! Started logfile: /scr/pima/bp171a9_uvs/J1139-1405_C_uvs.log on Sat Dec 21 09:12:32 2013
obs /scr/pima/bp171a9_uvs/J1139-1405_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a9_uvs/J1139-1405_C_uva.fits
! AN table 1: 3 integrations on 21 of 21 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1139-1405
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 504 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a9_uvs/J1139-1405_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.006245Jy  sigma=2.719768
! Fit after  self-cal, rms=0.954331Jy  sigma=2.462662
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.348 mas, bmaj=10.92 mas, bpa=-10.34 degrees
! Estimated noise=19.4018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0442488 Jy
! Component: 100  -  total flux cleaned = 0.0603975 Jy
! Total flux subtracted in 100 components = 0.0603975 Jy
! Clean residual min=-0.010026 max=0.010097 Jy/beam
! Clean residual mean=-0.000045 rms=0.004006 Jy/beam
! Combined flux in latest and established models = 0.0603976 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.0603976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034446Jy  sigma=0.126759
! Fit after  self-cal, rms=0.032538Jy  sigma=0.124882
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.363 mas, bmaj=11.21 mas, bpa=-7.936 degrees
! Estimated noise=13.8655 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119961 Jy
! Component: 100  -  total flux cleaned = 0.0187197 Jy
! Component: 150  -  total flux cleaned = 0.0229373 Jy
! Component: 200  -  total flux cleaned = 0.0258941 Jy
! Total flux subtracted in 200 components = 0.0258941 Jy
! Clean residual min=-0.004917 max=0.004938 Jy/beam
! Clean residual mean=-0.000023 rms=0.002610 Jy/beam
! Combined flux in latest and established models = 0.0862917 Jy
! Performing phase self-cal
! Adding 118 model components to the UV plane model.
! The established model now contains 152 components and 0.0862917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022045Jy  sigma=0.065535
! Fit after  self-cal, rms=0.021542Jy  sigma=0.064887
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.363 x 11.21 at -7.936 degrees (North through East)
! Clean map  min=-0.0079767  max=0.05356 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     KP        0.98     LA        0.97     
!   NL        1.05     OV        1.01     PT        0.93     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.11     KP        0.93     LA        1.01     
!   NL        0.98     OV        0.96     PT        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        0.92     KP        0.94     LA        0.89     
!   NL        0.94     OV        0.93     PT        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.021542Jy  sigma=0.064887
! Fit after  self-cal, rms=0.021263Jy  sigma=0.063212
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.371 mas, bmaj=11.3 mas, bpa=-8.085 degrees
! Estimated noise=13.557 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349505 Jy
! Component: 100  -  total flux cleaned = 0.00604852 Jy
! Component: 150  -  total flux cleaned = 0.00699236 Jy
! Component: 200  -  total flux cleaned = 0.00839222 Jy
! Total flux subtracted in 200 components = 0.00839222 Jy
! Clean residual min=-0.002183 max=0.002189 Jy/beam
! Clean residual mean=-0.000007 rms=0.001101 Jy/beam
! Combined flux in latest and established models = 0.0946839 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 243 components and 0.0946839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018918Jy  sigma=0.053334
! Fit after  self-cal, rms=0.018821Jy  sigma=0.053166
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018821Jy  sigma=0.053166
! Fit after  self-cal, rms=0.018680Jy  sigma=0.050550
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.362 mas, bmaj=11.31 mas, bpa=-8.118 degrees
! Estimated noise=13.6813 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00083964 Jy
! Component: 100  -  total flux cleaned = 0.00139812 Jy
! Component: 150  -  total flux cleaned = 0.00159218 Jy
! Component: 200  -  total flux cleaned = 0.00208148 Jy
! Total flux subtracted in 200 components = 0.00208148 Jy
! Clean residual min=-0.001295 max=0.001304 Jy/beam
! Clean residual mean=-0.000005 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.0967654 Jy
selfcal
! Performing phase self-cal
! Adding 95 model components to the UV plane model.
! The established model now contains 330 components and 0.0967654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017900Jy  sigma=0.046913
! Fit after  self-cal, rms=0.017879Jy  sigma=0.046863
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000633878 Jy
! Component: 100  -  total flux cleaned = 0.000502316 Jy
! Component: 150  -  total flux cleaned = 7.51866e-05 Jy
! Component: 200  -  total flux cleaned = -0.000204197 Jy
! Total flux subtracted in 200 components = -0.000204197 Jy
! Clean residual min=-0.000898 max=0.000895 Jy/beam
! Clean residual mean=-0.000003 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0965612 Jy
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 393 components and 0.0965612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017547Jy  sigma=0.045504
! Fit after  self-cal, rms=0.017539Jy  sigma=0.045476
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017539Jy  sigma=0.045476
! Fit after  self-cal, rms=0.017426Jy  sigma=0.044243
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.329 mas, bmaj=11.3 mas, bpa=-8.222 degrees
! Estimated noise=13.8528 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159099 Jy
! Component: 100  -  total flux cleaned = 0.00181209 Jy
! Component: 150  -  total flux cleaned = 0.00187856 Jy
! Component: 200  -  total flux cleaned = 0.00176768 Jy
! Total flux subtracted in 200 components = 0.00176768 Jy
! Clean residual min=-0.000910 max=0.000915 Jy/beam
! Clean residual mean=-0.000004 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.0983289 Jy
selfcal
! Performing phase self-cal
! Adding 119 model components to the UV plane model.
! The established model now contains 489 components and 0.0983289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017132Jy  sigma=0.042362
! Fit after  self-cal, rms=0.017131Jy  sigma=0.042347
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000288086 Jy
! Component: 100  -  total flux cleaned = -0.000381782 Jy
! Component: 150  -  total flux cleaned = -0.000738341 Jy
! Component: 200  -  total flux cleaned = -0.000821225 Jy
! Total flux subtracted in 200 components = -0.000821225 Jy
! Clean residual min=-0.000664 max=0.000662 Jy/beam
! Clean residual mean=-0.000002 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.0975077 Jy
! Performing phase self-cal
! Adding 91 model components to the UV plane model.
! The established model now contains 559 components and 0.0975077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016992Jy  sigma=0.041487
! Fit after  self-cal, rms=0.016992Jy  sigma=0.041475
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016992Jy  sigma=0.041475
! Fit after  self-cal, rms=0.016934Jy  sigma=0.040963
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.052 mas, bmaj=11.65 mas, bpa=-6.598 degrees
! Estimated noise=13.5035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000803736 Jy
! Component: 100  -  total flux cleaned = 0.000805477 Jy
! Component: 150  -  total flux cleaned = 0.000612483 Jy
! Component: 200  -  total flux cleaned = 0.000751133 Jy
! Total flux subtracted in 200 components = 0.000751133 Jy
! Clean residual min=-0.000715 max=0.000715 Jy/beam
! Clean residual mean=-0.000003 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.0982588 Jy
selfcal
! Performing phase self-cal
! Adding 121 model components to the UV plane model.
! The established model now contains 661 components and 0.0982588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016822Jy  sigma=0.039836
! Fit after  self-cal, rms=0.016825Jy  sigma=0.039826
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000227904 Jy
! Component: 100  -  total flux cleaned = -0.000416943 Jy
! Component: 150  -  total flux cleaned = -0.000628469 Jy
! Component: 200  -  total flux cleaned = -0.000955973 Jy
! Total flux subtracted in 200 components = -0.000955973 Jy
! Clean residual min=-0.000530 max=0.000529 Jy/beam
! Clean residual mean=-0.000003 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.0973029 Jy
! Performing phase self-cal
! Adding 92 model components to the UV plane model.
! The established model now contains 737 components and 0.0973028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016764Jy  sigma=0.039254
! Fit after  self-cal, rms=0.016763Jy  sigma=0.039249
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.309 mas, bmaj=11.3 mas, bpa=-8.289 degrees
! Estimated noise=13.9577 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.309 x 11.3 at -8.289 degrees (North through East)
! Clean map  min=-0.0035798  max=0.049596 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.305 mas, bmaj=11.01 mas, bpa=-10.6 degrees
! Estimated noise=19.443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.045387 Jy
! Component: 100  -  total flux cleaned = 0.0635027 Jy
! Component: 150  -  total flux cleaned = 0.072949 Jy
! Component: 200  -  total flux cleaned = 0.0815371 Jy
! Total flux subtracted in 200 components = 0.0815371 Jy
! Clean residual min=-0.006383 max=0.006397 Jy/beam
! Clean residual mean=-0.000029 rms=0.002786 Jy/beam
! Combined flux in latest and established models = 0.0815371 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 95 model components to the UV plane model.
! The established model now contains 95 components and 0.0815371 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.309 mas, bmaj=11.3 mas, bpa=-8.289 degrees
! Estimated noise=13.9577 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00524428 Jy
! Component: 100  -  total flux cleaned = 0.00726437 Jy
! Component: 150  -  total flux cleaned = 0.00854864 Jy
! Component: 200  -  total flux cleaned = 0.010551 Jy
! Total flux subtracted in 200 components = 0.010551 Jy
! Clean residual min=-0.003821 max=0.003831 Jy/beam
! Clean residual mean=-0.000016 rms=0.002056 Jy/beam
! Combined flux in latest and established models = 0.0920881 Jy
! Adding 125 model components to the UV plane model.
! The established model now contains 215 components and 0.0920881 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.052 mas, bmaj=11.65 mas, bpa=-6.598 degrees
! Estimated noise=13.5035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00249612 Jy
! Component: 100  -  total flux cleaned = 0.00417148 Jy
! Component: 150  -  total flux cleaned = 0.00525462 Jy
! Component: 200  -  total flux cleaned = 0.00608131 Jy
! Total flux subtracted in 200 components = 0.00608131 Jy
! Clean residual min=-0.002073 max=0.002071 Jy/beam
! Clean residual mean=-0.000008 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.0981695 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121138 Jy
! Component: 100  -  total flux cleaned = 0.0003311 Jy
! Component: 150  -  total flux cleaned = 0.00022801 Jy
! Component: 200  -  total flux cleaned = -4.64738e-05 Jy
! Total flux subtracted in 200 components = -4.64738e-05 Jy
! Clean residual min=-0.001490 max=0.001491 Jy/beam
! Clean residual mean=-0.000004 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.098123 Jy
! Adding 196 model components to the UV plane model.
! The established model now contains 403 components and 0.098123 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.309 mas, bmaj=11.3 mas, bpa=-8.289 degrees
! Estimated noise=13.9577 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.14645e-05 Jy
! Component: 100  -  total flux cleaned = -0.00038252 Jy
! Component: 150  -  total flux cleaned = -0.000634506 Jy
! Component: 200  -  total flux cleaned = -0.000692892 Jy
! Total flux subtracted in 200 components = -0.000692892 Jy
! Clean residual min=-0.000918 max=0.000918 Jy/beam
! Clean residual mean=-0.000002 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.0974301 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 480 components and 0.0974301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017176Jy  sigma=0.041152
! Fit after  self-cal, rms=0.017143Jy  sigma=0.041087
wmodel /scr/pima/bp171a9_uvs/J1139-1405_C_map.mod
! Writing 480 model components to file: /scr/pima/bp171a9_uvs/J1139-1405_C_map.mod
wobs /scr/pima/bp171a9_uvs/J1139-1405_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a9_uvs/J1139-1405_C_uvs.fits
wwins /scr/pima/bp171a9_uvs/J1139-1405_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bp171a9_uvs/J1139-1405_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.309 x 11.3 at -8.289 degrees (North through East)
! Clean map  min=-0.00425  max=0.049607 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a9_uvs/J1139-1405_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0496071 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000442326 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.67498 2.67498 5.34995 10.6999 21.3998 42.7996 85.5992
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.049 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  112.15 
quit
! Quitting program
! Log file /scr/pima/bp171a9_uvs/J1139-1405_C_uvs.log closed on Sat Dec 21 09:12:36 2013