component: 1900  -  total flux cleaned = -0.000198894 Jy
! Component: 1950  -  total flux cleaned = -0.000190576 Jy
! Component: 2000  -  total flux cleaned = -0.000182465 Jy
! Component: 2050  -  total flux cleaned = -0.000166439 Jy
! Component: 2100  -  total flux cleaned = -0.000150655 Jy
! Component: 2150  -  total flux cleaned = -0.000150726 Jy
! Component: 2200  -  total flux cleaned = -0.000143007 Jy
! Component: 2250  -  total flux cleaned = -0.000143167 Jy
! Component: 2300  -  total flux cleaned = -0.000128162 Jy
! Component: 2350  -  total flux cleaned = -0.000120838 Jy
! Component: 2400  -  total flux cleaned = -0.000128096 Jy
! Component: 2450  -  total flux cleaned = -9.2071e-05 Jy
! Component: 2500  -  total flux cleaned = -9.91997e-05 Jy
! Component: 2550  -  total flux cleaned = -8.52051e-05 Jy
! Component: 2600  -  total flux cleaned = -7.82545e-05 Jy
! Component: 2650  -  total flux cleaned = -4.36907e-05 Jy
! Component: 2700  -  total flux cleaned = -1.64425e-05 Jy
! Component: 2750  -  total flux cleaned = -1.64085e-05 Jy
! Component: 2800  -  total flux cleaned = 3.72241e-06 Jy
! Component: 2850  -  total flux cleaned = 2.37128e-05 Jy
! Component: 2900  -  total flux cleaned = 5.66726e-05 Jy
! Component: 2950  -  total flux cleaned = 7.61818e-05 Jy
! Component: 3000  -  total flux cleaned = 8.9194e-05 Jy
! Component: 3050  -  total flux cleaned = 0.000127746 Jy
! Component: 3100  -  total flux cleaned = 0.000127764 Jy
! Component: 3150  -  total flux cleaned = 0.000153172 Jy
! Component: 3200  -  total flux cleaned = 0.000178349 Jy
! Component: 3250  -  total flux cleaned = 0.000190893 Jy
! Component: 3300  -  total flux cleaned = 0.000234288 Jy
! Component: 3350  -  total flux cleaned = 0.00024041 Jy
! Component: 3400  -  total flux cleaned = 0.000246485 Jy
! Component: 3450  -  total flux cleaned = 0.000252566 Jy
! Component: 3500  -  total flux cleaned = 0.000270728 Jy
! Component: 3550  -  total flux cleaned = 0.000300741 Jy
! Component: 3600  -  total flux cleaned = 0.000342411 Jy
! Component: 3650  -  total flux cleaned = 0.000348281 Jy
! Component: 3700  -  total flux cleaned = 0.000360065 Jy
! Component: 3750  -  total flux cleaned = 0.000377614 Jy
! Component: 3800  -  total flux cleaned = 0.000395103 Jy
! Component: 3850  -  total flux cleaned = 0.000412455 Jy
! Component: 3900  -  total flux cleaned = 0.000423917 Jy
! Component: 3950  -  total flux cleaned = 0.000458214 Jy
! Component: 4000  -  total flux cleaned = 0.000475285 Jy
! Component: 4050  -  total flux cleaned = 0.000480938 Jy
! Total flux subtracted in 4096 components = 0.000492195 Jy
! Clean residual min=-0.000337 max=0.000335 Jy/beam
! Clean residual mean=0.000001 rms=0.000097 Jy/beam
! Combined flux in latest and established models = 0.104298 Jy
keep
! Adding 273 model components to the UV plane model.
! The established model now contains 470 components and 0.104299 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp171aa_uvs/J0804-1038_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.058 x 2.551 at 8.991 degrees (North through East)
! Clean map  min=-0.00074523  max=0.057136 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171aa_uvs/J0804-1038_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0571355 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.44376e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.495861 0.495861 0.991722 1.98344 3.96689 7.93378 15.8676 31.7351 63.4702
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.057 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  605.008 
quit
! Quitting program
! Log file /d2/scr/pima/bp171aa_uvs/J0804-1038_X_uvs.log closed on Thu Nov 28 23:31:59 2013