! Started logfile: difmap.log_65 on Fri Dec 27 09:51:18 2013 ![@/tmp/difmap__19937.1] ! Obeying initialization file: /tmp/difmap__19937.1 ![@/home/lpetrov/config/difmap.cnf] device /XW ! Attempting to open device: '/XW' vflags="fb3" integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float taper_size taper_size = 70. integer field_size field_size = 1024 float field_cell field_cell = 0.1 float old_peak float new_peak float flux_cutoff ![Exited script file: /home/lpetrov/config/difmap.cnf] ![@/tmp/difmap__19937.2] ![Exited script file: /tmp/difmap__19937.2] obs J1511-0513_C_uva.fits ! Reading UV FITS file: J1511-0513_C_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.367521 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1511-0513 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1720 visibilities. ![Exited script file: /tmp/difmap__19937.1] sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 field_size=1024 field_cell=0.2 taper_size = 50. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.001046Jy sigma=0.774457 ! Fit after self-cal, rms=0.985838Jy sigma=0.756376 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help vplot 1 ! Overriding default options with user defined vflags="fb3" ! For help move the cursor into the plot window and press 'H'. ! Applying 25 buffered edits. nsx ! Syntax error in line: ! nsx ! ^ ! Unable to identify keyword "nsx" ! sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 field_size=1024 field_cell=0.2 taper_size = 50. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.986380Jy sigma=0.758602 ! Fit after self-cal, rms=0.984393Jy sigma=0.756819 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help vplot 1, 1:fd ! Overriding default options with user defined vflags="fb3" ! For help move the cursor into the plot window and press 'H'. ! Applying 27 buffered edits. vplot 1, 1:kp ! Overriding default options with user defined vflags="fb3" ! For help move the cursor into the plot window and press 'H'. ! Applying 29 buffered edits. sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 field_size=1024 field_cell=0.1 taper_size = 70. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.987812Jy sigma=0.763424 ! Fit after self-cal, rms=0.986721Jy sigma=0.762844 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help vplot 1, 1:pt ! Overriding default options with user defined vflags="fb3" ! For help move the cursor into the plot window and press 'H'. ! Applying 31 buffered edits. vplot 1, 1:la ! Overriding default options with user defined vflags="fb3" ! For help move the cursor into the plot window and press 'H'. ! Applying 31 buffered edits. sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 field_size=1024 field_cell=0.1 taper_size = 70. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.988697Jy sigma=0.767861 ! Fit after self-cal, rms=0.988799Jy sigma=0.770361 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help vplot 1, 1:ov ! Overriding default options with user defined vflags="fb3" ! For help move the cursor into the plot window and press 'H'. ! Applying 1 buffered edits. sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 field_size=1024 field_cell=0.1 taper_size = 70. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.988799Jy sigma=0.770361 ! Fit after self-cal, rms=0.988681Jy sigma=0.770298 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help ! Applying 13 buffered edits. sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 field_size=1024 field_cell=0.2 taper_size = 50. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.989368Jy sigma=0.770470 ! Fit after self-cal, rms=0.989108Jy sigma=0.771538 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clrmod true,true clean 200, 0.02 ! Inverting map and beam ! Estimated beam: bmin=1.512 mas, bmaj=3.608 mas, bpa=4.043 degrees ! Estimated noise=53.6973 mJy/beam. ! clean: niter=200 gain=0.02 cutoff=0 ! Component: 050 - total flux cleaned = 0.00972291 Jy ! Component: 100 - total flux cleaned = 0.0132196 Jy ! Component: 150 - total flux cleaned = 0.0142585 Jy ! Component: 200 - total flux cleaned = 0.014777 Jy ! Total flux subtracted in 200 components = 0.014777 Jy ! Clean residual min=-0.001516 max=0.001519 Jy/beam ! Clean residual mean=0.000000 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.014777 Jy mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.016900Jy sigma=0.016582 ! Fit after self-cal, rms=0.016900Jy sigma=0.016582 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=1.512 mas, bmaj=3.608 mas, bpa=4.043 degrees ! Estimated noise=53.6973 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00604012 Jy ! Component: 100 - total flux cleaned = 0.00969443 Jy ! Component: 150 - total flux cleaned = 0.0119053 Jy ! Component: 200 - total flux cleaned = 0.0132429 Jy ! Component: 250 - total flux cleaned = 0.0140555 Jy ! Component: 300 - total flux cleaned = 0.0145991 Jy ! Component: 350 - total flux cleaned = 0.0150214 Jy ! Component: 400 - total flux cleaned = 0.01537 Jy ! Component: 450 - total flux cleaned = 0.0156699 Jy ! Component: 500 - total flux cleaned = 0.0159292 Jy ! Component: 550 - total flux cleaned = 0.0161543 Jy ! Component: 600 - total flux cleaned = 0.0163503 Jy ! Component: 650 - total flux cleaned = 0.0165211 Jy ! Component: 700 - total flux cleaned = 0.01667 Jy ! Component: 750 - total flux cleaned = 0.0168 Jy ! Component: 800 - total flux cleaned = 0.0169136 Jy ! Total flux subtracted in 800 components = 0.0169136 Jy ! Clean residual min=-0.002175 max=0.002307 Jy/beam ! Clean residual mean=0.000002 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.0169136 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0169136 Jy ! Inverting map and beam ! Estimated beam: bmin=1.877 mas, bmaj=4.203 mas, bpa=4.143 degrees ! Estimated noise=24.5664 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000769547 Jy ! Component: 100 - total flux cleaned = 0.00117527 Jy ! Component: 150 - total flux cleaned = 0.00117442 Jy ! Component: 200 - total flux cleaned = 0.00117374 Jy ! Component: 250 - total flux cleaned = 0.00117319 Jy ! Component: 300 - total flux cleaned = 0.00113959 Jy ! Component: 350 - total flux cleaned = 0.0011085 Jy ! Component: 400 - total flux cleaned = 0.00107958 Jy ! Component: 450 - total flux cleaned = 0.00104628 Jy ! Component: 500 - total flux cleaned = 0.00102175 Jy ! Component: 550 - total flux cleaned = 0.000998655 Jy ! Component: 600 - total flux cleaned = 0.000971499 Jy ! Component: 650 - total flux cleaned = 0.000951051 Jy ! Component: 700 - total flux cleaned = 0.000926988 Jy ! Component: 750 - total flux cleaned = 0.000904408 Jy ! Component: 800 - total flux cleaned = 0.000883206 Jy ! Component: 850 - total flux cleaned = 0.000867167 Jy ! Component: 900 - total flux cleaned = 0.00084444 Jy ! Component: 950 - total flux cleaned = 0.000826622 Jy ! Component: 1000 - total flux cleaned = 0.000809705 Jy ! Component: 1050 - total flux cleaned = 0.000793644 Jy ! Component: 1100 - total flux cleaned = 0.000775403 Jy ! Component: 1150 - total flux cleaned = 0.000758146 Jy ! Component: 1200 - total flux cleaned = 0.000744478 Jy ! Total flux subtracted in 1200 components = 0.000744478 Jy ! Clean residual min=-0.001257 max=0.001491 Jy/beam ! Clean residual mean=-0.000002 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0176581 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.016900Jy sigma=0.016582 ! Fit after self-cal, rms=0.016900Jy sigma=0.016582 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=1.512 mas, bmaj=3.608 mas, bpa=4.043 degrees ! Estimated noise=53.6973 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00604012 Jy ! Component: 100 - total flux cleaned = 0.00969443 Jy ! Component: 150 - total flux cleaned = 0.0119053 Jy ! Component: 200 - total flux cleaned = 0.0132429 Jy ! Component: 250 - total flux cleaned = 0.0140555 Jy ! Component: 300 - total flux cleaned = 0.0145651 Jy ! Component: 350 - total flux cleaned = 0.014936 Jy ! Component: 400 - total flux cleaned = 0.015242 Jy ! Component: 450 - total flux cleaned = 0.0155012 Jy ! Component: 500 - total flux cleaned = 0.015722 Jy ! Component: 550 - total flux cleaned = 0.0159102 Jy ! Component: 600 - total flux cleaned = 0.016071 Jy ! Component: 650 - total flux cleaned = 0.0162089 Jy ! Component: 700 - total flux cleaned = 0.0163273 Jy ! Component: 750 - total flux cleaned = 0.0164291 Jy ! Component: 800 - total flux cleaned = 0.0165166 Jy ! Total flux subtracted in 800 components = 0.0165166 Jy ! Clean residual min=-0.002230 max=0.002288 Jy/beam ! Clean residual mean=0.000001 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.0165166 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.0165166 Jy ! Inverting map and beam ! Estimated beam: bmin=1.877 mas, bmaj=4.203 mas, bpa=4.143 degrees ! Estimated noise=24.5664 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000743877 Jy ! Component: 100 - total flux cleaned = 0.00119423 Jy ! Component: 150 - total flux cleaned = 0.00146837 Jy ! Component: 200 - total flux cleaned = 0.00152345 Jy ! Component: 250 - total flux cleaned = 0.001511 Jy ! Component: 300 - total flux cleaned = 0.00148163 Jy ! Component: 350 - total flux cleaned = 0.00145393 Jy ! Component: 400 - total flux cleaned = 0.00142787 Jy ! Component: 450 - total flux cleaned = 0.00140329 Jy ! Component: 500 - total flux cleaned = 0.00137561 Jy ! Component: 550 - total flux cleaned = 0.00135385 Jy ! Component: 600 - total flux cleaned = 0.00132919 Jy ! Component: 650 - total flux cleaned = 0.00130981 Jy ! Component: 700 - total flux cleaned = 0.00129139 Jy ! Component: 750 - total flux cleaned = 0.00127054 Jy ! Component: 800 - total flux cleaned = 0.00125412 Jy ! Component: 850 - total flux cleaned = 0.00123553 Jy ! Component: 900 - total flux cleaned = 0.00122377 Jy ! Component: 950 - total flux cleaned = 0.00121819 Jy ! Component: 1000 - total flux cleaned = 0.00121019 Jy ! Component: 1050 - total flux cleaned = 0.00120509 Jy ! Component: 1100 - total flux cleaned = 0.00120014 Jy ! Component: 1150 - total flux cleaned = 0.00119307 Jy ! Component: 1200 - total flux cleaned = 0.00118857 Jy ! Total flux subtracted in 1200 components = 0.00118857 Jy ! Clean residual min=-0.001276 max=0.001512 Jy/beam ! Clean residual mean=-0.000002 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.0177051 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.877 x 4.203 at 4.143 degrees (North through East) ! Clean map min=-0.0012615 max=0.015375 Jy/beam ! Clean map min=-0.0012615 max=0.017174 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. selflim 1.2 ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. uncalib selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 34 components and 0.0177051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014306Jy sigma=0.009398 ! Fit after self-cal, rms=0.013945Jy sigma=0.009121 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.013945Jy sigma=0.009121 ! Fit after self-cal, rms=0.013902Jy sigma=0.009022 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.016532Jy sigma=0.016322 ! Fit after self-cal, rms=0.016532Jy sigma=0.016322 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=1.51 mas, bmaj=3.615 mas, bpa=3.935 degrees ! Estimated noise=54.2941 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00609989 Jy ! Component: 100 - total flux cleaned = 0.00979036 Jy ! Component: 150 - total flux cleaned = 0.0120231 Jy ! Component: 200 - total flux cleaned = 0.0133739 Jy ! Component: 250 - total flux cleaned = 0.0141913 Jy ! Component: 300 - total flux cleaned = 0.014706 Jy ! Component: 350 - total flux cleaned = 0.015105 Jy ! Component: 400 - total flux cleaned = 0.015436 Jy ! Component: 450 - total flux cleaned = 0.0157147 Jy ! Component: 500 - total flux cleaned = 0.0159505 Jy ! Component: 550 - total flux cleaned = 0.0161516 Jy ! Component: 600 - total flux cleaned = 0.0163237 Jy ! Component: 650 - total flux cleaned = 0.0164712 Jy ! Component: 700 - total flux cleaned = 0.0165976 Jy ! Component: 750 - total flux cleaned = 0.0167059 Jy ! Component: 800 - total flux cleaned = 0.0167991 Jy ! Total flux subtracted in 800 components = 0.0167991 Jy ! Clean residual min=-0.002254 max=0.002322 Jy/beam ! Clean residual mean=0.000001 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.0167991 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0167991 Jy ! Inverting map and beam ! Estimated beam: bmin=1.855 mas, bmaj=4.326 mas, bpa=2.794 degrees ! Estimated noise=25.1943 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000642963 Jy ! Component: 100 - total flux cleaned = 0.00103196 Jy ! Component: 150 - total flux cleaned = 0.0012673 Jy ! Component: 200 - total flux cleaned = 0.0012885 Jy ! Component: 250 - total flux cleaned = 0.00126588 Jy ! Component: 300 - total flux cleaned = 0.00123891 Jy ! Component: 350 - total flux cleaned = 0.00121336 Jy ! Component: 400 - total flux cleaned = 0.00118442 Jy ! Component: 450 - total flux cleaned = 0.00116163 Jy ! Component: 500 - total flux cleaned = 0.00113582 Jy ! Component: 550 - total flux cleaned = 0.00111556 Jy ! Component: 600 - total flux cleaned = 0.00109629 Jy ! Component: 650 - total flux cleaned = 0.00107453 Jy ! Component: 700 - total flux cleaned = 0.00105738 Jy ! Component: 750 - total flux cleaned = 0.00103795 Jy ! Component: 800 - total flux cleaned = 0.0010227 Jy ! Component: 850 - total flux cleaned = 0.00100821 Jy ! Component: 900 - total flux cleaned = 0.000991804 Jy ! Component: 950 - total flux cleaned = 0.00097889 Jy ! Component: 1000 - total flux cleaned = 0.000964276 Jy ! Component: 1050 - total flux cleaned = 0.000952785 Jy ! Component: 1100 - total flux cleaned = 0.00094188 Jy ! Component: 1150 - total flux cleaned = 0.000929528 Jy ! Component: 1200 - total flux cleaned = 0.00091981 Jy ! Total flux subtracted in 1200 components = 0.00091981 Jy ! Clean residual min=-0.001326 max=0.001320 Jy/beam ! Clean residual mean=-0.000002 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0177189 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.016532Jy sigma=0.016322 ! Fit after self-cal, rms=0.016532Jy sigma=0.016322 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=1.51 mas, bmaj=3.615 mas, bpa=3.935 degrees ! Estimated noise=54.2941 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00609989 Jy ! Component: 100 - total flux cleaned = 0.00979036 Jy ! Component: 150 - total flux cleaned = 0.0120231 Jy ! Component: 200 - total flux cleaned = 0.0133739 Jy ! Component: 250 - total flux cleaned = 0.0141913 Jy ! Component: 300 - total flux cleaned = 0.0145762 Jy ! Component: 350 - total flux cleaned = 0.0147615 Jy ! Component: 400 - total flux cleaned = 0.0149601 Jy ! Component: 450 - total flux cleaned = 0.015059 Jy ! Component: 500 - total flux cleaned = 0.0151386 Jy ! Component: 550 - total flux cleaned = 0.0152256 Jy ! Component: 600 - total flux cleaned = 0.0152957 Jy ! Component: 650 - total flux cleaned = 0.0153727 Jy ! Component: 700 - total flux cleaned = 0.0154448 Jy ! Component: 750 - total flux cleaned = 0.015503 Jy ! Component: 800 - total flux cleaned = 0.0155582 Jy ! Total flux subtracted in 800 components = 0.0155582 Jy ! Clean residual min=-0.002174 max=0.002164 Jy/beam ! Clean residual mean=0.000000 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.0155582 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0155582 Jy ! Inverting map and beam ! Estimated beam: bmin=1.855 mas, bmaj=4.326 mas, bpa=2.794 degrees ! Estimated noise=25.1943 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000819258 Jy ! Component: 100 - total flux cleaned = 0.00139581 Jy ! Component: 150 - total flux cleaned = 0.00182005 Jy ! Component: 200 - total flux cleaned = 0.00214447 Jy ! Component: 250 - total flux cleaned = 0.00239625 Jy ! Component: 300 - total flux cleaned = 0.00259166 Jy ! Component: 350 - total flux cleaned = 0.00263733 Jy ! Component: 400 - total flux cleaned = 0.00267198 Jy ! Component: 450 - total flux cleaned = 0.00270292 Jy ! Component: 500 - total flux cleaned = 0.00270768 Jy ! Component: 550 - total flux cleaned = 0.00271216 Jy ! Component: 600 - total flux cleaned = 0.00272043 Jy ! Component: 650 - total flux cleaned = 0.00272418 Jy ! Component: 700 - total flux cleaned = 0.00272774 Jy ! Component: 750 - total flux cleaned = 0.00273115 Jy ! Component: 800 - total flux cleaned = 0.00273435 Jy ! Component: 850 - total flux cleaned = 0.00273425 Jy ! Component: 900 - total flux cleaned = 0.00273418 Jy ! Component: 950 - total flux cleaned = 0.00273145 Jy ! Component: 1000 - total flux cleaned = 0.00273403 Jy ! Component: 1050 - total flux cleaned = 0.00273158 Jy ! Component: 1100 - total flux cleaned = 0.00272917 Jy ! Component: 1150 - total flux cleaned = 0.00272685 Jy ! Component: 1200 - total flux cleaned = 0.00272237 Jy ! Total flux subtracted in 1200 components = 0.00272237 Jy ! Clean residual min=-0.001190 max=0.001395 Jy/beam ! Clean residual mean=-0.000002 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0182806 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.855 x 4.326 at 2.794 degrees (North through East) ! Clean map min=-0.0011746 max=0.015236 Jy/beam ! Clean map min=-0.0011746 max=0.016987 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.016532Jy sigma=0.016322 ! Fit after self-cal, rms=0.016532Jy sigma=0.016322 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=1.51 mas, bmaj=3.615 mas, bpa=3.935 degrees ! Estimated noise=54.2941 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00609989 Jy ! Component: 100 - total flux cleaned = 0.00979036 Jy ! Component: 150 - total flux cleaned = 0.0120231 Jy ! Component: 200 - total flux cleaned = 0.0133739 Jy ! Component: 250 - total flux cleaned = 0.0141913 Jy ! Component: 300 - total flux cleaned = 0.014706 Jy ! Component: 350 - total flux cleaned = 0.015105 Jy ! Component: 400 - total flux cleaned = 0.015436 Jy ! Component: 450 - total flux cleaned = 0.0157147 Jy ! Component: 500 - total flux cleaned = 0.0159505 Jy ! Component: 550 - total flux cleaned = 0.0161516 Jy ! Component: 600 - total flux cleaned = 0.0163237 Jy ! Component: 650 - total flux cleaned = 0.0164712 Jy ! Component: 700 - total flux cleaned = 0.0165976 Jy ! Component: 750 - total flux cleaned = 0.0167059 Jy ! Component: 800 - total flux cleaned = 0.0167991 Jy ! Total flux subtracted in 800 components = 0.0167991 Jy ! Clean residual min=-0.002254 max=0.002322 Jy/beam ! Clean residual mean=0.000001 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.0167991 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0167991 Jy ! Inverting map and beam ! Estimated beam: bmin=1.855 mas, bmaj=4.326 mas, bpa=2.794 degrees ! Estimated noise=25.1943 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000642963 Jy ! Component: 100 - total flux cleaned = 0.00103196 Jy ! Component: 150 - total flux cleaned = 0.0012673 Jy ! Component: 200 - total flux cleaned = 0.0012885 Jy ! Component: 250 - total flux cleaned = 0.00126588 Jy ! Component: 300 - total flux cleaned = 0.00123891 Jy ! Component: 350 - total flux cleaned = 0.00121336 Jy ! Component: 400 - total flux cleaned = 0.00118442 Jy ! Component: 450 - total flux cleaned = 0.00116163 Jy ! Component: 500 - total flux cleaned = 0.00113582 Jy ! Component: 550 - total flux cleaned = 0.00111556 Jy ! Component: 600 - total flux cleaned = 0.00109629 Jy ! Component: 650 - total flux cleaned = 0.00107453 Jy ! Component: 700 - total flux cleaned = 0.00105738 Jy ! Component: 750 - total flux cleaned = 0.00103795 Jy ! Component: 800 - total flux cleaned = 0.0010227 Jy ! Component: 850 - total flux cleaned = 0.00100821 Jy ! Component: 900 - total flux cleaned = 0.000991804 Jy ! Component: 950 - total flux cleaned = 0.00097889 Jy ! Component: 1000 - total flux cleaned = 0.000964276 Jy ! Component: 1050 - total flux cleaned = 0.000952785 Jy ! Component: 1100 - total flux cleaned = 0.00094188 Jy ! Component: 1150 - total flux cleaned = 0.000929528 Jy ! Component: 1200 - total flux cleaned = 0.00091981 Jy ! Total flux subtracted in 1200 components = 0.00091981 Jy ! Clean residual min=-0.001326 max=0.001320 Jy/beam ! Clean residual mean=-0.000002 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0177189 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help selflim 1.2 ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. uncalib selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 31 components and 0.0177189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.013884Jy sigma=0.009023 ! Fit after self-cal, rms=0.013851Jy sigma=0.009012 selfcal true,true,1.e6 ! Performing amp+phase self-cal over 1e+06 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.013851Jy sigma=0.009012 ! Fit after self-cal, rms=0.013851Jy sigma=0.009012 clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.016532Jy sigma=0.016322 ! Fit after self-cal, rms=0.016532Jy sigma=0.016322 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=1.51 mas, bmaj=3.615 mas, bpa=3.935 degrees ! Estimated noise=54.2941 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00610754 Jy ! Component: 100 - total flux cleaned = 0.00980264 Jy ! Component: 150 - total flux cleaned = 0.0120382 Jy ! Component: 200 - total flux cleaned = 0.0133907 Jy ! Component: 250 - total flux cleaned = 0.0142097 Jy ! Component: 300 - total flux cleaned = 0.0147283 Jy ! Component: 350 - total flux cleaned = 0.015131 Jy ! Component: 400 - total flux cleaned = 0.015463 Jy ! Component: 450 - total flux cleaned = 0.0157408 Jy ! Component: 500 - total flux cleaned = 0.0159754 Jy ! Component: 550 - total flux cleaned = 0.0161748 Jy ! Component: 600 - total flux cleaned = 0.0163451 Jy ! Component: 650 - total flux cleaned = 0.0164909 Jy ! Component: 700 - total flux cleaned = 0.0166161 Jy ! Component: 750 - total flux cleaned = 0.0167237 Jy ! Component: 800 - total flux cleaned = 0.0168166 Jy ! Total flux subtracted in 800 components = 0.0168166 Jy ! Clean residual min=-0.002233 max=0.002326 Jy/beam ! Clean residual mean=0.000001 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0168166 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0168166 Jy ! Inverting map and beam ! Estimated beam: bmin=1.855 mas, bmaj=4.326 mas, bpa=2.794 degrees ! Estimated noise=25.1943 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000640257 Jy ! Component: 100 - total flux cleaned = 0.00102762 Jy ! Component: 150 - total flux cleaned = 0.00126197 Jy ! Component: 200 - total flux cleaned = 0.00128378 Jy ! Component: 250 - total flux cleaned = 0.00125518 Jy ! Component: 300 - total flux cleaned = 0.00122809 Jy ! Component: 350 - total flux cleaned = 0.00120239 Jy ! Component: 400 - total flux cleaned = 0.00117329 Jy ! Component: 450 - total flux cleaned = 0.00115039 Jy ! Component: 500 - total flux cleaned = 0.00112447 Jy ! Component: 550 - total flux cleaned = 0.00110408 Jy ! Component: 600 - total flux cleaned = 0.001081 Jy ! Component: 650 - total flux cleaned = 0.00106283 Jy ! Component: 700 - total flux cleaned = 0.0010456 Jy ! Component: 750 - total flux cleaned = 0.00102608 Jy ! Component: 800 - total flux cleaned = 0.00101075 Jy ! Component: 850 - total flux cleaned = 0.000993366 Jy ! Component: 900 - total flux cleaned = 0.000979702 Jy ! Component: 950 - total flux cleaned = 0.000966724 Jy ! Component: 1000 - total flux cleaned = 0.000952043 Jy ! Component: 1050 - total flux cleaned = 0.000940477 Jy ! Component: 1100 - total flux cleaned = 0.00092951 Jy ! Component: 1150 - total flux cleaned = 0.000917107 Jy ! Component: 1200 - total flux cleaned = 0.000907338 Jy ! Total flux subtracted in 1200 components = 0.000907338 Jy ! Clean residual min=-0.001318 max=0.001327 Jy/beam ! Clean residual mean=-0.000002 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0177239 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help proj ! Adding 4 model components to the UV plane model. ! The established model now contains 30 components and 0.0177239 Jy ! Using default options string "m3" ! Move the cursor into the plot window and press 'H' for help ! Applying 1 buffered edits. x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map and beam ! Estimated beam: bmin=1.854 mas, bmaj=4.332 mas, bpa=2.772 degrees ! Estimated noise=25.206 mJy/beam. ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021466 Jy ! Component: 100 - total flux cleaned = 0.000317357 Jy ! Component: 150 - total flux cleaned = 0.000469194 Jy ! Component: 200 - total flux cleaned = 0.000487369 Jy ! Component: 250 - total flux cleaned = 0.000453954 Jy ! Component: 300 - total flux cleaned = 0.000438284 Jy ! Component: 350 - total flux cleaned = 0.000408253 Jy ! Component: 400 - total flux cleaned = 0.000394044 Jy ! Component: 450 - total flux cleaned = 0.000338576 Jy ! Component: 500 - total flux cleaned = 0.000285252 Jy ! Component: 550 - total flux cleaned = 0.000208271 Jy ! Component: 600 - total flux cleaned = 0.000108703 Jy ! Component: 650 - total flux cleaned = -1.15783e-05 Jy ! Component: 700 - total flux cleaned = -0.000127741 Jy ! Component: 750 - total flux cleaned = -0.000206821 Jy ! Component: 800 - total flux cleaned = -0.000294607 Jy ! Component: 850 - total flux cleaned = -0.000390689 Jy ! Component: 900 - total flux cleaned = -0.000484296 Jy ! Component: 950 - total flux cleaned = -0.000535032 Jy ! Component: 1000 - total flux cleaned = -0.000614589 Jy ! Component: 1050 - total flux cleaned = -0.000692027 Jy ! Component: 1100 - total flux cleaned = -0.000748975 Jy ! Component: 1150 - total flux cleaned = -0.000832703 Jy ! Component: 1200 - total flux cleaned = -0.000905844 Jy ! Component: 1250 - total flux cleaned = -0.0010133 Jy ! Component: 1300 - total flux cleaned = -0.00111861 Jy ! Component: 1350 - total flux cleaned = -0.00119592 Jy ! Component: 1400 - total flux cleaned = -0.00126359 Jy ! Component: 1450 - total flux cleaned = -0.00132997 Jy ! Component: 1500 - total flux cleaned = -0.00137068 Jy ! Component: 1550 - total flux cleaned = -0.00145085 Jy ! Component: 1600 - total flux cleaned = -0.00152157 Jy ! Component: 1650 - total flux cleaned = -0.00155257 Jy ! Component: 1700 - total flux cleaned = -0.00161367 Jy ! Component: 1750 - total flux cleaned = -0.00165867 Jy ! Component: 1800 - total flux cleaned = -0.00171051 Jy ! Component: 1850 - total flux cleaned = -0.00176163 Jy ! Component: 1900 - total flux cleaned = -0.00181933 Jy ! Component: 1950 - total flux cleaned = -0.00188333 Jy ! Component: 2000 - total flux cleaned = -0.00194651 Jy ! Component: 2050 - total flux cleaned = -0.0020297 Jy ! Component: 2100 - total flux cleaned = -0.0020982 Jy ! Component: 2150 - total flux cleaned = -0.00219304 Jy ! Component: 2200 - total flux cleaned = -0.00228689 Jy ! Component: 2250 - total flux cleaned = -0.00236663 Jy ! Component: 2300 - total flux cleaned = -0.00245224 Jy ! Component: 2350 - total flux cleaned = -0.00254363 Jy ! Component: 2400 - total flux cleaned = -0.00262772 Jy ! Component: 2450 - total flux cleaned = -0.0027047 Jy ! Component: 2500 - total flux cleaned = -0.0027874 Jy ! Component: 2550 - total flux cleaned = -0.00286939 Jy ! Component: 2600 - total flux cleaned = -0.00295692 Jy ! Component: 2650 - total flux cleaned = -0.00301896 Jy ! Component: 2700 - total flux cleaned = -0.00309282 Jy ! Component: 2750 - total flux cleaned = -0.00317823 Jy ! Component: 2800 - total flux cleaned = -0.0032448 Jy ! Component: 2850 - total flux cleaned = -0.00331694 Jy ! Component: 2900 - total flux cleaned = -0.00338253 Jy ! Component: 2950 - total flux cleaned = -0.00343587 Jy ! Component: 3000 - total flux cleaned = -0.00349477 Jy ! Component: 3050 - total flux cleaned = -0.0035533 Jy ! Component: 3100 - total flux cleaned = -0.00361155 Jy ! Component: 3150 - total flux cleaned = -0.00365218 Jy ! Component: 3200 - total flux cleaned = -0.00369844 Jy ! Component: 3250 - total flux cleaned = -0.0037215 Jy ! Component: 3300 - total flux cleaned = -0.00376183 Jy ! Component: 3350 - total flux cleaned = -0.00378481 Jy ! Component: 3400 - total flux cleaned = -0.00383073 Jy ! Component: 3450 - total flux cleaned = -0.00388805 Jy ! Component: 3500 - total flux cleaned = -0.00391095 Jy ! Component: 3550 - total flux cleaned = -0.00392813 Jy ! Component: 3600 - total flux cleaned = -0.00395105 Jy ! Component: 3650 - total flux cleaned = -0.00396824 Jy ! Component: 3700 - total flux cleaned = -0.00400269 Jy ! Component: 3750 - total flux cleaned = -0.00401992 Jy ! Component: 3800 - total flux cleaned = -0.00403715 Jy ! Component: 3850 - total flux cleaned = -0.00406593 Jy ! Component: 3900 - total flux cleaned = -0.00407744 Jy ! Component: 3950 - total flux cleaned = -0.00410628 Jy ! Component: 4000 - total flux cleaned = -0.00411783 Jy ! Component: 4050 - total flux cleaned = -0.00412941 Jy ! Total flux subtracted in 4096 components = -0.00413518 Jy ! Clean residual min=-0.000297 max=0.000341 Jy/beam ! Clean residual mean=-0.000000 rms=0.000099 Jy/beam ! Combined flux in latest and established models = 0.0135888 Jy levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.854 x 4.332 at 2.772 degrees (North through East) ! Clean map min=-0.00029743 max=0.017348 Jy/beam ! Clean map min=-0.0017095 max=0.017451 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. cmapo ! Syntax error in line: ! cmapo ! ^ ! Unable to identify keyword "cmapo" ! x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (512),0.01 ! Adding 251 model components to the UV plane model. ! The established model now contains 280 components and 0.0135887 Jy ! Inverting map ! clean: niter=512 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153802 Jy ! Component: 100 - total flux cleaned = -0.000141245 Jy ! Component: 150 - total flux cleaned = -0.000152126 Jy ! Component: 200 - total flux cleaned = -0.000172825 Jy ! Component: 250 - total flux cleaned = -0.000232201 Jy ! Component: 300 - total flux cleaned = -0.000289234 Jy ! Component: 350 - total flux cleaned = -0.000339676 Jy ! Component: 400 - total flux cleaned = -0.000392977 Jy ! Component: 450 - total flux cleaned = -0.000466397 Jy ! Component: 500 - total flux cleaned = -0.000525351 Jy ! Total flux subtracted in 512 components = -0.000533677 Jy ! Clean residual min=-0.000226 max=0.000228 Jy/beam ! Clean residual mean=-0.000001 rms=0.000072 Jy/beam ! Combined flux in latest and established models = 0.0130551 Jy levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.854 x 4.332 at 2.772 degrees (North through East) ! Clean map min=-0.0013761 max=0.01737 Jy/beam ! Clean map min=-0.0013761 max=0.017394 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. save J1511-0513_C ! Writing UV FITS file: J1511-0513_C.uvf ! Writing 347 model components to file: J1511-0513_C.mod ! wwins: Wrote 5 windows to J1511-0513_C.win ! Adding 67 model components to the UV plane model. ! The established model now contains 345 components and 0.0130551 Jy ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.854 x 4.332 at 2.772 degrees (North through East) ! Clean map min=-0.001384 max=0.017397 Jy/beam ! Writing clean map to FITS file: J1511-0513_C.fits ! Writing difmap environment to: J1511-0513_C.par quit ! Quitting program ! Log file difmap.log_65 closed on Fri Dec 27 09:57:07 2013