! Started logfile: /scr/pima/bp171a9_uvs/J1157+1902_C_uvs.log on Sat Dec 21 09:13:04 2013
obs /scr/pima/bp171a9_uvs/J1157+1902_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a9_uvs/J1157+1902_C_uva.fits
! AN table 1: 9 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.466667 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1157+1902
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1512 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a9_uvs/J1157+1902_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000643Jy  sigma=2.095430
! Fit after  self-cal, rms=0.953735Jy  sigma=1.983824
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.33 mas, bmaj=3.651 mas, bpa=-2.234 degrees
! Estimated noise=12.5272 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0373615 Jy
! Component: 100  -  total flux cleaned = 0.0463454 Jy
! Total flux subtracted in 100 components = 0.0463454 Jy
! Clean residual min=-0.002408 max=0.003591 Jy/beam
! Clean residual mean=0.000001 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.0463455 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0463455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019730Jy  sigma=0.037806
! Fit after  self-cal, rms=0.017981Jy  sigma=0.035202
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00419947 Jy
! Component: 100  -  total flux cleaned = 0.00635497 Jy
! Total flux subtracted in 100 components = 0.00635497 Jy
! Clean residual min=-0.001859 max=0.002626 Jy/beam
! Clean residual mean=0.000001 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.0527004 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.0527004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017323Jy  sigma=0.031673
! Fit after  self-cal, rms=0.017310Jy  sigma=0.031657
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.516 mas, bmaj=3.767 mas, bpa=-2.303 degrees
! Estimated noise=9.32811 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255057 Jy
! Component: 100  -  total flux cleaned = 0.00315121 Jy
! Component: 150  -  total flux cleaned = 0.00352236 Jy
! Component: 200  -  total flux cleaned = 0.00385106 Jy
! Total flux subtracted in 200 components = 0.00385106 Jy
! Clean residual min=-0.001482 max=0.002159 Jy/beam
! Clean residual mean=0.000000 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.0565515 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 32 components and 0.0565515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016968Jy  sigma=0.030496
! Fit after  self-cal, rms=0.016905Jy  sigma=0.030385
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.516 x 3.767 at -2.303 degrees (North through East)
! Clean map  min=-0.0014513  max=0.048786 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.85     KP        0.88     
!   LA        1.03     MK        1.06     NL        1.04     OV        0.95     
!   PT        0.90     SC        0.90     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.98     KP        0.90     
!   LA        1.07     MK        1.00     NL        1.08     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.93     KP        1.04     
!   LA        1.02     MK        1.06     NL        1.04     OV        0.93     
!   PT        1.06     SC        0.94     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        0.96     KP        1.03     
!   LA        1.05     MK        1.02     NL        0.98     OV        1.01     
!   PT        0.92     SC        1.03     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        0.93     KP        0.96     
!   LA        1.15     MK        1.01     NL        1.04     OV        0.92     
!   PT        1.06     SC        1.09     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.92     HN        0.92     KP        0.93     
!   LA        1.00     MK        1.00     NL        1.02     OV        1.03     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.04     KP        0.99     
!   LA        1.08     MK        0.93     NL        1.03     OV        0.99     
!   PT        0.94     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.016905Jy  sigma=0.030385
! Fit after  self-cal, rms=0.016324Jy  sigma=0.029339
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.538 mas, bmaj=3.81 mas, bpa=-2.473 degrees
! Estimated noise=9.21021 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000363792 Jy
! Component: 100  -  total flux cleaned = 0.000213471 Jy
! Component: 150  -  total flux cleaned = 0.000172701 Jy
! Component: 200  -  total flux cleaned = 0.000189408 Jy
! Total flux subtracted in 200 components = 0.000189408 Jy
! Clean residual min=-0.001300 max=0.001489 Jy/beam
! Clean residual mean=0.000001 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0567409 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 51 components and 0.0567409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016220Jy  sigma=0.029229
! Fit after  self-cal, rms=0.016220Jy  sigma=0.029206
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016220Jy  sigma=0.029206
! Fit after  self-cal, rms=0.016197Jy  sigma=0.029197
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.536 mas, bmaj=3.805 mas, bpa=-2.473 degrees
! Estimated noise=9.17397 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.66282e-05 Jy
! Component: 100  -  total flux cleaned = 9.74653e-05 Jy
! Component: 150  -  total flux cleaned = 0.00011402 Jy
! Component: 200  -  total flux cleaned = 0.000143806 Jy
! Total flux subtracted in 200 components = 0.000143806 Jy
! Clean residual min=-0.001299 max=0.001433 Jy/beam
! Clean residual mean=0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.0568847 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 56 components and 0.0568847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016132Jy  sigma=0.029166
! Fit after  self-cal, rms=0.016132Jy  sigma=0.029159
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11.1, 36.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00079143 Jy
! Component: 100  -  total flux cleaned = 0.000848232 Jy
! Component: 150  -  total flux cleaned = 0.000895678 Jy
! Component: 200  -  total flux cleaned = 0.000958598 Jy
! Total flux subtracted in 200 components = 0.000958598 Jy
! Clean residual min=-0.001251 max=0.001255 Jy/beam
! Clean residual mean=0.000001 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.0578433 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 78 components and 0.0578433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016032Jy  sigma=0.028860
! Fit after  self-cal, rms=0.016013Jy  sigma=0.028844
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016013Jy  sigma=0.028844
! Fit after  self-cal, rms=0.016002Jy  sigma=0.028820
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.534 mas, bmaj=3.798 mas, bpa=-2.516 degrees
! Estimated noise=9.14376 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.17407e-05 Jy
! Component: 100  -  total flux cleaned = 0.000129556 Jy
! Component: 150  -  total flux cleaned = 0.000198588 Jy
! Component: 200  -  total flux cleaned = 0.000262582 Jy
! Total flux subtracted in 200 components = 0.000262582 Jy
! Clean residual min=-0.001266 max=0.001206 Jy/beam
! Clean residual mean=0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0581059 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 86 components and 0.0581059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015938Jy  sigma=0.028760
! Fit after  self-cal, rms=0.015936Jy  sigma=0.028757
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.03427e-05 Jy
! Component: 100  -  total flux cleaned = 0.000123046 Jy
! Component: 150  -  total flux cleaned = 0.00015058 Jy
! Component: 200  -  total flux cleaned = 0.000202894 Jy
! Total flux subtracted in 200 components = 0.000202894 Jy
! Clean residual min=-0.001222 max=0.001160 Jy/beam
! Clean residual mean=0.000001 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.0583088 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 93 components and 0.0583088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015909Jy  sigma=0.028716
! Fit after  self-cal, rms=0.015907Jy  sigma=0.028714
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015907Jy  sigma=0.028714
! Fit after  self-cal, rms=0.015891Jy  sigma=0.028700
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.599 mas, bmaj=5.232 mas, bpa=2.134 degrees
! Estimated noise=11.2786 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000492589 Jy
! Component: 100  -  total flux cleaned = 0.000645365 Jy
! Component: 150  -  total flux cleaned = 0.00066993 Jy
! Component: 200  -  total flux cleaned = 0.000691649 Jy
! Total flux subtracted in 200 components = 0.000691649 Jy
! Clean residual min=-0.001183 max=0.001162 Jy/beam
! Clean residual mean=0.000002 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.0590004 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 103 components and 0.0590004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015884Jy  sigma=0.028685
! Fit after  self-cal, rms=0.015880Jy  sigma=0.028682
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.42958e-05 Jy
! Component: 100  -  total flux cleaned = 8.42804e-05 Jy
! Component: 150  -  total flux cleaned = 0.000111992 Jy
! Component: 200  -  total flux cleaned = 0.00012957 Jy
! Total flux subtracted in 200 components = 0.00012957 Jy
! Clean residual min=-0.001161 max=0.001122 Jy/beam
! Clean residual mean=0.000002 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.05913 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 113 components and 0.05913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015872Jy  sigma=0.028687
! Fit after  self-cal, rms=0.015870Jy  sigma=0.028686
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.531 mas, bmaj=3.792 mas, bpa=-2.519 degrees
! Estimated noise=9.09964 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.531 x 3.792 at -2.519 degrees (North through East)
! Clean map  min=-0.0011432  max=0.046948 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.327 mas, bmaj=3.63 mas, bpa=-2.271 degrees
! Estimated noise=12.1348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0364549 Jy
! Component: 100  -  total flux cleaned = 0.0452626 Jy
! Component: 150  -  total flux cleaned = 0.0494388 Jy
! Component: 200  -  total flux cleaned = 0.0520467 Jy
! Total flux subtracted in 200 components = 0.0520467 Jy
! Clean residual min=-0.001953 max=0.001882 Jy/beam
! Clean residual mean=0.000001 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.0520468 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0520468 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.531 mas, bmaj=3.792 mas, bpa=-2.519 degrees
! Estimated noise=9.09964 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243369 Jy
! Component: 100  -  total flux cleaned = 0.00393531 Jy
! Component: 150  -  total flux cleaned = 0.0045584 Jy
! Component: 200  -  total flux cleaned = 0.00481177 Jy
! Total flux subtracted in 200 components = 0.00481177 Jy
! Clean residual min=-0.001424 max=0.001411 Jy/beam
! Clean residual mean=0.000001 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.0568585 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 36 components and 0.0568585 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.599 mas, bmaj=5.232 mas, bpa=2.134 degrees
! Estimated noise=11.2786 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120339 Jy
! Component: 100  -  total flux cleaned = 0.00175955 Jy
! Component: 150  -  total flux cleaned = 0.00194821 Jy
! Component: 200  -  total flux cleaned = 0.00205664 Jy
! Total flux subtracted in 200 components = 0.00205664 Jy
! Clean residual min=-0.001261 max=0.001088 Jy/beam
! Clean residual mean=0.000002 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.0589152 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.5013e-05 Jy
! Component: 100  -  total flux cleaned = 0.000164458 Jy
! Component: 150  -  total flux cleaned = 0.000202415 Jy
! Component: 200  -  total flux cleaned = 0.000249826 Jy
! Total flux subtracted in 200 components = 0.000249826 Jy
! Clean residual min=-0.001199 max=0.001083 Jy/beam
! Clean residual mean=0.000002 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.059165 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 72 components and 0.059165 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.531 mas, bmaj=3.792 mas, bpa=-2.519 degrees
! Estimated noise=9.09964 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000531466 Jy
! Component: 100  -  total flux cleaned = -0.000560742 Jy
! Component: 150  -  total flux cleaned = -0.000535827 Jy
! Component: 200  -  total flux cleaned = -0.000468808 Jy
! Total flux subtracted in 200 components = -0.000468808 Jy
! Clean residual min=-0.001239 max=0.001120 Jy/beam
! Clean residual mean=0.000001 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.0586962 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 91 components and 0.0586962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015853Jy  sigma=0.028868
! Fit after  self-cal, rms=0.015845Jy  sigma=0.028855
wmodel /scr/pima/bp171a9_uvs/J1157+1902_C_map.mod
! Writing 91 model components to file: /scr/pima/bp171a9_uvs/J1157+1902_C_map.mod
wobs /scr/pima/bp171a9_uvs/J1157+1902_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a9_uvs/J1157+1902_C_uvs.fits
wwins /scr/pima/bp171a9_uvs/J1157+1902_C_map.win
! wwins: Wrote 3 windows to /scr/pima/bp171a9_uvs/J1157+1902_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000119648 Jy
! Component: 100  -  total flux cleaned = -8.03974e-05 Jy
! Component: 150  -  total flux cleaned = -2.45461e-05 Jy
! Component: 200  -  total flux cleaned = -6.38836e-06 Jy
! Component: 250  -  total flux cleaned = -2.28356e-05 Jy
! Component: 300  -  total flux cleaned = -6.24744e-06 Jy
! Component: 350  -  total flux cleaned = 4.14048e-05 Jy
! Component: 400  -  total flux cleaned = 8.76779e-05 Jy
! Component: 450  -  total flux cleaned = 5.74899e-05 Jy
! Component: 500  -  total flux cleaned = 2.84552e-05 Jy
! Component: 550  -  total flux cleaned = 5.69858e-05 Jy
! Component: 600  -  total flux cleaned = 9.93133e-05 Jy
! Component: 650  -  total flux cleaned = 0.000167916 Jy
! Component: 700  -  total flux cleaned = 0.000181483 Jy
! Component: 750  -  total flux cleaned = 0.000234174 Jy
! Component: 800  -  total flux cleaned = 0.000247041 Jy
! Component: 850  -  total flux cleaned = 0.000234597 Jy
! Component: 900  -  total flux cleaned = 0.000271998 Jy
! Component: 950  -  total flux cleaned = 0.000296496 Jy
! Component: 1000  -  total flux cleaned = 0.000296393 Jy
! Component: 1050  -  total flux cleaned = 0.000319708 Jy
! Component: 1100  -  total flux cleaned = 0.00030804 Jy
! Component: 1150  -  total flux cleaned = 0.000285392 Jy
! Component: 1200  -  total flux cleaned = 0.000274034 Jy
! Component: 1250  -  total flux cleaned = 0.000252232 Jy
! Component: 1300  -  total flux cleaned = 0.000252304 Jy
! Component: 1350  -  total flux cleaned = 0.000252233 Jy
! Component: 1400  -  total flux cleaned = 0.000231391 Jy
! Component: 1450  -  total flux cleaned = 0.000252258 Jy
! Component: 1500  -  total flux cleaned = 0.00028286 Jy
! Component: 1550  -  total flux cleaned = 0.000292995 Jy
! Component: 1600  -  total flux cleaned = 0.000303014 Jy
! Component: 1650  -  total flux cleaned = 0.000322723 Jy
! Component: 1700  -  total flux cleaned = 0.000332512 Jy
! Component: 1750  -  total flux cleaned = 0.00036124 Jy
! Component: 1800  -  total flux cleaned = 0.000370836 Jy
! Component: 1850  -  total flux cleaned = 0.000380103 Jy
! Component: 1900  -  total flux cleaned = 0.00040764 Jy
! Component: 1950  -  total flux cleaned = 0.000434936 Jy
! Component: 2000  -  total flux cleaned = 0.000453001 Jy
! Component: 2050  -  total flux cleaned = 0.000488563 Jy
! Component: 2100  -  total flux cleaned = 0.000488647 Jy
! Component: 2150  -  total flux cleaned = 0.00051466 Jy
! Component: 2200  -  total flux cleaned = 0.000514619 Jy
! Component: 2250  -  total flux cleaned = 0.000548705 Jy
! Component: 2300  -  total flux cleaned = 0.000523339 Jy
! Component: 2350  -  total flux cleaned = 0.000556788 Jy
! Component: 2400  -  total flux cleaned = 0.000564938 Jy
! Component: 2450  -  total flux cleaned = 0.000589466 Jy
! Component: 2500  -  total flux cleaned = 0.000581316 Jy
! Component: 2550  -  total flux cleaned = 0.000581264 Jy
! Component: 2600  -  total flux cleaned = 0.000605239 Jy
! Component: 2650  -  total flux cleaned = 0.000589449 Jy
! Component: 2700  -  total flux cleaned = 0.000605157 Jy
! Component: 2750  -  total flux cleaned = 0.000605124 Jy
! Component: 2800  -  total flux cleaned = 0.000589771 Jy
! Component: 2850  -  total flux cleaned = 0.000597363 Jy
! Component: 2900  -  total flux cleaned = 0.000582296 Jy
! Component: 2950  -  total flux cleaned = 0.000574804 Jy
! Component: 3000  -  total flux cleaned = 0.000552458 Jy
! Component: 3050  -  total flux cleaned = 0.000567223 Jy
! Component: 3100  -  total flux cleaned = 0.000537965 Jy
! Component: 3150  -  total flux cleaned = 0.00051624 Jy
! Component: 3200  -  total flux cleaned = 0.000494753 Jy
! Component: 3250  -  total flux cleaned = 0.000516146 Jy
! Component: 3300  -  total flux cleaned = 0.000473753 Jy
! Component: 3350  -  total flux cleaned = 0.000494784 Jy
! Component: 3400  -  total flux cleaned = 0.000494737 Jy
! Component: 3450  -  total flux cleaned = 0.0005016 Jy
! Component: 3500  -  total flux cleaned = 0.000494734 Jy
! Component: 3550  -  total flux cleaned = 0.00050833 Jy
! Component: 3600  -  total flux cleaned = 0.00050831 Jy
! Component: 3650  -  total flux cleaned = 0.000515003 Jy
! Component: 3700  -  total flux cleaned = 0.000501695 Jy
! Component: 3750  -  total flux cleaned = 0.0005083 Jy
! Component: 3800  -  total flux cleaned = 0.000508306 Jy
! Component: 3850  -  total flux cleaned = 0.000521342 Jy
! Component: 3900  -  total flux cleaned = 0.000527777 Jy
! Component: 3950  -  total flux cleaned = 0.000527747 Jy
! Component: 4000  -  total flux cleaned = 0.000534101 Jy
! Component: 4050  -  total flux cleaned = 0.000508736 Jy
! Total flux subtracted in 4096 components = 0.000502464 Jy
! Clean residual min=-0.000324 max=0.000353 Jy/beam
! Clean residual mean=-0.000000 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.0591987 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 386 components and 0.0591987 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a9_uvs/J1157+1902_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.531 x 3.792 at -2.519 degrees (North through East)
! Clean map  min=-0.00068856  max=0.04673 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a9_uvs/J1157+1902_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0467302 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000105069 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.674523 0.674523 1.34905 2.69809 5.39619 10.7924 21.5848 43.1695 86.339
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.046 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  444.758 
quit
! Quitting program
! Log file /scr/pima/bp171a9_uvs/J1157+1902_C_uvs.log closed on Sat Dec 21 09:13:10 2013