! Started logfile: /d2/scr/pima/bp171aa_uvs/J0804-1038_C_uvs.log on Thu Nov 28 23:32:07 2013
obs /d2/scr/pima/bp171aa_uvs/J0804-1038_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171aa_uvs/J0804-1038_C_uva.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.844444 visibilities/baseline/integration-bin.
! Found source: J0804-1038
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4864 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171aa_uvs/J0804-1038_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016782Jy  sigma=0.718802
! Fit after  self-cal, rms=0.898259Jy  sigma=0.635022
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.273 mas, bmaj=3.451 mas, bpa=-1.822 degrees
! Estimated noise=19.7143 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0692114 Jy
! Component: 100  -  total flux cleaned = 0.0931219 Jy
! Total flux subtracted in 100 components = 0.0931219 Jy
! Clean residual min=-0.005003 max=0.011203 Jy/beam
! Clean residual mean=0.000006 rms=0.001548 Jy/beam
! Combined flux in latest and established models = 0.0931219 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0931219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045513Jy  sigma=0.032167
! Fit after  self-cal, rms=0.045486Jy  sigma=0.032148
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127682 Jy
! Component: 100  -  total flux cleaned = 0.0202228 Jy
! Total flux subtracted in 100 components = 0.0202228 Jy
! Clean residual min=-0.003469 max=0.005685 Jy/beam
! Clean residual mean=0.000006 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.113345 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 21 components and 0.113345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039644Jy  sigma=0.028018
! Fit after  self-cal, rms=0.039636Jy  sigma=0.028012
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.658 mas, bmaj=4.158 mas, bpa=3.144 degrees
! Estimated noise=14.3418 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00772938 Jy
! Component: 100  -  total flux cleaned = 0.0116254 Jy
! Component: 150  -  total flux cleaned = 0.0137501 Jy
! Component: 200  -  total flux cleaned = 0.0149254 Jy
! Total flux subtracted in 200 components = 0.0149254 Jy
! Clean residual min=-0.005114 max=0.006939 Jy/beam
! Clean residual mean=0.000013 rms=0.001637 Jy/beam
! Combined flux in latest and established models = 0.12827 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 35 components and 0.12827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038208Jy  sigma=0.027003
! Fit after  self-cal, rms=0.038202Jy  sigma=0.026999
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.658 x 4.158 at 3.144 degrees (North through East)
! Clean map  min=-0.0049592  max=0.098896 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.19     HN        1.01     KP        0.92     
!   LA        1.07     MK        1.06     NL        1.05     OV        1.19     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.14     HN        1.04     KP        0.93     
!   LA        1.01     MK        1.20     NL        0.97     OV        1.03     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        0.97     KP        0.94     
!   LA        1.04     MK        1.07     NL        0.99     OV        1.06     
!   PT        0.94     SC        0.93     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        1.03     HN        0.99     KP        0.98     
!   LA        1.05     MK        1.08     NL        0.99     OV        1.07     
!   PT        0.90     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.038202Jy  sigma=0.026999
! Fit after  self-cal, rms=0.038183Jy  sigma=0.026489
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.659 mas, bmaj=4.182 mas, bpa=3.465 degrees
! Estimated noise=14.649 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180302 Jy
! Component: 100  -  total flux cleaned = 0.00266213 Jy
! Component: 150  -  total flux cleaned = 0.00309284 Jy
! Component: 200  -  total flux cleaned = 0.00318033 Jy
! Total flux subtracted in 200 components = 0.00318033 Jy
! Clean residual min=-0.004292 max=0.006509 Jy/beam
! Clean residual mean=0.000013 rms=0.001464 Jy/beam
! Combined flux in latest and established models = 0.13145 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 41 components and 0.13145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038109Jy  sigma=0.026433
! Fit after  self-cal, rms=0.038120Jy  sigma=0.026429
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038120Jy  sigma=0.026429
! Fit after  self-cal, rms=0.038298Jy  sigma=0.026410
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.655 mas, bmaj=4.173 mas, bpa=3.489 degrees
! Estimated noise=14.7535 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000964372 Jy
! Component: 100  -  total flux cleaned = 0.00143736 Jy
! Component: 150  -  total flux cleaned = 0.00156289 Jy
! Component: 200  -  total flux cleaned = 0.00158219 Jy
! Total flux subtracted in 200 components = 0.00158219 Jy
! Clean residual min=-0.004352 max=0.006551 Jy/beam
! Clean residual mean=0.000013 rms=0.001475 Jy/beam
! Combined flux in latest and established models = 0.133033 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 0.133033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038276Jy  sigma=0.026393
! Fit after  self-cal, rms=0.038275Jy  sigma=0.026392
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.6, 5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00620277 Jy
! Component: 100  -  total flux cleaned = 0.00976557 Jy
! Component: 150  -  total flux cleaned = 0.0121774 Jy
! Component: 200  -  total flux cleaned = 0.0135642 Jy
! Total flux subtracted in 200 components = 0.0135642 Jy
! Clean residual min=-0.003773 max=0.004817 Jy/beam
! Clean residual mean=0.000008 rms=0.001217 Jy/beam
! Combined flux in latest and established models = 0.146597 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 87 components and 0.146597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037191Jy  sigma=0.025638
! Fit after  self-cal, rms=0.037119Jy  sigma=0.025585
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037119Jy  sigma=0.025585
! Fit after  self-cal, rms=0.037145Jy  sigma=0.025166
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.655 mas, bmaj=4.182 mas, bpa=3.487 degrees
! Estimated noise=15.082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00324962 Jy
! Component: 100  -  total flux cleaned = 0.00535815 Jy
! Component: 150  -  total flux cleaned = 0.00689925 Jy
! Component: 200  -  total flux cleaned = 0.00805809 Jy
! Total flux subtracted in 200 components = 0.00805809 Jy
! Clean residual min=-0.003366 max=0.004337 Jy/beam
! Clean residual mean=0.000010 rms=0.001121 Jy/beam
! Combined flux in latest and established models = 0.154655 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 113 components and 0.154655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036808Jy  sigma=0.024934
! Fit after  self-cal, rms=0.036789Jy  sigma=0.024914
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126114 Jy
! Component: 100  -  total flux cleaned = 0.00211445 Jy
! Component: 150  -  total flux cleaned = 0.00274764 Jy
! Component: 200  -  total flux cleaned = 0.00324181 Jy
! Total flux subtracted in 200 components = 0.00324181 Jy
! Clean residual min=-0.003288 max=0.004505 Jy/beam
! Clean residual mean=0.000008 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 0.157897 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 137 components and 0.157897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036736Jy  sigma=0.024877
! Fit after  self-cal, rms=0.036734Jy  sigma=0.024873
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036734Jy  sigma=0.024873
! Fit after  self-cal, rms=0.037201Jy  sigma=0.024737
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.595 mas, bmaj=7.271 mas, bpa=4.247 degrees
! Estimated noise=19.5346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0031153 Jy
! Component: 100  -  total flux cleaned = 0.00485753 Jy
! Component: 150  -  total flux cleaned = 0.00597878 Jy
! Component: 200  -  total flux cleaned = 0.00672815 Jy
! Total flux subtracted in 200 components = 0.00672815 Jy
! Clean residual min=-0.005324 max=0.008477 Jy/beam
! Clean residual mean=0.000014 rms=0.002011 Jy/beam
! Combined flux in latest and established models = 0.164625 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 147 components and 0.164625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037143Jy  sigma=0.024684
! Fit after  self-cal, rms=0.037132Jy  sigma=0.024674
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000646516 Jy
! Component: 100  -  total flux cleaned = 0.000774825 Jy
! Component: 150  -  total flux cleaned = 0.000853183 Jy
! Component: 200  -  total flux cleaned = 0.000909555 Jy
! Total flux subtracted in 200 components = 0.000909555 Jy
! Clean residual min=-0.005384 max=0.008319 Jy/beam
! Clean residual mean=0.000013 rms=0.001992 Jy/beam
! Combined flux in latest and established models = 0.165534 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 154 components and 0.165534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037163Jy  sigma=0.024694
! Fit after  self-cal, rms=0.037162Jy  sigma=0.024692
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.653 mas, bmaj=4.181 mas, bpa=3.443 degrees
! Estimated noise=15.3499 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.653 x 4.181 at 3.443 degrees (North through East)
! Clean map  min=-0.0033847  max=0.10331 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.277 mas, bmaj=3.463 mas, bpa=-1.384 degrees
! Estimated noise=21.176 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0741225 Jy
! Component: 100  -  total flux cleaned = 0.0997703 Jy
! Component: 150  -  total flux cleaned = 0.113501 Jy
! Component: 200  -  total flux cleaned = 0.12174 Jy
! Total flux subtracted in 200 components = 0.12174 Jy
! Clean residual min=-0.003401 max=0.004874 Jy/beam
! Clean residual mean=0.000006 rms=0.001060 Jy/beam
! Combined flux in latest and established models = 0.12174 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.12174 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.653 mas, bmaj=4.181 mas, bpa=3.443 degrees
! Estimated noise=15.3499 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010068 Jy
! Component: 100  -  total flux cleaned = 0.017185 Jy
! Component: 150  -  total flux cleaned = 0.0225396 Jy
! Component: 200  -  total flux cleaned = 0.0266725 Jy
! Total flux subtracted in 200 components = 0.0266725 Jy
! Clean residual min=-0.003981 max=0.004527 Jy/beam
! Clean residual mean=0.000013 rms=0.001271 Jy/beam
! Combined flux in latest and established models = 0.148412 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 86 components and 0.148412 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.595 mas, bmaj=7.271 mas, bpa=4.247 degrees
! Estimated noise=19.5346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00587723 Jy
! Component: 100  -  total flux cleaned = 0.00944125 Jy
! Component: 150  -  total flux cleaned = 0.011862 Jy
! Component: 200  -  total flux cleaned = 0.0135712 Jy
! Total flux subtracted in 200 components = 0.0135712 Jy
! Clean residual min=-0.005589 max=0.008332 Jy/beam
! Clean residual mean=0.000015 rms=0.002023 Jy/beam
! Combined flux in latest and established models = 0.161983 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122355 Jy
! Component: 100  -  total flux cleaned = 0.00210461 Jy
! Component: 150  -  total flux cleaned = 0.0026289 Jy
! Component: 200  -  total flux cleaned = 0.00284661 Jy
! Total flux subtracted in 200 components = 0.00284661 Jy
! Clean residual min=-0.005446 max=0.008365 Jy/beam
! Clean residual mean=0.000013 rms=0.001992 Jy/beam
! Combined flux in latest and established models = 0.16483 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 145 components and 0.16483 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.653 mas, bmaj=4.181 mas, bpa=3.443 degrees
! Estimated noise=15.3499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00114187 Jy
! Component: 100  -  total flux cleaned = -0.000824587 Jy
! Component: 150  -  total flux cleaned = -0.000646965 Jy
! Component: 200  -  total flux cleaned = -0.000607306 Jy
! Total flux subtracted in 200 components = -0.000607306 Jy
! Clean residual min=-0.003583 max=0.004779 Jy/beam
! Clean residual mean=0.000007 rms=0.001110 Jy/beam
! Combined flux in latest and established models = 0.164223 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 158 components and 0.164223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037174Jy  sigma=0.024703
! Fit after  self-cal, rms=0.037163Jy  sigma=0.024696
wmodel /d2/scr/pima/bp171aa_uvs/J0804-1038_C_map.mod
! Writing 158 model components to file: /d2/scr/pima/bp171aa_uvs/J0804-1038_C_map.mod
wobs /d2/scr/pima/bp171aa_uvs/J0804-1038_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171aa_uvs/J0804-1038_C_uvs.fits
wwins /d2/scr/pima/bp171aa_uvs/J0804-1038_C_map.win
! wwins: Wrote 2 windows to /d2/scr/pima/bp171aa_uvs/J0804-1038_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204504 Jy
! Component: 100  -  total flux cleaned = 0.00339571 Jy
! Component: 150  -  total flux cleaned = 0.0044304 Jy
! Component: 200  -  total flux cleaned = 0.00515361 Jy
! Component: 250  -  total flux cleaned = 0.00589323 Jy
! Component: 300  -  total flux cleaned = 0.00659269 Jy
! Component: 350  -  total flux cleaned = 0.00695162 Jy
! Component: 400  -  total flux cleaned = 0.00719749 Jy
! Component: 450  -  total flux cleaned = 0.00747894 Jy
! Component: 500  -  total flux cleaned = 0.00761457 Jy
! Component: 550  -  total flux cleaned = 0.00787648 Jy
! Component: 600  -  total flux cleaned = 0.00816962 Jy
! Component: 650  -  total flux cleaned = 0.00845208 Jy
! Component: 700  -  total flux cleaned = 0.00864757 Jy
! Component: 750  -  total flux cleaned = 0.00887375 Jy
! Component: 800  -  total flux cleaned = 0.00905626 Jy
! Component: 850  -  total flux cleaned = 0.0092322 Jy
! Component: 900  -  total flux cleaned = 0.00930024 Jy
! Component: 950  -  total flux cleaned = 0.0093005 Jy
! Component: 1000  -  total flux cleaned = 0.00939732 Jy
! Component: 1050  -  total flux cleaned = 0.00942868 Jy
! Component: 1100  -  total flux cleaned = 0.00955094 Jy
! Component: 1150  -  total flux cleaned = 0.00952096 Jy
! Component: 1200  -  total flux cleaned = 0.00960851 Jy
! Component: 1250  -  total flux cleaned = 0.00960792 Jy
! Component: 1300  -  total flux cleaned = 0.00957978 Jy
! Component: 1350  -  total flux cleaned = 0.00957983 Jy
! Component: 1400  -  total flux cleaned = 0.00955392 Jy
! Component: 1450  -  total flux cleaned = 0.00955435 Jy
! Component: 1500  -  total flux cleaned = 0.00960552 Jy
! Component: 1550  -  total flux cleaned = 0.00967999 Jy
! Component: 1600  -  total flux cleaned = 0.0097283 Jy
! Component: 1650  -  total flux cleaned = 0.00975164 Jy
! Component: 1700  -  total flux cleaned = 0.00970519 Jy
! Component: 1750  -  total flux cleaned = 0.0097514 Jy
! Component: 1800  -  total flux cleaned = 0.00977378 Jy
! Component: 1850  -  total flux cleaned = 0.0098178 Jy
! Component: 1900  -  total flux cleaned = 0.00988246 Jy
! Component: 1950  -  total flux cleaned = 0.00977548 Jy
! Component: 2000  -  total flux cleaned = 0.00985962 Jy
! Component: 2050  -  total flux cleaned = 0.00988019 Jy
! Component: 2100  -  total flux cleaned = 0.00990021 Jy
! Component: 2150  -  total flux cleaned = 0.00986024 Jy
! Component: 2200  -  total flux cleaned = 0.00987979 Jy
! Component: 2250  -  total flux cleaned = 0.00991867 Jy
! Component: 2300  -  total flux cleaned = 0.00989916 Jy
! Component: 2350  -  total flux cleaned = 0.00991796 Jy
! Component: 2400  -  total flux cleaned = 0.00988079 Jy
! Component: 2450  -  total flux cleaned = 0.00978975 Jy
! Component: 2500  -  total flux cleaned = 0.0097718 Jy
! Component: 2550  -  total flux cleaned = 0.00975426 Jy
! Component: 2600  -  total flux cleaned = 0.0097365 Jy
! Component: 2650  -  total flux cleaned = 0.00965024 Jy
! Component: 2700  -  total flux cleaned = 0.00954822 Jy
! Component: 2750  -  total flux cleaned = 0.00951487 Jy
! Component: 2800  -  total flux cleaned = 0.00946535 Jy
! Component: 2850  -  total flux cleaned = 0.0094002 Jy
! Component: 2900  -  total flux cleaned = 0.00930357 Jy
! Component: 2950  -  total flux cleaned = 0.0093037 Jy
! Component: 3000  -  total flux cleaned = 0.00920965 Jy
! Component: 3050  -  total flux cleaned = 0.00914776 Jy
! Component: 3100  -  total flux cleaned = 0.00913265 Jy
! Component: 3150  -  total flux cleaned = 0.00908723 Jy
! Component: 3200  -  total flux cleaned = 0.00899787 Jy
! Component: 3250  -  total flux cleaned = 0.00896845 Jy
! Component: 3300  -  total flux cleaned = 0.00898281 Jy
! Component: 3350  -  total flux cleaned = 0.00888148 Jy
! Component: 3400  -  total flux cleaned = 0.00882434 Jy
! Component: 3450  -  total flux cleaned = 0.00873974 Jy
! Component: 3500  -  total flux cleaned = 0.00866998 Jy
! Component: 3550  -  total flux cleaned = 0.00862837 Jy
! Component: 3600  -  total flux cleaned = 0.00858737 Jy
! Component: 3650  -  total flux cleaned = 0.00853307 Jy
! Component: 3700  -  total flux cleaned = 0.00847955 Jy
! Component: 3750  -  total flux cleaned = 0.00847958 Jy
! Component: 3800  -  total flux cleaned = 0.00846637 Jy
! Component: 3850  -  total flux cleaned = 0.00838785 Jy
! Component: 3900  -  total flux cleaned = 0.00837488 Jy
! Component: 3950  -  total flux cleaned = 0.00833613 Jy
! Component: 4000  -  total flux cleaned = 0.00827237 Jy
! Component: 4050  -  total flux cleaned = 0.00827248 Jy
! Total flux subtracted in 4096 components = 0.00822215 Jy
! Clean residual min=-0.000641 max=0.000694 Jy/beam
! Clean residual mean=0.000003 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.172445 Jy
keep
! Adding 391 model components to the UV plane model.
! The established model now contains 549 components and 0.172445 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp171aa_uvs/J0804-1038_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.653 x 4.181 at 3.443 degrees (North through East)
! Clean map  min=-0.0013971  max=0.10499 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171aa_uvs/J0804-1038_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.104989 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000233831 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.668156 0.668156 1.33631 2.67262 5.34525 10.6905 21.381 42.762 85.524
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.104 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  448.996 
quit
! Quitting program
! Log file /d2/scr/pima/bp171aa_uvs/J0804-1038_C_uvs.log closed on Thu Nov 28 23:32:13 2013